OpenCascade/occt
1
0
Fork 0
mirror of https://git.dev.opencascade.org/repos/occt.git synced 2025-08-09 13:22:24 +03:00
Code Activity
Files
420f79f8bcac33bc927bf2a09650f68db8d7f745
occt/tests/bugs/modalg_6
History
jgv 420f79f8bc 0026681: BRepPrimAPI_MakeRevol creates faulty shape 
Correction according to remarks

More precise processing of non-SameParameter edges

Correction of mistake

Test cases for issue CR26681
2015-11-19 14:22:54 +03:00
..
begin
0021821: Section of face by plane is not built due to small edges
2015-04-16 14:10:25 +03:00
bug7093
0007093: BRepLib::SameParameter() changes tolerance of shape, not involved into operation
2015-04-06 17:24:47 +03:00
bug21107
0021107: The computed section is incomplete
2015-10-29 12:13:15 +03:00
bug21351
0021351: Fail to compute derivatives of offset surface on trimmed surfaces on offsets on CN surfaces
2015-04-23 16:29:58 +03:00
bug21507
0021507: Bug in BOP: bcut produces invalid result without notice
2015-04-16 16:29:48 +03:00
bug21624
0021624: BRepFeat_SplitShape produce invalid shape
2015-04-23 16:34:15 +03:00
bug21727
0021727: BRepBuilderAPI_Copy (and possibly other similar tools) create new shape in Frozen state
2015-04-30 14:11:07 +03:00
bug21821
0021821: Section of face by plane is not built due to small edges
2015-04-16 14:10:25 +03:00
bug22644_1
0022644: Incorrect result of Boolean operations (Fuse, Cut, Common)
2015-04-16 16:37:34 +03:00
bug22644_2
0022644: Incorrect result of Boolean operations (Fuse, Cut, Common)
2015-04-16 16:37:34 +03:00
bug22644_3
0022644: Incorrect result of Boolean operations (Fuse, Cut, Common)
2015-04-16 16:37:34 +03:00
bug22793
Correction of test-cases according to OCC23150 requirements (new format of checknbshapes command).
2015-04-24 14:56:15 +03:00
bug23138
0023138: BRepAlgoAPI_Fuse produce invalid result
2015-04-16 16:34:01 +03:00
bug24011
0024011: Can't offset a wire on face
2015-04-23 16:38:53 +03:00
bug24097
0024097: BRepAlgoAPI_Section returns wrong result
2015-09-10 14:58:06 +03:00
bug24161
0024161: boolean operation hanging
2015-04-30 13:58:51 +03:00
bug24357
0026241: Sewing algorithm computes tolerance of joint vertex too rough
2015-06-18 14:04:52 +03:00
bug24803
0024803: improve the result of v/v interference for two vertices case
2015-04-09 16:28:55 +03:00
bug24890
0024890: Result of uniform scaling is invalid
2015-11-19 14:15:15 +03:00
bug25271
0025271: Wrong result obtained by solid classifier algorithm
2015-05-08 08:51:46 +03:00
bug25593
0025593: Number of intersection points for 2d curves depends on the order of arguments in command "2dintersect"
2015-04-16 10:34:12 +03:00
bug25613_1
0025613: Wrong distance found by xdistef command for attached shapes
2015-07-03 13:39:37 +03:00
bug25613_2
0025613: Wrong distance found by xdistef command for attached shapes
2015-07-03 13:39:37 +03:00
bug25820_1
0026622: Tests - Avoid using dlog and decho commands in test scripts
2015-10-15 11:43:54 +03:00
bug25820_2
0026622: Tests - Avoid using dlog and decho commands in test scripts
2015-10-15 11:43:54 +03:00
bug25820_3
0026622: Tests - Avoid using dlog and decho commands in test scripts
2015-10-15 11:43:54 +03:00
bug25844
0026622: Tests - Avoid using dlog and decho commands in test scripts
2015-10-15 11:43:54 +03:00
bug25880
0025880: fuzzy booleans with multiple tools
2015-04-30 14:42:59 +03:00
bug25890
0025890: Intersection algorithm produces curves overlaped
2015-05-08 08:51:43 +03:00
bug25908
0024682: Move out B-spline cache from curves and surfaces to dedicated classes BSplCLib_Cache and BSplSLib_Cache
2015-05-28 13:38:22 +03:00
bug25937_1
0025937: Failed Cut Edge or Face by HalfSpace.
