1. The algorithm BOPAlgo_ShellSplitter has been improved for the cases with multi-connected edges
to produce as many shells as possible from the given input faces.
2. Building tool prism in BRepFeat_MakePrism has been changed in order to avoid self-intersections
in the cases when the limiting faces are intersecting.
3. Test cases for the issue.
4. Test cases boolean/bcut_complex/N9 and boolean/gdml_private/ZH3 are improvements.
5. Test cases boolean/volumemaker/C5 and boolean/volumemaker/C6 has been marked as BAD due to found problem in intersection algorithm.
The results in these cases obtained on the branch are better than on master, but still not complete.
Adjusting test case bugs/moddata_2/bug469 for its current behavior.
Treatment for single singular point is added.
Test cases are updated to the new behavior.
New test cases are added,
Message of "bad" state is corrected.
- Added function checkprops, set default tolerance parameter to 1.0e-4
- Using "area" instead of "square".
- Options "-equal\notequal" isn't used together with "-s" in blend and offset test cases.
- Correct regressions/differences/improvements and CPU problem (set props tolerance to 0.1)
- Corrected test cases to use checkprops proc.
- Correct image difference
- Updated TODOs in test cases.
- Updated test cases to get correct images of result shape
Changes:
class BRepCheck_Solid
method:
void BRepCheck_Solid::Minimum()
has been changed. The treatment of shells with INTERNAL faces has been added.
Added test case bugs/modalg_5/bug25735
Added TODOs in test cases according to issue 25735.
Changes:
class BOPTools_AlgoTools
static function:
Standard_Boolean FindPointInFace(const TopoDS_Face& aF,
const gp_Pnt& aP,
gp_Dir& aDB,
gp_Pnt& aPOut,
Handle(IntTools_Context)& theContext,
GeomAPI_ProjectPointOnSurf& aProjPL,
const Standard_Real aDt,
const Standard_Real aTolE)
Binormal calculation starts from the point located outside the tolerance circle of the edge
Test case for issue CR25432
Correction of test cases for issue CR25432
class BOPAlgo_Builder
method
void BOPAlgo_Builder::FillIn3DParts
(BOPCol_DataMapOfShapeListOfShape& theInParts,
BOPCol_DataMapOfShapeShape& theDraftSolids,
const BOPCol_BaseAllocator&)
Sort faces before its classification relatively to the solid.
Test cases for issue CR25319
Correction of test cases for issue CR25319
Range of changing of some analytic curves is computed by other methods. It allows computing face's boundaries with more precise.
Tolerance was increased to provide successful work of some algorithms.
Functions BRepOffsetAPI_MiddlePath::Build() and ApproxWithPCurves(...) (file IntTools_FaceFace.cxx) were changed according to new result of algorithm's work.
It is possibly for "outboundaried faces" (see bug#23675) to compute incorrect UV-Bounds, when first parameter is more than last. To avoid it, extended control of computed bounds was added.
Function for fail sameparameter fixing was added to HLRAppli_ReflectLines to avoid creation bad shapes after algorithm's work.
In file ShapeFix_ComposeShell.cxx only text formatting was changed.
Some test cases are changed according to their new behavior.
Added test case bugs/moddata_3/bug23511
Modifications 1
1. To avoid creation of micro edges in the class BOPAlgo_PaveFiller added two new functions ForceInterfVE and
ForceInterfVF which updates tolerance of Vertex to make it interfere with Edge and Face accordingly.
2. In the class BOPInt_Tools added new function IsInRange which checks whether two ranges cross each other.
3. In the class BOPTools_AlgoTools added new function IntersectCurves2d which intersects pcurves of the face
to check it on the self-interference.
4. In the function IntTools_BeanFaceIntersector::FastComputeExactIntersection() the check on the coincidence of the whole
edge with the face (BOPTools_AlgoTools::IsBlockInOnFace) replaced with the check on the coincidence of one intermediate point with that face.
5. Test cases bugs modalg_1 bug1255, bug1255_1 has been updated with more correct value of the result.
6. TODO statement has been removed from the test cases boolean bcut_complex B1,B3,B5,C2,C4,C6,C8 as they are correct.
Adding test case for issue CR23958
Modification 2
1. In class BOPAlgo_PaveFiller added new function CheckPlanes(nF1, nF2) that checks whether two planar faces have common or intersecting sub shapes.
If these two faces do not have such sub shapes there is no need to intersect them.
2. In the function BOPAlgo_PaveFiller::MakeBlocks() added block for reducing the tolerance values to the previous state for the vertices
that were put on the section curve (with increasing of its tolerance value) that was rejected by the algorithm.
Modification 3
Back to Extrema_ExtAlgo_Grad algorithm in extrema computations in Boolean Operations algorithm.
Modifications:
- BRepOffset/BRepOffset_Tool.cxx, Features and Fillets algorithms have been ported on new BO algorithm.
- Old BO algorithm, that was implemented in BOP, BooleanOperations and BOPTools packages, has - been deleted.
- Porting SALOME algorithms to new BOP algorithm.
- Fixing regressions. Rebased on current master.
- Corrections in post treatment of section edges;
- Corrections in the accordance with the bug 0023293;
- Small corrections in the bopcheck and bopargcheck commands.
