New algorithms calculating global properties on mesh data have been added:
- BRepGProp_MeshCinert computes the global properties of polylines represented by a set of points;
- BRepGProp_MeshProps computes the global properties of a surface mesh.
Existing tool BRepGProp now automatically uses new algorithm for triangulation-only faces.
By default, algorithm will use exact geometry objects (surfaces), when it is available (as before the patch);
this behavior can be switched by a new flag UseTriangulation, forcing usage of triangulation instead of exact geometry when both defined.
Implementation of the method for simplification of the result of Boolean Operation on the API level.
The method BRepAlgoAPI_BuilderAlgo::SimplifyResult has been added, so the derived classes such as BooleanOpeation and Splitter can also use this method.
The result shape simplification should be called after the operation is done. The simplification is performed by the means of ShapeUpgrade_UnifySameDomain algorithm.
Draw command "bsimplify" has been added to control the simplification options.
Documentation for new functionality and draw commands controlling the options of Boolean operations.
Test cases for the new functionality.
Side-effect change:
The algorithms in Boolean component have been changed to use the BRepTools_History as a History tool.
Now it became possible to disable the collection of shapes modifications during Boolean Operations, which may be useful for performance sake (in draw the option is controlled by *setfillhistory* command).
Draw command "unifysamedom" has been changed to accept the angular tolerance in degrees instead of radians.
Substitution of degenerated edges by their copies is implemented to make edges not shared
in BRepPrimAPI_MakeRevol::Build().
Method BRepPrimAPI_MakeRevol::Generated(...) is changed in order to use history of substitutions.
Test case is added.
The API classes in the package BRepAlgo providing access to old Boolean operations (Fuse, Common, Cut, Section) are marked as deprecated.
Corresponding classes from the package BRepAlgoAPI should be used instead.
Implementation of the mechanism for unification of the history commands for all OCCT algorithms.
The following Draw commands should be used to track the history of shapes modifications of any operation:
- modified - to find the shapes modified from the given shape in the given history.
- generated - to find the shapes generated from the given shape in the given history.
- isdeleted - to check if the given shape has been deleted during operation.
The mechanism allows fast & easy enabling of the DRAW history support for the algorithms supporting the history on the API level (i.e. the algorithm should have the methods Modified(), Generated() and IsDeleted()).
To enable the draw history support it is necessary to store the history of the algorithm into the session. For instance:
TopTools_ListOfShape Objects = ...; // Objects
TopTools_ListOfShape Tools = ...; // Tools
BRepAlgoAPI_Cut aCut(Objects, Tools); // Boolean cut operation
BRepTest_Objects::SetHistory(Objects, aCut); // Store the history for the Objects (overwrites the history in the session)
BRepTest_Objects::AddHistory(Tools, aCut); // Add the history for the Tools
To get the stored history in draw the command "savehistory" should be used. It saves the history kept in session into a Drawable object with the given name:
# perform cut
bcut r s1 s2
# save history of cut
savehistory cut_history
explode s1 f
modified m cut_history s1_1
The Draw History commands of the following algorithms have been removed:
- Boolean Operations;
- Defeaturing;
- Unify same domain;
- Sweep;
- Thrusections;
All these algorithms have been switched to support the new Draw history mechanism.
The Fillet and Blend algorithms have been also enabled to support history commands.
The usage of *BRepAlgo_Section* has been replaced with the usage of *BRepAlgoAPI_Section* in *BRepProj_Projection* algorithm.
The TODO statements have been removed from the failing test case in the "prj" grid as they are working correctly now.
The following changes have been made to improve the performance *BRepAlgoAPI_Section*:
1. Revision of the *IntPolyh_Intersection* class to avoid repeated calculation of the deflection of the same triangulation.
2. Small revision of the Edge/Face intersection algorithm to perform Extrema computation on the whole intersection range of the edge instead of discrete ranges.
3. Implementation of the extrema computation for the Circle and Sphere.
4. Correct computation of the parameter of the point on the Circle.
An extended draw-command trotate (ttranslate, tmirror, ...) by an additional parameter "-copy".
