Problem: From the point of view of the STEP format (and others), it is allowed
to describe a face on a surface with natural boundaries (torus, sphere) without
specifying these boundaries. Thus, a face on a closed surface and containing
an inner wire (or several) is correctly defined and describes a face with a
cutout defined by this wire. At the same time, there is a function
(ShapeFix_Face::FixOrientation) in the ShapeHealing procedure that corrects the
orientation of the wires, and it starts before the function of adding natural
boundaries (ShapeFix_Face::FixAddNaturalBound). There are many shapes that have
incorrectly oriented wires and this procedure successfully heals them, but on a
correctly specified face with single inner wire on closed surface, we do not get
the entire surface with a cutout, but a part of the surface defined by the wire.
This fix is intended to resolve this ambiguity.
Change:
1. Added function isNeedAddNaturalBound that returns TRUE if face needs to add
natural bounds.
2. Corrected condition in FixOrientation to ignoring faces that needs to add
natural bounds.
3. For tests in which one wire was incorrectly oriented on a closed surface,
flag AddNaturalBound was disabled.
5. Test with cutout from torus was created: bugs step bug28414.
Result: By default, it is correct to add natural boundaries, because this case
is correct from the point of view of the STEP format and others.
Possibility for adding LengthUnit info to XCAF document using special class XCAFDoc_LenghtUnit and XCAFDoc_LenghtUnitTool is implemented.
Package UnitsMethods is split: geom methods were placed to new file GeomConvert_Units which is in the toolkit TKXSBase, internal step scale factors was placed to StepData.
Updated UnitMethods to convert scale factor to different unit types.
Now, XSAlgo::XSAlgo_AlgoContainer is used to update unit info from static interface values.
New Draw command "XSetLengthUnit" and "XGetLengthUnit" for set or get XDE attribute.
Upgraded tests for STEP, IGES, OBJ, glTF, VRML formats to check area regressing with used unit.
Upgraded tests\de test cases to use any units in the "loop back" algorithms.
In the result of translation one face lying on the spherical surface converted to the two separate faces due to method IsSurfaceUVPeriodic returned false for spherical surface.
Now method IsSurfaceUVPeriodic returns true for spherical surface in order to natural bounds can be added for spherical surface too.
Method ShapeFix_Face::FixOrientation was corrected to avoid reversing inner wire for case when spherical face has only one inner bound without outer bound.
Check that wire has bounding box equal to bounding box of surface was added in the method ShapeFix_Face::FixAddNaturalBound in order to avoid addition of the natural bounds ( test bugs xde bug22535_2 1 for face 2 lying on the torus)
In order to avoid regressions fix for translation "VERTEX_LOOP" entities was added. Natural bounds for "VERTEX_LOOP" lying on the Spherical and BSpline surface is added only if face does not have any other bounds.
In other case natural bounds were added during ShapeFix operation after translation in order take into account mutual position of the all bounds in the UV space of the face.
The table of named colors has been compressed and moved out
from Quantity_Color.cxx into Quantity_ColorTable.pxx.
Quantity_NameOfColor - grayscale enumeration values have been re-ordered to fix discontinuity.
Duplicating colors has been merged within enumeration:
CHARTREUSE=CHARTREUSE1, GOLD=GOLD1, GREEN=GREEN1, ORANGE=ORANGE1,
ORANGERED=ORANGERED1, RED=RED1, TOMATO=TOMATO1, YELLOW=YELLOW1.
Added aliases to several other common colors:
BLUE=BLUE1, CYAN=CYAN1, LIGHTCYAN=LIGHTCYAN1, MAGENTA=MAGENTA1.
Quantity_Color class definition has been cleaned to follow OCCT coding style.
Quantity_Color now stores NCollection_Vec3<float> as class field instead of separate components.
Removed unused class Quantity_ColorDefinitionError.
New methods Quantity_Color::Convert_LinearRGB_To_sRGB() and Quantity_Color::Convert_sRGB_To_LinearRGB()
converting RGB components from linear to non-linear sRGB colorspace and vice versa.
Image_PixMap::PixelColor() and Image_PixMap::SetPixelColor() methods have been extended
with an optional argument for performing linearization/delinearization of 8-bit sRGB pixel formats.
Draw Harness command AISColor has been corrected to take color name instead of enumeration index.
Special treatment of bspline curve of first degree is implemented in Extrema_GExtPC.gxx
Test case is added
Some test cases are modified according to actual state of algorithm
Now roots-references in XCAF Document can be exported to STEP without losing structure of assembly/sharing/metadata of this root. New auxiliary root assembly with each root-reference is created to save all necessary data.
Detection of specific case of error in the definition of transformation matrix describing position of the component within assembly, when it has Axis Placements swapped, is corrected to handle the case when one of these Axis Placements is contained in both Shape Representations (of the assembly and its component).
