OpenCascade/occt
1
0
Fork 0
mirror of https://git.dev.opencascade.org/repos/occt.git synced 2025-06-20 11:54:07 +03:00
Code
occt/tests/bugs/modalg_6
History
abv 61b0059a45 0026647: BRepTools::UVBounds() computes zero range by V 
Calculation of bounding box on conic 2d curves corrected to work properly if specified parametric range is in negative values.

Test case added
2015-09-11 17:29:26 +03:00
..
begin
0021821: Section of face by plane is not built due to small edges
2015-04-16 14:10:25 +03:00
bug7093
0007093: BRepLib::SameParameter() changes tolerance of shape, not involved into operation
2015-04-06 17:24:47 +03:00
bug21351
0021351: Fail to compute derivatives of offset surface on trimmed surfaces on offsets on CN surfaces
2015-04-23 16:29:58 +03:00
bug21507
0021507: Bug in BOP: bcut produces invalid result without notice
2015-04-16 16:29:48 +03:00
bug21624
0021624: BRepFeat_SplitShape produce invalid shape
2015-04-23 16:34:15 +03:00
bug21727
0021727: BRepBuilderAPI_Copy (and possibly other similar tools) create new shape in Frozen state
2015-04-30 14:11:07 +03:00
bug21821
0021821: Section of face by plane is not built due to small edges
2015-04-16 14:10:25 +03:00
bug22644_1
0022644: Incorrect result of Boolean operations (Fuse, Cut, Common)
2015-04-16 16:37:34 +03:00
bug22644_2
0022644: Incorrect result of Boolean operations (Fuse, Cut, Common)
2015-04-16 16:37:34 +03:00
bug22644_3
0022644: Incorrect result of Boolean operations (Fuse, Cut, Common)
2015-04-16 16:37:34 +03:00
bug22793
Correction of test-cases according to OCC23150 requirements (new format of checknbshapes command).
2015-04-24 14:56:15 +03:00
bug23138
0023138: BRepAlgoAPI_Fuse produce invalid result
2015-04-16 16:34:01 +03:00
bug24011
0024011: Can't offset a wire on face
2015-04-23 16:38:53 +03:00
bug24161
0024161: boolean operation hanging
2015-04-30 13:58:51 +03:00
bug24803
0024803: improve the result of v/v interference for two vertices case
2015-04-09 16:28:55 +03:00
bug25271
0025271: Wrong result obtained by solid classifier algorithm
2015-05-08 08:51:46 +03:00
bug25593
0025593: Number of intersection points for 2d curves depends on the order of arguments in command "2dintersect"
2015-04-16 10:34:12 +03:00
bug25613_1
0025613: Wrong distance found by xdistef command for attached shapes
2015-09-02 14:38:07 +03:00
bug25613_2
0025613: Wrong distance found by xdistef command for attached shapes
2015-09-02 14:38:07 +03:00
bug25820_1
0025820: No Intersection Curves between surface of revolution and planes
2015-09-02 14:39:20 +03:00
bug25820_2
0025820: No Intersection Curves between surface of revolution and planes
2015-09-02 14:39:20 +03:00
bug25820_3
0025820: No Intersection Curves between surface of revolution and planes
2015-09-02 14:39:20 +03:00
bug25844
0025844: Command checkshape does not detect error for case when degenerated edge does not contain geometric representation.
2015-05-06 16:44:28 +03:00
bug25880
0025880: fuzzy booleans with multiple tools
2015-04-30 14:42:59 +03:00
bug25890
0025890: Intersection algorithm produces curves overlaped
2015-05-08 08:51:43 +03:00
bug25908
Extract of fixes from 0024682: Move out B-spline cache from curves and surfaces to dedicated classes BSplCLib_Cache and BSplSLib_Cache
2015-08-23 23:21:30 +03:00
bug25937_1
0025937: Failed Cut Edge or Face by HalfSpace.
