1. class BOPDS_Iterator
method:
void BOPDS_Iterator::Intersect()
The ttreatment of solid/* interferences has been added.
2 class BOPAlgo_PaveFiller
protected methods:
void BOPAlgo_PaveFiller::PerformVZ()
void BOPAlgo_PaveFiller::PerformEZ()
void BOPAlgo_PaveFiller::PerformFZ()
void BOPAlgo_PaveFiller::PerformZZ()
has been added.
The methods are to Compute
Vertex/Solid
Edge/Solid
Face/Solid
Solid/Solid
interferences.
3. class BOPAlgo_PaveFiller
protected method:
void BOPAlgo_PaveFiller::PerformFF()
Empty interferences has not been added in the interferences' table
4. class BOPAlgo_CheckerSI
protected methods:
void BOPAlgo_CheckerSI::PerformVZ()
void BOPAlgo_CheckerSI:PerformEZ()
void BOPAlgo_CheckerSI::PerformFZ()
void BOPAlgo_CheckerSI::PerformZZ()
has been removed.
5. class BOPAlgo_BOP
protected method:
void BOPAlgo_BOP::BuildRC()
void BOPAlgo_BOP::BuildSolid()
changed to treat non-interferred solids and keep it in the result as they were
Test case for issue #25242
Changes:
class BOPTools_AlgoTools3D
method:
void BOPTools_AlgoTools3D::DoSplitSEAMOnFace
(const TopoDS_Edge& aSplit,
const TopoDS_Face& aF)
The treatment of seam edges for the periodic surfaces has been changed.
Test case for issue CR25228
Existing method of Cylinder-Cylinder intersection computing is based on finding the analytic line (as a function of one argument) and converting one into the walking-line with set of equidistant (along the line parameter) points.
The main advantage of applied method is using adaptively computed step. Necessary step is computed into every point of the obtained walking-line. At that we receive final walking-line directly (without preliminary analytic line) and we determine moments more precisely, when it should be split (see IntPatch_ImpImpIntersection_4.gxx).
The main disadvantages is bad working this method for non-trimmed cylinders (with infinite bounds), because step value is depend on the boundaries values.
More over, new method always returns walking-line, while intersection result can be an analytic curve (lines, circle, ellipse). That is NO good. Therefore, analytic curve is computed by existing method.
In conclusion, in spite of covering almost all more often meeting cases, new method has limited application. Then we should use the existing old method.
Additionally, method MinMax() is added (see Standard_Real.hxx file). It uses into new algorithm.
Some test cases is changed according to their new behavior.
Test case for issue CR24915 is added.
Into GeometryTest_APICommands.cxx only tabulations were chaged.
"Extending" of isolines (see Geom2dHatch_Hatcher.cxx).
Small correction of test case for issue CR24915.
Since there is a possibility to run the check on self-intersection (BOPAlgo_CheckerSI algorithm) in non-destructive mode (source shape will not be modified)
there is no need to make copies of the arguments of BRepAlgoAPI_Check.
Test case added
Changes:
class BOPAlgo_WireSplitter
static function:
Standard_Boolean RefineAngle2D(const TopoDS_Vertex& aV,
const TopoDS_Edge& aE,
const TopoDS_Face& myFace,
const Standard_Real aA1,
const Standard_Real aA2,
Standard_Real& aA)
The contents of Domain 2D for the straight line has been changed.
class BOPTools_AlgoTools2D
method:
void BOPTools_AlgoTools2D::AdjustPCurveOnFace
(const TopoDS_Face& aF,
const Standard_Real aFirst,
const Standard_Real aLast,
const Handle(Geom2d_Curve)& aC2D,
Handle(Geom2d_Curve)& aC2DA)
The treatment of cylindrical surfaces has been changed taking into account
existing values of tolerances of the edges.
Test cases for issue CR25163
class BOPTools_AlgoTools
method
Standard_Boolean BOPTools_AlgoTools::IsSplitToReverse
(const TopoDS_Face& theFSp,
const TopoDS_Face& theFSr,
Handle(IntTools_Context)& theContext)
Reverse normal direction for REVERSED faces.
Test case for issue CR25127
class IntTools_FaceFace
method
static Standard_Boolean DecompositionOfWLine(const Handle(IntPatch_WLine)& theWLine,
const Handle(GeomAdaptor_HSurface)& theSurface1,
const Handle(GeomAdaptor_HSurface)& theSurface2,
const TopoDS_Face& theFace1,
const TopoDS_Face& theFace2,
const IntTools_LineConstructor& theLConstructor,
const Standard_Boolean theAvoidLConstructor,
IntPatch_SequenceOfLine& theNewLines,
Standard_Real& theReachedTol3d,
const Handle(IntTools_Context)& aContext)
Correct treatment of WLines with only one point before or after the boundary point.
