For fix this case in method Geom2dInt_Geom2dCurveTool::NBSamples() number of samples for 2d offset and trimmed curve is computed as max value from number of samples for other curve and number of samples for basis curve.
Test case for issue CR24800
Modifications:
class IntTools_EdgeEdge
1. method
Standard_Boolean IntTools_EdgeEdge::FindParameters(
const BRepAdaptor_Curve& theB
const Standard_Real aT1,
const Standard_Real aT2,
const Standard_Real theRes,
const Standard_Real thePTol,
const Bnd_Box& theCBox,
Standard_Real& aTB1,
Standard_Real& aTB2)
Added protection for large values of parameters of the edges.
2. methods
static Standard_Boolean BndCommon(const Bnd_Box& theB1,
const Bnd_Box& theB2,
Bnd_Box& theBOut)
and
IntTools_EdgeEdge::FindSolutions()
have been removed as redundant.
Test case for issue CR24823
class IntTools_FaceFace
- statc function:
void CorrectSurfaceBoundaries(const TopoDS_Face& theFace,
const Standard_Real theTolerance,
Standard_Real& theumin,
Standard_Real& theumax,
Standard_Real& thevmin,
Standard_Real& thevmax)
The faces based on cylidrical surface has been added to the list of candidates to extend the boundaries
Test case for issue CR24851
MAIN CHANGES:
FixAddNaturalBound: the boundaries of "natural bound addition" are restricted: a face, that does not contains an outer wire, should not have any infinite UV boundaries due to new face building (with using a surface) requires specified UV boundaries.
FixAddNaturalBound: myResult is updated in FixAddNaturalBound when the method creates a new face with natural boundary. myResult is required to be updated for next "fix small-area wires" algorithm
IsPeriodicConicalLoop: incorrect working BRepTools_WireExplorer was replaced on TopoDS_Iterator.
a natural bound is added to all the faces are constructed with UV-periodical surfaces (not only sphere and torus; e.g., closed b-splines)
other:
ShapeAnalysis: ReverceSeq renamed to ReverseSeq
BRep_Tool Pnt and Tolerance has the check for null TShape
Test cases for issue CR24249
required null checks were added
test cases were corrected according to their new behavior
Correction test case for issue CR24249
Increased checking accuracy of endpoints touching of segments.
Code formatting improvement.
Test case for issue CR24775
Correction test case for issue CR24775
class BOPTest
class BOPAlgo_BOP
class BOPAlgo_Builder
class BOPTest
class BRepFeat_Builder
class BRepFeat_MakeCylindricalHole
The format of the command has been changed:
bbop r op [-s -t]
The following options has been added:
-s - run in serial mode
-t - print the CPU time
Test cases for issue CR24825
On attached shape command "bfillds -s" hangs in Test Harness on the long time. In debug mode exception is raised.
Vectors are normalized before calculation of an angle.
Added test case bugs/modalg_5/bug24809
DRAW command "vertex" was extended to create vertex from point.
DRAW command "extrema" was extended and unified: both extrema points are outputted to DRAW in case of too close points;
parameters of extremal points are outputted.
35 shapes were added for anti-regression tests.
Second DRAW test was created for bug CR23830.
Move shapes to shape-repository
AIS_Shape, ::SetColor(), ::SetMaterial(), ::SetTransparency(), ::SetWidth() - improve consistency.
Setup color for marker aspect as well.
vaspects - new command superseeds vsetcolor, vsetmaterial, vsettransparancy, vsetwidth
and their unset analogs. Improve syntax and arguments validation.
OpenGl_AspectMarker::SetAspect() - do not reset myMarkerSize when sprite is unchanged.
Extend NCollection_IndexedDataMap - Iterator::Key() and FindFromKey() with value copying.
Add test case bugs vis bug24762_coloredshape.
class BOPAlgo_ArgumentAnalyzer
- method:
void BOPAlgo_ArgumentAnalyzer::TestSelfInterferences()
The new shapes has been excluded from the treatment
void BOPAlgo_CheckerSI::PostTreat()
The new shapes has been excluded from the treatment
Standard_Integer bopcheck
(Draw_Interpretor& di, Standard_Integer n, const char** a )
The new shapes has been excluded from the treatment.
The interferences of the type */Solid has been included in the treatment.
Test case for issue CR24764
Added new static method PointBoxDistance() to compute distance between point and bounding box.
Removed method IntTools_EdgeEdge::FindRoughRanges().
Test cases for issue CR24751
Two scripts added:
samples/tcl/drill.tcl: creates model of a twist drill bit
samples/tcl/cutter.tcl: creates simplified model of a milling cutter
Added test cases bugs/modalg_5/bug24758_1 bug24758_2
Fix of the persistence bug (exception with message "Persistant CurveRep is Null").
