1. Protection against getting access to null-handle has been entered.
2. Function AreSamePoints() has been substituted by appropriate method IntSurf_PntOn2S::IsSame(...)
Test cases for issues #27262 and #27263 have been created.
1. Processing when IntPatch_WLine/IntPatch_RLine goes through the seam edge has been improved in DecomposeResult(...) function (see IntPatch_ImpPrmIntersection.cxx).
2. Incorrect initialization of last point of IntPatch_WLine/IntPatch_RLine has been eliminated. Earlier it was the reason of exception.
Creation of test case for this issue.
Adjusting some test cases according to their new behavior. Namely:
1) tests\bugs\modalg_4\bug825 (bug825_2)
Details are described in issue #25915. In short, new intersection algorithm works better than old (WLine without "jumping"). However, Boolean operation loses degenerated edges of the sphere. Consequently, we get the result with Not-closed face.
2) tests\bugs\modalg_6\bug26684_2
TolReached of intersection curve has become smaller. Consequently, intersection algorithm works better than earlier.
Calling IntPatch_WLineTool::ComputePurgedWLine() algorithm is forbidden if Walking-line is obtained from analytic line.
Creation of test case for this issue.
Method DownCast() is made template, to be available only when argument is actually a pointer or handle to a base class.
For compatibility with existing code, method DownCast() that can be used for the same type, derived, or unrelated class (i.e. where there is no actual down casting) is still available, its use shall cause "deprecated" compiler warning.
OCCT code is updated to remove meaningless DownCast()s; a few places where DownCast() was used with argument of unrelated type are corrected.
DRAW command QAHandleCast is removed (it was useful only during redesign of handles).
1. Step of Walking-line has been increased as possible and now computes by iteratively adaptive algorithm (every iteration checks if current step is too big/small and decreases/increases one).
2. Interface of IntWalk_PWalking class has been changed
2.1. Method MaxStep() has been added in order to know about maximal distance between 2D-points.
2.2. Method ComputePasInit(...) has been added in order to initial step value computation.
2.3. Fields myTolTang (tolerance for intersection algorithm) and myStepMin (minimal step value) have been added.
Correction of some test cases.
Creation test case for this issue.
Changes to eliminate compiler warnings.
1. Algorithm of Restriction line decomposition has been created.
2. Algorithm of check of coincidences between Walking and Restriction line has been improved in new function IsCoincide(...) (which replaces IsIn2DBox(...)).
3. Some useful methods have been added in IntPatch_PointLine (and inherited) classes.
Test cases for this issue have been created.
1. Intersection curve was not bounded by faces domain. It was the reason of big edge tolerance. This problem has been fixed.
2. Interface bopcurves DRAW-command has been changed in order to make possible to reproduce intersection problem.
Creation of test case for this issue.
This branch contains fixes for 26675 and 26431 bugs.
1. Normalization has been eliminated.
2. Interfaces of AppDef_Compute::Parametrization(...) and BRepAlgo_BooleanOperations::SetApproxParameters() methods have been changed.
3. Overloaded methods for ApproxInt_Approx::SetParameters(...), TopOpeBRepTool_GeomTool::GetTolerances(...) and TopOpeBRepTool_GeomTool::SetTolerances(...) have been removed (because some fields of these classes are not used more).
4. Comments for some methods have been changed in BRepApprox_TheMultiLineOfApprox.hxx and GeomInt_TheMultiLineOfWLApprox.hxx files.
5. Some fields have been deleted from ApproxInt_MultiLine class. Kept members have become constant.
6. Interface of ksection DRAW-command has been changed.
7. Now, 2dintersect DRAW-command prints information about found segments.
8. Some code fragments have been rewritten to make them easier.
9. Algorithm of splitting WLine, which goes through pole of sphere has been improved.
10. Improve approximation algorithm in order to it will compute correct 2D- and 3D-tangent at the end of bezier constraints (including case when curve goes through or finishes on singular points).
11. Interface of IntPatch_WLine::Dump(...) method has been corrected.
12. Some methods for working with Walking-line are made more universal (available for both GeomInt and IntTools packages).
13. Problem in BRepLib::SameParameter(...) method has been fixed (see corresponding comment).
14. Small correction in Draft package.
15. Any outputs in IntPatch_Intersection::Dump(...) method have become disabled because they are useless. If anybody need in this outputs he/she will correct this method himself/herself.
Adjusting some test cases according to their new behavior.
Creation of new test cases.
