1. Exception in intersection of two analytical faces has been fixed by adding a simple check on number of vertices
in the resulting analytical curve;
2. Projection of the Circle on the Cone now checks if the Circle's normal direction is parallel to the Cone direction.
If it is not, the different, more advanced, algorithm will be used for projection - ProjLib_ComputeApprox;
3. Intersection of the Edge with the Face (IntTools_EdgeFace algorithm) in QuickCoincidenceCheck mode has been fixed to
avoid the checking of the type of the intersection result if the coincidence check gives the positive result;
4. All common IN edges of the intersecting faces has been added for intersection with section edges to avoid self-intersection in the result;
5. Post treatment of the section edges in Boolean operations has been improved with the new stage which treats the possible
common zones, not detected by the intersection algorithm, between faces by intersecting each section edge with all faces,
not participated in its creation, and in case of coincidence putting it as IN edge into FaceInfo structure of the face.
The new function has been implemented for that - BOPAlgo_PaveFiller::PutSEInOtherFaces().
6. Checking for the SameDomain splits of faces in Boolean Operations has been modified to process the pairs of faces in
which both the section curves and common zones are present.
7. Adjustment of the test case boolean gdml_private ZH3 as improvement.
8. Test cases for the issue.
9. Test cases for the parent issue - 0026789.
While checking the SurfaceOfExtrusion on closeness (GeomLib::IsClosed())
it is necessary to take into account that the basis curve may be not trimmed.
Test case for the issue.
The main idea of the fix is to forbid check if intersection curve lies in the some face (with input tolerance) if we have 2D-intersection curve on this face (we consider that necessary tolerance has been computed in intersection algorithm honestly). If we do not have 2D-curve on this face then we need check as before.
New algorithm is implemented in IntTools_Context::IsValidBlockForFaces(...) method.
------
src\Extrema\Extrema_GenExtPS.cxx
No principled changes have been made.
Virtual method Generated is redefined. Now it returns:
- chain of generated faces for sub-edge of a profile;
- chain of generated edges for sub-vertex of a profile;
- bunch of chains of generated edges for start or end vertex if it is degenerated section.
Correction according to the remarks.
Fix compiler's warnings and add 4 new test cases.
Correction of mistake.
Compilation warnings are gone.
New method CheckFaceSelfIntersection has been added to BOPAlgo_CheckerSI: now self-intersection of each face is found as well as pairs of intersecting faces;
-method IntPatch_Intersection::Perform(S1,D1,TolArc,TolTang) is modified for more effective search of self-interasections in case of Surface Of Extrusion;
-method IntCurve_IntPolyPolyGen::Perform(C1,D1,TolConf,Tol,NbIter) is modified to detect segments of intersections.
Small correction.
Test cases are corrected.
Correction of compiler error
Fix of regressions
Names of shapes correction
Unit test and additional parsing rule for tests are added as well as a minor fix of the draw command for bug24164_2 unit test (in reference array it was impossible to set only one value).
Added the exception for the checking in issue 2269, when bad document is read.
It checks that there is no crash, but just an error message. If crash is appeared, this test will not skipped anyway.
Correction of test for bug2269 and parse.rules
1. The static method Standard_Real MinStep3D(...) in the class BOPTools_AlgoTools is
now checks if the computed 3D step is too big (relatively UV range of the faces)
for any of the faces.
2. The method PointInFace(...) of the class BOPTools_AlgoTools3D has been redesigned.
The new PointInFace(...) methods have been implemented to add possibility for looking the point
inside the face in necessary direction and distance from the edge of the face.
Note: old implementation is also functional.
3. Make methods for finding points near edges and computing normal directions on faces
return error status (0 in case of success).
4. Test case for the issue.
5. Test cases offset shape_type_i_c XJ2,XJ4,XJ5,XJ6 are improvements.
Removing useless file
Macro NO_CXX_EXCEPTION was removed from code.
Method Raise() was replaced by explicit throw statement.
Method Standard_Failure::Caught() was replaced by normal C++mechanism of exception transfer.
Method Standard_Failure::Caught() is deprecated now.
Eliminated empty constructors.
Updated samples.
Eliminate empty method ChangeValue from NCollection_Map class.