2015-04-30 13:51:04 +03:00
bug25937_2
0026565: Compsolid after cut becomes compound of solids
2015-10-01 14:49:29 +03:00
bug25937_3
0025937: Failed Cut Edge or Face by HalfSpace.
2015-04-30 13:51:04 +03:00
bug26008
0026008: Wrong intersection 2D-curves obtained for pair of faces.
2015-04-09 16:12:05 +03:00
bug26010
0026010: [OCCT 6.8.0 regression] BRepFeat_SplitShape returns invalid shapes
2015-05-06 16:48:29 +03:00
bug26016
0026016: BRepPrimAPI_MakeRevol crash
2015-04-09 15:05:42 +03:00
bug26041
0026041: GeomLib_Tool::Parameter method fails
2015-04-16 11:30:11 +03:00
bug26063
0026063: GeomAPI_ExtremaCurveSurface have inexact API
2015-05-28 12:45:17 +03:00
bug26064
0026064: distmini of two edges locks up
2015-04-30 13:19:23 +03:00
bug26075
0026075: Make Extrema_GenExtCC return IsParallel flag in case of parallel curves
2015-06-04 14:14:52 +03:00
bug26080
Correction of test-cases according to OCC23150 requirements (new format of checknbshapes command).
2015-04-24 14:56:15 +03:00
bug26098
0026098: The result of General Fuse operation is self-interfered shape
2015-04-23 17:00:57 +03:00
bug26099
0026099: Wrong result done by 2d intersection algorithm
2015-09-17 12:47:07 +03:00
bug26112
0026112: Exception is raised during perform of General Fuse operation
2015-04-30 13:33:11 +03:00
bug26130
0026130: PCurve creation failure
2015-04-30 14:34:11 +03:00
bug26151_1
0026151: Wrong result obtained by intersection algorithm.
2015-06-10 10:39:34 +03:00
bug26151_2
0026151: Wrong result obtained by intersection algorithm.
2015-06-10 10:39:34 +03:00
bug26152_1
0026152: Wrong result obtained by projection algorithm.
2015-04-30 14:37:40 +03:00
bug26152_2
0026152: Wrong result obtained by projection algorithm.
2015-04-30 14:37:40 +03:00
bug26173
0026173: Wrong result of ChFi3d_ChBuilder algorithm: incorrect processing of G1 junctions at vertex
2015-09-10 15:31:53 +03:00
bug26180
0026180: Modeling Algorithms - Provide shape self-intersection detector
2015-05-28 12:19:25 +03:00
bug26185_1
0026185: BRepOffsetAPI_MakeOffset: regressions on some customer's cases
2015-05-28 15:26:35 +03:00
bug26185_2
0026185: BRepOffsetAPI_MakeOffset: regressions on some customer's cases
2015-05-28 15:26:35 +03:00
bug26185_3
0026185: BRepOffsetAPI_MakeOffset: regressions on some customer's cases
2015-05-28 15:26:35 +03:00
bug26185_4
0026185: BRepOffsetAPI_MakeOffset: regressions on some customer's cases
2015-05-28 15:26:35 +03:00
bug26185_5
0026185: BRepOffsetAPI_MakeOffset: regressions on some customer's cases
2015-05-28 15:26:35 +03:00
bug26185_6
0026185: BRepOffsetAPI_MakeOffset: regressions on some customer's cases
2015-05-28 15:26:35 +03:00
bug26185_7
0026185: BRepOffsetAPI_MakeOffset: regressions on some customer's cases
2015-05-28 15:26:35 +03:00
bug26193
0026193: Incomplete intersection curve
2015-06-04 14:06:34 +03:00
bug26196
0026196: Wrong result obtained by projection algorithm.
