This branch contains fixes for 26675 and 26431 bugs.
1. Normalization has been eliminated.
2. Interfaces of AppDef_Compute::Parametrization(...) and BRepAlgo_BooleanOperations::SetApproxParameters() methods have been changed.
3. Overloaded methods for ApproxInt_Approx::SetParameters(...), TopOpeBRepTool_GeomTool::GetTolerances(...) and TopOpeBRepTool_GeomTool::SetTolerances(...) have been removed (because some fields of these classes are not used more).
4. Comments for some methods have been changed in BRepApprox_TheMultiLineOfApprox.hxx and GeomInt_TheMultiLineOfWLApprox.hxx files.
5. Some fields have been deleted from ApproxInt_MultiLine class. Kept members have become constant.
6. Interface of ksection DRAW-command has been changed.
7. Now, 2dintersect DRAW-command prints information about found segments.
8. Some code fragments have been rewritten to make them easier.
9. Algorithm of splitting WLine, which goes through pole of sphere has been improved.
10. Improve approximation algorithm in order to it will compute correct 2D- and 3D-tangent at the end of bezier constraints (including case when curve goes through or finishes on singular points).
11. Interface of IntPatch_WLine::Dump(...) method has been corrected.
12. Some methods for working with Walking-line are made more universal (available for both GeomInt and IntTools packages).
13. Problem in BRepLib::SameParameter(...) method has been fixed (see corresponding comment).
14. Small correction in Draft package.
15. Any outputs in IntPatch_Intersection::Dump(...) method have become disabled because they are useless. If anybody need in this outputs he/she will correct this method himself/herself.
Adjusting some test cases according to their new behavior.
Creation of new test cases.
----------------------------------------------------------------------------------------------------------------------------
Some explanation of new behavior of some test cases:
1. Regressions:
a) blend simple X4
The problem is described in the issue #0026740. According to this description, the result on the current MASTER seems to be wrong indeed.
b) boolean bcommon_complex C7 and boolean bcut_complex Q1
These test case use same shapes with different Boolean operation (COMMON and CUT). They are already BAD (on the MASTER). Now, some sub-shapes have become not-shared, simply. In my opinion, we shall apply new behavior of these tests.
c) boolean bsection M3
The problem described in the issue #0026777 exists even on the current MASTER.
d) boolean bsection M9
The problem is described in the message http://tracker.dev.opencascade.org/view.php?id=26815#c47546. Here, we have really regression in the picture.
e) boolean bsection N2
The problem is described in issue #0026814.
f) boolean volumemaker G1
The problem is described in issue #26020.
g) bugs modalg_1 bug1255 (and bug1255_1)
The problem is described in issue #26815.
h) bugs modalg_2 bug5805_18, bugs modalg_2 bug5805_42, bugs modalg_2 bug5805_46
The problem is described in issue #25925.
i) bugs modalg_3 bug602
The problem is describes in issue #602.
j) bugs modalg_5 bug24915
The problem is described in the message http://tracker.dev.opencascade.org/view.php?id=25929#c48565. It is not fixed by this issue.
k) bugs modalg_5 bug25838
The main reason is described in issue #0026816.
----------------------------------------------------------------------------
2. Improvements:
a) boolean volumemaker F9
b) bugs modalg_1 bug10160_3
c) bugs modalg_2 bug22557
d) bugs modalg_5 bug25319_1 (_2)
e) draft angle G2
f) offset shape A1
g) offset with_intersect_80 N7
Algorithm of computation of safe shift value along 2D-line (in order to distance between two points was less than tolerance) has been improved.
Correction of some test cases in accordance with their new behavior.
Test-case for issue #26642
Small correction of test-case
Small correction of test-case bugs heal bug26642
Method for preanalysis of input data added (CheckInputData).
Now it is possible to work with Error() function, which return error code.
Extended output support for all offset commands added.
Test-cases for issue #26556
I ComputePurgedWLine() function:
Excess points in walking line are deleted when:
1) Distance between neighboring points too small.
2) Points lie in one pipe without big jump on chord length.
III
Fixed problem with extremaPC with too close knot distribution to [minParam, maxParam] borders.
IV ApproxInt_Approx.gxx
New division criteria in intersection approximator.
III Test case
Test cases update to the new behavior.
Test case for CR21564
Correction of test cases for issue CR21564
class BOPAlgo_PaveFiller
method void BOPAlgo_PaveFiller::PutPaveOnCurve
(const Standard_Integer nV,
const Standard_Real aTolR3D,
BOPDS_Curve& aNC,
const BOPCol_MapOfInteger& aMI,
BOPCol_DataMapOfIntegerReal& aMVTol,
const Standard_Integer iCheckExtend)
Do not put the pave on the curve in case if there is already one with the same parameter.
Update tolerance of the existing vertex to reach the new one.
Added test case bugs/modalg_6/bug26444.
Test boolean/volumemaker/G1 is stable now (deleted TODOs), test offset/faces_type_i/C9 is bad (offset is done with wrong result).
Performance improvements and regression elimination.
Handling of degenerated case added.
