This branch contains fixes for 26675 and 26431 bugs.
1. Normalization has been eliminated.
2. Interfaces of AppDef_Compute::Parametrization(...) and BRepAlgo_BooleanOperations::SetApproxParameters() methods have been changed.
3. Overloaded methods for ApproxInt_Approx::SetParameters(...), TopOpeBRepTool_GeomTool::GetTolerances(...) and TopOpeBRepTool_GeomTool::SetTolerances(...) have been removed (because some fields of these classes are not used more).
4. Comments for some methods have been changed in BRepApprox_TheMultiLineOfApprox.hxx and GeomInt_TheMultiLineOfWLApprox.hxx files.
5. Some fields have been deleted from ApproxInt_MultiLine class. Kept members have become constant.
6. Interface of ksection DRAW-command has been changed.
7. Now, 2dintersect DRAW-command prints information about found segments.
8. Some code fragments have been rewritten to make them easier.
9. Algorithm of splitting WLine, which goes through pole of sphere has been improved.
10. Improve approximation algorithm in order to it will compute correct 2D- and 3D-tangent at the end of bezier constraints (including case when curve goes through or finishes on singular points).
11. Interface of IntPatch_WLine::Dump(...) method has been corrected.
12. Some methods for working with Walking-line are made more universal (available for both GeomInt and IntTools packages).
13. Problem in BRepLib::SameParameter(...) method has been fixed (see corresponding comment).
14. Small correction in Draft package.
15. Any outputs in IntPatch_Intersection::Dump(...) method have become disabled because they are useless. If anybody need in this outputs he/she will correct this method himself/herself.
Adjusting some test cases according to their new behavior.
Creation of new test cases.
----------------------------------------------------------------------------------------------------------------------------
Some explanation of new behavior of some test cases:
1. Regressions:
a) blend simple X4
The problem is described in the issue #0026740. According to this description, the result on the current MASTER seems to be wrong indeed.
b) boolean bcommon_complex C7 and boolean bcut_complex Q1
These test case use same shapes with different Boolean operation (COMMON and CUT). They are already BAD (on the MASTER). Now, some sub-shapes have become not-shared, simply. In my opinion, we shall apply new behavior of these tests.
c) boolean bsection M3
The problem described in the issue #0026777 exists even on the current MASTER.
d) boolean bsection M9
The problem is described in the message http://tracker.dev.opencascade.org/view.php?id=26815#c47546. Here, we have really regression in the picture.
e) boolean bsection N2
The problem is described in issue #0026814.
f) boolean volumemaker G1
The problem is described in issue #26020.
g) bugs modalg_1 bug1255 (and bug1255_1)
The problem is described in issue #26815.
h) bugs modalg_2 bug5805_18, bugs modalg_2 bug5805_42, bugs modalg_2 bug5805_46
The problem is described in issue #25925.
i) bugs modalg_3 bug602
The problem is describes in issue #602.
j) bugs modalg_5 bug24915
The problem is described in the message http://tracker.dev.opencascade.org/view.php?id=25929#c48565. It is not fixed by this issue.
k) bugs modalg_5 bug25838
The main reason is described in issue #0026816.
----------------------------------------------------------------------------
2. Improvements:
a) boolean volumemaker F9
b) bugs modalg_1 bug10160_3
c) bugs modalg_2 bug22557
d) bugs modalg_5 bug25319_1 (_2)
e) draft angle G2
f) offset shape A1
g) offset with_intersect_80 N7
Walking line method extraction into separate class IntTools_WLineTool.
New purging method of walking line had been added. Now point which are out of bounds are deleted.
Minor corrections.
Test case for issue CR26775
Changed the rules for the types of the arguments for different operations:
1. FUSE: All arguments and tools should have the same dimension;
2. CUT: The MAXIMAL dimension of the ARGUMENTS should be less
or equal to the MINIMAL dimension of the TOOLS;
3. CUT21: The MINIMAL dimension of ARGUMENTS should be grater
or equal to the MAXIMAL dimension of the TOOLS;
4. COMMON: The arguments and tools could have any dimensions.
For the arguments of collection type (WIRE, SHELL, COMPSOLID)
the type will be passed into the result of the operation.
The documentation should be updated according to new behavior.
Documentation has been updated.
Implemented suggestions by MSV and some grammar changes.
Test cases for issue CR26565
Correction of test cases for issue CR26565
Correction of test cases for issue CR26565
I ComputePurgedWLine() function:
Excess points in walking line are deleted when:
1) Distance between neighboring points too small.
