Test bugs vis bug26357 is revised to check colors in more robust way.
In tests bugs vis bug29091_*, size of produced file is checked to be within range of known valid sizes, rather than hard-coded (per-platform) exact sizes.
FPE signals are disabled for test bugs vis bug29127 to prevent exceptions cause by software OpenGl driver.
File data/occ/Box.brep is removed to avoid confusion with file box.brep in public data files used in tests.
Two additional non-alphabetic-order combinations of complex types are handled in RWStepAP214_ReadWriteModule.cxx
OSD_OpenStream() now uses __gnu_cxx::stdio_filebuf extension for opening UNICODE files on MinGW when using C++ file streams.
Variant accepting filebuf returns bool (true if succeeded and false otherwise).
Checks of ofstream to be opened made via calls to low-level ofstream::rdbuf() are replaced by calls to ofstream::is_open(); state of the stream is also checked (to be good).
Unicode name used for test file in test bugs fclasses bug22125 is described (for possibility to check it).
Test for 0028167: Fillet has strange form at its end
Test for 0028168: Exception is raised during Boolean operation
Test for 0028194: BRepMesh - Standard_OutOfRange exception on valid shape
Test for 0028200: Invalid topology of the general fuse result
Test for 0028216: Intersection of a face and a solid is broken up leading to empty result of Boolean common operation
Test for 0028245: Result of Cells Builder algorithm becomes invalid after removal of internal boundaries on faces
Test for 0028247: Effect of minSize parameter of BRepMesh_IncrementalMesh seems to be too strong
Test for 0028274: BOPAlgo_MakerVolume fails to create solid
Test for 0028279: Greater oscillations and higher degree of resulting B-Spline in cylinder-cylinder intersections in 7.1.0
Test for 0028354: Filleting destroys shape if the filleted edge touches a seam edge
Test for 0028366: BOP Common fails with solid and planar face
Test for 0028379: BRepMesh produces mangled mesh for a cone
Test for 0028388: Boolean common of simple face and solid results in empty compound
Test for 0028393: Boolean cut produce wrong result.
Test for 0028402: Modeling - calculation of properties of complex compounds is slow
Test for 0028406: High tolerances after boolean operation on OCCT 6.9.1
Test for 0028694: IGES reader produces too small edge covered by its vertices
Test for 0028719: Mesh - Display issue for special model
Test for 0028108: Sweep fails in "Right Corner" mode
Test for 0028696: Offset 2D algorithm produces micro edges
Test for 0028700: BRepBuilderAPI_Sewing produces too small edge covered by its vertices
Test for 0028722: Conversion of a spherical face to a spline produces an invalid shape
Test for 0028739: Draft on face fails
Test for 0028662: Data Exchange - Exception during reading large STEP file.
Test for 0028768: ShapeFix slighly corrupts the source face
Test for 0028485: Fuse of two shapes using gluing and non-destructive options gives invalid result
Test for 0028500: Artifact in shaded view of the shape
Test for 0028523: Fixshape reverses the orientation of the face
Test for 0028544: Big tolerance value is returned by Implicit-parametric algorithm
Test for 0028571: BRepOffsetAPI_MakeOffset build invalid wire
Test for 0028572: Wrong result of the mkface command
Test for 0028595: Shifting 2d curves for non-periodic surfaces leads to incorrect result.
Test for 0028596: Erroneous fillet
Test for 0028640: BRepBuilderAPI_Transform build invalid shape
Test for 0028656: 3d offset modifies the input shape
Test for 0000077: BUC60866. The BRepFill_Pipe fails.
Test for 0000078: BUC60875. Pipe is created incorrectly on two wires.
Test for 0000082: BUC60908. Incomplete section of shell by plane.
Test for 0000083: BUC60912. Section of simple BSpline surfaces is performed too slow.
Test for 0000862: GeomAPI_ExtremaCurveCurve fails on given curves
Test for 0002442: Error in BRepClass3d_SolidClassifier
Test for 0003936: Face on a surface of extrusion is extended after import to IGES
Test for 0005081: BRepOffset_MakeOffsetShape algorithm does not return valid result.
Test for 0005145: Wrong result of projection of a circle on a sphere.