2015-04-30 13:51:04 +03:00
bug25937_2
0025937: Failed Cut Edge or Face by HalfSpace.
2015-04-30 13:51:04 +03:00
bug25937_3
0025937: Failed Cut Edge or Face by HalfSpace.
2015-04-30 13:51:04 +03:00
bug26008
0026008: Wrong intersection 2D-curves obtained for pair of faces.
2015-04-09 16:12:05 +03:00
bug26010
0026010: [OCCT 6.8.0 regression] BRepFeat_SplitShape returns invalid shapes
2015-05-06 16:48:29 +03:00
bug26016
0026016: BRepPrimAPI_MakeRevol crash
2015-04-09 15:05:42 +03:00
bug26041
0026041: GeomLib_Tool::Parameter method fails
2015-04-16 11:30:11 +03:00
bug26063
0026063: GeomAPI_ExtremaCurveSurface have inexact API
2015-08-21 10:59:15 +03:00
bug26064
0026064: distmini of two edges locks up
2015-04-30 13:19:23 +03:00
bug26075
0026075: Make Extrema_GenExtCC return IsParallel flag in case of parallel curves
2015-09-03 01:56:53 +03:00
bug26080
Correction of test-cases according to OCC23150 requirements (new format of checknbshapes command).
2015-04-24 14:56:15 +03:00
bug26098
0026098: The result of General Fuse operation is self-interfered shape
2015-04-23 17:00:57 +03:00
bug26112
0026112: Exception is raised during perform of General Fuse operation
2015-04-30 13:33:11 +03:00
bug26130
0026130: PCurve creation failure
2015-04-30 14:34:11 +03:00
bug26151_1
0026151: Wrong result obtained by intersection algorithm.
2015-08-23 23:23:32 +03:00
bug26151_2
0026151: Wrong result obtained by intersection algorithm.
2015-08-23 23:23:32 +03:00
bug26152_1
0026152: Wrong result obtained by projection algorithm.
2015-04-30 14:37:40 +03:00
bug26152_2
0026152: Wrong result obtained by projection algorithm.
2015-04-30 14:37:40 +03:00
bug26180
0026180: Modeling Algorithms - Provide shape self-intersection detector
2015-08-21 10:59:11 +03:00
bug26185_1
0026185: BRepOffsetAPI_MakeOffset: regressions on some customer's cases
2015-08-23 23:23:20 +03:00
bug26185_2
0026185: BRepOffsetAPI_MakeOffset: regressions on some customer's cases
2015-08-23 23:23:20 +03:00
bug26185_3
0026185: BRepOffsetAPI_MakeOffset: regressions on some customer's cases
2015-08-23 23:23:20 +03:00
bug26185_4
0026185: BRepOffsetAPI_MakeOffset: regressions on some customer's cases
2015-08-23 23:23:20 +03:00
bug26185_5
0026185: BRepOffsetAPI_MakeOffset: regressions on some customer's cases
2015-08-23 23:23:20 +03:00
bug26185_6
0026185: BRepOffsetAPI_MakeOffset: regressions on some customer's cases
2015-08-23 23:23:20 +03:00
bug26185_7
0026185: BRepOffsetAPI_MakeOffset: regressions on some customer's cases
2015-08-23 23:23:20 +03:00
bug26193
0026193: Incomplete intersection curve
2015-08-23 23:23:26 +03:00
bug26197
0026197: Incomplete intersection curve
2015-08-21 10:58:59 +03:00
bug26201
0026201: Wrong processing of dissymetric chamfer: order of chords unjustly changes
2015-08-21 10:59:02 +03:00
bug26202
0026202: Wrong result of chamfer on cylindrical surface: wrong value of chord
2015-08-21 10:58:51 +03:00
bug26206
0026206: BRepClass_FaceClassifier returns TopAbs_OUT for internal point
2015-08-23 23:23:29 +03:00
bug26208
0026193: Incomplete intersection curve
2015-08-23 23:23:26 +03:00
bug26218
0026218: Wrong result done by General Fuse algorithm
2015-08-21 10:58:55 +03:00
bug26224
0026224: Wrong result obtained by Common operator.