New check of edge range is added in BRepCheck/BRepCheck_Edge.cxx
The same checking is added in ShapeAnalysis_Edge.cxx
Fixing this problem is added in ShapeFix_Wire.cxx
GeomLib::SameRange(...) and BRepTools_TrsfModification::NewCurve2d(...) are modified to avoid exception in TrimmedCurve
1. The class Bnd_OBB has been created to describe the Oriented Bounding Box.
2. Several key methods have been implemented: Bnd_OBB::IsOut(...), Bnd_OBB::Add(...) and Bnd_OBB::Enlarge(...).
3. Interface of Bnd_Box class has changed. New methods have been created. See Bnd_Box.hxx for detailed information.
4. BRepBndLib and Draw_Box classes have been amended in order to provide correct work with Bnd_OBB class.
5. Interface of "bounding" DRAW-command has been changed. Please see help for detailed information.
6. New DRAW-command "isbbinterf" has been created. Please see help for detailed information.
7. "boundingstr" and "optbounding" DRAW-commands have been eliminated because their function can be made by "bounding" DRAW-command (e.g. see tests/bugs/vis/buc60857 or samples/tcl/snowflake.tcl test cases).
8. Documentation has been updated.
1. The package BOPCol has been fully removed:
- *BOPCol_BaseAllocator* is replaced with *Handle(NCollection_BaseAllocator)*;
- *BOPCol_BoxBndTree* is replaced with *BOPTools_BoxBndTree*;
- *BOPCol_Box2DBndTree* is removed as unused;
- *BOPCol_DataMapOfIntegerInteger* is replaced with *TColStd_DataMapOfIntegerInteger*;
- *BOPCol_DataMapOfIntegerListOfInteger* is replaced with *TColStd_DataMapOfIntegerListOfInteger*;
- *BOPCol_DataMapOfIntegerListOfShape* is replaced with *TopTools_DataMapOfIntegerListOfShape*;
- *BOPCol_DataMapOfIntegerMapOfInteger.hxx* is removed as unused;
- *BOPCol_DataMapOfIntegerReal* is replaced with *TColStd_DataMapOfIntegerReal*;
- *BOPCol_DataMapOfIntegerShape* is replaced with *TopTools_DataMapOfIntegerShape*;
- *BOPCol_DataMapOfShapeBox* is replaced with *TopTools_DataMapOfShapeBox*;
- *BOPCol_DataMapOfShapeInteger* is replaced with *TopTools_DataMapOfShapeInteger*;
- *BOPCol_DataMapOfShapeListOfShape* is replaced with *TopTools_DataMapOfShapeListOfShape*;
- *BOPCol_DataMapOfShapeReal* is replaced with *TopTools_DataMapOfShapeReal*;
- *BOPCol_DataMapOfShapeShape* is replaced with *TopTools_DataMapOfShapeShape*;
- *BOPCol_DataMapOfTransientAddress* is removed as unused;
- *BOPCol_IndexedDataMapOfIntegerListOfInteger* is removed as unused;
- *BOPCol_IndexedDataMapOfShapeBox* is removed as unused;
- *BOPCol_IndexedDataMapOfShapeInteger* is removed as unused;
- *BOPCol_IndexedDataMapOfShapeListOfShape* is replaced with *TopTools_IndexedDataMapOfShapeListOfShape*;
- *BOPCol_IndexedDataMapOfShapeReal* is removed as unused;
- *BOPCol_IndexedDataMapOfShapeShape* is replaced with *TopTools_IndexedDataMapOfShapeShape*;
- *BOPCol_IndexedMapOfInteger* is replaced with *TColStd_IndexedMapOfInteger*;
- *BOPCol_IndexedMapOfOrientedShape* is replaced with *TopTools_IndexedMapOfOrientedShape*;
- *BOPCol_IndexedMapOfShape* is replaced with *TopTools_IndexedMapOfShape*;
- *BOPCol_ListOfInteger* is replaced with *TColStd_ListOfInteger*;
- *BOPCol_ListOfListOfShape* is replaced with *TopTools_ListOfListOfShape*;
- *BOPCol_ListOfShape* is replaced with *TopTools_ListOfShape*;
- *BOPCol_MapOfInteger* is replaced with *TColStd_MapOfInteger*;
- *BOPCol_MapOfOrientedShape* is replaced with *TopTools_MapOfOrientedShape*;
- *BOPCol_MapOfShape* is replaced with *TopTools_MapOfShape*;
- *BOPCol_PListOfInteger* is removed as unused;
- *BOPCol_PInteger* is removed as unused
- *BOPCol_SequenceOfPnt2d* is replaced with *TColgp_SequenceOfPnt2d*;
- *BOPCol_SequenceOfReal* is replaced with *TColStd_SequenceOfReal*;
- *BOPCol_SequenceOfShape* is replaced with *TopTools_SequenceOfShape*;
