OpenCascade/occt
1
0
Fork 0
mirror of https://git.dev.opencascade.org/repos/occt.git synced 2025-08-19 13:40:49 +03:00
Code Activity
Files
94807a7d97f8787a5f48823faffd40c1aebb0a73
occt/src/RWStepDimTol/RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndGeoTolWthMod.cxx
ika 51663cb434 0028250: Data Exchange - Wrong number of geometric tolerance modifiers. 
fix some copy paste mistakes,
update test cases.
2016-12-22 17:24:30 +03:00

247 lines
13 KiB
C++
Raw Blame History

// Created on: 2015-08-10
// Created by: Irina KRYLOVA
// Copyright (c) 2015 OPEN CASCADE SAS
//
// This file is part of Open CASCADE Technology software library.
//
// This library is free software; you can redistribute it and/or modify it under
// the terms of the GNU Lesser General Public License version 2.1 as published
// by the Free Software Foundation, with special exception defined in the file
// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
// distribution for complete text of the license and disclaimer of any warranty.
//
// Alternatively, this file may be used under the terms of Open CASCADE
// commercial license or contractual agreement.
#include <Interface_Check.hxx>
#include <Interface_EntityIterator.hxx>
#include <RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndGeoTolWthMod.hxx>
#include <StepBasic_MeasureWithUnit.hxx>
#include <StepData_StepReaderData.hxx>
#include <StepData_StepWriter.hxx>
#include <StepDimTol_DatumReference.hxx>
#include <StepDimTol_GeometricToleranceTarget.hxx>
#include <StepDimTol_GeometricToleranceType.hxx>
#include <StepDimTol_GeometricToleranceWithDatumReference.hxx>
#include <StepDimTol_GeoTolAndGeoTolWthDatRefAndGeoTolWthMod.hxx>
#include <StepDimTol_HArray1OfDatumSystemOrReference.hxx>
#include <StepDimTol_GeometricToleranceWithModifiers.hxx>
//=======================================================================
//function : RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndGeoTolWthMod
//purpose :
//=======================================================================
RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndGeoTolWthMod::RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndGeoTolWthMod()
{
}
//=======================================================================
//function : ReadStep
//purpose :
//=======================================================================
void RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndGeoTolWthMod::ReadStep
(const Handle(StepData_StepReaderData)& data,
const Standard_Integer num0, Handle(Interface_Check)& ach,
const Handle(StepDimTol_GeoTolAndGeoTolWthDatRefAndGeoTolWthMod)& ent) const
{
Standard_Integer num = 0;//num0;
data->NamedForComplex("GEOMETRIC_TOLERANCE","GMTTLR",num0,num,ach);
if (!data->CheckNbParams(num,4,ach,"geometric_tolerance")) return;
// Own fields of GeometricTolerance
Handle(TCollection_HAsciiString) aName;
data->ReadString (num, 1, "name", ach, aName);
Handle(TCollection_HAsciiString) aDescription;
data->ReadString (num, 2, "description", ach, aDescription);
Handle(StepBasic_MeasureWithUnit) aMagnitude;
data->ReadEntity (num, 3, "magnitude", ach, STANDARD_TYPE(StepBasic_MeasureWithUnit), aMagnitude);
StepDimTol_GeometricToleranceTarget aTolerancedShapeAspect;
