OpenCascade/occt
1
0
Fork 0
mirror of https://git.dev.opencascade.org/repos/occt.git synced 2025-06-30 12:14:08 +03:00
Code
occt/tests/bugs/modalg_7
History
nbv 94783b5111 0028085: Incorrect result of CUT operation 
Before the fix, small arc of circle returned as intersection result. It was connected with the fact that the circle always was limited in 0 and 2*PI points. Currently the bounds of the circle (retrieved as an intersection curve) are computed from the real domain of the arguments (there is not a snap to the fixed 0 and 2*PI points).
2018-07-31 19:21:41 +03:00
..
begin
0023378: BRepAlgoAPI_Cut returns wrong result
2017-06-01 13:55:29 +03:00
bug83
Update of tests database
2017-10-06 10:28:34 +03:00
bug5081_1
Update of tests database
2017-10-06 10:28:34 +03:00
bug5081_2
Update of tests database
2017-10-06 10:28:34 +03:00
bug5582
Update of tests database
2017-10-06 10:28:34 +03:00
bug10377_1
Update of tests database
2017-10-06 10:28:34 +03:00
bug10377_2
Update of tests database
2017-10-06 10:28:34 +03:00
bug13565_1
Update of tests database
2017-10-06 10:28:34 +03:00
bug13565_2
Update of tests database
2017-10-06 10:28:34 +03:00
bug13566
Update of tests database
2017-10-06 10:28:34 +03:00
bug21134
0028097: Test system does not recognize 'fail...' messages as errors
2018-03-26 15:40:11 +03:00
bug21413
Test for 0021413: Pipe fails - very sensitive to spine parameterization
2017-06-29 14:24:31 +03:00
bug21414
Test for 0021414: GeomAPI_IntCS fails to find all intersections between line and surface of revolution
2017-06-29 14:24:54 +03:00
bug21494
Update of tests database
2017-10-12 12:23:55 +03:00
bug22288
Test for 0022288: checkshape works wrong with attached shape.
2017-07-13 12:36:04 +03:00
bug22750
0029322: Unify faces classification procedures in Boolean Operations
2017-11-23 13:04:52 +03:00
bug22821
Update of tests data base for reproduced issues
2017-07-28 15:16:41 +03:00
bug22886
Test for 0022886: Bug in boolean
2017-07-13 17:29:44 +03:00
bug23163_1
Update of tests data base for reproduced issues
2017-07-28 15:16:41 +03:00
bug23163_2
Update of tests data base for reproduced issues
2017-07-28 15:16:41 +03:00
bug23163_3
Update of tests data base for reproduced issues
2017-07-28 15:16:41 +03:00
bug23166
Test for 0023166: Intersection of plane and cone produces wrong result
2017-07-20 11:45:58 +03:00
bug23171_1
Update of tests database
2017-11-24 15:39:23 +03:00
bug23171_2
Update of tests database
2017-11-24 15:39:23 +03:00
bug23176
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug23187
Test for 0023187: Cut with a compound
2017-07-20 11:40:37 +03:00
bug23343
Update of tests data base for reproduced issues
2017-07-28 15:16:41 +03:00
bug23378_1
0023378: BRepAlgoAPI_Cut returns wrong result
2017-06-01 13:55:29 +03:00
bug23378_2
0023378: BRepAlgoAPI_Cut returns wrong result
2017-06-01 13:55:29 +03:00
bug23386
Update of tests data base for reproduced issues
2017-07-28 15:16:41 +03:00
bug23610
Update of tests database
2017-11-24 15:39:23 +03:00
bug23612
Update of tests database
2017-11-24 15:39:23 +03:00
bug23660
0029711: General Fuse operation produces invalid result
2018-07-27 16:19:15 +03:00
bug23667
Update of tests data base for reproduced issues
2017-07-28 15:16:41 +03:00
bug23669
Update of tests database
2017-11-24 15:39:23 +03:00
bug23838
Update of tests database
2017-08-10 13:56:12 +03:00
bug23902
Update of tests database
2017-11-24 15:39:23 +03:00
bug23925
Update of tests database
2017-08-10 13:56:12 +03:00
bug23927
0028599: Replacement of old Boolean operations with new ones in BRepProj_Projection algorithm
2018-02-01 18:46:36 +03:00
bug23942
Update of tests database
2017-08-10 13:56:12 +03:00
bug23972
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug24145_1
Test for 0024145: OCCT fails to project a wire onto BSplineSurface using BRepAlgo_NormalProjection
2017-07-27 13:59:28 +03:00
bug24145_2
Test for 0024145: OCCT fails to project a wire onto BSplineSurface using BRepAlgo_NormalProjection
2017-07-27 13:59:28 +03:00
bug24185
Update of tests data base for reproduced issues
2017-07-28 15:16:41 +03:00
bug24215
Update of tests data base for reproduced issues
2017-07-28 15:16:41 +03:00
bug24251
0026570: Crash on attempt to rotate a shape.
