Mehtod HasIntersection added in NCollection_Map to check whether two given maps contain at least one same item.
'Draw' command and test to check the method were created.
The algorithm BRepExtrema_DistShapeShape has been protected against exceptions when non-geometric shape data is given on input, like a face containing triangulation only or an edge containing polygon only. Such faces/edges are ignored by the algorithm.
BRepGProps::VolumeProperties() now ignores faces without geometric surface to avoid access violation.
OpenGl_Workspace::BufferDump() now implicitly converts RGBA dump
into requested BGR, BGRA and RGB image.
DRAW command dversion is improved to report OpenGL variant used (desktop or ES); reporting of version of MSVC is corrected for VC14 and above; reporting of HAVE_OPENCL option is removed.
Usage of command vdump is corrected in some tests to specify extension .png for an image file.
Compiler warning is eliminated in OpenGl_Text.cxx (OpenGL ES mode only).
Check of the gap between ends of the p-curves having common vertex in the parametric space of face similar as in the class BRepCheck_Wire was added.
Check that face lies on the periodic surface was added.
Added check between ends of 2D curves in the 3D space and vertex the same which used in the BRepCheck_Wire::SelfIntersect
Test case for issue CR28094 has been created.
The whole piece of the walking line between two vertices is no more checked for having length greater than Precision::Confusion(). Instead, only full duplicate points (comparing with gp::Resolution()) are removed, allowing the resulting line have any non-null length.
The test bugs modalg_6 bug27720_5 has been reverted to its original state.
Exception is raised during translation BSpline curve having only one unique knot.
Protection for such case was added
Added protection against exception during reading BSpline curve with number of control points equal to 0
Added protection against exception due to using null binder during writing XDE document
Test case for issue #27575
OCAF attributes TDataStd_AsciiString, TDataStd_Integer, TDataStd_Name, TDataStd_Real are extended by possibility to use custom GUID.
Now multiple attributes of any of these types can be placed at the same label using different user-defined GUIDs.
For this new "Set" methods were added into each attribute, which takes this custom GUID as an argument.
Other aspects of management of attributes on labels remain the same.
Version number of persistent OCAF documents is incremented.
However, the attributes are stored in the same way unless non-standard GUID is used for particular attribute.
Previously saved documents are fully supported, but the new documents with this extension used will be non-readable by the previous version of OCAF libraries.
Problem of projection of line on the cone in the special case when starting point of the line coincides with the cone apex is fixed (by shifting this point along the source line).
1. BRepOffset_Inter3d::ConnexIntByInt
Create unique offset edge for each localized part shared between pair of faces of the input shape.
2. Test cases for the issue.
Extension on the 3D Offset algorithm (Mode="Complete", Join Type = "Intersection")
for colliding cases to add support for new configurations of the shapes.
In the previous approach the result of the offset operation was build from
the offset faces using MakerVolume algorithm, without checking of the validity of these faces.
The new extension is based on this approach, but now the offset faces are being checked
on invalidity and rebuild in case of any. This allows (in case of successful rebuilding) to avoid creation
of the unforeseen parts such as dangling parts, spikes, inverted faces in the result of offset operation.
The main criteria for the validity of the faces is the coincidence of the normal
direction of the offset face with the normal direction of the original face.
Check for removal of invalid faces has been removed as obsolete.
BRepOffset_Inter2D: Avoid excess trimming of the edges due to coincidence with other edges.
BRepOffset_Inter3D: Careful treatment of the intersection of the faces connected only through vertices.
Eliminating the compiler warning.
Small corrections of test cases for issue CR26917
When fuzzy option is in force prevent increasing tolerance of input shapes. Instead pass increased by fuzzy value the tolerances of sub-shapes everywhere where it is needed by intersection algorithms.
The following changes in API have been made:
- The methods SetFuzzyValue and FuzzyValue have been moved from the classes BOPAlgo_ArgumentAnalyzer, BOPAlgo_Builder, and BOPAlgo_PaveFiller to the base class BOPAlgo_Algo.
- The public method BOPDS_DS::VerticesOnIn has been renamed to SubShapesOnIn, and the new output parameter theCommonPB has been added.
- In BOPTools_AlgoTools, a new argument "theFuzzyValue" has been added in the methods ComputeVV and AreFacesSameDomain.
- In IntTools_Context, a new argument "theFuzzyValue" has been added in the methods ComputeVE and ComputeVF.
- The methods SetFuzzyValue and FuzzyValue have been added in the classes IntTools_EdgeEdge, IntTools_FaceFace.
- In the class IntTools_EdgeFace, the methods SetTolE, SetTolF, TolE, TolF have been removed, and the methods SetFuzzyValue, FuzzyValue have been added.
- The new argument "theTol" has been added in the method IntTools_WLineTool::DecompositionOfWLine.
Some improvements in algorithms have been made during fighting with regressions:
- Correct initialization of pave blocks for degenerated edges.