data->ReadEntity (num, 4, "toleranced_shape_aspect", ach, aTolerancedShapeAspect);
data->NamedForComplex("GEOMETRIC_TOLERANCE_WITH_DATUM_REFERENCE","GTWDR",num0,num,ach);
// Own fields of GeometricToleranceWithDatumReference
Handle(StepDimTol_HArray1OfDatumSystemOrReference) aDatumSystem;
Standard_Integer sub5 = 0;
if ( data->ReadSubList (num, 1, "datum_system", ach, sub5) ) {
Standard_Integer nb0 = data->NbParams(sub5);
aDatumSystem = new StepDimTol_HArray1OfDatumSystemOrReference (1, nb0);
Standard_Integer num2 = sub5;
for ( Standard_Integer i0=1; i0 <= nb0; i0++ ) {
StepDimTol_DatumSystemOrReference anIt0;
data->ReadEntity (num2, i0, "datum_system_or_reference", ach, anIt0);
aDatumSystem->SetValue(i0, anIt0);
}
}
// Initialize entity
Handle(StepDimTol_GeometricToleranceWithDatumReference) aGTWDR =
new StepDimTol_GeometricToleranceWithDatumReference;
aGTWDR->SetDatumSystem(aDatumSystem);
data->NamedForComplex("GEOMETRIC_TOLERANCE_WITH_MODIFIERS",num0,num,ach);
// Own fields of ModifiedGeometricTolerance
Handle(StepDimTol_HArray1OfGeometricToleranceModifier) aModifiers;
Standard_Integer sub = 0;
if ( data->ReadSubList (num, 1, "modifiers", ach, sub) ) {
Standard_Integer nb0 = data->NbParams(sub);
aModifiers = new StepDimTol_HArray1OfGeometricToleranceModifier (1, nb0);
Standard_Integer num2 = sub;
for ( Standard_Integer i0=1; i0 <= nb0; i0++ ) {
StepDimTol_GeometricToleranceModifier anIt0 = StepDimTol_GTMMaximumMaterialRequirement;
if (data->ParamType (num2, i0) == Interface_ParamEnum) {
Standard_CString text = data->ParamCValue(num2, i0);
if (strcmp(text, ".ANY_CROSS_SECTION.")==0) anIt0 = StepDimTol_GTMAnyCrossSection;
else if (strcmp(text, ".COMMON_ZONE.")==0) anIt0 = StepDimTol_GTMCommonZone;
else if (strcmp(text, ".EACH_RADIAL_ELEMENT.")==0) anIt0 = StepDimTol_GTMEachRadialElement;
else if (strcmp(text, ".FREE_STATE.")==0) anIt0 = StepDimTol_GTMFreeState;
else if (strcmp(text, ".LEAST_MATERIAL_REQUIREMENT.")==0) anIt0 = StepDimTol_GTMLeastMaterialRequirement;
else if (strcmp(text, ".LINE_ELEMENT.")==0) anIt0 = StepDimTol_GTMLineElement;
else if (strcmp(text, ".MAJOR_DIAMETER.")==0) anIt0 = StepDimTol_GTMMajorDiameter;
else if (strcmp(text, ".MAXIMUM_MATERIAL_REQUIREMENT.")==0) anIt0 = StepDimTol_GTMMaximumMaterialRequirement;
else if (strcmp(text, ".MINOR_DIAMETER.")==0) anIt0 = StepDimTol_GTMMinorDiameter;
else if (strcmp(text, ".NOT_CONVEX.")==0) anIt0 = StepDimTol_GTMNotConvex;
else if (strcmp(text, ".PITCH_DIAMETER.")==0) anIt0 = StepDimTol_GTMPitchDiameter;
else if (strcmp(text, ".RECIPROCITY_REQUIREMENT.")==0) anIt0 = StepDimTol_GTMReciprocityRequirement;
else if (strcmp(text, ".SEPARATE_REQUIREMENT.")==0) anIt0 = StepDimTol_GTMSeparateRequirement;
else if (strcmp(text, ".STATISTICAL_TOLERANCE.")==0) anIt0 = StepDimTol_GTMStatisticalTolerance;
else if (strcmp(text, ".TANGENT_PLANE.")==0) anIt0 = StepDimTol_GTMTangentPlane;
else ach->AddFail("Parameter #5 (modifiers) has not allowed value");
}
else ach->AddFail("Parameter #5 (modifier) is not set of enumerations");
aModifiers->SetValue(i0, anIt0);
}
}
Handle(StepDimTol_GeometricToleranceWithModifiers) aGTWM = new StepDimTol_GeometricToleranceWithModifiers;
aGTWM->SetModifiers(aModifiers);
//Choose type of geometric tolerance
TColStd_SequenceOfAsciiString aTypes;
data->ComplexType(num0, aTypes);
