Macro NO_CXX_EXCEPTION was removed from code.
Method Raise() was replaced by explicit throw statement.
Method Standard_Failure::Caught() was replaced by normal C++mechanism of exception transfer.
Method Standard_Failure::Caught() is deprecated now.
Eliminated empty constructors.
Updated samples.
Eliminate empty method ChangeValue from NCollection_Map class.
Removed not operable methods from NCollection classes.
Added DRAW command dsetsignal, resetting OSD signal handler with either armed or disabled FPE handler, according to an option.
If called without arguments, it sets FPE handler only if environment variable OSD_FPE is defined (with value different from 0).
On start, DRAW calls dsetsignal to set FPE signal if CSF_FPE is defined.
Test bugs fclasses bug6143 uses dsetsignal to set FPE handler unconditionally before the test command, and resets it to default at the end.
A number of changes in the code have been done in order to fix floating point exceptions that became generated after enabling signals:
- Global functions Sinh() and Cosh() defined in Standard_Real.hxx are improved to raise Standard_NumericError exception if argument is too big (greater than 710.47586), instead of relying on system treatment of floating point overflow. These functions are used instead of sinh and cosh in ElCLib.cxx.
- Maximal value of parameter on hyperbola is restricted by 23 (corresponding to ~1e10 in 3d) in order to avoid FP overflow in Extrema_GenExtCS.cxx, ShapeFix_EdgeProjAux.cxx.
- Interface of the root curve adaptor class Adaptor3d_Curve has been updated to add new virtual methods BasisCurve and OffsetValue. They complement the adaptor for the case of offset curves. These methods are used in Extrema_GenExtCS.cxx to restrict domain search in the case of offset of hyperbola, in order to get rid of floating point overflow. All classes inheriting Adaptor3d_Curve have been changed to implement the new virtual methods.
- Protection against division by zero has been implemented in ApproxInt_KnotTools.cxx, BRepClass3d_SClassifier.cxx, BRepGProp_Face.cxx, BRepMesh_FastDiscretFace.cxx, Geom2dGcc_Circ2d2TanOnIter.cxx, Geom2dInt_Geom2dCurveTool.cxx, IntPolyh_MaillageAffinage.cxx.
- Protection against calling of math functions of infinite arguments has been added in BRepCheck_Edge.cxx, BRepLib.cxx, CSLib_NormalPolyDef.cxx, Extrema_FuncExtPC.gxx, Extrema_GExtPC.gxx, Extrema_GLocateExtPC.gxx, Intf_InterferencePolygonPolyhedron.gxx, ShapeAnalysis_Surface.cxx, ShapeAnalysis_TransferParametersProj.cxx, ShapeAnalysis_Wire.cxx, math_FunctionSetRoot.cxx.
- Proper initialization of local variables is done in BOPAlgo_PaveFiller_6.cxx, XSDRAWSTLVRML.cxx.
- Inconsistent usage of Standard_Boolean* to access integer data in HLR (caused by #27772) is corrected
Some test cases have been updated to actual state.
Code has been updated to remove no-op casts and implicit casts to Standard_Boolean.
Places of inproper use of Standard_Boolean instead of Standard_Integer
have been corrected:
- Bnd_Box, Bnd_Box2d
Bit flags are now defined as private enum
- HLRAlgo_BiPoint, HLRAlgo_EdgesBlock, HLRBRep_EdgeData, HLRBRep_FaceData
Bit flags are now defined as enum
- HLRAlgo_EdgeStatus, HLRBRep_BiPnt2D, HLRBRep_BiPoint
Bit flags are now defined as bool fields
- HLRAlgo_PolyData
Bit flags are now defined as Standard_Integer
- OSD_DirectoryIterator, OSD_FileIterator
Boolean flag is now defined as Standard_Boolean
- ShapeAnalysis_Surface::SurfaceNewton()
now returns Standard_Integer (values 0, 1 or 3)
- ChFi2d_FilletAlgo
now uses TColStd_SequenceOfBoolean instead of TColStd_SequenceOfInteger
for storing boolean flags
Method IFSelect_Dispatch::PacketsCount() has been dropped from interface.