This allows the problematic STEP file to be translated correctly.
Added test bugs step bug30087
Name of the PROPERTY_DEFINITION entity for validation properties is changed to "geometric validation property" according to the current version of the recommended practices.
For compatibility with older definitions (with underscores) the check is made using string with underscores replaced by spaces.
The "end" file from folder "de" has been corrected to exclude comparing the number of edges in the shapes from current result with test data.
"TODO messages generated for differences were removed.
Data exchange tests were regenerated.
Check for double solutions has been added in algorithms Extrema_ELPCOfLocateExtPC and Extrema_ELPCOfLocateExtPC2d
that find extrema between point and curve.
Test parse rules are improved to recognize messages with word 'fail' or 'failure' as errors.
Test cases are corrected accordingly (TODO or REQUIRED statements added where fail messages were not noticed previously).
Subdivision of curve parametric interval based on deflection criteria is added for curve type OtherCurve in
Extrema_GExtPC.gxx. Algorithm of subdivision is implemented in Extrema_Curve(2d)Tool.cxx
New Draw command projpcurve for projection of point on CurveOnSurface is added in SWDRAW_ShapeAnalysis.cxx
projpcurve is modified to reflect "start parameter" in usage message and Draw help.
Exception is raised during translation BSpline curve having only one unique knot.
Protection for such case was added
Added protection against exception during reading BSpline curve with number of control points equal to 0
Added protection against exception due to using null binder during writing XDE document
Test case for issue #27575
Upgrade check of closeness of 2dcurve to line during projection:
For C1 and more surfaces check distance to normal, not to surface, for C0 surfaces update tolerance formula.
Add check for possible period jump in some inner point.
Update some test cases.
Add cache saving for lines,
update fixPeriodicTroubles() function, using parameters from cashe.
Small correction of test cases for issue #26930
fix processing of points from cache.
Update of test cases according to the new behavior
Fix behavior of fixPeriodicityTroubles() on different isolines,
fix copy/paste mistake.
Update test cases:
iges_2 C4 - return to master values
step_3 E6 - improvement.
Algorithm of computation of safe shift value along 2D-line (in order to distance between two points was less than tolerance) has been improved.
Correction of some test cases in accordance with their new behavior.
Test-case for issue #26642
Small correction of test-case
Small correction of test-case bugs heal bug26642
C2 continuity intervals changed to Knots intervals in case of Bspline curve.
Fixed incorrect extremaPC usage.
Test case for issue CR26351
Update of test-cases according to the new behavior
In method Approx_SameParameter::Build() for case when 2D and 3D curves is not same parameter calculation of maximal deviation is modified by following way :
Projection is considered as done only if parameter projected point falls within the current interval of parameters.
In the Approx_SameParameter considering tolerance after static method ProjectPointOnCurve was added.
In BRepAlgoAPI_Sewing catch of exception was added and computation of tolerance of edge if same parameter was changed in according to check in BRepCheck_Analyzer
In method Approx_SameParameter::Build() for case when 2D and 3D curves is not same parameter calculation of maximal deviation is modified by following way :
Modification in order to avoid warning
Test case for issue CR24357
1. B-spline cache was moved into separated classes: BSplCLib_Cache for 2D and 3D curves and BSplSLib_Cache for surfaces.
2. The cache is used now in corresponding adaptor classes (Geom2dAdaptor_Curve, GeomAdaptor_Curve and GeomAdaptor_Surface) when the curve or surface is a B-spline.
3. Algorithms were changed to use adaptors for B-spline calculations instead of curves or surfaces.
4. Precised calculation of derivatives of surface of revolution is implemented for the points of surface placed on the axis of revolution (Geom_SurfaceOfRevolution.cxx)
5. Small modifications are made to adjust algorithms to new behavior of B-spline calculation.
6. Test cases were modified according to the modern behavior.
7. Changes in BOPAlgo_WireSplitter, BOPTools_AlgoTools, BRepLib_CheckCurveOnSurface and ShapeAnalysis_Wire to use adaptors instead of geometric entities
8. Allow Geom2dAdaptor and GeomAdaptor in case of offset curve to use corresponding adaptor for basis curve
Modification of test-cases according to the new behavior.
Precision used to consider B-Spline knots identical is restricted to be not less than Precision::PConfusion() in Geom2d_BSplineCurve::Segment().
Affected tests updated (improvements)
Test case for issue CR25971
1. Unification of the polygons creation (it is regardless of arguments order).
2. Output of 2dintersect DRAW-command was changed.
3. Geom2dGcc_Circ2d2TanRadGeo.cxx:
Precise intersection point found by Extrema Curve-Curve method (dot product between every tangent vector and vector between points on two curves must be equal to zero).
