1. Algorithm of Restriction line decomposition has been created.
2. Algorithm of check of coincidences between Walking and Restriction line has been improved in new function IsCoincide(...) (which replaces IsIn2DBox(...)).
3. Some useful methods have been added in IntPatch_PointLine (and inherited) classes.
Test cases for this issue have been created.
1. Intersection curve was not bounded by faces domain. It was the reason of big edge tolerance. This problem has been fixed.
2. Interface bopcurves DRAW-command has been changed in order to make possible to reproduce intersection problem.
Creation of test case for this issue.
This branch contains fixes for 26675 and 26431 bugs.
1. Normalization has been eliminated.
2. Interfaces of AppDef_Compute::Parametrization(...) and BRepAlgo_BooleanOperations::SetApproxParameters() methods have been changed.
3. Overloaded methods for ApproxInt_Approx::SetParameters(...), TopOpeBRepTool_GeomTool::GetTolerances(...) and TopOpeBRepTool_GeomTool::SetTolerances(...) have been removed (because some fields of these classes are not used more).
4. Comments for some methods have been changed in BRepApprox_TheMultiLineOfApprox.hxx and GeomInt_TheMultiLineOfWLApprox.hxx files.
5. Some fields have been deleted from ApproxInt_MultiLine class. Kept members have become constant.
6. Interface of ksection DRAW-command has been changed.
7. Now, 2dintersect DRAW-command prints information about found segments.
8. Some code fragments have been rewritten to make them easier.
9. Algorithm of splitting WLine, which goes through pole of sphere has been improved.
10. Improve approximation algorithm in order to it will compute correct 2D- and 3D-tangent at the end of bezier constraints (including case when curve goes through or finishes on singular points).
11. Interface of IntPatch_WLine::Dump(...) method has been corrected.
12. Some methods for working with Walking-line are made more universal (available for both GeomInt and IntTools packages).
13. Problem in BRepLib::SameParameter(...) method has been fixed (see corresponding comment).
14. Small correction in Draft package.
15. Any outputs in IntPatch_Intersection::Dump(...) method have become disabled because they are useless. If anybody need in this outputs he/she will correct this method himself/herself.
Adjusting some test cases according to their new behavior.
Creation of new test cases.
----------------------------------------------------------------------------------------------------------------------------
Some explanation of new behavior of some test cases:
1. Regressions:
a) blend simple X4
The problem is described in the issue #0026740. According to this description, the result on the current MASTER seems to be wrong indeed.
b) boolean bcommon_complex C7 and boolean bcut_complex Q1
These test case use same shapes with different Boolean operation (COMMON and CUT). They are already BAD (on the MASTER). Now, some sub-shapes have become not-shared, simply. In my opinion, we shall apply new behavior of these tests.
c) boolean bsection M3
The problem described in the issue #0026777 exists even on the current MASTER.
d) boolean bsection M9
The problem is described in the message http://tracker.dev.opencascade.org/view.php?id=26815#c47546. Here, we have really regression in the picture.
e) boolean bsection N2
The problem is described in issue #0026814.
f) boolean volumemaker G1
The problem is described in issue #26020.
g) bugs modalg_1 bug1255 (and bug1255_1)
The problem is described in issue #26815.
h) bugs modalg_2 bug5805_18, bugs modalg_2 bug5805_42, bugs modalg_2 bug5805_46
The problem is described in issue #25925.
i) bugs modalg_3 bug602
The problem is describes in issue #602.
j) bugs modalg_5 bug24915
The problem is described in the message http://tracker.dev.opencascade.org/view.php?id=25929#c48565. It is not fixed by this issue.
k) bugs modalg_5 bug25838
The main reason is described in issue #0026816.
----------------------------------------------------------------------------
2. Improvements:
a) boolean volumemaker F9
b) bugs modalg_1 bug10160_3
c) bugs modalg_2 bug22557
d) bugs modalg_5 bug25319_1 (_2)
e) draft angle G2
f) offset shape A1
g) offset with_intersect_80 N7
1. Algorithm of Restriction line processing has been improved in IntTools_FaceFace.cxx file.
2. Algorithm of checking, if Restriction line and Walking line are coincided has been improved in IntPatch_ImpPrmIntersection.cxx file.
3. Algorithm of extending check if starting point of Walking line is a tangent point has been added.
Small correction of some test cases.
Creation of test case for issue #0026699.