2015-08-21 10:58:56 +03:00
bug26233
0026233: BRepOffset_MakeOffset makes incorrect result
2015-08-23 23:23:24 +03:00
bug26241
0026241: Sewing algorithm computes tolerance of joint vertex too rough
2015-09-02 14:39:51 +03:00
bug26243_1
0026243: Boolean operations failed on shapes with fillets
2015-09-02 14:38:50 +03:00
bug26243_2
0026243: Boolean operations failed on shapes with fillets
2015-09-02 14:38:50 +03:00
bug26243_3
0026243: Boolean operations failed on shapes with fillets
2015-09-02 14:38:50 +03:00
bug26251
0026251: Section curve cannot be found
2015-09-03 01:56:22 +03:00
bug26253
0026253: Wrong result obtained by General Fuse operator.
2015-08-23 23:23:19 +03:00
bug26281_1
0026281: BRepCheck_Edge::Tolerance() raises exception on the given shapes
2015-08-23 23:23:25 +03:00
bug26281_2
0026281: BRepCheck_Edge::Tolerance() raises exception on the given shapes
2015-08-23 23:23:25 +03:00
bug26296_1
0026296: Errors in BRepOffsetAPI_MakeOffset: failure because of wrong direction of bisector.
2015-09-02 14:38:01 +03:00
bug26296_2
0026296: Errors in BRepOffsetAPI_MakeOffset: failure because of wrong direction of bisector.
2015-09-02 14:38:01 +03:00
bug26296_3
0026296: Errors in BRepOffsetAPI_MakeOffset: failure because of wrong direction of bisector.
2015-09-02 14:38:01 +03:00
bug26296_4
0026296: Errors in BRepOffsetAPI_MakeOffset: failure because of wrong direction of bisector.
2015-09-02 14:38:01 +03:00
bug26296_5
0026296: Errors in BRepOffsetAPI_MakeOffset: failure because of wrong direction of bisector.
2015-09-02 14:38:01 +03:00
bug26305_1
0026305: BRepFeat_MakePrism returns inconsistent results && 026315: BRepFeat_MakeRevol fails to create revol from shape
2015-09-02 14:32:40 +03:00
bug26305_2
0026305: BRepFeat_MakePrism returns inconsistent results && 026315: BRepFeat_MakeRevol fails to create revol from shape
2015-09-02 14:32:40 +03:00
bug26305_3
0026305: BRepFeat_MakePrism returns inconsistent results && 026315: BRepFeat_MakeRevol fails to create revol from shape
2015-09-02 14:32:40 +03:00
bug26308
Adjustment of test cases
2015-09-02 14:39:26 +03:00
bug26310_1
0026310: Very slow boolean cut operations on cylinders
2015-09-02 14:39:52 +03:00
bug26310_2
0026310: Very slow boolean cut operations on cylinders
2015-09-02 14:39:52 +03:00
bug26310_3
0026310: Very slow boolean cut operations on cylinders
2015-09-02 14:39:52 +03:00
bug26310_4
0026310: Very slow boolean cut operations on cylinders
2015-09-02 14:39:52 +03:00
bug26315
0026305: BRepFeat_MakePrism returns inconsistent results && 026315: BRepFeat_MakeRevol fails to create revol from shape
2015-09-02 14:32:40 +03:00
bug26316
0026316: Infinite modification of the shapes in General Fuse operation
2015-09-02 14:37:55 +03:00
bug26330
0026330: BRepOffsetAPI_ThruSections creates invalid shape
2015-09-02 14:37:57 +03:00
bug26332
0026332: BRepOffsetAPI_ThruSections algorithm fails on two wires with different number of edges
2015-09-02 14:38:02 +03:00
bug26356
0026356: Wrong result done by projection algorithm
2015-09-02 14:38:08 +03:00
bug26379_1
0026379: Wrong result produced by the volume maker algorithm
2015-09-02 14:38:09 +03:00
bug26379_2
0026379: Wrong result produced by the volume maker algorithm
2015-09-02 14:38:09 +03:00
bug26387
0026387: BRepPrimAPI_MakePrism crash when extruding Paraboloid face.