- *BOPCol_Parallel* is replaced with *BOPTools_Parallel*;
- *BOPCol_NCVector* is replaced with *NCollection_Vector*;
2. The class *BOPDS_PassKey* and containers for it have been removed as unused;
3. The unused containers from *IntTools* package have been removed:
- *IntTools_DataMapOfShapeAddress* is removed as unused;
- *IntTools_IndexedDataMapOfTransientAddress* is removed as unused;
4. The container *BiTgte_DataMapOfShapeBox* is replaced with *TopTools_DataMapOfShapeBox*;
5. The class *BOPTools* has been removed as duplicate of the class *TopExp*;
NCollection_UtfString and NCollection_UtfIterator classes are refactored to use methods overloading instead of switches to dispatch implementation depending on character (Unicode code unit) size.
ICC-specific preprocessor directives are added to avoid warnings.
Unused local functions and variables, class methods, unreachable statements, and extra throw() declarations reported by ICC are removed.
Usage of "expl" for name of local variable is avoided as it conflicts with standard C function "expl" defined in math.h as preprocessor macro.
Non-standard (MS-specific) argument envp is removed in definition of main() function on Windows.
Functions _main_ and _WinMain_ are renamed to Draw_Main and Draw_WinMain, respectively, to avoid using names reserved in C++.
Doxygen warning is fixed in XDE User's Guide.
New macro Standard_FALLTHROUGH is defined for use in a switch statement immediately before a case label, if code associated with the previous case label may fall through to that
next label (i.e. does not end with "break" or "return" etc.).
This macro indicates that the fall through is intentional and should not be diagnosed by a compiler that warns on fallthrough.
The macro is inserted in places that currently generate such warning message and where fallthrough is intentional.
Doxygen comments are provided for this and other macros in Standard_Macro.hxx.
Simple offset algorithm (BRepOffset_MakeSimpleOffset) is improved to handle the case when bspline surface has imprecise singularity at one of sides (when side is degenerated but not exactly to one point).
In such case, the algorithm tries to collapse all poles of singular side of the surface to the same point; this allows avoiding flapping of normal due to small fluctuations of surface.
If face being offset contains degenerated edges, then check for singularity is done using position and tolerance of corresponding vertices.
In addition, each side is checked with some user-defined tolerance (by default Precision::Confusion()); this helps to process cases when no edge is located at that side or if such edge is not encoded as degenerated.
New parameter Tolerance is introduced for that in BRepOffset_MakeSimpleOffset class.
Tests added:
bugs modelg_7 bug28968 - on isolated faces as reported in the issue, mostly for visual check (absence of loops)
offset simple F01-05 - on original shells, checking tolerances of resulting shell
0. Basic tools for defining classes representing alerts (errors, warnings etc.) and collecting them during execution of algorithms are added in Message package.
1. Refactoring of the Error/Warning reporting system of the algorithms in Boolean Component.
To dump the description of the Error/Warning status of the algorithm the DumpErrors/DumpWarnings method should be called.
Also, the methods GerErrorMsg(int Error) and GetWarningMsg(int Warning) have been implemented to get the description for the given Error/Warning.
All Error/Warning statuses are now listed in the enumeration ErrorStatusEnum/WarningStatusEnum of the algorithm.
It is also possible to get the shapes for which the warning has been set by using the method GetWarningShapes().