2017-12-08 16:39:30 +03:00
bug24319
Update of tests database
2017-11-24 15:39:23 +03:00
bug24365
Update of tests data base for reproduced issues
2017-07-28 15:16:41 +03:00
bug24418_1
0029494: Intersection line between two parametric surfaces is restricted incorrectly if it matches the surface boundary
2018-02-16 15:09:10 +03:00
bug24418_2
0029494: Intersection line between two parametric surfaces is restricted incorrectly if it matches the surface boundary
2018-02-16 15:09:10 +03:00
bug24421
Update of tests data base for reproduced issues
2017-07-28 15:16:41 +03:00
bug24424
Test for 0024424: BRepAlgoAPI_Cut throws Standard_ConstructionError with disjoint, but adjacent solids
2017-07-27 14:00:09 +03:00
bug24429
Update of tests data base for reproduced issues
2017-07-28 15:16:41 +03:00
bug24490
Update of tests database
2017-08-10 13:56:12 +03:00
bug24568
Update of tests database
2017-08-10 13:56:12 +03:00
bug24632_1
0029333: Boolean Operations - Prevent modification of the input shapes in case their sub-shapes have not been modified
2017-11-30 12:11:20 +03:00
bug24632_2
0029333: Boolean Operations - Prevent modification of the input shapes in case their sub-shapes have not been modified
2017-11-30 12:11:20 +03:00
bug24632_3
Update of tests database
2017-10-06 10:28:34 +03:00
bug24692
Update of tests database
2017-08-10 13:56:12 +03:00
bug24772
Update of tests database
2017-08-10 13:56:12 +03:00
bug24954_1
Update of tests database
2017-08-10 13:56:12 +03:00
bug24954_2
Update of tests database
2017-08-10 13:56:12 +03:00
bug24954_3
Update of tests database
2017-08-10 13:56:12 +03:00
bug24954_4
Update of tests database
2017-08-10 13:56:12 +03:00
bug24954_5
Update of tests database
2017-08-10 13:56:12 +03:00
bug24954_6
Update of tests database
2017-08-10 13:56:12 +03:00
bug24954_7
Update of tests database
2017-08-10 13:56:12 +03:00
bug24954_8
Update of tests database
2017-08-10 13:56:12 +03:00
bug24954_9
Update of tests database
2017-08-10 13:56:12 +03:00
bug25023
0025023: Check fails after cut operation
2017-08-08 17:44:01 +03:00
bug25104
0025104: Prism from BSpline curve can not be chamfered
2017-11-14 15:56:55 +03:00
bug25206
Update of tests database
2017-08-10 13:56:12 +03:00
bug25385
0028599: Replacement of old Boolean operations with new ones in BRepProj_Projection algorithm
2018-02-01 18:46:36 +03:00
bug25395_1
Update of tests database
2017-08-10 13:56:12 +03:00
bug25395_2
Update of tests database
2017-08-10 13:56:12 +03:00
bug25458
Update of tests database
2017-08-10 13:56:12 +03:00
bug25478_1
Update of tests database
2017-08-10 13:56:12 +03:00
bug25478_2
Update of tests database
2017-08-10 13:56:12 +03:00
bug25521
Update of tests database
2017-08-10 13:56:12 +03:00
bug25542
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug25626
Update of tests database
2017-08-10 13:56:12 +03:00
bug25730
0028131: BRepOffset_MakeOffset can't create offset with a face which created by filling 3 bsplinecurve
2017-08-30 11:22:47 +03:00
bug25776
Update of tests database
2017-08-10 13:56:12 +03:00
bug25798
Update of tests database
2017-08-10 13:56:12 +03:00
bug25856_1
Update of tests database
2017-08-10 13:56:12 +03:00
bug25856_2
Update of tests database
2017-08-10 13:56:12 +03:00
bug25879
0025879: result of blend fails the bopcheck
2017-11-22 15:45:26 +03:00
bug25930
0027784: Thickness fails on cylinder with draft
2017-11-01 17:01:59 +03:00
bug25939
Update of tests database
2017-08-18 12:13:40 +03:00
bug25966
0025966: Booleans with tangent faces
2017-11-14 15:56:57 +03:00
bug25968
0025968: boolean returning an invalid shape
2017-11-14 15:57:02 +03:00
bug25979
Update of tests database
2017-08-10 13:56:12 +03:00
bug25983_1
0029580: Regression: invalid result of BOP Fuse
2018-03-20 15:18:16 +03:00
bug25983_2
0029580: Regression: invalid result of BOP Fuse
2018-03-20 15:18:16 +03:00
bug25994
0029496: No intersection curve between faces if starting points are given
2018-02-16 15:07:01 +03:00
bug26034
Update of tests database
2017-08-10 13:56:12 +03:00
bug26077_1
Update of tests database
2017-08-10 13:56:12 +03:00
bug26077_2
Update of tests database
2017-08-10 13:56:12 +03:00
bug26225_1
0028097: Test system does not recognize 'fail...' messages as errors
2018-03-26 15:40:11 +03:00
bug26225_2
0028097: Test system does not recognize 'fail...' messages as errors
2018-03-26 15:40:11 +03:00
bug26295
Update of tests database
2017-08-18 12:13:40 +03:00
bug26374
Update of tests database
2017-08-18 12:13:40 +03:00
bug26516
0026516: Creating revolved shapes fails in some cases
2017-08-17 15:47:25 +03:00
bug26558
Update of tests database
2017-08-18 12:13:40 +03:00
bug26563
Update of tests database
2017-08-18 12:13:40 +03:00
bug26568
Update of tests database
2017-08-18 12:13:40 +03:00
bug26570
0026570: Crash on attempt to rotate a shape.