Small correction of test case for issue CR26699
Walking line method extraction into separate class IntTools_WLineTool.
New purging method of walking line had been added. Now point which are out of bounds are deleted.
Minor corrections.
Test case for issue CR26775
The main reason of the bug is incorrect extending line in SeveralWlinesProcessing(...) function.
Additionally, interface of IntPatch_WLine::Dump(...) method has been changed.
Change some test cases according to their new behavior.
Test-case for issue #26621
I ComputePurgedWLine() function:
Excess points in walking line are deleted when:
1) Distance between neighboring points too small.
2) Points lie in one pipe without big jump on chord length.
III
Fixed problem with extremaPC with too close knot distribution to [minParam, maxParam] borders.
IV ApproxInt_Approx.gxx
New division criteria in intersection approximator.
III Test case
Test cases update to the new behavior.
Test case for CR21564
Correction of test cases for issue CR21564
Computing is unified. ComputeFastTol3d() method was deleted.
If intersection result contains 3D- and corresponded two 2D-curves then tolerance will be computed with using BRepLib_CheckCurveOnSurface algorithm (check same-parameter).
If intersection result contains only 3D-curve (getting 2D-curve can be switched off by users) then tolerance will be computed with using GeomAPI_ProjectPointOnSurf algorithm (projects some point of 3D-curve on the surface and finds maximal distance).
Some workarounds have been deleted.
Some test case have been changed.
1. JoinWLines algorithm has been improved.
2. Reference to the V-boundaries is deleted when computing step.
3. Decreasing the tolerance when computing parameters of WLine.
4. Adding boundary point is forbidden if it lies in prolongation of found ones.
5. Possible reason of exception has been eliminated.
6. Processing of critical point has been improved.
Test cases for this issue have been created.
Correction of some test case(s).
Test case bugs/modalg_6/bug26310_4 is added
Update of test-cases for issue #26310
Adaptations for compiling with GCC 4.7 and 4.8:
- Construction semantics is used for Handle objects being initialized by const Handle objects of derived type, to avoid overload resolution error in GCC 4.7.
- Missing includes added.
- Fixed bugs related to misuse of direct casts of handle.
- Eliminate CLang warnings on uninitialized and unused variables, functions, and expressions
Automatic upgrade of OCCT code by command "occt_upgrade . -nocdl":
- WOK-generated header files from inc and sources from drv are moved to src
- CDL files removed
- All packages are converted to nocdlpack
Automatic update by command "occt_upgrade . -downcast"
C-style cast of Handle to that of derived type (now illegal) is replaced by call to DownCast()
Const reference local variables of Handle type initialized by result of DownCast are replaced by normal variables.
Check the validity of the intersection point between Faces.
Test case for issue CR26316
Correction of the test case for the issue.
Small correction of test case for issue CR26316
1. Restriction line is processed in IntTools_FaceFace with using methods of GeomInt_IntSS class.
2. Check, if Restriction- and Walking-lines (or Restriction-Restriction lines) are coincided, has been added in IntPatch_ImpPrmIntersection.cxx (at that RLine is considered to be isoline only).
3. Check, if RLine and GLine are coincided, has been added in IntPatch_ImpImpIntersection.cxx.
4. Create new class IntPatch_PointLine, which is inherited from IntPatch_Line.
5. The reason of exception (in DEBUG MODE) has been eliminated.
New test cases for issue #25416 were added.
tests/bugs/modalg_5/bug24650 was modified.
Changes:
class IntTools_FaceFace
- method:
void IntTools_FaceFace::Perform(const TopoDS_Face& aF1,
const TopoDS_Face& aF2)
The treatment of infinite planes was corrected.
Test case for issue CR25818
1. Curve boundaries were more precised.
2. Some test cases were changed in accordance of their new behavior.
3. Code fragment for WLines joining was moved to higher level (for more universal using in the future).
Code was changed in accordance with the last remark.
Added test cases bugs/modalg_5/bug25715_1 bug25715_2 bug25715_3
1. The tool of computing the max distance between 3D curve and its 2d representation on the face
has been moved from static methods in BOPTools_AlgoTools class to BRepLib_CheckCurveOnSurface class.
2. The tools has been applied to 2d curves built during Boolean Operation
and to some intersection curves.