----------------------------------------------------------------------------------------------------------------------------
Some explanation of new behavior of some test cases:
1. Regressions:
a) blend simple X4
The problem is described in the issue #0026740. According to this description, the result on the current MASTER seems to be wrong indeed.
b) boolean bcommon_complex C7 and boolean bcut_complex Q1
These test case use same shapes with different Boolean operation (COMMON and CUT). They are already BAD (on the MASTER). Now, some sub-shapes have become not-shared, simply. In my opinion, we shall apply new behavior of these tests.
c) boolean bsection M3
The problem described in the issue #0026777 exists even on the current MASTER.
d) boolean bsection M9
The problem is described in the message http://tracker.dev.opencascade.org/view.php?id=26815#c47546. Here, we have really regression in the picture.
e) boolean bsection N2
The problem is described in issue #0026814.
f) boolean volumemaker G1
The problem is described in issue #26020.
g) bugs modalg_1 bug1255 (and bug1255_1)
The problem is described in issue #26815.
h) bugs modalg_2 bug5805_18, bugs modalg_2 bug5805_42, bugs modalg_2 bug5805_46
The problem is described in issue #25925.
i) bugs modalg_3 bug602
The problem is describes in issue #602.
j) bugs modalg_5 bug24915
The problem is described in the message http://tracker.dev.opencascade.org/view.php?id=25929#c48565. It is not fixed by this issue.
k) bugs modalg_5 bug25838
The main reason is described in issue #0026816.
----------------------------------------------------------------------------
2. Improvements:
a) boolean volumemaker F9
b) bugs modalg_1 bug10160_3
c) bugs modalg_2 bug22557
d) bugs modalg_5 bug25319_1 (_2)
e) draft angle G2
f) offset shape A1
g) offset with_intersect_80 N7
Check, if cylinder axes are parallel is made more carefully.
This check is brought to conformity with check if axes are parallel (see constructor AxeOperator::AxeOperator(...) in IntAna_QuadQuadGeo.cxx file)
Test case for issue CR26884
1. Algorithm of Restriction line processing has been improved in IntTools_FaceFace.cxx file.
2. Algorithm of checking, if Restriction line and Walking line are coincided has been improved in IntPatch_ImpPrmIntersection.cxx file.
3. Algorithm of extending check if starting point of Walking line is a tangent point has been added.
Small correction of some test cases.
Creation of test case for issue #0026699.
Small correction of test case for issue CR26699
The main reason of the bug is incorrect extending line in SeveralWlinesProcessing(...) function.
Additionally, interface of IntPatch_WLine::Dump(...) method has been changed.
Change some test cases according to their new behavior.
Test-case for issue #26621
I ComputePurgedWLine() function:
Excess points in walking line are deleted when:
1) Distance between neighboring points too small.
2) Points lie in one pipe without big jump on chord length.
III
Fixed problem with extremaPC with too close knot distribution to [minParam, maxParam] borders.
IV ApproxInt_Approx.gxx
New division criteria in intersection approximator.
III Test case
Test cases update to the new behavior.
Test case for CR21564
Correction of test cases for issue CR21564
1. JoinWLines algorithm has been improved.
2. Reference to the V-boundaries is deleted when computing step.
3. Decreasing the tolerance when computing parameters of WLine.
4. Adding boundary point is forbidden if it lies in prolongation of found ones.
5. Possible reason of exception has been eliminated.
6. Processing of critical point has been improved.
Test cases for this issue have been created.
Correction of some test case(s).
Test case bugs/modalg_6/bug26310_4 is added
Update of test-cases for issue #26310
Adaptations for compiling with GCC 4.7 and 4.8:
- Construction semantics is used for Handle objects being initialized by const Handle objects of derived type, to avoid overload resolution error in GCC 4.7.
- Missing includes added.
- Fixed bugs related to misuse of direct casts of handle.
- Eliminate CLang warnings on uninitialized and unused variables, functions, and expressions
Test commands for checking performance and functionality of OCCT handles and RTTI added.
New test case added for that: test perf fclasses handle.
Implementation of opencascade::handle improved to enable compile-time error if two handles of incompatible types are compared.
Comparison of handle to NULL is not possible any more; method IsNull() should be used instead.
Method LDOM_MemManager::Doc() is removed to avoid cyclic dependency of headers; constructor of LDOM_Document(LDOM_MemManager&) is used directly instead.
Inclusion of headers corrected for compilation after previous patch.
Automatic upgrade of OCCT code by command "occt_upgrade . -nocdl":
- WOK-generated header files from inc and sources from drv are moved to src
- CDL files removed
- All packages are converted to nocdlpack
Automatic update by command "occt_upgrade . -downcast"
C-style cast of Handle to that of derived type (now illegal) is replaced by call to DownCast()
Const reference local variables of Handle type initialized by result of DownCast are replaced by normal variables.
Missing headers added; includes of headers "Handle_...hxx" removed.
Misuses of macro Handle() and its use in typedefs corrected.
Alias classes Profile and Option are removed from IFSelect; ones defined in MoniTool are used directly.