- In BOPAlgo_PaveFiller::MakeBlocks(), filter out paves on intersection curve that were put on the curve accidentally due to wide range of E-F intersection vertex.
- In the method IntTools_Tools::ComputeTolerance the margin added to the computed tolerance has been increased up to 0.001%.
- The method BOPAlgo_PaveFiller::PutPaveOnCurve has been corrected in order to use the original vertex tolerance instead of the value increased during putting it on other curves.
- The new method BOPDS_PaveBlock::RemoveExtPave has been added.
- The vertex tolerance computation in BOPTools_AlgoTools::CorrectCurveOnSurface has been improved, taking into account intersection segments between p-curves (to avoid regression on "bugs modalg_6 bug22794").
- Improve IsExistingPaveBlock to make more stable catching of coincidence of common block with section curve (against regression "bugs modalg_4 bug697_2" on Linux).
Test case for the bug has been added.
The following test cases have been updated as improvements:
boolean gdml_private ZH2 ZI7 ZJ7
boolean volumemaker C4
The test case bugs/modalg_4/pro19653 has been corrected to make it stable. See comment inside the script for details.
The test case bugs/modalg_6/bug25880 has been corrected to suppress wrong bfuse commands.
The test bugs/modalg_6/bug26954_3 has been corrected to compare the result with more precise reference value.
The "faulty" TODO in boolean/volumemaker/A8 has been made actual for Linux as well.
//Eliminate compilation error on Linux.
The shape after scaling contains PCurves with incorrect parametrization, because of too large tolerance given.
1. Set Precision::PConfution() as a tolerance for GeomLib::SameRange.
2. Do not take into account tolerances of vertices while calculating tolerance of transformed PCurve for edge.
3. Test case bugs/modalg_6/bug28028
Checking of number of knots is added. If number of knots more then allowed value, algorithm does not search distance between curves for each knot interval, but uses predefined sample point distribution.
This change was born in the scope of work on the issue 26329, but does not have direct connection to it. Therefore it has been postponed to be integrated later in its own context.
Test case for issue #28030
Purger has been disabled (in IntPatch_PrmPrmIntersection algorithm) if some points have been added in the Walking line (it is stupidly, first, to insert some points in the line and, after that, to delete points from this line).
Some improvements in IntWalk_PWalking::SeekPointOnBoundary(...) method have been made (see comments in the code for detail information).
Some test cases have been adjusted according to their new behavior.
The method BRepOffsetAPI_MakePipeShell::Generated now returns generated shapes for sub-edges and sub-vertices of sections.
The method BRepFill_PipeShell::BuildHistory is redesigned: now it builds generated shapes for sub-edges and sub-vertices of sections.
New Draw command "gensweep" is added to sweep commands for testing of history building.
Check for null shape has been added in the command addsweep implementation.
// eliminate warning
Test case for issue CR24932
Test case has been corrected.
- added implementation of mentioned methods for neutral point;
- sequence of detected objects was replaced by sequence of detected owner's indexes in AIS_InteractiveContext;
- commands vselnext and vselprev were corrected to update viewer properly;
- test case for issue #27530.
The algorithm in WorkWithBoundaries::BoundaryEstimation(...) did not take into account opposite directions of cylindrical axes (when the angle between them is obtuse). After the fix it does it.
Small correction of test cases for issue CR28009
The root of the problem is incorrect processing of cases when intersection line goes through the apex(es) of sphere. The fix improves this situation. The algorithm is taken from DecomposeResult(...) function (see IntPatch_ImpPrmIntersection.cxx file). Before the fix, faltering steps were done to solve this problem. As result, it worked in some particular cases. Now, its possibilities have been extended significantly.
Following changes have been made in the fix:
1. Class IntPatch_ALineToWLine has been rewritten cardinally. It touches as interfaces of existing methods as adding/removing some methods/fields. Correction touches both cases: going through seam of Cone/Sphere and through pole(s) of sphere. Old interface did not allow making some actions with analytical line (ALine), e.g. splitting it on several Walking-lines (WLine).
2. Restriction-line support has been removed from Implicit-Implicit intersection result (see IntPatch_Intersection::GeomGeomPerfom(...) method). It connects with the fact that the intersection algorithm itself returns precise intersection line in analytical cases (in compare with parametric intersector). Therefore, we do not need in additional (restriction) line.
3. New class IntPatch_SpecialPoints has been added. This class contains methods to add some special points (such as apex of cone, pole of sphere, point on surface boundary etc.) in intersection line (IntPatch_PointLine). It is based on the static functions, which already exist in IntPatch_ImpPrmIntersection.cxx file (these functions have been moved to the new class).
4. Method IntPatch_WLineTool::ExtendTwoWlinesToEachOther(...) has been renamed to IntPatch_WLineTool::ExtendTwoWLines(...). It is connected with changing main idea of the method. Now it allows extending WLine to the surface boundary or to the singular point (if it is possible): cone apex, sphere pole etc. Interface of this method has been corrected, too. At that, old functionality (extending to each other) has been kept. For implementation of this algorithm, new enumeration "IntPatchWT_WLsConnectionType" has been created.