2017-12-08 16:39:30 +03:00
bug26604
Update of tests database
2017-08-18 12:13:40 +03:00
bug26655
Update of tests database
2017-08-18 12:13:40 +03:00
bug26697
Update of tests database
2017-08-18 12:13:40 +03:00
bug26776
0026776: Bad result of section algorithm
2017-08-17 15:47:08 +03:00
bug26793_1
Update of tests database
2017-08-18 12:13:40 +03:00
bug26793_2
Update of tests database
2017-08-18 12:13:40 +03:00
bug26795
0026795: Unable to perform General Fuse operation on the attached faces
2017-09-22 11:51:49 +03:00
bug26842_1
Update of tests database
2017-08-18 12:13:40 +03:00
bug26842_2
Update of tests database
2017-08-18 12:13:40 +03:00
bug26882
Update of tests database
2017-08-18 12:13:40 +03:00
bug26883_1
Update of tests database
2017-08-18 12:13:40 +03:00
bug26883_2
Update of tests database
2017-08-18 12:13:40 +03:00
bug26883_3
Update of tests database
2017-08-18 12:13:40 +03:00
bug26883_4
0029646: Boolean Operations algorithm produces a face with self-intersecting wire
2018-03-29 17:13:12 +03:00
bug26933
0029133: Unstable test cases
2017-11-02 17:02:45 +03:00
bug27004
0029544: Regression vs 7.2.0: ShapeUpgrade_UnifySameDomain fails to merge linear edges
2018-03-16 14:56:16 +03:00
bug27049
0029711: General Fuse operation produces invalid result
2018-07-27 16:19:15 +03:00
bug27090
Update of tests database
2017-08-24 21:24:34 +03:00
bug27224
Update of tests database
2017-08-24 21:24:34 +03:00
bug27227
Update of tests database
2017-08-24 21:24:34 +03:00
bug27230
0027230: Boolean operations fails on attached shapes
2018-07-20 16:56:55 +03:00
bug27378
Update of tests database
2017-08-24 21:24:34 +03:00
bug27390_1
Update of tests database
2017-08-24 21:24:34 +03:00
bug27390_2
Update of tests database
2017-08-24 21:24:34 +03:00
bug27419
Update of tests database
2017-08-18 12:13:40 +03:00
bug27469_1
Update of tests database
2017-08-18 12:13:40 +03:00
bug27469_2
Update of tests database
2017-08-18 12:13:40 +03:00
bug27471
Update of tests database
2017-08-18 12:13:40 +03:00
bug27472
Update of tests database
2017-08-18 12:13:40 +03:00
bug27614
Update of tests database
2017-08-18 12:13:40 +03:00
bug27623
Update of tests database
2017-08-24 21:24:34 +03:00
bug27648
0029511: Section fails for these two faces
2018-06-14 14:03:08 +03:00
bug27683
0029322: Unify faces classification procedures in Boolean Operations
2017-11-23 13:04:52 +03:00
bug27687
Update of tests database
2017-08-24 21:24:34 +03:00
bug27711
0028499: Checkshape incorrectly reports BRepCheck_NotClosed when gap is covered by vertex tolerance
2017-12-29 15:44:06 +03:00
bug27747
0027747: Incomplete section curves between faces
2018-02-16 15:12:43 +03:00
bug27760
0027760: [regression] BRepAlgoAPI_Common returns empty result
2017-08-24 19:12:01 +03:00
bug27784
0027784: Thickness fails on cylinder with draft
2017-11-01 17:01:59 +03:00
bug27908
Update of tests database
2017-08-24 21:24:34 +03:00
bug27909
Update of tests database
2017-08-24 21:24:34 +03:00
bug27910
0028499: Checkshape incorrectly reports BRepCheck_NotClosed when gap is covered by vertex tolerance
2017-12-29 15:44:06 +03:00
bug27911
Update of tests database
2017-08-24 21:24:34 +03:00
bug27912
Update of tests database
2017-08-24 21:24:34 +03:00
bug27928
Update of tests database
2017-08-24 21:24:34 +03:00
bug27936
0027936: [regression] BRepAlgoAPI_Common returns empty result for a solid and a face
2017-08-24 19:12:41 +03:00
bug27948
0029646: Boolean Operations algorithm produces a face with self-intersecting wire
2018-03-29 17:13:12 +03:00
bug27950
Update of tests database
2017-08-24 21:24:34 +03:00
bug28085_1
0028085: Incorrect result of CUT operation
2018-07-31 19:21:41 +03:00
bug28085_2
0028085: Incorrect result of CUT operation
2018-07-31 19:21:41 +03:00
bug28102_1
0028102: Problem cutting a plate with several holes (670)
2018-01-25 19:36:37 +03:00
bug28102_2
0028102: Problem cutting a plate with several holes (670)
2018-01-25 19:36:37 +03:00
bug28108
Update of tests database
2017-10-06 10:28:34 +03:00
bug28112_1
0028964: Draw - need to have command to apply ShapeFix_FixSmallFace tool
2017-08-24 19:13:04 +03:00
bug28112_2
0028964: Draw - need to have command to apply ShapeFix_FixSmallFace tool
2017-08-24 19:13:04 +03:00
bug28113_1
0028113: BOPAlgo_Builder produces invalid shape