Standard_CString aFirst = aTypes.First().ToCString();
Standard_CString aLast = aTypes.Last().ToCString();
StepDimTol_GeometricToleranceType aType = StepDimTol_GTTPositionTolerance;
if (strcmp(aFirst, "ANGULARITY_TOLERANCE") == 0) aType = StepDimTol_GTTAngularityTolerance;
else if (strcmp(aFirst, "CIRCULAR_RUNOUT_TOLERANCE") == 0) aType = StepDimTol_GTTCircularRunoutTolerance;
else if (strcmp(aFirst, "COAXIALITY_TOLERANCE") == 0) aType = StepDimTol_GTTCoaxialityTolerance;
else if (strcmp(aFirst, "CONCENTRICITY_TOLERANCE") == 0) aType = StepDimTol_GTTConcentricityTolerance;
else if (strcmp(aFirst, "CYLINDRICITY_TOLERANCE") == 0) aType = StepDimTol_GTTCylindricityTolerance;
else if (strcmp(aFirst, "FLATNESS_TOLERANCE") == 0) aType = StepDimTol_GTTFlatnessTolerance;
else if (strcmp(aLast, "LINE_PROFILE_TOLERANCE") == 0) aType = StepDimTol_GTTLineProfileTolerance;
else if (strcmp(aLast, "PARALLELISM_TOLERANCE") == 0) aType = StepDimTol_GTTParallelismTolerance;
else if (strcmp(aLast, "PERPENDICULARITY_TOLERANCE") == 0) aType = StepDimTol_GTTPerpendicularityTolerance;
else if (strcmp(aLast, "POSITION_TOLERANCE") == 0) aType = StepDimTol_GTTPositionTolerance;
else if (strcmp(aLast, "ROUNDNESS_TOLERANCE") == 0) aType = StepDimTol_GTTRoundnessTolerance;
else if (strcmp(aLast, "STRAIGHTNESS_TOLERANCE") == 0) aType = StepDimTol_GTTStraightnessTolerance;
else if (strcmp(aLast, "SURFACE_PROFILE_TOLERANCE") == 0) aType = StepDimTol_GTTSurfaceProfileTolerance;
else if (strcmp(aLast, "SYMMETRY_TOLERANCE") == 0) aType = StepDimTol_GTTSymmetryTolerance;
else if (strcmp(aLast, "TOTAL_RUNOUT_TOLERANCE") == 0) aType = StepDimTol_GTTTotalRunoutTolerance;
else ach->AddFail("The type of geometric tolerance is not supported");
// Initialize entity
ent->Init(aName, aDescription, aMagnitude, aTolerancedShapeAspect, aGTWDR, aGTWM, aType);
}
//=======================================================================
//function : WriteStep
//purpose :
//=======================================================================
void RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndGeoTolWthMod::WriteStep
(StepData_StepWriter& SW,
const Handle(StepDimTol_GeoTolAndGeoTolWthDatRefAndGeoTolWthMod)& ent) const
{
StepDimTol_GeometricToleranceType aType = ent->GetToleranceType();
if (aType == StepDimTol_GTTAngularityTolerance)
SW.StartEntity("ANGULARITY_TOLERANCE");
else if (aType == StepDimTol_GTTCircularRunoutTolerance)
SW.StartEntity("CIRCULAR_RUNOUT_TOLERANCE");
else if (aType == StepDimTol_GTTCoaxialityTolerance)
SW.StartEntity("COAXIALITY_TOLERANCE");
else if (aType == StepDimTol_GTTConcentricityTolerance)
SW.StartEntity("CONCENTRICITY_TOLERANCE");
else if (aType == StepDimTol_GTTCylindricityTolerance)
SW.StartEntity("CYLINDRICITY_TOLERANCE");
else if (aType == StepDimTol_GTTFlatnessTolerance)
SW.StartEntity("FLATNESS_TOLERANCE");
SW.StartEntity("GEOMETRIC_TOLERANCE");
SW.Send(ent->Name());
SW.Send(ent->Description());
SW.Send(ent->Magnitude());
SW.Send(ent->TolerancedShapeAspect().Value());
SW.StartEntity("GEOMETRIC_TOLERANCE_WITH_DATUM_REFERENCE");
SW.OpenSub();
for(Standard_Integer i4=1; i4<=ent->GetGeometricToleranceWithDatumReference()->DatumSystemAP242()->Length(); i4++) {
StepDimTol_DatumSystemOrReference Var0 =