3. The functions
Standard_Boolean BOPTools_AlgoTools::ComputeTolerance
(const TopoDS_Face& theFace,
const TopoDS_Edge& theEdge,
Standard_Real& theMaxDist,
Standard_Real& theMaxPar)
and
Standard_Boolean IntTools_Tools::ComputeTolerance
(const Handle(Geom_Curve)& theCurve3D,
const Handle(Geom2d_Curve)& theCurve2D,
const Handle(Geom_Surface)& theSurf,
const Standard_Real theFirst,
const Standard_Real theLast,
Standard_Real& theMaxDist,
Standard_Real& theMaxPar)
have been developed for easy access to BRepLib_CheckCurveOnSurface functionality.
class IntTools_FaceFace
method void IntTools_FaceFace::ComputeTolReached3d()
Case for Plane/BSpline intersection added for treatment.
Test case for issue CR25597
Fix for regression boolean bsection N7.
class BOPAlgo_PaveFiller
method
void BOPAlgo_PaveFiller::UpdateFaceInfo
(BOPDS_DataMapOfPaveBlockListOfPaveBlock& theDME,
const BOPCol_DataMapOfIntegerInteger& theDMV)
Updating Face Info information with new vertices created in PostTreatFF.
Correction boolean/bsection/N2
Updated test cases.
Changes:
1. class IntTools_FaceFace
method:
void IntTools_FaceFace::MakeCurve(const Standard_Integer Index,
const Handle(Adaptor3d_TopolTool)& dom1,
const Handle(Adaptor3d_TopolTool)& dom2)
The value of testing parameter has been changed for the cases of infinite curves
Test case for issue CR25456
Macros ending on "DEB" are replaced by OCCT_DEBUG across OCCT code; new macros described in documentation.
Macros starting with DEB are changed to start with "OCCT_DEBUG_".
Some code cleaned.
class IntTools_FaceFace
method
static Standard_Boolean DecompositionOfWLine(const Handle(IntPatch_WLine)& theWLine,
const Handle(GeomAdaptor_HSurface)& theSurface1,
const Handle(GeomAdaptor_HSurface)& theSurface2,
const TopoDS_Face& theFace1,
const TopoDS_Face& theFace2,
const IntTools_LineConstructor& theLConstructor,
const Standard_Boolean theAvoidLConstructor,
IntPatch_SequenceOfLine& theNewLines,
Standard_Real& theReachedTol3d,
const Handle(IntTools_Context)& aContext)
Correct treatment of WLines with only one point before or after the boundary point.
Test case for issue CR25002
class IntTools_FaceFace
method
void IntTools_FaceFace::Perform(const TopoDS_Face& aF1,
const TopoDS_Face& aF2)
Change the approximation flags according to the order of faces.
Test case for issue CR25019
class IntTools_Tools
method
Standard_Boolean IntTools_Tools::AdjustPeriodic
(const Standard_Real thePar,
const Standard_Real theParMin,
const Standard_Real theParMax,
const Standard_Real thePeriod,
Standard_Real &theNewPar,
Standard_Real &theOffset,
const Standard_Real theEps)
The new function has been implemented for fast adjustment of pcurves to the range of surface.
Test case correction for issue CR24981
Classes BOPInt_Context, BOPInt_ShrunkRange, BOPInt_Tools have been removed.
Package BOPInt has been removed
Classes IntTools_Context, IntTools_ShrunkRange have been added to replace corresponding BOPInt_ classes.
The classes provide same functionality as corresponding BOPInt_ classes.
Classes :
BOPAlgo_ArgumentAnalyzer
BOPAlgo_Builder
BOPAlgo_BuilderArea
BOPAlgo_BuilderFace
BOPAlgo_BuilderSolid
BOPAlgo_CheckerSI
BOPAlgo_PaveFiller
BOPAlgo_ShellSplitter
BOPTools_AlgoTools3D
BRepFill_TrimShellCorner
IntTools_BeanFaceIntersector
IntTools_EdgeFace
IntTools_FaceFace
IntTools_Tools
have been modified to use new classes IntTools_Context IntTools_ShrunkRange
Class IntTools_Tools has been modofied to provide the functionality that was in BOPInt_Tools.
Range of changing of some analytic curves is computed by other methods. It allows computing face's boundaries with more precise.
Tolerance was increased to provide successful work of some algorithms.
Functions BRepOffsetAPI_MiddlePath::Build() and ApproxWithPCurves(...) (file IntTools_FaceFace.cxx) were changed according to new result of algorithm's work.