Removed header files defining only Handle classes (except Image_PixMap_Handle.hxx)
Classes SelectMgr_BaseFrustum and now inherit Standard_Transient and can be manipulated by Handle (not NCollection_Handle)
Fixed reference-type local variable pointing to temporary object
Use of handle in conditional expressions and comparisons to NULL are replaced by call to method IsNull()
1. Conditions for adjusting and for breaking Walking-lines have been amended.
2. Processing of case when WLine should be broken has been changed.
Test cases for issues 26193 and 26208 have been added
Cosmetic correction of test-cases
Modification of test-case according to the new behavior.
1. B-spline cache was moved into separated classes: BSplCLib_Cache for 2D and 3D curves and BSplSLib_Cache for surfaces.
2. The cache is used now in corresponding adaptor classes (Geom2dAdaptor_Curve, GeomAdaptor_Curve and GeomAdaptor_Surface) when the curve or surface is a B-spline.
3. Algorithms were changed to use adaptors for B-spline calculations instead of curves or surfaces.
4. Precised calculation of derivatives of surface of revolution is implemented for the points of surface placed on the axis of revolution (Geom_SurfaceOfRevolution.cxx)
5. Small modifications are made to adjust algorithms to new behavior of B-spline calculation.
6. Test cases were modified according to the modern behavior.
7. Changes in BOPAlgo_WireSplitter, BOPTools_AlgoTools, BRepLib_CheckCurveOnSurface and ShapeAnalysis_Wire to use adaptors instead of geometric entities
8. Allow Geom2dAdaptor and GeomAdaptor in case of offset curve to use corresponding adaptor for basis curve
Modification of test-cases according to the new behavior.
1. Algorithm of aStepU1 computing was changed.
2. Interface to allow convert gp_XY(Z) to the math_Vector has been added.
3. Algorithm of point in V-boundaries computing has been changed.
4. Situation when intersection line walks along V-boundary of cylinder(s) is processed better.
5. Intersection lines are created with their individual step along U1 parameter.
6. Points processing has been moved to the assembly level.
7. Extend output of "bfuseblend" and "bcutblend" DRAW-command.
8. New option for "bfuseblend" and "bcutblend" command has been added.
Update Test cases
Test cases for issue CR25742
1. Restriction line is processed in IntTools_FaceFace with using methods of GeomInt_IntSS class.
2. Check, if Restriction- and Walking-lines (or Restriction-Restriction lines) are coincided, has been added in IntPatch_ImpPrmIntersection.cxx (at that RLine is considered to be isoline only).
3. Check, if RLine and GLine are coincided, has been added in IntPatch_ImpImpIntersection.cxx.
4. Create new class IntPatch_PointLine, which is inherited from IntPatch_Line.
5. The reason of exception (in DEBUG MODE) has been eliminated.
New test cases for issue #25416 were added.
tests/bugs/modalg_5/bug24650 was modified.
If Walking-lines are coincided we kept line, which contains more points or has more length (because it is more precisely, most likely).
Test cases for issue CR25828
Some test cases were changed
1. Algorithm of adjusting parameter to the surface boundaries has been changed.
2. Control First and Last parameters in BRepLib_CheckCurveOnSurface::Compute() function.
Test cases for issue CR25819
1. Curve boundaries were more precised.
2. Some test cases were changed in accordance of their new behavior.
3. Code fragment for WLines joining was moved to higher level (for more universal using in the future).
Code was changed in accordance with the last remark.
Added test cases bugs/modalg_5/bug25715_1 bug25715_2 bug25715_3
The empty copy constructor, assignemnts operator, default constructors added to the following classes:
The following classes use “new” function without Handles:
- Select3D_PointData
- BSB_T3Bits
- IntPatch_InfoPD
- LDOM_StringElem
- BinomAllocator
- ProjLib_OnSurface
- Standard_MMgrFactory
Useless declaration of default constructor have been deleted.
1. Dump of WLine is shown with more precise.
2. Equation solving with more precise.
3. Dump of Multy-line.
4. Code optimization.
Some test cases were updated in accordance with their new behaviour.
Correction of test cases for issue CR25531
1. Function IsSame(...) for IntSurf_PntOn2S was added (see IntSurf_PntOn2S.cdl for detail information).
2. Inserting additional points is forbidden if existing WLine contains only two points coincided.
Test-case for issue #25488
Macros ending on "DEB" are replaced by OCCT_DEBUG across OCCT code; new macros described in documentation.
Macros starting with DEB are changed to start with "OCCT_DEBUG_".
Some code cleaned.
1. DRAW-commands for curve/surface continuity returning were changed.
2. Output of "distmini" DRAW-command is amended.
3. Function MinMax() was moved from Standard_Real to IntPatch_ImpImpIntersection_4.gxx.
4. Incorrect computing of nbcurveC1 in Geom2dConvert::C0BSplineToC1BSplineCurve(...) function was liquidated.
Test cases were changed.