2) Points lie in one pipe without big jump on chord length.
III
Fixed problem with extremaPC with too close knot distribution to [minParam, maxParam] borders.
IV ApproxInt_Approx.gxx
New division criteria in intersection approximator.
III Test case
Test cases update to the new behavior.
Test case for CR21564
Correction of test cases for issue CR21564
Test for sewing command were updated to check reference information.
Commands for testing were moved to the file src/DrawResources/CheckCommands.tcl
Documentation overview was updated.
Unstable test cases were reviewed
Modified test cases using checktrend command
Modified test cases for Linux platform
Modified test cases for Debug mode
Updated test-cases from branch CR24255_3
0024255: Regressions in test cases on OCCT vc9 win64 Release
Small refactoring.
Fix for CASE bugs modalg_5 bug25298_09: FAILED (error)
Test-cases correction (bugs modalg_5 bugs25804_1, bug25704_2)
1. Dump of WLine is shown with more precise.
2. Equation solving with more precise.
3. Dump of Multy-line.
4. Code optimization.
Some test cases were updated in accordance with their new behaviour.
Correction of test cases for issue CR25531
class IntTools_ShrunkRange
method void IntTools_ShrunkRange::Perform()
Fix to avoid creation of small section edges.
Correction of test case for issue CR23753
Range of changing of some analytic curves is computed by other methods. It allows computing face's boundaries with more precise.
Tolerance was increased to provide successful work of some algorithms.
Functions BRepOffsetAPI_MiddlePath::Build() and ApproxWithPCurves(...) (file IntTools_FaceFace.cxx) were changed according to new result of algorithm's work.
It is possibly for "outboundaried faces" (see bug#23675) to compute incorrect UV-Bounds, when first parameter is more than last. To avoid it, extended control of computed bounds was added.
Function for fail sameparameter fixing was added to HLRAppli_ReflectLines to avoid creation bad shapes after algorithm's work.
In file ShapeFix_ComposeShell.cxx only text formatting was changed.
Some test cases are changed according to their new behavior.
Added test case bugs/moddata_3/bug23511
class IntAna_QuadQuadGeo
The changes have been done to provide the treatment the cases
when the value of the angle between the planes is small and
the origin of intersection line should be refined.
class IntTools_FaceFace
The changes have been done to provide the treatment of faces
in cases when both are based on planar surfaces.
The UV-bounds have been extended to provide correct solutions
as it has been done for all other cases with plane-based faces.
Added test case bugs/modalg_5/bug24914
Modified length of result shape in test case bugs/modalg_1/bug10232
- bugs modalg_5 bug23954 - Added test case for issue 23954
- bugs modalg_1 bug60776_1 - Corrected square of shape and deleted appropriate TODO
- bugs moddata_1 bug13 - Added check for the curve length obtained as a result of intersection
- feat featprism S2 - Corrected square of shape and deleted appropriate TODO
1. Checking, if intersection curve is collapsed, is added. (file GeomInt_LineConstructor.cxx)
2. Earlier, intersection line was considered as valid if only mid-point of every interval of this line is into two intersected surfaces (with given tolerance). That's no good because after inserting of new points, old points, which is considered as valid only because they are into beginning or into end of interval (therefore, they was not checked), moved to mid of interval and became invalid. Therefore, checking for first and last points was added. (file GeomInt_LineConstructor.cxx)
3. Intersection line became valid (see bug description) after adding of new additional points into it (file IntPatch_PrmPrmIntersection.cxx). Methods for finding and adding of new points were added. (file IntWalk_PWalking_1.gxx)
Some test cases were changed.
Test cases for issue CR24472
Out of ChoixRef array boundaries.
Uninitialized variable in IntCurve_IntPolyPolyGen::findIntersect(...) function.
Handling of infinity numbers in sprops command is added.
test (CPU-limit)
Test case and new draw command for issue CR24137
Modified test case de/iges_1/G9 according to new data
Small correction of test cases for issue CR24137
Modifications 1
1. To avoid creation of micro edges in the class BOPAlgo_PaveFiller added two new functions ForceInterfVE and
ForceInterfVF which updates tolerance of Vertex to make it interfere with Edge and Face accordingly.
2. In the class BOPInt_Tools added new function IsInRange which checks whether two ranges cross each other.
3. In the class BOPTools_AlgoTools added new function IntersectCurves2d which intersects pcurves of the face
to check it on the self-interference.