It is possibly for "outboundaried faces" (see bug#23675) to compute incorrect UV-Bounds, when first parameter is more than last. To avoid it, extended control of computed bounds was added.
Function for fail sameparameter fixing was added to HLRAppli_ReflectLines to avoid creation bad shapes after algorithm's work.
In file ShapeFix_ComposeShell.cxx only text formatting was changed.
Some test cases are changed according to their new behavior.
Added test case bugs/moddata_3/bug23511
class IntAna_QuadQuadGeo
The changes have been done to provide the treatment the cases
when the value of the angle between the planes is small and
the origin of intersection line should be refined.
class IntTools_FaceFace
The changes have been done to provide the treatment of faces
in cases when both are based on planar surfaces.
The UV-bounds have been extended to provide correct solutions
as it has been done for all other cases with plane-based faces.
Added test case bugs/modalg_5/bug24914
Modified length of result shape in test case bugs/modalg_1/bug10232
class IntTools_FaceFace
- statc function:
void CorrectSurfaceBoundaries(const TopoDS_Face& theFace,
const Standard_Real theTolerance,
Standard_Real& theumin,
Standard_Real& theumax,
Standard_Real& thevmin,
Standard_Real& thevmax)
The faces based on cylidrical surface has been added to the list of candidates to extend the boundaries
Test case for issue CR24851
License statement text corrected; compiler warnings caused by Bison 2.41 disabled for MSVC; a few other compiler warnings on 54-bit Windows eliminated by appropriate type cast
Wrong license statements corrected in several files.
Copyright and license statements added in XSD and GLSL files.
Copyright year updated in some files.
Obsolete documentation files removed from DrawResources.
Modifications:
1. The validity of the intersection point between edge and face is checked with sum of the tolerance values of the edge and face.
2. The intersection between toroidal surface and one of the following surfaces: Plane, Cylinder, Sphere, Cone or Torus
is treated as analytical in the following cases:
1) Torus and Plane: a. Axes of the surfaces are parallel;
b. Axes of the surfaces are perpendicular and location of the torus is lying on the plane;
2) Torus and Sphere: The location of the sphere is lying on the line made from toruses axis;
3) Torus and Cone, Cylinder or Torus: The axis of the surfaces are collinear.
In all cases the intersection line(s) is(are) circle(s).
Added test cases bugs/modalg_5/bug24470
The intersection between torus with minor radius more than (or equal to) the major radius and any other surface is considered as parametric.
Changes:
class IntTools_FaceFace
- static function:
void CorrectSurfaceBoundaries(const TopoDS_Face& theFace,
const Standard_Real theTolerance,
Standard_Real& theumin,
Standard_Real& theumax,
Standard_Real& thevmin,
Standard_Real& thevmax)
Remove unnecessary broadening of UV-bounds for the faces based on the sperical surfaces.
Test case for issue CR24400
Fix first subset of warnings (about 100)
- while(1) and similar constructs replaced by for(;;)
- some uninitialized variables corrected
Got rid of Warning C4189: local variable is initialised but not referenced
Corrected mistakes after getting rid of C4189 compiler warning
Corrected some mistakes that led to compiling errors
Fixed test case because of improvement message - removed unnecessary TODO.
Small fix: tabs have been replaced with whitespaces.
Added TODO for Windows platform
removed last TODO
Corrected mistakes, returned some #ifdef DEB code, fixed test case .
Restoring a few places which have been modified too much
Small grammar fix
Deleted unnecessary puts in bugs/end
Modifications:
- BRepOffset/BRepOffset_Tool.cxx, Features and Fillets algorithms have been ported on new BO algorithm.
- Old BO algorithm, that was implemented in BOP, BooleanOperations and BOPTools packages, has - been deleted.
- Porting SALOME algorithms to new BOP algorithm.
- Fixing regressions. Rebased on current master.
- Corrections in post treatment of section edges;
- Corrections in the accordance with the bug 0023293;
- Small corrections in the bopcheck and bopargcheck commands.
- NCollection maps have been replaced by NCollection indexed maps to guarantee the constant order of sub-shapes in the result of boolean operation.
- Test case feat featprism M9 has been fixed.
- Test cases chl 902 E3 H3 have been fixed (corrections in the treatment of section edges).
- Test cases caf driver B6 B7, caf named_shape F6 F7 have been modified according to the new order of sub-shapes in the result of boolean operation.