2018-07-21 13:45:00 +03:00
bug28113_2
0029711: General Fuse operation produces invalid result
2018-07-27 16:19:15 +03:00
bug28119_1
Update of tests database
2017-08-24 21:24:34 +03:00
bug28119_2
Update of tests database
2017-08-24 21:24:34 +03:00
bug28119_3
Update of tests database
2017-08-24 21:24:34 +03:00
bug28123
0029711: General Fuse operation produces invalid result
2018-07-27 16:19:15 +03:00
bug28131
0028131: BRepOffset_MakeOffset can't create offset with a face which created by filling 3 bsplinecurve
2017-08-30 11:22:47 +03:00
bug28150_1
0028097: Test system does not recognize 'fail...' messages as errors
2018-03-26 15:40:11 +03:00
bug28150_2
0028150: Exception is raised during Boolean operation
2017-09-22 11:52:05 +03:00
bug28151
Update of tests database
2017-08-24 21:24:34 +03:00
bug28157
0028157: Setting the tolerance of a face to a small value and then fixing it leads to a face with vertex-vertex intersections
2017-09-22 11:51:27 +03:00
bug28167
Update of tests database
2017-10-06 10:28:34 +03:00
bug28168
Update of tests database
2017-10-06 10:28:34 +03:00
bug28195_1
0028195: Boolean common returns empty result for a solid where some surfaces of revolution touch the axis
2017-08-29 11:28:43 +03:00
bug28195_2
0028195: Boolean common returns empty result for a solid where some surfaces of revolution touch the axis
2017-08-29 11:28:43 +03:00
bug28200
0028499: Checkshape incorrectly reports BRepCheck_NotClosed when gap is covered by vertex tolerance
2017-12-29 15:44:06 +03:00
bug28211_1
0028211: Modeling Algorithms - Boolean fuse operation produces incorrect result
2018-01-12 14:54:59 +03:00
bug28211_2
0028211: Modeling Algorithms - Boolean fuse operation produces incorrect result
2018-01-12 14:54:59 +03:00
bug28216
0029511: Section fails for these two faces
2018-06-14 14:03:08 +03:00
bug28245
Update of tests database
2017-10-06 10:28:34 +03:00
bug28248
0028248: [Regression] HLR Algo result is retrieved from the last added shape only
2017-12-20 18:51:43 +03:00
bug28274
0029368: Incorrect intersection state of the intersection point of two 2d curves
2018-01-17 16:43:31 +03:00
bug28279
Update of tests database
2017-10-06 10:28:34 +03:00
bug28354
Update of tests database
2017-10-06 10:28:34 +03:00
bug28366
Update of tests database
2017-10-06 10:28:34 +03:00
bug28385_1
0028385: Improve drawing isolines (DBRep_IsoBuilder algorithm)
2018-01-23 20:11:08 +03:00
bug28385_2
0028385: Improve drawing isolines (DBRep_IsoBuilder algorithm)
2018-01-23 20:11:08 +03:00
bug28385_3
0028385: Improve drawing isolines (DBRep_IsoBuilder algorithm)
2018-01-23 20:11:08 +03:00
bug28385_4
0028385: Improve drawing isolines (DBRep_IsoBuilder algorithm)
2018-01-23 20:11:08 +03:00
bug28385_5
0028385: Improve drawing isolines (DBRep_IsoBuilder algorithm)
2018-01-23 20:11:08 +03:00
bug28385_6
0028385: Improve drawing isolines (DBRep_IsoBuilder algorithm)
2018-01-23 20:11:08 +03:00
bug28385_7
0028385: Improve drawing isolines (DBRep_IsoBuilder algorithm)
2018-01-23 20:11:08 +03:00
bug28385_8
0028385: Improve drawing isolines (DBRep_IsoBuilder algorithm)
2018-01-23 20:11:08 +03:00
bug28385_9
0028385: Improve drawing isolines (DBRep_IsoBuilder algorithm)
2018-01-23 20:11:08 +03:00
bug28385_10
0028385: Improve drawing isolines (DBRep_IsoBuilder algorithm)
2018-01-23 20:11:08 +03:00
bug28385_11
0029368: Incorrect intersection state of the intersection point of two 2d curves
2018-01-17 16:43:31 +03:00
bug28388_1
0028388: Boolean common of simple face and solid results in empty compound
2017-08-30 13:52:36 +03:00
bug28388_2
0028388: Boolean common of simple face and solid results in empty compound
2017-08-30 13:52:36 +03:00
bug28393_1
0029711: General Fuse operation produces invalid result
2018-07-27 16:19:15 +03:00
bug28393_2
Update of tests database
2017-10-06 10:28:34 +03:00
bug28402
Update of tests database
2017-10-06 10:28:34 +03:00
bug28406
Update of tests database
2017-10-06 10:28:34 +03:00
bug28485
0029237: Improve performance of Boolean Operations
2017-11-01 17:27:08 +03:00
bug28485_1
0029237: Improve performance of Boolean Operations
2017-11-01 17:27:08 +03:00
bug28499
0028499: Checkshape incorrectly reports BRepCheck_NotClosed when gap is covered by vertex tolerance