4. In the function IntTools_BeanFaceIntersector::FastComputeExactIntersection() the check on the coincidence of the whole
edge with the face (BOPTools_AlgoTools::IsBlockInOnFace) replaced with the check on the coincidence of one intermediate point with that face.
5. Test cases bugs modalg_1 bug1255, bug1255_1 has been updated with more correct value of the result.
6. TODO statement has been removed from the test cases boolean bcut_complex B1,B3,B5,C2,C4,C6,C8 as they are correct.
Adding test case for issue CR23958
Modification 2
1. In class BOPAlgo_PaveFiller added new function CheckPlanes(nF1, nF2) that checks whether two planar faces have common or intersecting sub shapes.
If these two faces do not have such sub shapes there is no need to intersect them.
2. In the function BOPAlgo_PaveFiller::MakeBlocks() added block for reducing the tolerance values to the previous state for the vertices
that were put on the section curve (with increasing of its tolerance value) that was rejected by the algorithm.
Modification 3
Back to Extrema_ExtAlgo_Grad algorithm in extrema computations in Boolean Operations algorithm.
I. New features:
no New features.
II. Changes:
II.1. class : BOPAlgo_Builder
- method:
void BOPAlgo_Builder::FillIn3DParts(BOPCol_DataMapOfShapeListOfShape& ,
BOPCol_DataMapOfShapeShape& ,
const BOPCol_BaseAllocator& )
The algorithm of finding 3D-parts for solids has ben changed.
To improve the performance the unbalanced binary tree is used.
II.2. class : BOPTools_AlgoTools
- method:
Standard_Boolean BOPTools_AlgoTools::GetFaceOff
(const TopoDS_Edge&,
const TopoDS_Face&
BOPTools_ListOfCoupleOfShape& ,
TopoDS_Face&
Handle(BOPInt_Context& )
The data treatment for tangent cases has been changed
III. Modified entities:
packages:
BOPAlgo
BOPTools
Small corrections of test cases
Fix first subset of warnings (about 100)
- while(1) and similar constructs replaced by for(;;)
- some uninitialized variables corrected
Got rid of Warning C4189: local variable is initialised but not referenced
Corrected mistakes after getting rid of C4189 compiler warning
Corrected some mistakes that led to compiling errors
Fixed test case because of improvement message - removed unnecessary TODO.
Small fix: tabs have been replaced with whitespaces.
Added TODO for Windows platform
removed last TODO
Corrected mistakes, returned some #ifdef DEB code, fixed test case .
Restoring a few places which have been modified too much
Small grammar fix
Deleted unnecessary puts in bugs/end
In parallel mode, limit number of jobs in the queue to avoid slowdown occurring with long queues
Obsolete DRAW tools removed
Improvement of processing of test log:
- log is collected as list and not as string for better performance
- short table of test cases (TOC) is added in HTML log
- algorithm to combine test cases in one row in HTML log is improved to avoid long lines (group bugs)
Parse rules corrected to ignore irrelevant debug messages, and to correctly report tests 3rdparty export as skipped or BAD when Gl2Ps is missing or is built in incompatible mode on windows
Tests corrected to pass in Debug mode on Windows
Call to locate_data_file moved from catch statement in test scripts to ensure that missing data file is correctly reported as SKIPPED status of the test.
TODO statements with single word 'Exception' made bit more specific ("**" added).
Test bugs/caf/buc60846 removed as it is aimed to test inexistent component (Sketcher).
TODO removed in test bugs/fclasses/bug22611 -- the missing command must be added or test removed.
Test bugs/step/bug133_4 removed as duplicate of bugs/step/bug133_2.
Command vinit added in test bugs/vis/bug23226 to ensure that viewer is properly initialized before command vvbo, and relevant TODO statements removed.
Redundant FAILED patterns removed in parse.rules in groups perf and v3d as they break appropriate handling of missing data files.
Added QA command OCC22611 to improve test case bugs/fclasses/bug22611.
Modified test case buc60898 (shape was renamed) and moved to folder moddata_3 to avoid checkshape in end file.
Test case vis/bug23226 was modified using function checkcolor.
Modifications:
- BRepOffset/BRepOffset_Tool.cxx, Features and Fillets algorithms have been ported on new BO algorithm.
- Old BO algorithm, that was implemented in BOP, BooleanOperations and BOPTools packages, has - been deleted.
- Porting SALOME algorithms to new BOP algorithm.
- Fixing regressions. Rebased on current master.
- Corrections in post treatment of section edges;
- Corrections in the accordance with the bug 0023293;
- Small corrections in the bopcheck and bopargcheck commands.