- NCollection maps have been replaced by NCollection indexed maps to guarantee the constant order of sub-shapes in the result of boolean operation.
- Test case feat featprism M9 has been fixed.
- Test cases chl 902 E3 H3 have been fixed (corrections in the treatment of section edges).
- Test cases caf driver B6 B7, caf named_shape F6 F7 have been modified according to the new order of sub-shapes in the result of boolean operation.
- Test cases blend buildevol G1, blend simple K4, bcommon_complex C7, feat featprism L6 have been modified as they are improvements.
- Test case boolean bsection A3 has been modified according to the new syntax of the bsection command.
- Test cases boolean bfuse_complex J1 P9 have been fixed (the function IsInternalFace has been modified to use the function GetFaceOff);
- Test case chl 902 H3 has been fixed (changes in the treatment of section edges);
- Test case boolean bsection D8 has been modified (removed TODO statement);
- Test case boolean bsection A3 has been modified (as the shapes have been changed).
- Added correction of the tolerance values of the shapes according to the bug 0023610.
- test cases:
boolean bcommon_complex C3,
boolean bcut_complex F2 O7,
boolean bfuse_complex C4 C5 E4,
boolean bsection B6 M8 M9 N4 N5 N7,
boolean bfuse_simple ZP6,
draft angle G8,
feat featprism S2
have been marked as invalid according to the bug 0022033;
- New value of result has been set in the test cases :
boolean bopsection D4
boolean bsection R8
as it is correct.
- test case bugs modalg bug23472 has been rewritten according to the new format of bsection command.
- The classes IntTools_Context and IntTools_ShrunkRange have been replaced by BOPInt_Context and BOPInt_ShrunkRange accordingly.
- The new class BRepAlgoAPI_Check has been added according to the bug 0023648.
- Some regressions have been fixed.
- The following test cases have been marked as invalid or rewritten
bugs modalg buc60462_2, 60531_2, 60776_1, bug472_1, bug472_2, bug472_3, bug497_3, bug62
bugs moddata bug26_1, bug26_2,
- The test case bugs modalg buc60533 has been rewritten to use the general fuse algorithm for building the result.
- The new value of the result has been set in the test case bugs modalg 60776_2.
- The following test cases have been rewritten according to the new format of the bsection command
bugs modlag fra62369, pro18892
bugs moddata bug75_1, bug75_2
- Corrected BRepAlgoAPI_Check.
- Removed package BOPTColStd.
- Rewritten test cases caf named_shape F8 F9.
- Removed unnecessary comments.
- Corrected the following test scripts :
boolean bcut_complex(012) O3 O4 O5 O6 O8
boolean bfuse_complex(013) O5 O6 P8
boolean bopcommon_complex(021) D8 D9
boolean bopfuse_complex(022) H1 J6
boolean boptuc_complex(024) D5
bugs modalg(006) bug399 bug497_1
feat featprism(003) C4
- Corrections in the treatment of section edges (putting paves on the curves);
- Corrections in BRepOffset_Tool;
- The following test cases have been rewritten according to the new format of the bsection command
bugs modalg bug6502, bug6554, bug6766_1, bug6766_3
- The new value of the result has been set in the following test cases
bugs modalg bug1255, bug1255_1
- The following test cases have been marked as invalid or rewritten
bugs modalg bug472_2, bug472_3, bug825_2
bugs moddata bug10603, bug152_1, bug152_2, bug3721_1, bug3721_2, bug3721_3
- The following test cases have been rewritten as improvements
bugs modalg bug693, bug693_1, bug817_1
bugs moddata bug3721_5, bug3721_6, bug6862_3, bug6862_4, bug6862_6
- Test cases bugs modlag buc60787_1, buc60787_2, buc60788_2, buc60788_3 have been corrected.
- Fixed some SALOME regressions (modifications in the treatment of the section edges);
- Fixed test case bugs modalg bug23100;
- Test cases bugs modalg bug21754, bug22990 have been corrected according to the new format of the bsection command.
- Test cases bugs modalg bug13116_*, bug23711 have been fixed;
- Test cases bugs modalg bug697_2, bug697_4, bug697_7, bug697_8 have been marked as invalid according to the issue 0022033;
- Test cases bugs modalg bug22109_2, bug22109_3 have been corrected;
- Test case bugs modalg bug18186 has been corrected as it is improvement;
- Test case bugs modalg bug22802 has been deleted as there is no package BOPTColStd.
Modifications:
1.Test cases
2. locate_data_file from DrawResources/TestCommands.tcl
Fix for mesh end
Adjusting testing cases for current state of master using new organization of data files
Fix for #23273 issue.
Fix for #23273 issue (boolean/013/R9).
Modifications of tests according to #23260 issue.
Attempt to protect against hang-ups due to waiting for standard input
change of behaviour of offset/shape_type_i/D7 case.
Attempt to protect against hang-ups during initialization of menu in batch mode.
increase cpulimit for parallel incmesh.
#23260 is fixed. count_parallel is not needed anymore.
Deleted unused code.
change of behaviour of offset/shape_type_i/D7 case.
The fix was incorrect.
Second attempt to protect against hang-ups during initialization of menu in batch mode
correction of tests in order to awoid instability.
Elapsed time changed to CPU user time is performance tests.
Processing of errors on Windows.
Stop cpulimit killer if armed by test, after the test is completed