2. The new class BOPAlgo_Options has been created to unify the options of the BOPAlgo_* and BRepAlgoAPI* algorithms.
3. The new checks across the algorithms have been added to detect and report errors and warnings.
4. Test cases
boolean bopcut_complex B9 E1 E5 E8
boolean bopfuse_complex B4 B5 C9 D1 D4 D5 D6 D7
have been rewritten to use Cells Builder algorithm instead of Boolean Operations algorithm, because latter always returns error "Unsupported Boolean operation" for these cases.
5. New chapter has been added in the user guide for Boolean Operations - Error / Warning reporting system.
6. Added comment to NCollection_List::Remove(Iterator&)
1. Clearance of fields of class has been added to the method BRepFill_PipeShell::Prepare().
2. Calculation of error on surfaces has been corrected in the method GeomFill_Sweep::BuildKPart().
3. New Draw command "errorsweep" has been added to check the error reached on the surfaces built by BRepOffsetAPI_MakePipeShell algorithm.
- New method BRepLib::FindValidRange() has been added. It computes the range of the edge not covered by boundary vertices.
- The algorithm of calculation of valid intersection range in the class IntTools_ShrunkRange has been corrected to use the new method.
- The method BOPTools_AlgoTools::MakeSplitEdge() has been improved to protect against errors in the case of reversed orientation of the input edge.
- Two new Draw commands have been added:
validrange - it calls the new method BRepLib::FindValidRange().
tolsphere - it shows tolerances of vertices by drawing a sphere around each vertex of the shape.
- The test cases "offset shape_type_i_c YE1,YE2" became better. The scripts have been corrected to reflect the new state.
1) BRepLib::UpdateTolerances(..) & BRepLib::SameParameter(..) functions now support non-mutable input feature. reshaper is used to store modified copies of subshapes of original (input) shape(s) as substitutions.
2) IsNewShape(..) method has been added to BRepTools_ReShape to check if the given shape has been recorded as a value
1. The TestTopOpe* packages have been removed.
2. The commands *compare*, *issubshape* and *projponf* have been moved to BRepTest package.
3. The possibility to change the Extrema options has been added to projection algorithm (GeomAPI_ProjectPointOnSurf).
4. Documentation has been updated.
1. Removal of the traces of the usage of old Boolean operations in BRepFeat package.
2. The DRAW commands *fubl* and *cubl* based on old Boolean operations have been removed.
The alternative for these commands are the commands *bfuseblend* and *bcutblend* respectively.
The last two commands are based on the modern Boolean operations.
3. The DRAW command *ksection* based on old Boolean operations has been removed.
The command *bsection* should be used as alternative.
Test cases which have been using the *ksection* command have been modified to use the *bsection* command.
4. The class QANewBRepNaming_BooleanOperation has been modified to use modern Boolean operations.
The class QANewBRepNaming_BooleanOperation has been removed as not used.
The class QANewBRepNaming_BooleanOperationFeat has been renamed to QANewBRepNaming_BooleanOperation as it has nothing to do with Feat algorithm.
Virtual method Generated is redefined. Now it returns:
- chain of generated faces for sub-edge of a profile;
- chain of generated edges for sub-vertex of a profile;
- bunch of chains of generated edges for start or end vertex if it is degenerated section.
Correction according to the remarks.
Fix compiler's warnings and add 4 new test cases.
Correction of mistake.
Compilation warnings are gone.
Macro NO_CXX_EXCEPTION was removed from code.
Method Raise() was replaced by explicit throw statement.
Method Standard_Failure::Caught() was replaced by normal C++mechanism of exception transfer.
Method Standard_Failure::Caught() is deprecated now.
Eliminated empty constructors.
Updated samples.
Eliminate empty method ChangeValue from NCollection_Map class.
Removed not operable methods from NCollection classes.
Now, GeomPlate_BuildPlateSurface accepts base class Adaptor3d_HCurve and of course array of Adaptor3d_HCurve.
Classes GeomPlate_Array1OfHCurveOnSurface and GeomPlate_HArray1OfHCurveOnSurface have been renamed to GeomPlate_Array1OfHCurve and GeomPlate_HArray1OfHCurve correspondingly.