2015-09-17 17:11:34 +03:00
bug26197
0026197: Incomplete intersection curve
2015-05-21 13:48:48 +03:00
bug26201
0026201: Wrong processing of dissymetric chamfer: order of chords unjustly changes
2015-05-21 13:57:51 +03:00
bug26202
0026202: Wrong result of chamfer on cylindrical surface: wrong value of chord
2015-05-14 17:05:38 +03:00
bug26206
0026206: BRepClass_FaceClassifier returns TopAbs_OUT for internal point
2015-06-04 14:35:36 +03:00
bug26208
0026193: Incomplete intersection curve
2015-06-04 14:06:34 +03:00
bug26218
0026218: Wrong result done by General Fuse algorithm
2015-05-21 12:52:49 +03:00
bug26224
0026565: Compsolid after cut becomes compound of solids
2015-10-01 14:49:29 +03:00
bug26233
0026233: BRepOffset_MakeOffset makes incorrect result
2015-06-04 12:41:48 +03:00
bug26241
0026241: Sewing algorithm computes tolerance of joint vertex too rough
2015-06-18 14:04:52 +03:00
bug26243_1
0026243: Boolean operations failed on shapes with fillets
2015-08-06 12:28:29 +03:00
bug26243_2
0026243: Boolean operations failed on shapes with fillets
2015-08-06 12:28:29 +03:00
bug26243_3
0026243: Boolean operations failed on shapes with fillets
2015-08-06 12:28:29 +03:00
bug26251
0026251: Section curve cannot be found
2015-09-03 14:55:18 +03:00
bug26253
0026253: Wrong result obtained by General Fuse operator.
2015-05-28 15:23:03 +03:00
bug26281_1
0026281: BRepCheck_Edge::Tolerance() raises exception on the given shapes
2015-06-04 14:03:08 +03:00
bug26281_2
0026281: BRepCheck_Edge::Tolerance() raises exception on the given shapes
2015-06-04 14:03:08 +03:00
bug26288
0026288: Offset on faces with opposite orientation
2015-09-10 16:22:45 +03:00
bug26296_1
0026296: Errors in BRepOffsetAPI_MakeOffset: failure because of wrong direction of bisector.
2015-07-02 13:40:52 +03:00
bug26296_2
0026296: Errors in BRepOffsetAPI_MakeOffset: failure because of wrong direction of bisector.
2015-07-02 13:40:52 +03:00
bug26296_3
0026296: Errors in BRepOffsetAPI_MakeOffset: failure because of wrong direction of bisector.
2015-07-02 13:40:52 +03:00
bug26296_4
0026296: Errors in BRepOffsetAPI_MakeOffset: failure because of wrong direction of bisector.
2015-07-02 13:40:52 +03:00
bug26296_5
0026296: Errors in BRepOffsetAPI_MakeOffset: failure because of wrong direction of bisector.