2017-12-29 15:44:06 +03:00
bug28544_1
0029494: Intersection line between two parametric surfaces is restricted incorrectly if it matches the surface boundary
2018-02-16 15:09:10 +03:00
bug28544_2
Update of tests database
2017-10-06 10:28:34 +03:00
bug28551
Test for 0028551: Bad result of general fuse
2017-07-27 13:59:05 +03:00
bug28557
0029323: Intersection algorithm produces the curve with oscillation
2017-12-08 16:39:03 +03:00
bug28571_1
Update of tests database
2017-10-06 10:28:34 +03:00
bug28571_2
Update of tests database
2017-10-06 10:28:34 +03:00
bug28572_1
Update of tests database
2017-10-06 10:28:34 +03:00
bug28572_2
Update of tests database
2017-10-06 10:28:34 +03:00
bug28596_1
Update of tests database
2017-10-06 10:28:34 +03:00
bug28596_2
Update of tests database
2017-10-06 10:28:34 +03:00
bug28640
Update of tests database
2017-10-06 10:28:34 +03:00
bug28656
Update of tests database
2017-10-06 10:28:34 +03:00
bug28696_1
Update of tests database
2017-10-06 10:28:34 +03:00
bug28696_2
Update of tests database
2017-10-06 10:28:34 +03:00
bug28700_1
Update of tests database
2017-10-06 10:28:34 +03:00
bug28700_2
Update of tests database
2017-10-06 10:28:34 +03:00
bug28700_3
Update of tests database
2017-10-06 10:28:34 +03:00
bug28700_4
Update of tests database
2017-10-06 10:28:34 +03:00
bug28700_5
Update of tests database
2017-10-06 10:28:34 +03:00
bug28722
0028722: Conversion of a spherical face to a spline produces an invalid shape
2017-12-20 18:51:13 +03:00
bug28739
Update of tests database
2017-10-06 10:28:34 +03:00
bug28763
0028763: Projection of a short line segment on a polar surface causes exception
2017-10-19 12:26:39 +03:00
bug28764
0028764: [Regression to 7.0] Intersection of faces gives exception in debug mode
2017-09-29 09:42:08 +03:00
bug28780
0028780: HLR with focus does not seem to work
2017-08-30 11:22:45 +03:00
bug28784
0028784: [HLR] Crash while getting hidden lines for a compound
2017-06-09 12:58:49 +03:00
bug28786_1
0028786: Refactoring of the Warning/Error reporting system of Boolean Operations Algorithm
2017-07-06 12:41:56 +03:00
bug28786_2
0028786: Refactoring of the Warning/Error reporting system of Boolean Operations Algorithm
2017-07-06 12:41:56 +03:00
bug28786_3
0028786: Refactoring of the Warning/Error reporting system of Boolean Operations Algorithm
2017-07-06 12:41:56 +03:00
bug28786_4
0028786: Refactoring of the Warning/Error reporting system of Boolean Operations Algorithm
2017-07-06 12:41:56 +03:00
bug28786_5
0028786: Refactoring of the Warning/Error reporting system of Boolean Operations Algorithm
2017-07-06 12:41:56 +03:00
bug28830
0028830: HalfSpace command chooses the wrong side of the given shell
2017-06-15 11:31:39 +03:00
bug28844_1
0028844: Regression vs 7.1.0: Exception is raised by the solid classification algorithm
2017-06-22 11:34:18 +03:00
bug28844_2
0028844: Regression vs 7.1.0: Exception is raised by the solid classification algorithm
2017-06-22 11:34:18 +03:00
bug28844_3
0028844: Regression vs 7.1.0: Exception is raised by the solid classification algorithm
2017-06-22 11:34:18 +03:00
bug28849
0028849: [Regression to 7.1.0] Exception in Boolean operation
2017-06-22 12:45:05 +03:00
bug28856
0028856: Extrema between two curves gives wrong result
2017-07-13 17:29:42 +03:00
bug28883_1
0028883: Invalid result of Section operation
2017-07-06 12:41:32 +03:00
bug28883_2
0028085: Incorrect result of CUT operation
2018-07-31 19:21:41 +03:00
bug28892_1
0028892: BOPAlgo_PaveFiller returns status "error: 11" in draw or raises exception in app on the given shapes set
2017-08-17 15:47:50 +03:00
bug28892_2
0029323: Intersection algorithm produces the curve with oscillation
2017-12-08 16:39:03 +03:00
bug28892_3
0029323: Intersection algorithm produces the curve with oscillation
2017-12-08 16:39:03 +03:00
bug28893_1
0028893: BOP cut produces result with artifacts consisting of tools parts
2017-08-17 15:48:15 +03:00
bug28893_2
0028893: BOP cut produces result with artifacts consisting of tools parts
2017-08-17 15:48:15 +03:00
bug28893_3
0028893: BOP cut produces result with artifacts consisting of tools parts
2017-08-17 15:48:15 +03:00
bug28893_4
0028893: BOP cut produces result with artifacts consisting of tools parts
2017-08-17 15:48:15 +03:00