- Test cases blend buildevol G1, blend simple K4, bcommon_complex C7, feat featprism L6 have been modified as they are improvements.
- Test case boolean bsection A3 has been modified according to the new syntax of the bsection command.
- Test cases boolean bfuse_complex J1 P9 have been fixed (the function IsInternalFace has been modified to use the function GetFaceOff);
- Test case chl 902 H3 has been fixed (changes in the treatment of section edges);
- Test case boolean bsection D8 has been modified (removed TODO statement);
- Test case boolean bsection A3 has been modified (as the shapes have been changed).
- Added correction of the tolerance values of the shapes according to the bug 0023610.
- test cases:
boolean bcommon_complex C3,
boolean bcut_complex F2 O7,
boolean bfuse_complex C4 C5 E4,
boolean bsection B6 M8 M9 N4 N5 N7,
boolean bfuse_simple ZP6,
draft angle G8,
feat featprism S2
have been marked as invalid according to the bug 0022033;
- New value of result has been set in the test cases :
boolean bopsection D4
boolean bsection R8
as it is correct.
- test case bugs modalg bug23472 has been rewritten according to the new format of bsection command.
- The classes IntTools_Context and IntTools_ShrunkRange have been replaced by BOPInt_Context and BOPInt_ShrunkRange accordingly.
- The new class BRepAlgoAPI_Check has been added according to the bug 0023648.
- Some regressions have been fixed.
- The following test cases have been marked as invalid or rewritten
bugs modalg buc60462_2, 60531_2, 60776_1, bug472_1, bug472_2, bug472_3, bug497_3, bug62
bugs moddata bug26_1, bug26_2,
- The test case bugs modalg buc60533 has been rewritten to use the general fuse algorithm for building the result.
- The new value of the result has been set in the test case bugs modalg 60776_2.
- The following test cases have been rewritten according to the new format of the bsection command
bugs modlag fra62369, pro18892
bugs moddata bug75_1, bug75_2
- Corrected BRepAlgoAPI_Check.
- Removed package BOPTColStd.
- Rewritten test cases caf named_shape F8 F9.
- Removed unnecessary comments.
- Corrected the following test scripts :
boolean bcut_complex(012) O3 O4 O5 O6 O8
boolean bfuse_complex(013) O5 O6 P8
boolean bopcommon_complex(021) D8 D9
boolean bopfuse_complex(022) H1 J6
boolean boptuc_complex(024) D5
bugs modalg(006) bug399 bug497_1
feat featprism(003) C4
- Corrections in the treatment of section edges (putting paves on the curves);
- Corrections in BRepOffset_Tool;
- The following test cases have been rewritten according to the new format of the bsection command
bugs modalg bug6502, bug6554, bug6766_1, bug6766_3
- The new value of the result has been set in the following test cases
bugs modalg bug1255, bug1255_1
- The following test cases have been marked as invalid or rewritten
bugs modalg bug472_2, bug472_3, bug825_2
bugs moddata bug10603, bug152_1, bug152_2, bug3721_1, bug3721_2, bug3721_3
- The following test cases have been rewritten as improvements
bugs modalg bug693, bug693_1, bug817_1
bugs moddata bug3721_5, bug3721_6, bug6862_3, bug6862_4, bug6862_6
- Test cases bugs modlag buc60787_1, buc60787_2, buc60788_2, buc60788_3 have been corrected.
- Fixed some SALOME regressions (modifications in the treatment of the section edges);
- Fixed test case bugs modalg bug23100;
- Test cases bugs modalg bug21754, bug22990 have been corrected according to the new format of the bsection command.
- Test cases bugs modalg bug13116_*, bug23711 have been fixed;
- Test cases bugs modalg bug697_2, bug697_4, bug697_7, bug697_8 have been marked as invalid according to the issue 0022033;
- Test cases bugs modalg bug22109_2, bug22109_3 have been corrected;
- Test case bugs modalg bug18186 has been corrected as it is improvement;
- Test case bugs modalg bug22802 has been deleted as there is no package BOPTColStd.
Modified class :IntTools_FaceFace
- method: void IntTools_FaceFace::ComputeTolReached3d()
The goal is:
to give more precise definition to the value of tolerance of intersection curves in 3D for the case plane/sphere.
Added test case boolean/bopcommon_complex/M7
Added test case boolean/bopcommon_simple/ZP9 for verified bug CR23374