ShapeFix_Solid::Status() has been fixed to decode requested status
instead of returning integer value.
TopOpeBRepBuild_Builder1 now defines map storing Standard_Boolean values
instead of Standard_Integer.
Persistence for Standard_Boolean type has been corrected
to keep backward compatibility:
- BinMDataStd, BinTools, FSD_BinaryFile
Broken Draw Harness commands vdisplaymode and verasemode have been removed.
BRepMesh_FastDiscretFace::initDataStructure() - workaround old gcc limitations
BRepMesh_IncrementalMesh::clear() - avoid ambiguity
1) BRepMesh_FastDiscretFace.cxx:
- exclude planes from procedure of inserting internal points.
- localize declaration of the container aNewVertices in each method where it is needed.
- correct the logic of the method insertInternalVerticesOther, so that to separate the processes of removing extra points and addition of new points in different cycles, thus making the code more clear and in addition stable.
- insert useful output of intermediate mesh to a file in control() method for debug purposes (with definition DEBUG_MESH).
2) Add global functions MeshTest_DrawTriangles and MeshTest_DrawLinks to draw mesh data in debug session.
3) BRepMesh_FastDiscret:
- in the method Add calculations of deflections have been simplified for non-relative mode.
- replace the attribute MinDist with Deflection in EdgeAttributes structure. Correct its computation so that later to store this value as deflection of the polygon.
4) Make protection against exception in the method BRepMesh_Delaun::addTriangle() when an added triangle creates a third connection of a mesh edge.
5) BRepMesh_EdgeTessellator.cxx, BRepMesh_EdgeTessellationExtractor.cxx: use Geom2dAdaptor_Curve in order to use b-spline cache while computing value on a curve.
6) In BndLib_Box2dCurve::PerformBSpline, avoid creating new b-spline in case of requested parameter range differ from natural bounds insignificantly.
7) In GeomAdaptor classes, postpone building of cache till the time of its actual usage. So, creation of an adapter to compute intervals of continuity does not lead to creation of internal cache.
8) In the methods BRepAdaptor_Curve::Bezier and BSpline do not call Transformed() if transformation is identity.
9) In the classes Geom_BSplineCurve, Geom_BSplineSurface, Geom_BezierCurve, Geom_BezierSurface, Geom2d_BSplineCurve, Geom2d_BezierCurve change the method Pole() to return the point by const reference.
10) In CPnts_AbscissaPoint.cxx, compute derivative by D1 instead of DN to make use of b-spline cache.
11) Change test cases to actual state:
- Number of triangles/nodes can grow due to more accurate work with deflection of edges. Now the edge is tessellated using its own tolerance instead of maximal tolerance of all shapes in the face.
- Accept new numbers of mesh errors (free links, free nodes) for really bad shapes.
- Correct the test "bugs/mesh/bug25612" to produce stable result.
- Disable redundant checks in test cases bug25378* (lower limit for computation time).
- Speed up iso-lines computation for offset of bspline surfaces. For that use adaptor instead of original surface in evaluator of approximation.
- Add output of polylines for debug of insertInternalVerticesOther().
Reference data in test case bugs\moddata_2\bug453_3 have been changed to be close to expected theoretical values. This makes the test give stable result on different platforms.
1) Reduce the number of calls to malloc by grouping requests to larger blocks. To achieve this goal, the following ways are used:
- Containers of types sequence, list and map are initialized with an instance of NCollection_IncAllocator, at this taking care of the time of life of allocated objects, so that not to occupy huge amount of memory.
- Allocation of several arrays having the same and short life time is changed so that to allocate a buffer array of necessary size and to place arrays in this buffer.
2) In BRepMesh_FastDiscretFace, optimize the function filterParameters so that to avoid excess memory allocations.