Creating new draw command for testing CR24565
Revert license header corruption
Correction for new draw command OCC24565
Test case for issue CR24565
- bugs modalg_5 bug23954 - Added test case for issue 23954
- bugs modalg_1 bug60776_1 - Corrected square of shape and deleted appropriate TODO
- bugs moddata_1 bug13 - Added check for the curve length obtained as a result of intersection
- feat featprism S2 - Corrected square of shape and deleted appropriate TODO
Performance improvements in IntTools_EdgeEdge algorithm:
1. Added check for common box between edges: if common box between edges is thin,
find exact solutions at once, without looking for rough ranges first;
2. Improved methods IntTools_EdgeEdge::FindBestSolution() and
IntTools_EdgeEdge::CheckCoincidence(...) by using method SplitRangeOnSegments
with resolution of the curve as a criteria for size of the ranges.
Test cases for issue CR24696
Part 1: Speed up of import functionality.
Correction in ShapeFix_IntersectionTool::FixIntersectingWires() - preliminary construction of ShapeAnalysis_Surface tool for the whole face; computation of 2d bounding boxes for edges and wires before intersection checking.
Part 2: Speed up of check shape.
Correction in BRepCheck_Face::IntersectWires() in the same way: preliminary computation of 2d boxes for edges and wires in order to reduce the number of calls of intersection tool for pair of wires.
Test cases for issue CR24596
From now on, the panning behavior of V3d_View completely corresponds to equal operations with camera. There is no more confusing "Center" property and "ProjectionShift" which were used to introduce composite panning, while respecting view referential points: At, Eye unchanged. The V3d_View::FitAll approach has been rewritten to do "fit all" geometrically, operating with frustum, to make it working for both orthographic and perspective projections.
1) Getting rid of ProjectionShift and Center property:
- Removed ProjectionShift property of Graphic3d_Camera.
- Removed confusing Center property of V3d_View (related to projection shift).
- Removed redundant code related to the Center property of V3d_View.
- Removed WindowLimit method of Graphic3d_Camera - no more used.
2) Improvements of fit all and selector:
- Improved FitAll operation of V3d_View and reused it in NIS_View - the perspective projection is now handled correctly.
- Revised code of Select3D_Projector class - can be defined with any given projection and model-view matrices.
- Modified StdSelect_ViewerSelector3d and ensured that panning, zooming and going into the view do not lead to unwanted re-projection of sensitives. The handling of perspective selection is revised.
- Take into account graphical boundaries of infinite structure on ZFitAll.
3) Improvements of camera:
- Introduced new z range scale parameter for V3d_View::AutoZFit. See, V3d_View::AutoZFitMode.
- Allow negative ZNear, ZFar for orthographic camera to avoid clipping of viewed model.
- Moved camera ZNear, ZFar validity checks to V3d_View level.
- Use more meaningful Standard_ShortReal relative precision for ZNear, ZFar ranges computed by ZFitAll.
- Use Standard_Real type for camera projection and orientation matrices.
- Extended camera to generate both Standard_Real and Standard_ShortReal transformation matrices using the same matrix evaluation methods and converted input parameters.
Correcting picking tests for perspective view
Modify v3d face test cases for 1px changes in face picking
Modified test cases for new arguments of vviewparams DRAWEXE command
Edge/Edge Interferences
Changes:
1. class BOPAlgo_PaveFiller
- method:
void BOPAlgo_PaveFiller::PerformEE()
the chages provides the parallel computations of
Edge/Edge interferences.
- auxiliary classes:
BOPAlgo_EdgeEdge
BOPAlgo_EdgeEdgeFunctor
BOPAlgo_EdgeEdgeCnt
have been added.
The classes are auxiliary classes to provide the parallel computations
of Edge/Edge interferences.
2. class BOPTest
-method:
void BOPTest::PartitionCommands(Draw_Interpretor& theCommands)
- static function:
Standard_Integer bfillds(Draw_Interpretor& di,
Standard_Integer n,
const char** a)
The syntax of the command "bfillds" has been changed.
> bfillds [-s -t]
options:
-s - launch the algorithm in sequential mode
-t - display CPU time
Test case for issue CR24639
The map for collecting pave blocks of two faces has been replaced with indexed map
to ensure the constant order of pave blocks when checking section curves for existents.
Test case for issue CR24628
Main changes are in "IntWalk_IWalking::TestDeflection(...)" function (IntWalk_IWalking_5.gxx).
Some test cases were corrected according to their new behavior.