- NCollection maps have been replaced by NCollection indexed maps to guarantee the constant order of sub-shapes in the result of boolean operation.
- Test case feat featprism M9 has been fixed.
- Test cases chl 902 E3 H3 have been fixed (corrections in the treatment of section edges).
- Test cases caf driver B6 B7, caf named_shape F6 F7 have been modified according to the new order of sub-shapes in the result of boolean operation.
- Test cases blend buildevol G1, blend simple K4, bcommon_complex C7, feat featprism L6 have been modified as they are improvements.
- Test case boolean bsection A3 has been modified according to the new syntax of the bsection command.
- Test cases boolean bfuse_complex J1 P9 have been fixed (the function IsInternalFace has been modified to use the function GetFaceOff);
- Test case chl 902 H3 has been fixed (changes in the treatment of section edges);
- Test case boolean bsection D8 has been modified (removed TODO statement);
- Test case boolean bsection A3 has been modified (as the shapes have been changed).
- Added correction of the tolerance values of the shapes according to the bug 0023610.
- test cases:
boolean bcommon_complex C3,
boolean bcut_complex F2 O7,
boolean bfuse_complex C4 C5 E4,
boolean bsection B6 M8 M9 N4 N5 N7,
boolean bfuse_simple ZP6,
draft angle G8,
feat featprism S2
have been marked as invalid according to the bug 0022033;
- New value of result has been set in the test cases :
boolean bopsection D4
boolean bsection R8
as it is correct.
- test case bugs modalg bug23472 has been rewritten according to the new format of bsection command.
- The classes IntTools_Context and IntTools_ShrunkRange have been replaced by BOPInt_Context and BOPInt_ShrunkRange accordingly.
- The new class BRepAlgoAPI_Check has been added according to the bug 0023648.
- Some regressions have been fixed.
- The following test cases have been marked as invalid or rewritten
bugs modalg buc60462_2, 60531_2, 60776_1, bug472_1, bug472_2, bug472_3, bug497_3, bug62
bugs moddata bug26_1, bug26_2,
- The test case bugs modalg buc60533 has been rewritten to use the general fuse algorithm for building the result.
- The new value of the result has been set in the test case bugs modalg 60776_2.
- The following test cases have been rewritten according to the new format of the bsection command
bugs modlag fra62369, pro18892
bugs moddata bug75_1, bug75_2
- Corrected BRepAlgoAPI_Check.
- Removed package BOPTColStd.
- Rewritten test cases caf named_shape F8 F9.
- Removed unnecessary comments.
- Corrected the following test scripts :
boolean bcut_complex(012) O3 O4 O5 O6 O8
boolean bfuse_complex(013) O5 O6 P8
boolean bopcommon_complex(021) D8 D9
boolean bopfuse_complex(022) H1 J6
boolean boptuc_complex(024) D5
bugs modalg(006) bug399 bug497_1
feat featprism(003) C4
- Corrections in the treatment of section edges (putting paves on the curves);
- Corrections in BRepOffset_Tool;
- The following test cases have been rewritten according to the new format of the bsection command
bugs modalg bug6502, bug6554, bug6766_1, bug6766_3
- The new value of the result has been set in the following test cases
bugs modalg bug1255, bug1255_1
- The following test cases have been marked as invalid or rewritten
bugs modalg bug472_2, bug472_3, bug825_2
bugs moddata bug10603, bug152_1, bug152_2, bug3721_1, bug3721_2, bug3721_3
- The following test cases have been rewritten as improvements
bugs modalg bug693, bug693_1, bug817_1
bugs moddata bug3721_5, bug3721_6, bug6862_3, bug6862_4, bug6862_6
- Test cases bugs modlag buc60787_1, buc60787_2, buc60788_2, buc60788_3 have been corrected.
- Fixed some SALOME regressions (modifications in the treatment of the section edges);
- Fixed test case bugs modalg bug23100;
- Test cases bugs modalg bug21754, bug22990 have been corrected according to the new format of the bsection command.
- Test cases bugs modalg bug13116_*, bug23711 have been fixed;
- Test cases bugs modalg bug697_2, bug697_4, bug697_7, bug697_8 have been marked as invalid according to the issue 0022033;
- Test cases bugs modalg bug22109_2, bug22109_3 have been corrected;
- Test case bugs modalg bug18186 has been corrected as it is improvement;
- Test case bugs modalg bug22802 has been deleted as there is no package BOPTColStd.