3) In NCollection_CellFilter, change declaration of the method Reset to accept array by reference rather than by value.
4) Add Allocator() method in map, sequence and vector collection classes by analogy with list collection.
5) Correct the size of block for IncAllocator for x64 platform. In order free-ed block to be returned to the system its size should be at least 1024K on x64 and 512K on x86. This allows to retain free virtual space almost to the state before algorithm run.
6) Decrease amount of memory zeroed by calloc. For that, reduce theIncrement parameter of the embedded vectors of the classes NCollection_UBTreeFiller and BRepMesh_VertexInspector to default value 256.
7) Avoid computing bounding box when not necessary (if no relative deflection is used)
8) Cycles by wires of face using TopExp_Explorer are converted to use TopoDS_Iterator instead.
9) BRepMesh_FastDiscret::Add optimized to avoid storing sequences of faces and edges
10) The tests "mesh standard_* W7" are corrected to accept the new behavior. Earlier the following error took place:
Not connected mesh inside face 9
{12 13}
Now this error was replaced with another one:
free nodes (in pairs: face / node):
{9 12}
Actually it is not a regression, rather improvement, if we look at the snapshot.
11) Change other test cases to their actual state.
Do not insert internal nodes for Cylinder in case if it is less than DefFace value or in case of long cylinder with small radius due to protection against overflow during casting to integer.
Small correction of shape name in test case for issue CR27442
Check deviation of normals at vertices of triangles for complex surface types different from Bezier and BSpline.
Modified test cased according to changes in BRepMesh.
Do not remove more intermediate parameters than N - 3 in order to have at least one parameter related to surface internals.
Check angle for angular deflection before removement of intermediate parameters.
Unify computation of internal vertices for complex surfaces.
Discretization points of edges are taken into account during computation of step of mesh grid.
Remove parameters only if they fit the constrains along the whole surface.
Do not add random internal parameters in case if their number is just 2.
Force freezing parameters both for U and V in case of significant control point.
Modified test cases
Warnings elimination in vc14.
BRepMesh_CircleTool: extend radius of circle by quite small value in order to classify points forming inscribed triangle as lying on it. Do not use PConfusion due to false positive result leading algorithm to hanging.
Small correction in test cases bugs/mesh/bug27119
Update of test cases according to the new behavior:
bugs/moddata_1/bug22759
mesh/data/standard/M4
Useless semicolons are removed after closing braces of namespaces and macros in code dependent on FreeImage and VTK.
Comments added at the closing braces of namespaces to help comprehension.
In OSD_File.cxx and OSD_Disk.cxx, unnecessary declarations of system functions are removed
Parameter for adaptive computation of minimal 2D meshing precision added in BRepMesh_IncrementalMesh API.
Corresponding option -adaptive added in DRAW command
All meshing parameters are collected in structure, BRepMesh_FastDiscret::Parameters, which is now used to define and manipulate parameters of the algorithm.
1) Macro definition WNT replaced by _WIN32 and _MSC_VER for platform and compiler detection accordingly.
2) Macro definition LIN replaced by __linux__ macro.
3) Macro definition DEB replaced by OCCT_DEBUG macro.
Made the BRepAdaptor_Curve a member of BRepMesh_EdgeParameterProvider to ensure that it is created before and destroyed after the Extrema_LocateExtPC that uses it.
Correction of new vertices insertion: remove all triangles shot by point even if they contain frontier edges in order to prevent cases of free edge glued with frontier;
findNextPolygonLink: choose link with opposite direction to previous one as the last resort in case if the is no another option;
Enlarge bounding boxes by Precision::PConfusion() in order to not to miss possible intersections;
Test-case for issue #26407
Return NoIntersection in case of end point touch and isConsiderEndPointTouch flag is not set
Update of test-cases according to the new behavior
All CMake meta-projects for OCCT are put to OCCT code (including fragments previously generated by WOK).