Documentation has been updated.
Correction in documentation.
Extrema between curves has been made producing correct result for the cases of solution located near bounds.
- Class math_GlobOptMin has been improved to use lower order methods of local optimization when high-order methods are failed.
- Add support of conditional optimization (in bounds) in the classes math_BFGS and math_BracketMinimum.
- Turn on conditional optimization in the case of usage of math_BFGS in the class math_GlobOptMin.
- Correct mistake in distmini command, which caused incorrect reading of deflection parameter.
- To avoid possible FPE signals, ensure initialization of fields in the class math/math_BracketMinimum.
- In the algorithms math_BFGS, math_Powell and math_FRPR, take into account that the function math_MultipleVarFunction can return failure status (e.g. when computing D0 out of bounds).
New test cases have been added.
Tests cases are updated.
// correct test case
New topology-preserving offset algorithm has been added. It allows to construct offset shape of build solid.
test cases have been added.
Documentation has been updated to be up to date.
Minor corrections.
Grid is renamed for simplification purposes.
Old constructors are restored with Standard_DEPRECATED macros.
The algorithm BRepExtrema_DistShapeShape has been protected against exceptions when non-geometric shape data is given on input, like a face containing triangulation only or an edge containing polygon only. Such faces/edges are ignored by the algorithm.
BRepGProps::VolumeProperties() now ignores faces without geometric surface to avoid access violation.
Extension on the 3D Offset algorithm (Mode="Complete", Join Type = "Intersection")
for colliding cases to add support for new configurations of the shapes.
In the previous approach the result of the offset operation was build from
the offset faces using MakerVolume algorithm, without checking of the validity of these faces.
The new extension is based on this approach, but now the offset faces are being checked
on invalidity and rebuild in case of any. This allows (in case of successful rebuilding) to avoid creation
of the unforeseen parts such as dangling parts, spikes, inverted faces in the result of offset operation.
The main criteria for the validity of the faces is the coincidence of the normal
direction of the offset face with the normal direction of the original face.
Check for removal of invalid faces has been removed as obsolete.
BRepOffset_Inter2D: Avoid excess trimming of the edges due to coincidence with other edges.
BRepOffset_Inter3D: Careful treatment of the intersection of the faces connected only through vertices.
Eliminating the compiler warning.
Small corrections of test cases for issue CR26917
The method BRepOffsetAPI_MakePipeShell::Generated now returns generated shapes for sub-edges and sub-vertices of sections.
The method BRepFill_PipeShell::BuildHistory is redesigned: now it builds generated shapes for sub-edges and sub-vertices of sections.
New Draw command "gensweep" is added to sweep commands for testing of history building.
Check for null shape has been added in the command addsweep implementation.
// eliminate warning
Test case for issue CR24932
Test case has been corrected.
Added DRAW command dsetsignal, resetting OSD signal handler with either armed or disabled FPE handler, according to an option.
If called without arguments, it sets FPE handler only if environment variable OSD_FPE is defined (with value different from 0).
On start, DRAW calls dsetsignal to set FPE signal if CSF_FPE is defined.
Test bugs fclasses bug6143 uses dsetsignal to set FPE handler unconditionally before the test command, and resets it to default at the end.
A number of changes in the code have been done in order to fix floating point exceptions that became generated after enabling signals:
- Global functions Sinh() and Cosh() defined in Standard_Real.hxx are improved to raise Standard_NumericError exception if argument is too big (greater than 710.47586), instead of relying on system treatment of floating point overflow. These functions are used instead of sinh and cosh in ElCLib.cxx.
- Maximal value of parameter on hyperbola is restricted by 23 (corresponding to ~1e10 in 3d) in order to avoid FP overflow in Extrema_GenExtCS.cxx, ShapeFix_EdgeProjAux.cxx.
- Interface of the root curve adaptor class Adaptor3d_Curve has been updated to add new virtual methods BasisCurve and OffsetValue. They complement the adaptor for the case of offset curves. These methods are used in Extrema_GenExtCS.cxx to restrict domain search in the case of offset of hyperbola, in order to get rid of floating point overflow. All classes inheriting Adaptor3d_Curve have been changed to implement the new virtual methods.