4. Some comments have been translated from French to English.
Some test case have been updated.
Changes in accordance with the last remark
Test case for issue CR25593
Usage of Projlib added in case of uneven points distribution.
Test cases are updated to the new behavior.
Test cases for issue CR17129
Correction of test case for issue CR17129
1) Try-catch block was added on a StepToTopoDS_TranslateEdgeLoop::Init() to
catch Standard_ConstructionError during the Curve conversion.
2) Checks of BSpline curve degree added to prevent construction error when converting edges to BSpline_Curve.
3) Warning message was added in case of incorrect curve definition.
Correct of the test cases according to the new error message added with fix
Conflicts:
tests/de/step_1/R9
Modified test cases according to new reference data
Interface_CheckTool does not reset the Check added to CheckList now.
Added test case bugs/xde/bug25176
Update reference data in test cases.
Resolving conflicts:
tests/de/iges_3/A4
tests/de/step_1/R7
tests/de/step_2/H1
Check whether p-curve being projected can be approximated by straight line is made before full-scale projection, to improve performance.
If straight, pcurve is created as Line only if this will lead to the same range parameterization as 3d curve, otherwise BSpline of degree 1 is created.
Re-approximation of line pcurves by bsplines removed from ShapeFix_Edge.
Test case updating to new behavior.
Added "static" keyword to the fixPeriodictyTroubles() function.
Update of test-cases according new behavior
1. DRAW-commands for curve/surface continuity returning were changed.
2. Output of "distmini" DRAW-command is amended.
3. Function MinMax() was moved from Standard_Real to IntPatch_ImpImpIntersection_4.gxx.
4. Incorrect computing of nbcurveC1 in Geom2dConvert::C0BSplineToC1BSplineCurve(...) function was liquidated.
Test cases were changed.
Method STEPConstruct_Styles::LoadStyles() now imports StepVisual_StyledItem entities even if they was defined without StepVisual_MechanicalDesignGeometricPresentationRepresentation or StepVisual_DraughtingModel entity
Update of reference data
fix the notched edges twice per face - before checking for missing seam and after
Test case correction for issue CR24983
Add check for invalid Surface of linear extrusion (with basis curve - line and extrusion direction parallel to this line) during converting STEP surface
Small corrections of test cases for issue CR24983
MAIN CHANGES:
FixAddNaturalBound: the boundaries of "natural bound addition" are restricted: a face, that does not contains an outer wire, should not have any infinite UV boundaries due to new face building (with using a surface) requires specified UV boundaries.
FixAddNaturalBound: myResult is updated in FixAddNaturalBound when the method creates a new face with natural boundary. myResult is required to be updated for next "fix small-area wires" algorithm
IsPeriodicConicalLoop: incorrect working BRepTools_WireExplorer was replaced on TopoDS_Iterator.
a natural bound is added to all the faces are constructed with UV-periodical surfaces (not only sphere and torus; e.g., closed b-splines)
other:
ShapeAnalysis: ReverceSeq renamed to ReverseSeq
BRep_Tool Pnt and Tolerance has the check for null TShape
Test cases for issue CR24249
required null checks were added
test cases were corrected according to their new behavior
Correction test case for issue CR24249
Refactoring on current master fix for bug 0024008: ShapeAnalysis_Surface causes exception in Geom_OffsetSurface.
And modified test scripts in order to avoid report regressions
Test cases for issue CR24008
Added treatment of the vertex as a single object.
Added test case bugs/modalg_5/bug24060
Modified shape's extension in test cases bugs/moddata_3/bug23943_3 bug23943_4
Modified test cases in group de according to new reference data in issue 24035
asymmetrical check in Standard_Boolean IntCurve_IntPolyPolyGen::findIntersect was changed to symmetrical.
fix wrong calculation of approx parameter on curve for last polygon segment
Added test case bugs/modalg_5/bug24035
Modified TODO in "de" test cases because there are small differences with old behaviour
Modified test case heal/split_closed_faces/G5 because of corrections in intersector's behavior, which lead to changes in checkshape
Loop back tests for iges and step files with possibility of generation of reference data.
Clean up of test scripts (removal of obsolete code, adding comments, corrected formatting)
two fixes were done (same like bug 23722 and bug 23736)
Cancelling checking for number of warnings
rewrite some test scripts in cause of this and fix 23794
Tolerance checking was weakened.
Fix to check instability on Linux (bug 23822) was added.
TODO messages was added to tests which have different results on Windows and Mandriva2010
Ability to update this TODO in regeneration mode was added.
Add fix to bug 23852
Test groups were recomposed.
'dataexch' was renamed to 'de'.
CPU limit was decreased from 2000 sec. to 1500 sec.