Test for 0014846: ShapeFix_Wireframe::FixWireGaps() works wrong on a shape with seam edge
Test for 0016424: Exception in reading of attached IGES file
Test for 0010377: Incorrect fuse result when objects tangent by planar face
Test for 0013565: Incorrect result of Common operation
Test for 0013566: Incorrect result of Extrema between a large circle and a line
Test for 0024632: Artifacts during Boolean cut operation on neighboring parts
Test for 0005582: Impossible to make offset on the shape with degenerated edge
Protection against accessing null pointer is added in OpenGl_VertexBuffer::Create().
In command vreadpixel OpenGl-related warnings are redirected to cout so that they do not contaminate the command output.
Test grid caf presentation is configured to ignore OpenGl-related warning messages.
Tests in grid tools are configured to report status SKIPPED if tools are not available (OCCT is built without Qt).
Static function stepstrcmp() in StepData_StepReaderData.cxx is replaced by plain strcmp() to have the full strings compared (stepstrcmp() returned true if one of strings was longer than the other but common part was equal).
Protection is added to avoid exception for cases when representation entities are NULL
Prs3d_DatumAspect::DrawDatumPart() now handles new flag ToDrawArrows().
vtrihedron - added new option -arrowTip.
Fixed misprint in command description -arrowscolor -> -arrowcolor.
Approximation parameters: degmin, degmax, max number of segments, boundary condition, maximal distance of projecting are added in interface of classes ProjLib_ProjectedCurve, ProjLib_ComputeApprox,
ProjLib_ComputeApproxOnPolarSurface
Algorithm of Approx/Approx_ComputeCLine is modified in order to treat maximal number of segments allowed for cutting.
Algorithm of method BOPTools_AlgoTools2D::MakePCurveOnFace(...) is modified in order to manage cases with big edge tolerances.
Test case added
Some test cases were modified according to new behavior of algorithms
Some point were incorrectly removed from the Walking-line.
In the current fix, new method IntWalk_PWalking::RemoveAPoint(...) has been added and implemented in order to provide safe removing.
So, now methods AddAPoint(...) and RemoveAPoint(...) are recommended to use for work with the Walking-line.
Added method SelectMgr_SelectableObject::Selections() and depreacted methods
Init(), More(), Next() and CurrentSelection().
Added method SelectMgr_Selection::Entities() and depreacted methods
Init(), More(), Next() and Sensitivity().
SelectMgr_SelectableObject::myAssemblyOwner has been moved to AIS_MultipleConnectedInteractive.
SelectMgr_SelectableObject::Selection() now returns NULL handle for not found selection.
SelectMgr_SelectableObject::HasSelection() is no more virtual and just retuns !Selection().IsNull().
SelectMgr_SelectionManager::mySelectors map is now declared using proper
key type Handle(SelectMgr_ViewerSelector) instead of Handle(Standard_Transient).
Boolean Operations:
1. Face/Face intersection post treatment - Unify vertices put on the section curves, which were rejected as existing ones, with the vertices of edges by which these section curves have been rejected.
2. Extend Warnings Reporting system of Boolean operations with the new warnings:
- BOPAlgo_AlertIntersectionOfPairOfShapesFailed - to be added when the intersection of pair of sub-shapes of the arguments has failed;
- BOPAlgo_AlertBuildingPCurveFailed - to be added when the building of the 2D curve of the edge on face has failed;
- BOPAlgo_AlertAcquiredSelfIntersection - to be added when the positioning and tolerances of the arguments leads to creation of self-interfered shapes.
These new warnings allow completing the operation even if intersection of some of the sub-shapes or building of some of the PCurves has failed. Moreover, they allow getting the pairs of sub-shapes on which the intersection/projection has failed, providing the user ability to analyze the intersection results.
Note that if some of these warnings appear, the result of the operation should be carefully analyzed for validity.
3. Print messages for the Warnings/Errors met during checking of the shape on self-intersection ("bopcheck" command).
AIS_ConnectedInteractive now shares HLR computation code with AIS_Shape.
BRepTools_WireExplorer::Orientation() now returns TopAbs_FORWARD
instead of throwing exception in case of infinite Edge without vertices.
