1) BRepMesh_FastDiscretFace.cxx:
- exclude planes from procedure of inserting internal points.
- localize declaration of the container aNewVertices in each method where it is needed.
- correct the logic of the method insertInternalVerticesOther, so that to separate the processes of removing extra points and addition of new points in different cycles, thus making the code more clear and in addition stable.
- insert useful output of intermediate mesh to a file in control() method for debug purposes (with definition DEBUG_MESH).
2) Add global functions MeshTest_DrawTriangles and MeshTest_DrawLinks to draw mesh data in debug session.
3) BRepMesh_FastDiscret:
- in the method Add calculations of deflections have been simplified for non-relative mode.
- replace the attribute MinDist with Deflection in EdgeAttributes structure. Correct its computation so that later to store this value as deflection of the polygon.
4) Make protection against exception in the method BRepMesh_Delaun::addTriangle() when an added triangle creates a third connection of a mesh edge.
5) BRepMesh_EdgeTessellator.cxx, BRepMesh_EdgeTessellationExtractor.cxx: use Geom2dAdaptor_Curve in order to use b-spline cache while computing value on a curve.
6) In BndLib_Box2dCurve::PerformBSpline, avoid creating new b-spline in case of requested parameter range differ from natural bounds insignificantly.
7) In GeomAdaptor classes, postpone building of cache till the time of its actual usage. So, creation of an adapter to compute intervals of continuity does not lead to creation of internal cache.
8) In the methods BRepAdaptor_Curve::Bezier and BSpline do not call Transformed() if transformation is identity.
9) In the classes Geom_BSplineCurve, Geom_BSplineSurface, Geom_BezierCurve, Geom_BezierSurface, Geom2d_BSplineCurve, Geom2d_BezierCurve change the method Pole() to return the point by const reference.
10) In CPnts_AbscissaPoint.cxx, compute derivative by D1 instead of DN to make use of b-spline cache.
11) Change test cases to actual state:
- Number of triangles/nodes can grow due to more accurate work with deflection of edges. Now the edge is tessellated using its own tolerance instead of maximal tolerance of all shapes in the face.
- Accept new numbers of mesh errors (free links, free nodes) for really bad shapes.
- Correct the test "bugs/mesh/bug25612" to produce stable result.
- Disable redundant checks in test cases bug25378* (lower limit for computation time).
- Speed up iso-lines computation for offset of bspline surfaces. For that use adaptor instead of original surface in evaluator of approximation.
- Add output of polylines for debug of insertInternalVerticesOther().
Reference data in test case bugs\moddata_2\bug453_3 have been changed to be close to expected theoretical values. This makes the test give stable result on different platforms.
- Added function checkprops, set default tolerance parameter to 1.0e-4
- Using "area" instead of "square".
- Options "-equal\notequal" isn't used together with "-s" in blend and offset test cases.
- Correct regressions/differences/improvements and CPU problem (set props tolerance to 0.1)
- Corrected test cases to use checkprops proc.
- Correct image difference
- Updated TODOs in test cases.
- Updated test cases to get correct images of result shape
This branch contains fixes for 26675 and 26431 bugs.
1. Normalization has been eliminated.
2. Interfaces of AppDef_Compute::Parametrization(...) and BRepAlgo_BooleanOperations::SetApproxParameters() methods have been changed.
3. Overloaded methods for ApproxInt_Approx::SetParameters(...), TopOpeBRepTool_GeomTool::GetTolerances(...) and TopOpeBRepTool_GeomTool::SetTolerances(...) have been removed (because some fields of these classes are not used more).
4. Comments for some methods have been changed in BRepApprox_TheMultiLineOfApprox.hxx and GeomInt_TheMultiLineOfWLApprox.hxx files.
5. Some fields have been deleted from ApproxInt_MultiLine class. Kept members have become constant.
6. Interface of ksection DRAW-command has been changed.
7. Now, 2dintersect DRAW-command prints information about found segments.
8. Some code fragments have been rewritten to make them easier.
9. Algorithm of splitting WLine, which goes through pole of sphere has been improved.
10. Improve approximation algorithm in order to it will compute correct 2D- and 3D-tangent at the end of bezier constraints (including case when curve goes through or finishes on singular points).
11. Interface of IntPatch_WLine::Dump(...) method has been corrected.
12. Some methods for working with Walking-line are made more universal (available for both GeomInt and IntTools packages).
13. Problem in BRepLib::SameParameter(...) method has been fixed (see corresponding comment).
14. Small correction in Draft package.
15. Any outputs in IntPatch_Intersection::Dump(...) method have become disabled because they are useless. If anybody need in this outputs he/she will correct this method himself/herself.
Adjusting some test cases according to their new behavior.
Creation of new test cases.
----------------------------------------------------------------------------------------------------------------------------
Some explanation of new behavior of some test cases:
1. Regressions:
a) blend simple X4
The problem is described in the issue #0026740. According to this description, the result on the current MASTER seems to be wrong indeed.
b) boolean bcommon_complex C7 and boolean bcut_complex Q1
These test case use same shapes with different Boolean operation (COMMON and CUT). They are already BAD (on the MASTER). Now, some sub-shapes have become not-shared, simply. In my opinion, we shall apply new behavior of these tests.
c) boolean bsection M3
The problem described in the issue #0026777 exists even on the current MASTER.
d) boolean bsection M9
The problem is described in the message http://tracker.dev.opencascade.org/view.php?id=26815#c47546. Here, we have really regression in the picture.
e) boolean bsection N2
The problem is described in issue #0026814.
f) boolean volumemaker G1
The problem is described in issue #26020.
g) bugs modalg_1 bug1255 (and bug1255_1)
The problem is described in issue #26815.
h) bugs modalg_2 bug5805_18, bugs modalg_2 bug5805_42, bugs modalg_2 bug5805_46
The problem is described in issue #25925.
i) bugs modalg_3 bug602
The problem is describes in issue #602.
j) bugs modalg_5 bug24915
The problem is described in the message http://tracker.dev.opencascade.org/view.php?id=25929#c48565. It is not fixed by this issue.
k) bugs modalg_5 bug25838
The main reason is described in issue #0026816.
----------------------------------------------------------------------------
2. Improvements:
a) boolean volumemaker F9
b) bugs modalg_1 bug10160_3
c) bugs modalg_2 bug22557
d) bugs modalg_5 bug25319_1 (_2)
e) draft angle G2
f) offset shape A1
g) offset with_intersect_80 N7