2015-09-02 14:38:16 +03:00
bug26393
0026393: Add draw commands to evaluate history of modifications of BOP
2015-09-02 14:38:27 +03:00
bug26406
0026406: BRepPrimAPI_MakeRevol crash when rotating Paraboloid face.
2015-09-02 14:38:17 +03:00
bug26418_1
0026418: Unjustified limitation on tolerance of a input shape in BRepOffset_MakeOffset
2015-09-02 14:38:22 +03:00
bug26418_2
0026418: Unjustified limitation on tolerance of a input shape in BRepOffset_MakeOffset
2015-09-02 14:38:22 +03:00
bug26418_3
0026418: Unjustified limitation on tolerance of a input shape in BRepOffset_MakeOffset
2015-09-02 14:38:22 +03:00
bug26418_4
0026418: Unjustified limitation on tolerance of a input shape in BRepOffset_MakeOffset
2015-09-02 14:38:22 +03:00
bug26420_1
0026420: BOPAlgo_Builder resets "Closed" flag in the result
2015-09-02 14:38:37 +03:00
bug26420_2
0026420: BOPAlgo_Builder resets "Closed" flag in the result
2015-09-02 14:38:37 +03:00
bug26420_3
0026420: BOPAlgo_Builder resets "Closed" flag in the result
2015-09-02 14:38:37 +03:00
bug26442_1
0026442: Access violation in BRepOffset_MakeOffset
2015-09-02 14:38:49 +03:00
bug26442_2
0026442: Access violation in BRepOffset_MakeOffset
2015-09-02 14:38:49 +03:00
bug26444
0026444: Boolean operation "bcut" gives invalid result between solid and halfspace solid.
2015-09-02 14:38:36 +03:00
bug26446
Add test case for #26446
2015-09-02 14:39:19 +03:00
bug26447
0026447: Performance degradation intersecting cylindrical surfaces
2015-09-02 14:39:22 +03:00
bug26464
026464: BRepOffset_MakeOffset does not provide valid output
2015-09-02 14:38:42 +03:00
bug26466
0026466: UnifySameDomain creates invalid result shape from valid input shape
2015-09-02 14:38:28 +03:00
bug26473_1
0026473: Offset API fails to create offset shape
2015-09-02 14:38:38 +03:00
bug26473_2
0026473: Offset API fails to create offset shape
2015-09-02 14:38:38 +03:00
bug26481
0026540: Errors in BRepOffsetAPI_MakeOffset: infinite loop in method FixHoles for closed results.
2015-09-02 14:39:09 +03:00
bug26484
0026484: BRepExtrema_DistShapeShape hangs
2015-09-02 14:38:39 +03:00
bug26496
0026496: Error in use the BRepCheck_Analyzer
2015-09-02 14:38:45 +03:00
bug26540
0026540: Errors in BRepOffsetAPI_MakeOffset: infinite loop in method FixHoles for closed results.
2015-09-02 14:39:09 +03:00
bug26553
0026553: Out of range exception in BRepFill_Pipe::FindEdge
2015-09-02 14:39:17 +03:00
bug26554
0026554: Error in IntPatch_PrmPrmIntersection: initial step for walking line is not related with actual tolerance
2015-09-02 14:39:15 +03:00
bug26582
0026582: Wrong result obtained by Common operator
2015-09-11 15:22:55 +03:00
bug26647
0026647: BRepTools::UVBounds() computes zero range by V
2015-09-11 17:29:26 +03:00