StdSelect_BRepSelectionTool::GetSensitiveForFace() now creates Select3D_SensitiveCurve
from 2 points in case of infinite Edge instead of Select3D_SensitiveFace.
ProjLib_ComputeApproxOnPolarSurface::BuildInitialCurve2d - Using the correct number of points (computed in GCPnts_QuasiUniformAbscissa class) for creation of the initial curve.
Make possibility to dramatically increase the step during iteration on the curve when the global resolution of the curve is too small.
Correct the functions FindParameters, FindBestSolution, FindDistPC.
The change caused improvement of the test case "boolean bfuse_complex E4", so the bug #27697 has been fixed.
The change caused dramatic improvement of the performance of the test "bugs modalg_7 bug27160", and the bug #29080 has been fixed.
Correct the method PerformCurve of GCPnts_QuasiUniformDeflection to get the proper derivative at the end of the current curve.
Improve the Draw commands "crvpoints" and "crvtpoints" so that to work with wires as composite curves.
Boolean Operations - when looking for the splitting parameters on the degenerated edges try not only the intersection of the 2D curve of degenerated edge with 2D curves of other edges bounded by the vertex of degenerated edge, but also the projection of the end points of the edges corresponding to the vertex on the 2d curve of degenerated edge.
Simple offset algorithm (BRepOffset_MakeSimpleOffset) is improved to handle the case when bspline surface has imprecise singularity at one of sides (when side is degenerated but not exactly to one point).
In such case, the algorithm tries to collapse all poles of singular side of the surface to the same point; this allows avoiding flapping of normal due to small fluctuations of surface.
If face being offset contains degenerated edges, then check for singularity is done using position and tolerance of corresponding vertices.
In addition, each side is checked with some user-defined tolerance (by default Precision::Confusion()); this helps to process cases when no edge is located at that side or if such edge is not encoded as degenerated.
New parameter Tolerance is introduced for that in BRepOffset_MakeSimpleOffset class.
Tests added:
bugs modelg_7 bug28968 - on isolated faces as reported in the issue, mostly for visual check (absence of loops)
offset simple F01-05 - on original shells, checking tolerances of resulting shell
Tests are added to control output and performance of progress indicator (bugs fclasses bug28478 and perf fclasses progress, respectively).
Implementation of class Draw_ProgressIndicator is improved to update indicator basing on achieved total progress (1% by default) instead of elapsed time since last update.
Method OSD_Chronometer::Restart() is fixed to actually reset the counter.
DRAW command readstl is improved to show progress indicator if configured (by command XProgress).
Description of class Message_ProgressIndicator is updated; code example is added in description of Message_ProgressSentry.
Synchronization of the ShapeAnalysis_Edge behavior with the BRepCheck_Edge by adding check for 2d curves on planes.
Implementation of the BRep_Tool::CurveOnPlane method to avoid code duplication for making PCurve of the edge on planar face.
Handling of degenerated points (with all derivatives zero) in GeomEvaluator_OffsetSurface is improved by iterative movement towards middle of the surface (extension of one-step approach implemented earlier in #28112).
OpenGl_PrimitiveArray::Render() - removed obsolete code, which become redundant (and broken)
after moving rendering of transparent objects into OpenGl_LayerList::renderTransparent().
Test for 0027049: Make non-destructive mode be defined by default in Boolean operations
Test for 0027052: Test boolean gdml_private ZI5 failure
Test for 0027069: IGES parser does not recognize comments in Parameters section
Test for 0027090: Point is classified IN solid but actually it is OUT
Test for 0027170: Reading STEP files produces invalid shapes
Test for 0027186: IGES - reconsider creation of Undefined entity in case of failure
Test for 0027214: Duplicate of test cases
Test for 0027224: Incorrect result of boolean operation in boolean bcut_complex Q1 test case
Test for 0027227: Intersection curve is not continued to the surface boundary
Test for 0027246: ShapeFix_Shape destroys shape
Test for 0027251: Shape becomes invalid when exported to STEP and imported back
Test for 0027316: exception when XAddShape
Test for 0027378: BRepLib_MakeFace produces invalid faces on periodic surfaces in case the given parametrization does not match the default
Test for 0027390: Box and Ellipsoid shape boolean cut and common introduce invalid result.