- Protection against division by zero has been implemented in ApproxInt_KnotTools.cxx, BRepClass3d_SClassifier.cxx, BRepGProp_Face.cxx, BRepMesh_FastDiscretFace.cxx, Geom2dGcc_Circ2d2TanOnIter.cxx, Geom2dInt_Geom2dCurveTool.cxx, IntPolyh_MaillageAffinage.cxx.
- Protection against calling of math functions of infinite arguments has been added in BRepCheck_Edge.cxx, BRepLib.cxx, CSLib_NormalPolyDef.cxx, Extrema_FuncExtPC.gxx, Extrema_GExtPC.gxx, Extrema_GLocateExtPC.gxx, Intf_InterferencePolygonPolyhedron.gxx, ShapeAnalysis_Surface.cxx, ShapeAnalysis_TransferParametersProj.cxx, ShapeAnalysis_Wire.cxx, math_FunctionSetRoot.cxx.
- Proper initialization of local variables is done in BOPAlgo_PaveFiller_6.cxx, XSDRAWSTLVRML.cxx.
- Inconsistent usage of Standard_Boolean* to access integer data in HLR (caused by #27772) is corrected
Some test cases have been updated to actual state.
Code has been updated to remove no-op casts and implicit casts to Standard_Boolean.
Places of inproper use of Standard_Boolean instead of Standard_Integer
have been corrected:
- Bnd_Box, Bnd_Box2d
Bit flags are now defined as private enum
- HLRAlgo_BiPoint, HLRAlgo_EdgesBlock, HLRBRep_EdgeData, HLRBRep_FaceData
Bit flags are now defined as enum
- HLRAlgo_EdgeStatus, HLRBRep_BiPnt2D, HLRBRep_BiPoint
Bit flags are now defined as bool fields
- HLRAlgo_PolyData
Bit flags are now defined as Standard_Integer
- OSD_DirectoryIterator, OSD_FileIterator
Boolean flag is now defined as Standard_Boolean
- ShapeAnalysis_Surface::SurfaceNewton()
now returns Standard_Integer (values 0, 1 or 3)
- ChFi2d_FilletAlgo
now uses TColStd_SequenceOfBoolean instead of TColStd_SequenceOfInteger
for storing boolean flags
Method IFSelect_Dispatch::PacketsCount() has been dropped from interface.
ShapeFix_Solid::Status() has been fixed to decode requested status
instead of returning integer value.
TopOpeBRepBuild_Builder1 now defines map storing Standard_Boolean values
instead of Standard_Integer.
Persistence for Standard_Boolean type has been corrected
to keep backward compatibility:
- BinMDataStd, BinTools, FSD_BinaryFile
Broken Draw Harness commands vdisplaymode and verasemode have been removed.
BRepMesh_FastDiscretFace::initDataStructure() - workaround old gcc limitations
BRepMesh_IncrementalMesh::clear() - avoid ambiguity
1) BRepBuilderAPI_MakeWire::Add (const TopTools_ListOfShape &L) method have been completely rewritten. The order of edges is not significant now.
2) The geometric proximity of free vertices from already existing wire and from input list of edges are also have been taken into account. If such vertices are coincident with each other then they are fused into the one. The original wire remains untouched topologically (yet the tolerances and points can be modified).
3) UBTreeFiller is used to speed up the process of picking of coincident vertices.
4) BRepLib now contains the 'new' method - BoundingVertex(..). The implemenation of this method are taken from BOPTools_AlgoTools::MakeVertex(..).
5) The '-unsorted' argument have been added to 'wire' command.
Conflicts:
src/QABugs/QABugs_20.cxx
Add missing include.
Eliminate warning.
Add method for exact calculation of bounding boxes
Modifications made according to remarks.
Small correction of test case for issue CR27352
Small correction of test cases for issue CR27352
Avoid warning on VS2015
The new method has been added in the class BRepFeat_SplitShape for addition of the sequence of the splitting edges or wires for the whole initial shape without specification of the edge->face, edge->edge mapping.