bug28903
0028903: BRepOffset_MakeOffset produces invalid shape (thickshell) in Intersection mode
2018-03-29 17:13:04 +03:00
bug28909
0028909: Algorithm of BO is stuck while fusing shell and edges
2017-10-06 10:28:17 +03:00
bug28944
0028944: Cannot find section between two faces
2017-08-08 17:40:57 +03:00
bug28967
0028967: Boolean cut fails the first time, works the second time
2017-08-17 15:48:22 +03:00
bug28968
0028968: Incorrect offset for the faces with singularities
2017-08-30 13:52:56 +03:00
bug28982
0028982: 2D offset creates faulty result from wire
2017-08-09 18:11:03 +03:00
bug28984
0029323: Intersection algorithm produces the curve with oscillation
2017-12-08 16:39:03 +03:00
bug28995
0028995: UnifySameDomain produces invalid shape
2017-08-30 12:42:41 +03:00
bug29038
0029038: Modeling - IntTools_EdgeEdge::FindParameters() hangs on bad curve
2017-09-22 11:51:56 +03:00
bug29073
0029073: Regression: General Cut produces invalid shape
2017-09-28 10:46:50 +03:00
bug29099
0029099: Extra shapes in result of General Cut (box by ellipsoid)
2017-09-22 11:51:47 +03:00
bug29103
0029103: No intersection curve between faces if starting points are given
2017-09-22 11:52:02 +03:00
bug29159
0029159: Sewing fail when using a maximum tolerance
2017-10-06 10:28:08 +03:00
bug29162
0029162: Geom2dInt_GInter algorithm does not find intersection of ellipse and line
2017-11-09 18:08:11 +03:00
bug29175
0029175: BRepOffsetAPI_MakeOffset problem
2017-11-23 13:05:02 +03:00
bug29179
0029179: Result of Boolean common depends on an order of arguments
2017-12-14 17:44:27 +03:00
bug29182
0029182: BOPAlgo_PaveFiller sometimes raises exception in parallel mode
2017-10-19 12:26:47 +03:00
bug29182_1
0029182: BOPAlgo_PaveFiller sometimes raises exception in parallel mode
2017-10-19 12:26:47 +03:00
bug29183
0029183: Result of general fuse of shell and edge produces a shape with too large tolerance
2017-10-19 12:26:52 +03:00
bug29204
0029204: BRepOffsetAPI_MakePipeShell produces invalid result and raises exception in Draw
2017-11-14 15:57:57 +03:00
bug29234
0029234: BRepOffsetAPI_NormalProjection produces INTERNAL edges and vertices
2017-11-14 16:52:41 +03:00
bug29289
0029289: Wrong derivatives in math_TrigonometricFunctionRoots.cxx file
2017-11-27 11:01:21 +03:00
bug29293_1
0029293: Boolean Operations algorithm does not preserve the orientations of the faces
2017-11-08 16:38:56 +03:00
bug29293_2
0029293: Boolean Operations algorithm does not preserve the orientations of the faces
2017-11-08 16:38:56 +03:00
bug29301
0029301: Improve performance of Boolean Operations
2017-11-14 15:57:00 +03:00
bug29311_1
0029967: Draw Harness - command bounding has annoying syntax
2018-07-27 16:19:26 +03:00
bug29311_2
0029967: Draw Harness - command bounding has annoying syntax
2018-07-27 16:19:26 +03:00
bug29311_3
0029967: Draw Harness - command bounding has annoying syntax
2018-07-27 16:19:26 +03:00
bug29311_4
0029967: Draw Harness - command bounding has annoying syntax
2018-07-27 16:19:26 +03:00
bug29311_5
0029311: Implementation of the Oriented Bounding Boxes (OBB) functionality
2017-12-08 16:39:11 +03:00
bug29311_6
0029311: Implementation of the Oriented Bounding Boxes (OBB) functionality
2017-12-08 16:39:11 +03:00
bug29311_7
0029311: Implementation of the Oriented Bounding Boxes (OBB) functionality
2017-12-08 16:39:11 +03:00
bug29311_8
0029311: Implementation of the Oriented Bounding Boxes (OBB) functionality
2017-12-08 16:39:11 +03:00
bug29311_9
0029311: Implementation of the Oriented Bounding Boxes (OBB) functionality
2017-12-08 16:39:11 +03:00
bug29311_10
0029311: Implementation of the Oriented Bounding Boxes (OBB) functionality
2017-12-08 16:39:11 +03:00
bug29311_11
0029311: Implementation of the Oriented Bounding Boxes (OBB) functionality
2017-12-08 16:39:11 +03:00
bug29311_12
0029967: Draw Harness - command bounding has annoying syntax
2018-07-27 16:19:26 +03:00
bug29311_13
0029967: Draw Harness - command bounding has annoying syntax
2018-07-27 16:19:26 +03:00
bug29311_14
0029967: Draw Harness - command bounding has annoying syntax
2018-07-27 16:19:26 +03:00
bug29311_15
0029967: Draw Harness - command bounding has annoying syntax
2018-07-27 16:19:26 +03:00
bug29311_16
0029967: Draw Harness - command bounding has annoying syntax
