Problem: Desynchronization of behaviors of GeomAdaptor_Curve::NbIntervals and
GeomAdaptor_Curve::Intervals functions. First calculates number of intervals, then
array is created and second fills the array. In some cases the size of array
is less than need for filling.
Change:
1. Added function BSplCLib::Intervals that calculates number of interval and fills
the array with its (if needed).
2. Simplified the algorithm of intervals calculation.
3. GeomAdaptor_Curve::NbIntervals/Intervals and Geom2dAdaptor_Curve::NbIntervals/Intervals
use BSplCLib::Intervals.
4. When creating an adapter for the base curve, the boundaries of the adapter for the offset curve are applied.
5. Test for problem shape was created: bugs modalg_8 bug33187.
Result: The new approach eliminates the problem of writing outside the array bounds.
Fixed GeomAdaptor_Curve::LocalContinuity() for periodic curves.
Fixed GeomAdaptor_Curve::NbIntervals() for periodic curves.
Fixed GeomAdaptor_Curve::Intervals() for periodic curves.
Improved definition of length in tests.
Update Geom2dAdaptor_Curve to the same behavior.
Provide ShallowCopy() functions for adapters & evaluators of curves, 2d curves and surfaces. This will allow using copies of the same adapter in multi-thread calculations.
Adaptor2d_Curve2d, Adaptor3d_Curve and Adaptor3d_Surface now inherit Standard_Transient.
Interfaces Adaptor2d_HCurve2d, Adaptor3d_HCurve, Adaptor3d_HSurface and their subclasses
are now aliases to Adaptor2d_Curve2d, Adaptor3d_Curve and Adaptor3d_Surface.
Removed numerous unsafe reinterpret casts.
Generic classes Adaptor3d_GenHCurve, Adaptor3d_GenHSurface, Adaptor2d_GenHCurve2d have been removed.
Several redundant .lxx files have been merged into .hxx.
Removed obsolete adaptor classes with H suffix.
Approx/Approx_SameParameter.cxx,hxx:
Class Approx_SameParameter refactoring. Logic is changed in many places to unify usage, simplify maintenance.
Method Curve2d() is changed to return Geom2d_Curve instead of Geom2d_BSplineCurve. Corresponding message is added to the upgrade guide.
.lxx file is merged into .hxx.
Tangent computation is extracted into special method.
Comparing number of sample points after CheckSameParameter(...) is added to define cases with projection fails.
Undesirable behavior when curves are not same parameterized is fixed.
Geom2dAdaptor/Geom2dAdaptor.cxx: treatment of offset curve is added
Adaptor3d/Adaptor3d_TopolTool.cxx: minor improvement of performance for BSpline surfaces with huge number of knots
Tests were modified according to new behavior of sameparameter algorithm
StdPrs_ToolRFace no skips curves with NULL curves.
Code has been cleaned up from duplicated checks, redundant casts
and dummy Adaptor2d_Curve2dPtr typedef.
StdSelect_BRepSelectionTool::GetSensitiveForFace() now catches
Standard_NullObject exception to skip invalid Edges.
Implementation of classes BSplCLib_Cache and BSplSLib_Cache is revised:
- Common functionality dealing with spans along one parametric direction is separated to new struct BSplCLib_CacheParams
- Empty constructors are removed; copying is prohibited
- Code reconsidering degree and other parameters on each call to BuildCache() is eliminated; curve parameters must be the same in constructor and all calls to BuildCache()
- Extra call to BuildCache() from constructor is eliminated
The main reason of the regression is that the Extrema algorithm finds the truth extrema point but cannot adjust it to the range of given circle. It is connected with the fact that Geom(2d)Adaptor_Curve::IsPeriodic() method returns false for given circle because adaptor contains a piece of the circle which is not closed.
New algorithm of IsPeriodic() method will return the information about periodicity of the curve itself (independently of first and last parameter of adaptor).
The documentation about Geom(2d)_TrimmedCurve and Geom_RectangularTrimmedSurface has been updated in frame of the information about IsPeriodic-methods.
Macro NO_CXX_EXCEPTION was removed from code.
Method Raise() was replaced by explicit throw statement.
Method Standard_Failure::Caught() was replaced by normal C++mechanism of exception transfer.
Method Standard_Failure::Caught() is deprecated now.
Eliminated empty constructors.
Updated samples.
Eliminate empty method ChangeValue from NCollection_Map class.
Removed not operable methods from NCollection classes.
1) BRepMesh_FastDiscretFace.cxx:
- exclude planes from procedure of inserting internal points.