5. Method IntPatch_PointLine::CurvatureRadiusOfIntersLine(...) has been added. See IntPatch_PointLine.hxx for detail information. It allows correct step computing depended on the local curvature of the intersection line. This method uses geometrical properties of intersected surfaces to compute local curvature. Therefore, it can be applied in wide range of cases even if the intersection curve is not represented in explicit form (e.g. in case of param-param-intersection).
6. Method IntSurf::SetPeriod(...) has been created.
7. Additional check has been added in Draft_Modification::Perform() method for better choice of correct fragment of intersection line for processing DRAFT operation.
8. New overload method IntPatch_Point::SetValue() has been added.
9. Some refactoring of the code has been made.
Creation of test case for issue #27431.
---------------------------------------------------------------------------------------------
Some test cases have been adjusted according to their new behavior.
tests\bugs\modalg_4\bug62
It is really IMPROVEMENT (but fortuitous).
tests\bugs\modalg_5\bug25838
The behavior of this test has been reverted to the state before fixing the issue #27341. Main problem has not been fixed in #27341. It was fortuitous improvement.
tests\bugs\moddata_2\bug565
Quality of intersection curve was not checked. And the curve is bad on both MASTER and FIX. Input data are really wrong: plane-like-cone. However, on the MASTER, four intersection curves (the quality is insignificant) are expected. On the fix, not empty intersection result is expected simply.
tests\boolean\volumemaker\A8
Differences in images and CPU is expected. Difference in images is expected to be fixed in the issue #26020. Now, we should apply this behavior.
Much CPU time is spent by IntTools_FaceFace::ComputeTolReached3d(...) and GeomInt_IntSS::BuildPCurves(...) methods calling. These methods are not touched by the algorithm. It is the result of change of intersection curve(s) form. However, the new Curve(s) seems to be valid and can be applied. As result, new behavior can be applied, too.
tests\boolean\volumemaker\F8
tests\boolean\volumemaker\F9
tests\boolean\volumemaker\G5
tests\boolean\volumemaker\G6
CPU difference is expected. Much CPU time is spent by IntPatch_PointLine::CurvatureRadiusOfIntersLine(...) method calling. This method is really new (it does not exist on the MASTER) and is really useful. Therefore, we should apply new behavior.
tests\boolean\volumemaker\G1
CPU difference is expected. Much CPU time is spent by IntTools_WLineTool::DecompositionOfWLine(...) and IntTools_FaceFace::ComputeTolReached3d(...) methods calling. These methods are not touched by the algorithm. It is the result of change of intersection curve(s) form. However, the new Curve(s) seems to be valid and can be applied. As result, new behavior can be applied, too.
tests\bugs\modalg_6\bug26619
Differences in images is expected. The test keeps its BAD status on the FIX. But the result on the fix is nearer to expected than on the MASTER. Issue #27014 is still actual. As before, it is not clear, why the number of entities is different. The number of section curves has not been changed. Interfered entities are the same as on the MASTER.
tests\bugs\modalg_5\bug25319_1(2)
The reason is described in the issue #27896.
Small correction in the test case
Implement new function to find Product_Definition_Shape entity.
Modify Reader to add possibility of import DGTs, connected to some geometry items.
Update test cases.
BRepGProps now ignores faces without geometric surface to avoid access violation.
BRepExtrema_DistShapeShape::DistanceMapMap() now skips comparison between void bounding boxes.
BRepBndLib::Add() now ignores useTriangulation flag for faces without geometric surfaces, and uses triangulation if any for updating of the box.
The SolidClassifier algorithm does not take into account the internal parts of the solid and its faces.
But in some cases the parts which are internal on some shapes can be included in other shapes of
the same solid with FORWARD/REVERSED orientation and therefore should be counted as well.
The fix changes the procedure of the initialization of the tree of bounding boxes of the edges and
vertices of the solid in SolidExplorer algorithm to treat the internal/external parts of the solid correctly.
Avoid getting non-existing array items. Use reference to array items instead of pointers where it is possible.
Create test case. Before the fix this test raised exception in debug mode.
Method WorkWithBoundaries::BoundaryEstimation(...) has been brought in balance with IsParallel(...) method, which checks if cylinder axes are parallel.
Added classes AIS_Animation, AIS_AnimationCamera, AIS_AnimationObjectLocatio.
Draw Harness command vanimation has been modified to manage animation timeline.
Command vfit has been extended with option -noupdate.
Formatting of vviewparams command output has been improved.
Functionality of commands vlocreset, vlocmove, vloctranslate, vlocrotate,
vlocmirror, vlocscale has been merged into vlocation/vsetlocation.
vlocation now can print the current local transformation of the object.
v3d/ivtk test group does not call vfit anymore.
Fixed misprint in test cases bugs/vis/bug24623_3 and bug25532.