2015-07-02 13:40:52 +03:00
bug26305_1
0026305: BRepFeat_MakePrism returns inconsistent results && 026315: BRepFeat_MakeRevol fails to create revol from shape
2015-06-18 13:37:13 +03:00
bug26305_2
0026305: BRepFeat_MakePrism returns inconsistent results && 026315: BRepFeat_MakeRevol fails to create revol from shape
2015-06-18 13:37:13 +03:00
bug26305_3
0026305: BRepFeat_MakePrism returns inconsistent results && 026315: BRepFeat_MakeRevol fails to create revol from shape
2015-06-18 13:37:13 +03:00
bug26308
0026308: Segmentation fault in BSplCLib::LocateParameter
2015-07-20 15:24:00 +03:00
bug26310_1
0026310: Very slow boolean cut operations on cylinders
2015-07-22 16:11:31 +03:00
bug26310_2
0026310: Very slow boolean cut operations on cylinders
2015-07-22 16:11:31 +03:00
bug26310_3
0026310: Very slow boolean cut operations on cylinders
2015-07-22 16:11:31 +03:00
bug26310_4
0021564: Intersection of two planar faces produces curve with too many poles
2015-08-13 11:04:48 +03:00
bug26313
0026313: Method BRepBuilderAPI_GTransform::ModifiedShape(...) thows exception
2015-09-10 16:19:23 +03:00
bug26315
0026305: BRepFeat_MakePrism returns inconsistent results && 026315: BRepFeat_MakeRevol fails to create revol from shape
2015-06-18 13:37:13 +03:00
bug26316
0026316: Infinite modification of the shapes in General Fuse operation
2015-06-25 12:51:30 +03:00
bug26330
0026330: BRepOffsetAPI_ThruSections creates invalid shape
2015-06-25 13:10:30 +03:00
bug26332
0026332: BRepOffsetAPI_ThruSections algorithm fails on two wires with different number of edges
2015-07-02 13:47:37 +03:00
bug26352
0026352: Wrong intersection points found
2015-07-02 14:28:55 +03:00
bug26356
0026356: Wrong result done by projection algorithm
2015-07-09 14:14:55 +03:00
bug26379_1
0026379: Wrong result produced by the volume maker algorithm
2015-07-09 14:20:02 +03:00
bug26379_2
0026379: Wrong result produced by the volume maker algorithm
2015-07-09 14:20:02 +03:00
bug26387
0026387: BRepPrimAPI_MakePrism crash when extruding Paraboloid face.
2015-07-20 14:08:18 +03:00
bug26393
0026393: Add draw commands to evaluate history of modifications of BOP
2015-07-28 17:59:13 +03:00
bug26396
0026396: Taper API result differs run-to-run for identical inputs
2015-10-08 10:35:08 +03:00
bug26406
0026406: BRepPrimAPI_MakeRevol crash when rotating Paraboloid face.
2015-07-20 15:01:16 +03:00
bug26418_1
0026418: Unjustified limitation on tolerance of a input shape in BRepOffset_MakeOffset
2015-07-21 11:20:27 +03:00
bug26418_2
0026418: Unjustified limitation on tolerance of a input shape in BRepOffset_MakeOffset
2015-07-21 11:20:27 +03:00
bug26418_3
0026418: Unjustified limitation on tolerance of a input shape in BRepOffset_MakeOffset
2015-07-21 11:20:27 +03:00
bug26418_4
0026418: Unjustified limitation on tolerance of a input shape in BRepOffset_MakeOffset
2015-07-21 11:20:27 +03:00
bug26420_1
0026420: BOPAlgo_Builder resets "Closed" flag in the result
2015-07-29 15:30:42 +03:00
bug26420_2
0026420: BOPAlgo_Builder resets "Closed" flag in the result
2015-07-29 15:30:42 +03:00
bug26420_3
0026420: BOPAlgo_Builder resets "Closed" flag in the result
2015-07-29 15:30:42 +03:00
bug26426
0026426: Draft angle algorithm modifies input argument + the result of the operation have very large tolerance values
2015-10-29 13:36:17 +03:00
bug26440_1
0026440: Invalid shape as a result of solid construction in BRepOffset_MakeOffset
2015-09-03 14:41:19 +03:00
bug26440_2
0026440: Invalid shape as a result of solid construction in BRepOffset_MakeOffset
2015-09-03 14:41:19 +03:00
bug26440_3
0026440: Invalid shape as a result of solid construction in BRepOffset_MakeOffset
2015-09-03 14:41:19 +03:00
bug26442_1
0026442: Access violation in BRepOffset_MakeOffset
2015-08-06 12:23:59 +03:00
bug26442_2
0026442: Access violation in BRepOffset_MakeOffset
2015-08-06 12:23:59 +03:00
bug26443_1
0026443: Offset surface hangs up
2015-10-15 14:16:14 +03:00
bug26443_2
0026443: Offset surface hangs up
2015-10-15 14:16:14 +03:00
bug26444
0026444: Boolean operation "bcut" gives invalid result between solid and halfspace solid.