- localize declaration of the container aNewVertices in each method where it is needed.
- correct the logic of the method insertInternalVerticesOther, so that to separate the processes of removing extra points and addition of new points in different cycles, thus making the code more clear and in addition stable.
- insert useful output of intermediate mesh to a file in control() method for debug purposes (with definition DEBUG_MESH).
2) Add global functions MeshTest_DrawTriangles and MeshTest_DrawLinks to draw mesh data in debug session.
3) BRepMesh_FastDiscret:
- in the method Add calculations of deflections have been simplified for non-relative mode.
- replace the attribute MinDist with Deflection in EdgeAttributes structure. Correct its computation so that later to store this value as deflection of the polygon.
4) Make protection against exception in the method BRepMesh_Delaun::addTriangle() when an added triangle creates a third connection of a mesh edge.
5) BRepMesh_EdgeTessellator.cxx, BRepMesh_EdgeTessellationExtractor.cxx: use Geom2dAdaptor_Curve in order to use b-spline cache while computing value on a curve.
6) In BndLib_Box2dCurve::PerformBSpline, avoid creating new b-spline in case of requested parameter range differ from natural bounds insignificantly.
7) In GeomAdaptor classes, postpone building of cache till the time of its actual usage. So, creation of an adapter to compute intervals of continuity does not lead to creation of internal cache.
8) In the methods BRepAdaptor_Curve::Bezier and BSpline do not call Transformed() if transformation is identity.
9) In the classes Geom_BSplineCurve, Geom_BSplineSurface, Geom_BezierCurve, Geom_BezierSurface, Geom2d_BSplineCurve, Geom2d_BezierCurve change the method Pole() to return the point by const reference.
10) In CPnts_AbscissaPoint.cxx, compute derivative by D1 instead of DN to make use of b-spline cache.
11) Change test cases to actual state:
- Number of triangles/nodes can grow due to more accurate work with deflection of edges. Now the edge is tessellated using its own tolerance instead of maximal tolerance of all shapes in the face.
- Accept new numbers of mesh errors (free links, free nodes) for really bad shapes.
- Correct the test "bugs/mesh/bug25612" to produce stable result.
- Disable redundant checks in test cases bug25378* (lower limit for computation time).
- Speed up iso-lines computation for offset of bspline surfaces. For that use adaptor instead of original surface in evaluator of approximation.
- Add output of polylines for debug of insertInternalVerticesOther().
Reference data in test case bugs\moddata_2\bug453_3 have been changed to be close to expected theoretical values. This makes the test give stable result on different platforms.
- removal of excess interferences in case of simple hiding face
- correct processing of boundary edges coinciding with outlines
- change of API for testing Draw Command
- correction of Draw command "build3d"
- test cases are added.
Linux reference data is changed.
Partially fixed 0027340: Insufficient exact HLR speed
Number of samples in PolyPoly intersection algorithm tuned in each instance of generic class.
Default number of the samples in Geom2dAdaptor is changed according to the Adaptor2d_Curve2d class.
Minimal number of points in case of B-Spline is changed.
Minimal number of samples support is added in intersection algorithms.
1. Disable recalculation of B-spline cache when the parameter is out of surface boundary but near the cached span.
2. Rebuild cache each time a curve/surface is loaded into adaptor (B-spline knots may be re-parametrized outside adaptor without changing base curve)
3. Test cases.
1. Implemented evaluators for 2D and 3D offset curves
2. Removed obsolete namespace CSLib_Offset
Update of UDLIST (adding no-cdl-pack Geom2dEvaluator)
Update TKG2d/CMakeLists.txt after rebase
Correction compilation in debug mode
1. Remove cache from Geom_BezierCurve, Geom2d_BezierCurve and Geom_BezierSurface
2. Add cache for Bezier curves into GeomAdaptor_Curve, Geom2dAdaptor_Curve and GeomAdaptor_Surface
3. Update comments in corresponding cache classes
4. Avoid frequent down-casting to B-splines in adaptors
Automatic upgrade of OCCT code by command "occt_upgrade . -nocdl":
- WOK-generated header files from inc and sources from drv are moved to src
- CDL files removed
- All packages are converted to nocdlpack
Automatic update by command "occt_upgrade . -downcast"
C-style cast of Handle to that of derived type (now illegal) is replaced by call to DownCast()
Const reference local variables of Handle type initialized by result of DownCast are replaced by normal variables.
1. B-spline cache was moved into separated classes: BSplCLib_Cache for 2D and 3D curves and BSplSLib_Cache for surfaces.
2. The cache is used now in corresponding adaptor classes (Geom2dAdaptor_Curve, GeomAdaptor_Curve and GeomAdaptor_Surface) when the curve or surface is a B-spline.