Test for 0028119: Blend fails on fused identical but shifted tori
Test for 0028144: Step reader - regression in comparison of version OCCT654
Test for 0028151: Sewing faces results in a shell with very big tolerance
Test for 0027160: Weird results of the pipe algorithm
Test for 0027623: Cannot find intersection line between two trimmed planar surfaces
Test for 0027683: Inaccurate result by bopcut
Test for 0027687: Section between shells of hull and deck is not closed
Test for 0027711: Blend-on-blend corrupts the shape
Test for 0027784: Thickness fails on cylinder with draft
Test for 0027908: Exception during offset computation
Test for 0027909: Exception during offset computation
Test for 0027910: Sharing between edges was lost after offset operation
Test for 0027911: Exception during offset computation
Test for 0027912: Exception during offset computation
Test for 0027928: BOP common produces empty compound
Test for 0027948: Cut produces unexcpected shape
Test for 0027950: Result of intersection algorithm depends too much on surface trim bounds
Test for 0027701: Crash when export empty solid to STEP
Test for 0027722: STEP error for Ellipse revol shape
DRAW command fixsmallfaces is added to fix (remove) small faces in the shape.
Command OCC22586 is removed (replaced by fixsmallfaces).
Test bug28112_2 using that command is added for the two last shapes in issue #28112; test bug28112 is renamed to bug28112_1.
Test bug22586 is changed to use the new command.
Test for 0025930: thickness of spherical cap is invalid
Test for 0025939: SIGSEGV in MakeThickSolid
Test for 0025940: MakeThickSolid creates C0 continuous edges
Test for 0026604: GeomFill_Pipe doesn't fit given bounds
Test for 0026655: ChFi3d_Builder algorithm fails to build fillets if some input edges connect with seam edges
Test for 0026697: BRepFeat_MakePrism returns empty compound
Test for 0026716: Mesher cannot create a mesh of brep model due to ShapeFix_Wire::FixShifted()
Test for 0026735: Adjacent perpendicular edges are detected as overlapped by DRAW command checkoverlap.
Test for 0026793: General Fuse algorithm produces incorrect result
Test for 0026795: Unable to perform General Fuse operation on the attached faces
Test for 0026842: bopsection result does not contain any edges.
Test for 0026882: Edge/Edge intersection algorithm produces incorrect result
Test for 0026883: Wrong result of Boolean Operation
Test for 0026889: Very poor mesh result from shape
Test for 0026928: Edges are meshed too coarsly
Test for 0026933: Section works unstably due to incorrect work of the method IsExistingPaveBlock
Test for 0026943: Wrong projection of helix on cylinder by ShapeConstruct_ProjectCurveOnSurface
Test for 0026957: Unify same domain operation is slow for multiple shells
Test for 0026978: Interactive selection is insensitive to swept shell
Test for 0027004: ShapeUpgrade_UnifySameDomain produces invalid result
Test for 0026280: Mechanism 'ShapeFix' is unable to heal a shape
Test for 0026282: Mechanism 'ShapeFix' has errors revealed by wire tool 'FixTails'
Test for 0026291: BRepMesh produces mesh with gap on the attached shape
Test for 0026382: BRepMesh produces internal nodes outside the face interior
Test for 0027453: Wrongly meshed surface
Test for 0027524: The command checkshape does not find the maximal deviation between curves representations
Test for 0026225: Wrong result of chamfer in case of coinciding bound of chamfer's surface with bound of a face
Test for 0026295: Sweep fails with BRepFill_ContactOnBorder
Test for 0026374: GeomFill_Profiler fails to unify BSplines if one has knot distance less than PConf
Test for 0026558: Failing to build isoline for offset surface
Test for 0026563: Boolean cut operation in new API multi-tool mode performs fuse instead of cut
Test for 0026568: Exception when creating pipe
Test for 0027419: Incorrect result of Edge/Face intersection
Test for 0027469: Regression vs 6.9.1: Wrong result of Edge/Face intersection
Test for 0027471: Wrong result of pipe
Test for 0027472: Wrong result of cut
Test for 0027614: Sewing returns result with too high tolerance
Test for 0026154: Visualization - v3d viewer grid disappears due to automatic z-fit
Test for 0026174: Loss of color after the second write of file (iges).