2015-07-29 15:25:01 +03:00
bug26446
Adjusting testing case
2015-08-21 13:19:25 +03:00
bug26447
0026447: Performance degradation intersecting cylindrical surfaces
2015-07-30 13:52:38 +03:00
bug26464
026464: BRepOffset_MakeOffset does not provide valid output
2015-07-29 16:15:25 +03:00
bug26466
0026466: UnifySameDomain creates invalid result shape from valid input shape
2015-07-28 17:59:16 +03:00
bug26470_1
0026470: BRepFill_Evolved: exception and invalid result
2015-10-22 15:43:33 +03:00
bug26470_2
0026470: BRepFill_Evolved: exception and invalid result
2015-10-22 15:43:33 +03:00
bug26473_1
0026473: Offset API fails to create offset shape
2015-07-29 15:34:24 +03:00
bug26473_2
0026473: Offset API fails to create offset shape
2015-07-29 15:34:24 +03:00
bug26481
0026540: Errors in BRepOffsetAPI_MakeOffset: infinite loop in method FixHoles for closed results.
2015-08-13 11:16:09 +03:00
bug26484
0026484: BRepExtrema_DistShapeShape hangs
2015-07-29 16:04:54 +03:00
bug26496
0026496: Error in use the BRepCheck_Analyzer
2015-07-30 12:40:05 +03:00
bug26498
0026498: BRepOffsetAPI_MakeOffset causes segmentation fault
2015-08-27 15:30:15 +03:00
bug26525_1
0026525: Wrong result obtained by curve / surface intersection algorithm.
2015-09-24 14:14:57 +03:00
bug26525_2
0026525: Wrong result obtained by curve / surface intersection algorithm.
2015-09-24 14:14:57 +03:00
bug26525_3
0026525: Wrong result obtained by curve / surface intersection algorithm.
2015-09-24 14:14:57 +03:00
bug26525_4
0026525: Wrong result obtained by curve / surface intersection algorithm.
2015-09-24 14:14:57 +03:00
bug26540
0026540: Errors in BRepOffsetAPI_MakeOffset: infinite loop in method FixHoles for closed results.
2015-08-13 11:16:09 +03:00
bug26553
0026553: Out of range exception in BRepFill_Pipe::FindEdge
2015-08-20 16:43:39 +03:00
bug26554
0026554: Error in IntPatch_PrmPrmIntersection: initial step for walking line is not related with actual tolerance
2015-08-20 16:39:28 +03:00
bug26556_1
0026622: Tests - Avoid using dlog and decho commands in test scripts
2015-10-15 11:43:54 +03:00
bug26556_2
0026622: Tests - Avoid using dlog and decho commands in test scripts
2015-10-15 11:43:54 +03:00
bug26556_3
0026622: Tests - Avoid using dlog and decho commands in test scripts
2015-10-15 11:43:54 +03:00
bug26556_4
0026622: Tests - Avoid using dlog and decho commands in test scripts
2015-10-15 11:43:54 +03:00
bug26565_1
0026565: Compsolid after cut becomes compound of solids
2015-10-01 14:49:29 +03:00
bug26565_2
0026565: Compsolid after cut becomes compound of solids
2015-10-01 14:49:29 +03:00
bug26565_3
0026565: Compsolid after cut becomes compound of solids
2015-10-01 14:49:29 +03:00
bug26565_4
0026565: Compsolid after cut becomes compound of solids
2015-10-01 14:49:29 +03:00
bug26565_5
0026565: Compsolid after cut becomes compound of solids
2015-10-01 14:49:29 +03:00
bug26565_6
0026565: Compsolid after cut becomes compound of solids
2015-10-01 14:49:29 +03:00
bug26565_7
0026565: Compsolid after cut becomes compound of solids
2015-10-01 14:49:29 +03:00
bug26565_8
0026565: Compsolid after cut becomes compound of solids
2015-10-01 14:49:29 +03:00
bug26567
0026567: Exception in Boolean intersection command
2015-09-17 17:00:51 +03:00
bug26575
0026575: Normal projection of an edge to a face is wrong
2015-09-10 17:35:30 +03:00
bug26582
0026565: Compsolid after cut becomes compound of solids
2015-10-01 14:49:29 +03:00
bug26587
0026622: Tests - Avoid using dlog and decho commands in test scripts
2015-10-15 11:43:54 +03:00
bug26588
0026588: SIGSEGV in BRepFeat_MakeDPrism::Perform()
2015-09-17 17:01:33 +03:00
bug26607
0026607: Wrong value of area.