2018-07-27 16:19:26 +03:00
bug29311_17
0029967: Draw Harness - command bounding has annoying syntax
2018-07-27 16:19:26 +03:00
bug29322_1
0029322: Unify faces classification procedures in Boolean Operations
2017-11-23 13:04:52 +03:00
bug29322_2
0029322: Unify faces classification procedures in Boolean Operations
2017-11-23 13:04:52 +03:00
bug29322_3
0029322: Unify faces classification procedures in Boolean Operations
2017-11-23 13:04:52 +03:00
bug29322_4
0029322: Unify faces classification procedures in Boolean Operations
2017-11-23 13:04:52 +03:00
bug29322_5
0029322: Unify faces classification procedures in Boolean Operations
2017-11-23 13:04:52 +03:00
bug29323
0029323: Intersection algorithm produces the curve with oscillation
2017-12-08 16:39:03 +03:00
bug29333_1
0029333: Boolean Operations - Prevent modification of the input shapes in case their sub-shapes have not been modified
2017-11-30 12:11:20 +03:00
bug29333_2
0029333: Boolean Operations - Prevent modification of the input shapes in case their sub-shapes have not been modified
2017-11-30 12:11:20 +03:00
bug29387
0029387: Incorrect result of cut a face with several shapes
2017-12-26 19:06:10 +03:00
bug29400
0029400: Fuse of two edges creates self-interfered shape
2017-12-25 11:47:53 +03:00
bug29430
0029430: [Regression] Curve evaluation at boundary point.
2018-01-17 16:44:57 +03:00
bug29484
0029484: Avoid inheritance of the BRepAlgoAPI_Check from BRepBuilderAPI_MakeShape
2018-02-06 18:57:01 +03:00
bug29488_1
0029494: Intersection line between two parametric surfaces is restricted incorrectly if it matches the surface boundary
2018-02-16 15:09:10 +03:00
bug29488_2
0029494: Intersection line between two parametric surfaces is restricted incorrectly if it matches the surface boundary
2018-02-16 15:09:10 +03:00
bug29494
0029494: Intersection line between two parametric surfaces is restricted incorrectly if it matches the surface boundary
2018-02-16 15:09:10 +03:00
bug29496
0029496: No intersection curve between faces if starting points are given
2018-02-16 15:07:01 +03:00
bug29502
0029502: Improve performance of the ShapeUpgrade_UnifySameDomain::UnifyEdges() method
2018-02-15 16:51:46 +03:00
bug29511
0029511: Section fails for these two faces
2018-06-14 14:03:08 +03:00
bug29524
0029868: Draw Harness - help message for readstl command is unclear
2018-07-06 15:53:48 +03:00
bug29535
0029535: Modeling Algorithms - BRepExtrema_DistShapeShape returns only one solution but the wires have two intersections
2018-03-16 14:57:01 +03:00
bug29544_1
0029544: Regression vs 7.2.0: ShapeUpgrade_UnifySameDomain fails to merge linear edges
2018-03-16 14:56:16 +03:00
bug29544_2
0029544: Regression vs 7.2.0: ShapeUpgrade_UnifySameDomain fails to merge linear edges
2018-03-16 14:56:16 +03:00
bug29573
0029573: ConcatenateWireC0 crashes on two edges wire
2018-07-30 18:39:01 +03:00
bug29580_1
0029646: Boolean Operations algorithm produces a face with self-intersecting wire
2018-03-29 17:13:12 +03:00
bug29580_2
0029586: Revolution creates solid with degenerated edges shared among faces
2018-06-14 14:03:03 +03:00
bug29586
0029586: Revolution creates solid with degenerated edges shared among faces
2018-06-14 14:03:03 +03:00
bug29606
0029606: [Regression vs 7.0] BRepClass3d_SolidClassifier classifies the point as IN while it is ON
2018-04-02 16:36:31 +03:00
bug29627
0029627: BRepOffsetAPI_NormalProjection class changes orientation of the result
2018-03-23 13:09:50 +03:00
bug29655
0029655: [Regression to 6.9.1] Distance between cylinder and straight line
2018-05-23 06:02:39 +03:00
bug29663
0029663: Exception in BRepFill_PipeShell algorithm
2018-04-09 11:07:32 +03:00
bug29688
0029688: Regression vs 7.2.0: Wrong result of CUT operation
2018-04-12 12:40:07 +03:00
bug29698
0029698: Regression vs 7.2.0: Common operation raises FLT_INVALID_OPERATION exception
2018-05-23 05:44:12 +03:00
bug29701_1
0029701: BRepTools::Update(Face) unexpectedly updates UV points of pcurve
2018-05-23 06:39:49 +03:00
bug29701_2
0029701: BRepTools::Update(Face) unexpectedly updates UV points of pcurve
2018-05-23 06:39:49 +03:00
bug29701_3
0029701: BRepTools::Update(Face) unexpectedly updates UV points of pcurve
2018-05-23 06:39:49 +03:00
bug29711