ent->GetGeometricToleranceWithDatumReference()->DatumSystemAP242()->Value(i4);
SW.Send(Var0.Value());
}
SW.CloseSub();
SW.StartEntity("GEOMETRIC_TOLERANCE_WITH_MODIFIERS");
SW.OpenSub();
Handle(StepDimTol_GeometricToleranceWithModifiers) aGTWM = ent->GetGeometricToleranceWithModifiers();
for (Standard_Integer i = 1; i <= aGTWM->NbModifiers(); i++) {
switch (aGTWM->ModifierValue(i)) {
case StepDimTol_GTMAnyCrossSection: SW.SendEnum (".ANY_CROSS_SECTION."); break;
case StepDimTol_GTMCommonZone: SW.SendEnum (".COMMON_ZONE."); break;
case StepDimTol_GTMEachRadialElement: SW.SendEnum (".EACH_RADIAL_ELEMENT."); break;
case StepDimTol_GTMFreeState: SW.SendEnum (".FREE_STATE."); break;
case StepDimTol_GTMLeastMaterialRequirement: SW.SendEnum (".LEAST_MATERIAL_REQUIREMENT."); break;
case StepDimTol_GTMLineElement: SW.SendEnum (".LINE_ELEMENT."); break;
case StepDimTol_GTMMajorDiameter: SW.SendEnum (".MAJOR_DIAMETER."); break;
case StepDimTol_GTMMaximumMaterialRequirement: SW.SendEnum (".MAXIMUM_MATERIAL_REQUIREMENT."); break;
case StepDimTol_GTMMinorDiameter: SW.SendEnum (".MINOR_DIAMETER."); break;
case StepDimTol_GTMNotConvex: SW.SendEnum (".NOT_CONVEX."); break;
case StepDimTol_GTMPitchDiameter: SW.SendEnum (".PITCH_DIAMETER."); break;
case StepDimTol_GTMReciprocityRequirement: SW.SendEnum (".RECIPROCITY_REQUIREMENT."); break;
case StepDimTol_GTMSeparateRequirement: SW.SendEnum (".SEPARATE_REQUIREMENT."); break;
case StepDimTol_GTMStatisticalTolerance: SW.SendEnum (".STATISTICAL_TOLERANCE."); break;
case StepDimTol_GTMTangentPlane: SW.SendEnum (".TANGENT_PLANE."); break;
}
}
SW.CloseSub();
if (aType == StepDimTol_GTTLineProfileTolerance)
SW.StartEntity("LINE_PROFILE_TOLERANCE");
else if (aType == StepDimTol_GTTParallelismTolerance)
SW.StartEntity("PARALLELISM_TOLERANCE");
else if (aType == StepDimTol_GTTPerpendicularityTolerance)
SW.StartEntity("PERPENDICULARITY_TOLERANCE");
else if (aType == StepDimTol_GTTPositionTolerance)
SW.StartEntity("POSITION_TOLERANCE");
else if (aType == StepDimTol_GTTRoundnessTolerance)
SW.StartEntity("ROUNDNESS_TOLERANCE");
else if (aType == StepDimTol_GTTStraightnessTolerance)
SW.StartEntity("STRAIGHTNESS_TOLERANCE");
else if (aType == StepDimTol_GTTSurfaceProfileTolerance)
SW.StartEntity("SURFACE_PROFILE_TOLERANCE");
else if (aType == StepDimTol_GTTSymmetryTolerance)
SW.StartEntity("SYMMETRY_TOLERANCE");
else if (aType == StepDimTol_GTTTotalRunoutTolerance)
SW.StartEntity("TOTAL_RUNOUT_TOLERANCE");
}
//=======================================================================
//function : Share
//purpose :
//=======================================================================
void RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndGeoTolWthMod::Share
(const Handle(StepDimTol_GeoTolAndGeoTolWthDatRefAndGeoTolWthMod)& ent,
Interface_EntityIterator& iter) const
{
// Own fields of GeometricTolerance
iter.AddItem (ent->Magnitude());
iter.AddItem (ent->TolerancedShapeAspect().Value());
// Own fields of GeometricToleranceWithDatumReference
for (Standard_Integer i3=1; i3<=ent->GetGeometricToleranceWithDatumReference()->DatumSystemAP242()->Length(); i3++ ) {
StepDimTol_DatumSystemOrReference Var0 = ent->GetGeometricToleranceWithDatumReference()->DatumSystemAP242()->Value(i3);
iter.AddItem (Var0.Value());
}
}
View Git Blame Copy Permalink