Removed not operable methods from NCollection classes.
The patch fixes transformation persistence for various set of GCC compilers.
1) Optimized template-specialized operator /= for division (causes bugs)
of NCollection_Vec4 was replaced with non-specialized version.
2) NCollection_Vec4::xyz() is not used since compiler uses modifiable-reference
returning version, which invokes warning of possible strict-aliasing rules
violation and leads to incorrect behavior of the reference.
If the line is in the circle-plane completely (or parallel to the circle-plane) then extremas and intersections in 2D-space are looked for. These case are pure analytical and solutions will be found precisely.
1) In Views menu the check button item "Extended view commands" has been added. Pressing on it shows/hides the set of buttons in the main window that allow manipulating of view zoom/pan/rotate by mouse.
2) New category of commands "Vector and measurement Commands" has been added. The commands in this category allow simple calculations using 2D and 3D vectors, such as cross and dot products, computation of distances of points to other objects, and other functions.
3) The new command "pickf" has been added in "DRAW Variables management" category. It allows extracting a picked with mouse face included in some shape as a new variable.
4) New commands "del" and "era" have been added in "DRAW Variables management" category. They allow deleting (destructing) or erasing (from view) variables matched by glob pattern.
5) Missing help for some commands like "don", "disp" and others has been added.
1. The methods PerformVZ, PerformEZ, PerformFZ and PerformZZ have been transferred from BOPAlgo_PaveFiller to BOPAlgo_CheckerSI class
to perform intersection of sub-shapes with solids only in self-intersection mode.
2. The checks for solids built from the same (shared) faces have been added into methods building the result of Boolean operations -
BOPAlgo_BOP::BuildRC() and BOPAlgo_BOP::BuildSolid().
3. Since the NonDestructive mode is now natively supported by the BOPAlgo_PaveFiller the methods providing the support of this mode by CheckerSI
(BOPAlgo_CheckerSI::PrepareCopy() and BOPAlgo_CheckerSI::PostTreatCopy()) are not needed and have been removed.
4. The pairs of sub-shapes with interfering bounding boxes are now sorted before real intersection to guarantee the constant order of
intersection of sub-shapes and produce more stable result. The class BOPDS_PassKey has been replaced with simpler class BOPDS_Pair.
5. The class BOPDS_SubIterator has been refactored.
6. Test cases for the issue.
7. Adjustment of the test case boolean volumemaker D2.
1. Earlier we could not put any IntPatch_Point to the intersection curve. The fix makes the algorithm of IntPatch_Points searching more precise. It is achieved by redetermination of earlier found vertices with help of minimization the distance between boundary of one intersection argument and another intersection argument (surface).
2. Additional check has been added, if IntPatch_Point adjusted to the domain boundary is true intersection point.
3. Method Contap_ArcFunction::Surface() has been added.
4. Method LastComputedPoint() has been added for IntPatch_ArcFunction and Contap_ArcFunction classes.
5. Correction in FindMaxDistance() method (see IntTools_FaceFace.cxx file) according to pure Golden-ratio minimization algorithm. Earlier this function worked wrong with small searching intervals.
6. Insignificant correction in math_BrentMinimum.cxx file (elimination of "defines").
Creation of test case for issues #27221 an #27252.
Adjusting some test cases according to their new behavior.
Correction according to the last remarks.
Small correction of shape names for issue CR27252
Test case for issue 28210
Small correction of test case for issue 28210
Add new root label in Document for Views.
Add new attribute to store View in XDE.
Add object and tool to process Views.
Add new Draw commands for Views.
Method GetType() of class GeomAdaptor_SurfaceOfRevolution was modified to create plane instead Cone or SurfaceOfRevolution for "plane like" within Precision::Confusion() restricted object.
For infinite objects Cone with semiangle > PI/2 - eps is replaced by SurfaceOfRevolution for eps < Precision::Confusion()
Tests cases are added
Small correction of shape names for issue CR28261_28266
1. There has been implemented calculation of all possible types of continuity for shared edges:
* G1 is set if tangential planes are the same for connected faces in each control points through the edge;
* C1 is set in addition to G1 conditions if derivatives, orthogonal to the edge on each face, are equal vectors;
* G2 is set in addition to G1 if the centers of principal curvatures are the same for connected faces in each control points through the edge;
* C2 is set in addition to C1 and G2 if directions of principal curvatures are equal;
* CN continuity is set only if both connected faces are based on elementary surfaces (the conditions for this case are similar to C2 continuity).