2015-10-01 13:49:24 +03:00
bug26609
0026609: Wrong result obtained by solid classifier algorithm.
2015-10-08 13:29:04 +03:00
bug26616
Adjusting test cases for current state of occt
2015-09-28 12:53:22 +03:00
bug26621
0026742: Update test cases for using checknbshapes procedure instead of global variables
2015-10-08 10:54:30 +03:00
bug26627
0026627: [Regression] Shape Healing hangs as of OCC 6.8.0
2015-09-10 16:40:29 +03:00
bug26636
0026622: Tests - Avoid using dlog and decho commands in test scripts
2015-10-15 11:43:54 +03:00
bug26640
0026640: ShapeFix_Edge::FixAddPCurve problem in OCC 6.8
2015-09-17 12:50:58 +03:00
bug26647
0026647: BRepTools::UVBounds() computes zero range by V
2015-09-10 16:31:40 +03:00
bug26674
0026674: Performance regression in BRepExtrema_DistShapeShape in OCCT 6.9.0 in compare with OCCT 6.7.1
2015-09-17 17:01:29 +03:00
bug26681
0026681: BRepPrimAPI_MakeRevol creates faulty shape
2015-11-19 14:22:54 +03:00
bug26687
0026622: Tests - Avoid using dlog and decho commands in test scripts
2015-10-15 11:43:54 +03:00
bug26699
0026699: Wrong section curves
2015-10-29 14:02:13 +03:00
bug26701
0026701: BOPAlgo_Builder::Perform crash.
2015-09-24 14:14:47 +03:00
bug26717
0026717: Error in IntPatch_PrmPrmIntersection: change of local resolution leads to break of walking line
2015-10-08 10:24:07 +03:00
bug26718
0026718: Big tolerance value of the edge in the result of General Fuse operation
2015-10-01 13:58:59 +03:00
bug26736_1
0026736: Errors in BRepOffsetAPI_MakeOffset: overlapping arcs are processed incorrect in mode GeomAbs_Intersection
2015-10-15 12:08:15 +03:00
bug26736_2
0026736: Errors in BRepOffsetAPI_MakeOffset: overlapping arcs are processed incorrect in mode GeomAbs_Intersection
2015-10-15 12:08:15 +03:00
bug26744
0026744: Boolean Cut builds incorrect result
2015-11-05 12:10:47 +03:00
bug26746
0026746: Method gp_Torus::Coefficients(...) returns incorrect value.
2015-10-15 12:48:28 +03:00
bug26750
0026750: Method IsNormal(...) for gp_Vec2d returns FALSE if the angle between two vectors is equal to -90 degree (-M_PI/2 radian)
2015-10-08 10:17:03 +03:00
bug26757_1
0026757: Wrong history of a fillet
2015-11-05 12:14:03 +03:00
bug26757_2
0026757: Wrong history of a fillet
2015-11-05 12:14:03 +03:00
bug26775
0026775: Bad result of section algorithm
2015-10-22 11:09:56 +03:00