The procedure of collecting wires has been corrected so as not to take into account the distance in 2D space between adjacent edges having a common vertex.
New category of tests "bugs/splitshape" has been added to non-regression data base.
Test cases for issue CR27520
Remove compilation warnings.
Add dependence of TKFeat on TKShHealing in EXTERNLIB in order to build with genproj.
- removal of excess interferences in case of simple hiding face
- correct processing of boundary edges coinciding with outlines
- change of API for testing Draw Command
- correction of Draw command "build3d"
- test cases are added.
Linux reference data is changed.
Partially fixed 0027340: Insufficient exact HLR speed
Number of samples in PolyPoly intersection algorithm tuned in each instance of generic class.
Default number of the samples in Geom2dAdaptor is changed according to the Adaptor2d_Curve2d class.
Minimal number of points in case of B-Spline is changed.
Minimal number of samples support is added in intersection algorithms.
Method BRepLib::EncodeRegularity() is improved to set regularity GeomAbs_CN for edges lying on the same-domain surfaces (where derivatives on both surfaces are equal in all points).
DRAW command getedgeregularity is added to query regularity of the edge on specified faces.
DRAW command edgeregul is removed (this functionality is provided by command encoderegularity).
Added tests: bugs modalg_6 bug27272, bug27383_1, bug27383_2
Correction of shape name in test case for issue CR27272
New flag is inserted in parameters of static methods LinearProperties(...), surfaceProperties(...), volumeProperties(...). This flag defines to skip or not to skip second and next appearance shared topology entities (edges, faces, shells) in properties calculation.
Corresponding Draw commands is modified to take in account new parameter.
Test case for issue CR27273
Add option -skip into checkprops command
1) Macro definition WNT replaced by _WIN32 and _MSC_VER for platform and compiler detection accordingly.
2) Macro definition LIN replaced by __linux__ macro.
3) Macro definition DEB replaced by OCCT_DEBUG macro.
1. Check face location has been added.
2. Message, if mkplane command fails, has been added.
3. Test case for this issue has been created.
Changes in accordance with the remark.
Small correction of test case for issue CR26687
Method for preanalysis of input data added (CheckInputData).
Now it is possible to work with Error() function, which return error code.
Extended output support for all offset commands added.
Test-cases for issue #26556
* The possibility to copy mesh is implemented. It may be enabled by copyMesh flag, by default it is disabled.
* Poly_Triangulation::Copy() method is added.
* The mesh is copied if and only if copyMesh flag is true.
Automatic upgrade of OCCT code by command "occt_upgrade . -nocdl":
- WOK-generated header files from inc and sources from drv are moved to src
- CDL files removed
- All packages are converted to nocdlpack
Code corrected to avoid ambiguous situations due to changed implementation of Handle (overloaded methods accepting handles of different types).
In Adaptor3d_CurveOnSurface added method Load() with two parameters, allowing to avoid ambiguity of cast of handles when calling separate methods Load() for curve and surface, replacing by single call.
In DrawTrSurf and IGESData_IGESWriter, template variants of methods Set() and Send(), respectively, are added to avoid ambiguity when these methods are called with handles to derived types (using SFINAE).
In NCollection_DefineHSequence, method Append() accepting handle to another HSequence is made template, to be available only if argument has compatible type.
Automatic update by command "occt_upgrade . -downcast"
C-style cast of Handle to that of derived type (now illegal) is replaced by call to DownCast()
Const reference local variables of Handle type initialized by result of DownCast are replaced by normal variables.
Missing headers added; includes of headers "Handle_...hxx" removed.
Misuses of macro Handle() and its use in typedefs corrected.
Alias classes Profile and Option are removed from IFSelect; ones defined in MoniTool are used directly.
Removed header files defining only Handle classes (except Image_PixMap_Handle.hxx)
Classes SelectMgr_BaseFrustum and now inherit Standard_Transient and can be manipulated by Handle (not NCollection_Handle)
Fixed reference-type local variable pointing to temporary object
Use of handle in conditional expressions and comparisons to NULL are replaced by call to method IsNull()