2. ShapeFix::EncodeRegularity() is merged into BRepLib::EncodeRegularity().
3. Implemented several test cases to check correct handling of regularity.
4. Fix incorrect usage of BRepLib::EncodeRegularity() in BRepBuilderAPI_Sewing.
5. Implement a method for calculation of regularity on the given list of edges.
6. Documentation updates
AIS_InteractiveContext::Remove (anIObj, ...) removes object from sequence of detected owners.
Therefore further iteration on detected will not require updating this list with ::MoveTo().
Additional modification includes incrementing properly the iterator of CurrentDetectedObject
and resets iterator of Highlighted detected objects, because nothing is really highlighted after that.
- Implement top-down update for assemblies in XCAFDoc_ShapeTool
- Get rid of UpdateAssembly() method used for partial (parent-only) update
- Adjust STEP and IGES translators to use the top-down update after filling OCAF
- Implement XUpdateAssemblies Draw command
- Add test cases bug28055_1 and bug28055_2 for component removal and part update
- Update XDE documentation to mention the new UpdateAssemblies() method
Correction for issue CR28055
Adjusting of test case bugs/fclasses/bug28217
1. The result of Boolean operation on the arguments of collection type, containers WIRE/SHELL/COMPSOLID, is also a collection.
The containers of type WIRE included into result should now also (as the SHELLs) have coherent orientation of its sub-shapes.
For that the new method has been implemented (BOPTools_AlgoTools::OrientEdgesOnWire(TopoDS_Shape&)) which reorients edges for correct ordering.
The duplicating containers, i.e. containers with the contents completely included in other containers, are now avoided in the result of BOP.
2. The result of Fuse operation on Compsolids is now also will be Compsolid.
3. Documentation has been updated.
4. New test cases for the issue.
5. Adjusting test cases to current behavior.
Correction of test case bugs/modalg_4/bug726_2 according to the new behavior
The method for building splits of the face BRepOffset_MakeOffset::BuildSplitsOfFace has been redesigned to use the BOPAlgo_BuilderFace algorithm directly.
The methods FindInvalidFaces and TrimNewIntersectionEdges have been corrected to avoid possible instabilities.
The filtering of invalid edges by existing bounding edges has been corrected to avoid removal of valid splits.
The method BRepOffset_Analyse::Correct2dPoint has been modified to avoid unnecessary initialization of BRepAdaptor_Surface.
Adjustment of the test cases.
Test case bugs modalg_6 bug26513 has been modified to unify faces of the input shape before operation.
BOPAlgo_CheckerSI crashed due to building of pcurve for an edge not lying on surface. The fix avoids building of pcurves in this algorithm.
The new flag has been added in BOPAlgo_PaveFiller class (method SetAvoidBuildPCurve). It tells whether to avoid building pcurves. It is worth to set if the result is not used to create splits of faces, as in example with BOPAlgo_CheckerSI.
Static variable holding handle to the last raised exception is made thread-local on compilers that support C++11 keyword thread_local (MCVC++ 14+, GCC 4.8+, ICC 14+, CLang).
Test bugs fclasses bug28217 is added (BAD on vc < 14 and gcc < 4.8).
Test case tuning bugs/fclasses/bug28217
The method BOPTools_AlgoTools2D::AttachExistingPCurve has been corrected so that
to call BRepLib::SameParameter not on the target edge with the whole set of pcurves,
but rather on a temporary edge with 3D curve and copied pcurve only.
After that the updated pcurve is transferred to the target edge.
Small correction of test case for issue CR28221
Cosmetics, code clean up.
AIS_ColorScale now draw labels using Graphic3d_VTA_CENTER
vertical alignment flag, instead of incorrect own alignment logic.
The color bar now adds margin on the top simmetrical to the bottom.
AIS_ColorScale::SetSmoothTransition() - added new property
for displaying colorscale with smooth transition between color intervals.