Test case for issue CR25002
class IntTools_FaceFace
method
void IntTools_FaceFace::Perform(const TopoDS_Face& aF1,
const TopoDS_Face& aF2)
Change the approximation flags according to the order of faces.
Test case for issue CR25019
class IntTools_Tools
method
Standard_Boolean IntTools_Tools::AdjustPeriodic
(const Standard_Real thePar,
const Standard_Real theParMin,
const Standard_Real theParMax,
const Standard_Real thePeriod,
Standard_Real &theNewPar,
Standard_Real &theOffset,
const Standard_Real theEps)
The new function has been implemented for fast adjustment of pcurves to the range of surface.
Test case correction for issue CR24981
Modification:
class IntTools_EdgeEdge
For correct computation of resolution for curves of type Hyperbola and Parabola two new static functions have been implemented:
static
Standard_Real ResolutionCoeff(const BRepAdaptor_Curve& theBAC,
const IntTools_Range& theRange);
static
Standard_Real Resolution(const Handle(Geom_Curve)& theCurve,
const GeomAbs_CurveType theCurveType,
const Standard_Real theResCoeff,
const Standard_Real theR3D);
bugs moddata_2 bug26_2 - improvement.
Test case for issue CR24939
Test case correction for issue CR24939
class: BOPTools_AlgoTools2D
method:
void BOPTools_AlgoTools2D::MakePCurveOnFace
(const TopoDS_Face& aF,
const Handle(Geom_Curve)& aC3D,
const Standard_Real aFirst,
const Standard_Real aLast,
Handle(Geom2d_Curve)& aC2D,
Standard_Real& TolReached2d)
has been modified to provide the conformity with the location of the surface
Test case for issue CR24973
1. DRAW-command for testing was created (see QABugs_19.cxx)
2. Alignments were changed in other files.
Main Changes are into IntCurve_IntConicConic_1.cxx file (variable isOutOfRange was added).
If found intersection point is out of range, minimal distance between corresponding ends of interval is taken. If this distance is less than tolerance, this point replaces found intersection point. Otherwise, found intersection point is ignored.
Modified QA command OCC24889 and added test case bugs/modalg_5/bug24889
The reason for the exception was that given compound contains only edges with INTERNAL orientation (there are not any wires or faces). Consequently, given shape is non-manifold a priory.
New fix handles some cases.
Added test case bugs/modalg_5/bug24807
Modification:
class BOPAlgo_PaveFiller
method BOPAlgo_PaveFiller::PutBoundPaveOnCurve().
Create bounding paves for each section curve separately.
Added test case bugs/modalg_5/bug24950
Modifications:
1. class BOPAlgo_WireSplitter
1.1. Removed static method RecomputeAngles(...).
1.2. Minor corrections.
2. class BOPTools_AlgoTools
2.1 method GetFaceOff
For definition of an angles between faces the same step in 3D space has been used for all faces in the list.
To define that step new static function MinStep3D has been implemented.
Added test case bugs/modalg_5/bug24879
Deleted unnecessary TODOs in test case bugs/modalg_2/bug497_3
Range of changing of some analytic curves is computed by other methods. It allows computing face's boundaries with more precise.
Tolerance was increased to provide successful work of some algorithms.
Functions BRepOffsetAPI_MiddlePath::Build() and ApproxWithPCurves(...) (file IntTools_FaceFace.cxx) were changed according to new result of algorithm's work.
It is possibly for "outboundaried faces" (see bug#23675) to compute incorrect UV-Bounds, when first parameter is more than last. To avoid it, extended control of computed bounds was added.
Function for fail sameparameter fixing was added to HLRAppli_ReflectLines to avoid creation bad shapes after algorithm's work.
In file ShapeFix_ComposeShell.cxx only text formatting was changed.
Some test cases are changed according to their new behavior.
Added test case bugs/moddata_3/bug23511
class BOPAlgo_CheckerSI
- methods:
void BOPAlgo_CheckerSI::Perform()
class BOPAlgo_ArgumentAnalyzer
- methods:
void BOPAlgo_ArgumentAnalyzer::TestSelfInterferences()
The changes have been done to provide the consistence
between results in SALOME Application and DRAW Application
The sytax of the command "bopcheck" has been changed:
bopcheck Shape [level of check: 0 - 9] [-t -s]
The options:
-t - display elapsed CPU time
-s - run in serial (non-parallel) mode. The default mode is parallel.
Modified test cases bugs/modalg_5/bug24029 and bugs/modalg_5/bug24764 according to changed output format of the "bopcheck" command.
Sorting by intersection of bounding boxes of faces with line or box built for curve was added.
Recursive call method Find() was replaced on sequential call.
Added method Init to initialize algorithm by separate curve for intersection of shape by multiple curves.
Added possibility to intersect shape by multiple curves in DRAW command.
Added test case bugs/modalg_5/bug24899