Boolean Operations algorithm - Added processing of the untouched edges (without edge set) in the UpdatePaveBlocks method.
IntCurvesFace_Intersector algorithm - Avoid calculation of the number of sample points on the surfaces with too small UV ranges.
Corrections: to use fixed shape as result in the non-manifold mode was made.
Regression was due to using modified initial shape as result in the previous version OCCT. At present initial shape is not modified during ShapeProcessing. Therefore modification to use fixed result was made.
Additionally using of nonManifold flag is added to ShapeProcessing.
Test for 0023838: Standard_OutOfRange in Geom_OffsetSurface::LocalDN (called by BRepFill_PipeShell)
Test for 0023866: GccAna_Circ2d3Tan does not find a circle
Test for 0023925: BRepFeat_SplitShape produces invalid shape
Test for 0023942: Pipe algorithms unrobust to number rounding
Test for 0025385: steep increase in tolerance by intersection
Test for 0025395: SIGSEGV in BRepOffsetAPI_MakeThickSolid
Test for 0025458: can a sweep be used to create 1-fold tori (using a closed wire as path)
Test for 0025478: Fillets can not touch
Test for 0025481: Edge must not contain obsolete curve representations
Test for 0025515: Boolean operation become worse for unknown reason.
Test for 0025521: Fillet creates shell with bad orientation of SubShape
Test for 0025551: BRepMesh can produce internal nodes outside the face interior based on distorted BSpline surface
Test for 0025586: Poor mesh quality, or failure of meshing for closed extruded surfaces with holes
Test for 0025626: Loft of ellipses shows wrinkle near seam edge
Test for 0025628: BRepMesh fails to mesh face with open wire, considered as correct by checkshape
Test for 0025693: Wire of BSplines fails bopcheck
Test for 0025730: result of MakeThickSolid aborts the BOPCheck in Geom_OffsetSurface::SetD0
Test for 0025738: BRepMesh fails to produce correct mesh for the face
Test for 0025776: HLR returns intersecting edges in OutLineV of helical sweep
Test for 0025798: BRepFeat_SplitShape returns invalid result
Test for 0025817: crescent face is not meshed
Test for 0025827: BRepMesh does not synchronize parameters of glued vertices on small edges
Test for 0025837: Bad triangulation when IGES loaded in meters
Test for 0025852: Text to BRep algorithm produces bad faces for circled symbols
Test for 0025856: BRepOffsetAPI_ThruSections returns an invalid shape if one wire contains degenerated edges
Test for 0025879: result of blend fails the bopcheck
Test for 0025967: Shape Healing fails to correct a face with missing poles and pcurves
Test for 0026052: Missing pcurves are computed incorrectly on two connected faces laying on the same surface
Test for 0025061: BRepMesh should skip internal wires with self intersections to produce mesh for the shape anyway
Test for 0024490: Computed surface properties differ substantially depending on NaturalRestriction flag
Test for 0024568: Split shape produces an invalid result
Test for 0024692: fuseedge corruption of spherical edge
Test for 0024772: Intersection of cylinder and cone produces incorrect results
Test for 0024954: BRepBuilderAPI_MakeFace adds wire with aribitary orientation
Test for 0025104: Prism from BSpline curve can not be chamfered
Test for 0025206: Fillet creates edge with C0 continuity
Test for 0025979: fillet creates faces with non-closed wires
Test for 0025983: Fusion of sweep and its mirror invalid
Test for 0025994: Boolean fuse result in invalid result.
Test for 0026034: Result of revolution aborts the bopcheck if translated
Test for 0026077: nurbsconvert of psphere fails the bopargcheck
Test for 0025989: toridial surface gets damaged in STEP export
Protection of the Edge/Edge intersection algorithm (IntTools_EdgeEdge) from incomplete type conversion due to presence of the Trimmed curves by using Adaptors for getting typed curves instead of direct casting.
Test case for the issue.
Methods D0, D1, D2, D3, DN of the class GeomEvaluator_OffsetSurface are extended by additional tweak to compensate failure of normal calculation in degenerated points on triangular surfaces.
If the point where normal has failed to calculate is located on parametric boundary of the base surface, one more attempt is made with the point shifted towards interior by Precision::PConfusion().