Update of test-case offset faces_type_a A2 according to the new behavior
Test-case for issue #26418
1. B-spline cache was moved into separated classes: BSplCLib_Cache for 2D and 3D curves and BSplSLib_Cache for surfaces.
2. The cache is used now in corresponding adaptor classes (Geom2dAdaptor_Curve, GeomAdaptor_Curve and GeomAdaptor_Surface) when the curve or surface is a B-spline.
3. Algorithms were changed to use adaptors for B-spline calculations instead of curves or surfaces.
4. Precised calculation of derivatives of surface of revolution is implemented for the points of surface placed on the axis of revolution (Geom_SurfaceOfRevolution.cxx)
5. Small modifications are made to adjust algorithms to new behavior of B-spline calculation.
6. Test cases were modified according to the modern behavior.
7. Changes in BOPAlgo_WireSplitter, BOPTools_AlgoTools, BRepLib_CheckCurveOnSurface and ShapeAnalysis_Wire to use adaptors instead of geometric entities
8. Allow Geom2dAdaptor and GeomAdaptor in case of offset curve to use corresponding adaptor for basis curve
Modification of test-cases according to the new behavior.
Unstable test cases were reviewed
Modified test cases using checktrend command
Modified test cases for Linux platform
Modified test cases for Debug mode
Force stable work of the algorithm BRepAlgo_Loop by replacing DataMap collections with List and/or IndexedDataMap in order to provide iterations independent on the memory addresses.
Avoid uninitialized fields in default constructor of Extrema_POnSurf.
Mark bad tests as known bad.
Updated test-cases from branch CR24255_3
0024255: Regressions in test cases on OCCT vc9 win64 Release
Small refactoring.
Fix for CASE bugs modalg_5 bug25298_09: FAILED (error)
Test-cases correction (bugs modalg_5 bugs25804_1, bug25704_2)
Sometimes curve or surface, which is defined as C0, has continuity G1 or above. Offset can be built from these shapes.
Therefore, this extended checking was added into SetBasisCurve and SetBasisSurface methods.
Main changes in function BRepOffset_Tool::ExtentFace(...):
* "return" is added if intersection (in 2D-space) between two edges in a face cannot be found.
Basis curve/surface continuity value found (if G1-checking is OK) is set up as BasisContinuity (see myBasisCurveContinuity and myBasisSurfContinuity members which is returned by GetBasisCurveContinuity and GetBasisSurfContinuity() methods). This fact is used in Geom2dAdaptor and in GeomAdaptor classes.
Possibility is entered, which allows for basis elements of offset curve/surface to avoid of C0-checking.
Test cases were changed according to their new behavior.
Test-cases for issue #25124
Use NCollection_Map instead of instantiation of TCollection_Map
Test-cases for issue #25344
Correct error in test script: the shape variable assigned by the command 'restore' must not be referred by '$'.
1. DRAW-commands for curve/surface continuity returning were changed.
2. Output of "distmini" DRAW-command is amended.
3. Function MinMax() was moved from Standard_Real to IntPatch_ImpImpIntersection_4.gxx.
4. Incorrect computing of nbcurveC1 in Geom2dConvert::C0BSplineToC1BSplineCurve(...) function was liquidated.
Test cases were changed.
1. Method "SetValues()" for gp_Trsf2d class is added.
2. Method Orthogonalize for gp_Trsf2d and gp_Trsf classes was added.
3. Unused arguments from "SetValues()" method for gp_Trsf was deleted.
4. Output of AppParCurves_MultiPoint Dump was corrected.
5. Method of right projected point choosing was corrected in ProjLib package.
6. Some test cases were changed according to their new behavior.
Warning was fixed.
Remarks were applied.
- class VMap in Draw was removed
- NCollection_DataMap is used to store objects
- name of object is used to associate Tcl variable with the object
- creation and changing of objects are correclty handled
Redundant casts were removed.
Initial value is restored if variable is protected.
Tests for bug #24863 were added.
Some test cases and tcl command "save" were improved.
Useless using of upvar was removed.
1. Function QuasiFleche(...) does not call for small edges.
2. Forbid to work with NULL-shapes in OffsetWire::FixHoles(...) function.
3. ProjOnCurve(...) function in Bisector_BisecCC.cxx file returns status (DONE or NOT DONE).
Call to locate_data_file moved from catch statement in test scripts to ensure that missing data file is correctly reported as SKIPPED status of the test.
TODO statements with single word 'Exception' made bit more specific ("**" added).
Test bugs/caf/buc60846 removed as it is aimed to test inexistent component (Sketcher).
TODO removed in test bugs/fclasses/bug22611 -- the missing command must be added or test removed.
Test bugs/step/bug133_4 removed as duplicate of bugs/step/bug133_2.
Command vinit added in test bugs/vis/bug23226 to ensure that viewer is properly initialized before command vvbo, and relevant TODO statements removed.
Redundant FAILED patterns removed in parse.rules in groups perf and v3d as they break appropriate handling of missing data files.
Added QA command OCC22611 to improve test case bugs/fclasses/bug22611.
Modified test case buc60898 (shape was renamed) and moved to folder moddata_3 to avoid checkshape in end file.
Test case vis/bug23226 was modified using function checkcolor.
Modified TODO in some offset cases.
Deleted the same test cases bug697_* in /bugs/modalg
Deleted test cases which is based on v2d commands
Added test cases to folder bugs