AIS_ColorScale::SetHueRange() - added new property defining the hue angles
corresponding to minimal and maximum values on the color scale.
AIS_ColorScale::SetLabels() now allows setting the sequence of free labels,
which number does not match the number of intervals.
In this case the labels will be displayed at positions of virtual
intervals corresponding to the number of labels.
Disable SetSingleSolutionFlag when calling algorithm of curve-curve Extrema.
Now DistShapeShape will find all solutions, even if they are located on the same pair of edges.
The fix brings the speed down for the cases of coinciding curves.
Several improvements have been made in BO code to fix the bug:
- Create empty edge-edge interference if intersection is close to an end vertex. This will help to avoid creation of unnecessary edge-face intersections.
- Improve PutPaveOnCurve() method to join nearly located vertices when they are put on the same section curve.
- Add processing of same-domain vertices for section edges in UpdatePaveBlocks() method.
- Improve the method CorrectWires() in order to not increase vertex tolerance if it will cover the major part of an edge.
- Replace vertices of section edges by same-domain equivalents.
- In the algorithm BOPAlgo_WireSplitter, correct angles computation and evaluation, taking into account periodicity.
- Modify PostTreatFF to properly take into account the orientations of coinciding section edges.
- In IntTools_Context::ComputePE, check distance from the point to vertices of the edge if the projection to the curve is failure.
Tests update:
- test offset\faces_type_i\C9 has been updated; now instead of returning bad shape it returns null result.
Notes for porting:
- Modify BopAlgo_PaveFiller so that on output each interference refers to the new vertex that will hit in the result (same-domain of the initial new vertex).
- Make the method BOPDS_DS::Index() returning valid index for new shapes.
// eliminate compile warning on VC14
Draw command 'proj' has been improved:
- Add possibility to pass the starting point. If it is passed than the algorithm Extrema_GenLocateExtPS is used instead of standard projection.
- Make the output of the command more clear.
Test case bugs/moddata_3/bug28196 has been added.
AIS_InteractiveContext - removed the following unused properties:
- PreSelectionColor(), DefaultColor(), WasCurrentTouched(), ZDetection().
AIS_InteractiveObject - removed unused property SelectionPriority().
Prs3d_Drawer - removed properties HighlightStyle() and SelectionStyle().
Graphic3d_HighlightStyle has been superseded by Prs3d_Drawer
inheriting from new class Graphic3d_PresentationAttributes.
Graphic3d_PresentationAttributes (as Graphic3d_HighlightStyle replacement)
has been extended with new properties:
- ZLayer() defining Z-Layer for highlighting presentation.
- DisplayMode() defining display mode for highlighting.
StdSelect_BRepSelectionTool methods have been corrected to take
SelectMgr_EntityOwner instead of StdSelect_BRepOwner.
StdSelect_Shape - duplicated field myDrawer has been dropped.
AIS_InteractiveObject - myDrawer->Color() is now used instead of myOwnColor,
myDrawer->Transparency() instead of myTransparency
and myDrawer->ZLayer() instead of myZLayer.
PrsMgr_PresentationManager::Unhighlight() now unhighlight all modes.
The method taking Mode as argument has been marked deprecated.
New enumeration Prs3d_TypeOfHighlight has been introduced
defining different highlight types.
AIS_InteractiveObject::HighlightStyle() now takes enumeration argument
and defines different styles for Global and Local selection.
ComesFromDecomposition() property has been moved
from StdSelect_BRepOwner to SelectMgr_EntityOwner.
Extrema between curves has been made producing correct result for the cases of solution located near bounds.
- Class math_GlobOptMin has been improved to use lower order methods of local optimization when high-order methods are failed.
- Add support of conditional optimization (in bounds) in the classes math_BFGS and math_BracketMinimum.
- Turn on conditional optimization in the case of usage of math_BFGS in the class math_GlobOptMin.
- Correct mistake in distmini command, which caused incorrect reading of deflection parameter.
- To avoid possible FPE signals, ensure initialization of fields in the class math/math_BracketMinimum.
- In the algorithms math_BFGS, math_Powell and math_FRPR, take into account that the function math_MultipleVarFunction can return failure status (e.g. when computing D0 out of bounds).
New test cases have been added.
Tests cases are updated.
// correct test case