"/bigobj" compiler flag added to TKQADraw because of the size of its object file
[GeomToStep & Graphic3d] private headers are included from current dir of including source file
Automatic upgrade of OCCT code by command "occt_upgrade . -nocdl":
- WOK-generated header files from inc and sources from drv are moved to src
- CDL files removed
- All packages are converted to nocdlpack
Missing headers added; includes of headers "Handle_...hxx" removed.
Misuses of macro Handle() and its use in typedefs corrected.
Alias classes Profile and Option are removed from IFSelect; ones defined in MoniTool are used directly.
Removed header files defining only Handle classes (except Image_PixMap_Handle.hxx)
Classes SelectMgr_BaseFrustum and now inherit Standard_Transient and can be manipulated by Handle (not NCollection_Handle)
Fixed reference-type local variable pointing to temporary object
Use of handle in conditional expressions and comparisons to NULL are replaced by call to method IsNull()
Package SortTools and its derived classes are removed; STL sort algorithms are used instead.
Comparator objects are mostly reimplemented as local classes.
Forward declaration of TCollection instances as classes are replaced by inclusion of corresponding header.
Cyclic dependencies between declaration of collection class and its item are resolved by forward declaring a class in collection header.
Calculate radius of circumcircle as maximum difference between its center and vertices or reference triangle.
Draw test command OCC25547 has been implemented.
Small optimizations for speed.
Update of test-cases according to the new behaviour
Update of test-cases in group mesh
Simple primitives to parallelize loops type "for" and "foreach" were implemented. The primitives encapsulates complete logic for creating and managing parallel context of loops. Moreover the primitives may be a wrapper for some primitives from 3rd-party library - TBB.
To use it is necessary to implement TBB like interface which is based on functors. For example:
Class Functor
{
public:
void operator() ([proccesing instance]) const
{
//...
}
};
In the body of the operator () should be implemented thread-safe logic of computations that can be performed in parallel context. If parallelized loop iterates on the collections with direct access by index (such as Vector, Array), it is more efficient to use the primitive ParallelFor (because it has no critical section).
All parts of OCC code which are using tbb were changed on new primitives.
0024826: Wrapping of parallelisation algorithms
Small fix.
The constructors of classes from following files have been fixed to ensure that all non-static fields are initialized:
Adaptor2d_Line2d.cxx
Adaptor3d_IsoCurve.cxx
Adaptor3d_OffsetCurve.cxx
AdvApp2Var_ApproxAFunc2Var.cxx
AIS_Dimension.cxx
AIS_InteractiveContext.cxx
Aspect_DisplayConnection.cxx
BiTgte_CurveOnEdge.cxx
BiTgte_CurveOnVertex.cxx
BRepAdaptor_CompCurve.cxx
BRepMesh_Circle.hxx
BRepMesh_Delaun.cxx
BRepToIGES_BREntity.cxx
ChFi2d_AnaFilletAlgo.cxx
ChFi2d_ChamferAPI.cxx
ChFi2d_FilletAlgo.cxx
ChFi2d_FilletAlgo.hxx
Extrema_ExtPExtS.cxx
Font_FTFont.cxx
GccEnt_QualifiedCirc.cxx
Geom2dAdaptor_Curve.cxx
IGESData_IGESEntity.cxx
IGESData_DefSwitch.cxx
IGESToBRep_CurveAndSurface.cxx
LDOM_XmlReader.cxx
math_TrigonometricFunctionRoots.cxx
NCollection_ListNode.hxx
ProjLib_CompProjectedCurve.cxx
ProjLib_ComputeApproxOnPolarSurface.cxx
Select3D_Box2d.hxx
Select3D_PointData.hxx
New parameter MinSize has been introduced to BRepMesh and GCPnts_TangentialDeflection;
Check length of remaining part of curve for min size parameter instead of distance between two points to avoid large gaps in case highly distorted BSpline surfaces;
Produce fine mesh for sphere and fix other surface;
Test cases for issue CR25378
Correction of test cases for issue CR25378