0029711: General Fuse operation produces invalid result
2018-07-27 16:19:15 +03:00
bug29712_1
0029712: Extrema algorithm raises exception
2018-06-14 14:03:05 +03:00
bug29731
0029734: Modeling Algorithms - Compute global properties of tessellated shape
2018-06-23 13:12:36 +03:00
bug29734
0029734: Modeling Algorithms - Compute global properties of tessellated shape
2018-06-23 13:12:36 +03:00
bug29807_b1
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_b2
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_b3a
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_b3b
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_b4a
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_b4b
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_b5a
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_b5b
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_i1001
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_i1002
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_i1003
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_i1004
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_i1005
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_i1006
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_i2001
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_i2002
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_i2003
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_i2004
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_i2005
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_i2006
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_i3001
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_i3002
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_i3003
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_i3004
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_i3005
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_i4001
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_i4002
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_i4003
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_i4004
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_i4005
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_i5001
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_i5002
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_sc01
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_svm01
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_svm02
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29813_1
0029813: BRepFill_PipeShell algorithm produces invalid result
2018-06-14 14:03:08 +03:00
bug29813_2
0029813: BRepFill_PipeShell algorithm produces invalid result
2018-06-14 14:03:08 +03:00
bug29813_3
0029813: BRepFill_PipeShell algorithm produces invalid result
2018-06-14 14:03:08 +03:00
bug29824
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29845
0029845: UnifySameDomain does not account the accumulated angle when unifying edges
2018-06-14 14:03:12 +03:00
bug29857
0029857: Incorrect behavior of Point-Curve Extrema
2018-06-29 12:11:45 +03:00
bug29857_1
0029857: Incorrect behavior of Point-Curve Extrema
2018-06-29 12:11:45 +03:00
bug29861
0029861: Modeling Algorithms - BiTgte_Blend gives exception
2018-07-20 16:58:12 +03:00
bug29866
0029866: Intersector returns two overlapped curves as a result
2018-07-13 15:05:03 +03:00
bug29887_1
0029887: Wrong result of CUT operation due to incorrect point-face classification
2018-06-23 13:34:38 +03:00
bug29887_2
0029887: Wrong result of CUT operation due to incorrect point-face classification
2018-06-23 13:34:38 +03:00
bug29900
0029711: General Fuse operation produces invalid result
2018-07-27 16:19:15 +03:00
bug29939
0029939: Modeling Algorithms - add NULL check to BRepGProp_Face::Load()
2018-07-13 15:03:55 +03:00
bug29955
0029955: Face and Solid BOP: Building 2D curve of edge on face has failed
2018-07-27 16:18:20 +03:00
bug29968
0029968: Modeling Algorithms - BRepAlgoAPI_Cut produces an empty result with half-space
2018-07-20 17:15:53 +03:00
bug29973_1
0029973: Modeling Algorithms - access violation within BRepAlgoAPI_Cut on empty input shape
2018-07-27 16:19:20 +03:00
bug29973_2
0029973: Modeling Algorithms - access violation within BRepAlgoAPI_Cut on empty input shape
2018-07-27 16:19:20 +03:00