3. Algorithms were changed to use adaptors for B-spline calculations instead of curves or surfaces.
4. Precised calculation of derivatives of surface of revolution is implemented for the points of surface placed on the axis of revolution (Geom_SurfaceOfRevolution.cxx)
5. Small modifications are made to adjust algorithms to new behavior of B-spline calculation.
6. Test cases were modified according to the modern behavior.
7. Changes in BOPAlgo_WireSplitter, BOPTools_AlgoTools, BRepLib_CheckCurveOnSurface and ShapeAnalysis_Wire to use adaptors instead of geometric entities
8. Allow Geom2dAdaptor and GeomAdaptor in case of offset curve to use corresponding adaptor for basis curve
Modification of test-cases according to the new behavior.
The constructors of classes from following files have been fixed to ensure that all non-static fields are initialized:
Adaptor2d_Line2d.cxx
Adaptor3d_IsoCurve.cxx
Adaptor3d_OffsetCurve.cxx
AdvApp2Var_ApproxAFunc2Var.cxx
AIS_Dimension.cxx
AIS_InteractiveContext.cxx
Aspect_DisplayConnection.cxx
BiTgte_CurveOnEdge.cxx
BiTgte_CurveOnVertex.cxx
BRepAdaptor_CompCurve.cxx
BRepMesh_Circle.hxx
BRepMesh_Delaun.cxx
BRepToIGES_BREntity.cxx
ChFi2d_AnaFilletAlgo.cxx
ChFi2d_ChamferAPI.cxx
ChFi2d_FilletAlgo.cxx
ChFi2d_FilletAlgo.hxx
Extrema_ExtPExtS.cxx
Font_FTFont.cxx
GccEnt_QualifiedCirc.cxx
Geom2dAdaptor_Curve.cxx
IGESData_IGESEntity.cxx
IGESData_DefSwitch.cxx
IGESToBRep_CurveAndSurface.cxx
LDOM_XmlReader.cxx
math_TrigonometricFunctionRoots.cxx
NCollection_ListNode.hxx
ProjLib_CompProjectedCurve.cxx
ProjLib_ComputeApproxOnPolarSurface.cxx
Select3D_Box2d.hxx
Select3D_PointData.hxx
Sometimes curve or surface, which is defined as C0, has continuity G1 or above. Offset can be built from these shapes.
Therefore, this extended checking was added into SetBasisCurve and SetBasisSurface methods.
Main changes in function BRepOffset_Tool::ExtentFace(...):
* "return" is added if intersection (in 2D-space) between two edges in a face cannot be found.
Basis curve/surface continuity value found (if G1-checking is OK) is set up as BasisContinuity (see myBasisCurveContinuity and myBasisSurfContinuity members which is returned by GetBasisCurveContinuity and GetBasisSurfContinuity() methods). This fact is used in Geom2dAdaptor and in GeomAdaptor classes.
Possibility is entered, which allows for basis elements of offset curve/surface to avoid of C0-checking.
Test cases were changed according to their new behavior.
Test-cases for issue #25124
Mostly duplicated comments were removed and missing ones were moved
into dedicated class CDL files.
Some more duplicated comments were removed from CDL files.
Correction of merge
Redundant keyword 'mutable' removed in CDL files.
In IGESConvGeom_GeomBuilder, unused methods MakeXY() and MakeXYZ() removed.
Method StepAP214_AutoDesignGroupAssignment::Init() replicating same method of the base class is removed as it causes CDL extraction error after above (seemingly irrelevant) changes.
For fix this case in method Geom2dInt_Geom2dCurveTool::NBSamples() number of samples for 2d offset and trimmed curve is computed as max value from number of samples for other curve and number of samples for basis curve.
Test case for issue CR24800
License statement text corrected; compiler warnings caused by Bison 2.41 disabled for MSVC; a few other compiler warnings on 54-bit Windows eliminated by appropriate type cast
Wrong license statements corrected in several files.
Copyright and license statements added in XSD and GLSL files.
Copyright year updated in some files.
Obsolete documentation files removed from DrawResources.
Removing pPotentially uninitialized local variable
Got rid of most of warnings C4701: Potentially uninitialized local variable
Removed redundant variable definitions.
Refactored a part of AppParCurves_ResolConstraint CTOR.
Replaced 0. to Precision::Confusion for tolerance vars;
Changed values for min and max parameter vars;
Got rid of redundant variables' initialization.
