aml 03383c97c3 0026473: Offset API fails to create offset shape ...

Tolerance of map building changed.
Added possibility to work 0.0 offset value.

Added test cases bugs/modalg_6/bug26473_1 bug26473_2

2015-07-29 15:34:24 +03:00

..

begin

0021821: Section of face by plane is not built due to small edges

2015-04-16 14:10:25 +03:00

bug7093

0007093: BRepLib::SameParameter() changes tolerance of shape, not involved into operation

2015-04-06 17:24:47 +03:00

bug21351

0021351: Fail to compute derivatives of offset surface on trimmed surfaces on offsets on CN surfaces

2015-04-23 16:29:58 +03:00

bug21507

0021507: Bug in BOP: bcut produces invalid result without notice

2015-04-16 16:29:48 +03:00

bug21624

0021624: BRepFeat_SplitShape produce invalid shape

2015-04-23 16:34:15 +03:00

bug21727

0021727: BRepBuilderAPI_Copy (and possibly other similar tools) create new shape in Frozen state

2015-04-30 14:11:07 +03:00

bug21821

0021821: Section of face by plane is not built due to small edges

2015-04-16 14:10:25 +03:00

bug22644_1

0022644: Incorrect result of Boolean operations (Fuse, Cut, Common)

2015-04-16 16:37:34 +03:00

bug22644_2

0022644: Incorrect result of Boolean operations (Fuse, Cut, Common)

2015-04-16 16:37:34 +03:00

bug22644_3

0022644: Incorrect result of Boolean operations (Fuse, Cut, Common)

2015-04-16 16:37:34 +03:00

bug22793

Correction of test-cases according to OCC23150 requirements (new format of checknbshapes command).

2015-04-24 14:56:15 +03:00

bug23138

0023138: BRepAlgoAPI_Fuse produce invalid result

2015-04-16 16:34:01 +03:00

bug24011

0024011: Can't offset a wire on face

2015-04-23 16:38:53 +03:00

bug24161

0024161: boolean operation hanging

2015-04-30 13:58:51 +03:00

bug24357

0026241: Sewing algorithm computes tolerance of joint vertex too rough

2015-06-18 14:04:52 +03:00

bug24803

0024803: improve the result of v/v interference for two vertices case

2015-04-09 16:28:55 +03:00

bug25271

0025271: Wrong result obtained by solid classifier algorithm

2015-05-08 08:51:46 +03:00

bug25593

0025593: Number of intersection points for 2d curves depends on the order of arguments in command "2dintersect"

2015-04-16 10:34:12 +03:00

bug25613_1

0025613: Wrong distance found by xdistef command for attached shapes

2015-07-03 13:39:37 +03:00

bug25613_2

0025613: Wrong distance found by xdistef command for attached shapes

2015-07-03 13:39:37 +03:00

bug25820_1

0025820: No Intersection Curves between surface of revolution and planes

2015-06-18 13:31:42 +03:00

bug25820_2

0025820: No Intersection Curves between surface of revolution and planes

2015-06-18 13:31:42 +03:00

bug25820_3

0025820: No Intersection Curves between surface of revolution and planes

2015-06-18 13:31:42 +03:00

bug25844

0025844: Command checkshape does not detect error for case when degenerated edge does not contain geometric representation.

2015-05-06 16:44:28 +03:00

bug25880

0025880: fuzzy booleans with multiple tools

2015-04-30 14:42:59 +03:00

bug25890

0025890: Intersection algorithm produces curves overlaped

2015-05-08 08:51:43 +03:00

bug25908

0024682: Move out B-spline cache from curves and surfaces to dedicated classes BSplCLib_Cache and BSplSLib_Cache

2015-05-28 13:38:22 +03:00

bug25937_1

0025937: Failed Cut Edge or Face by HalfSpace.

2015-04-30 13:51:04 +03:00

bug25937_2

0025937: Failed Cut Edge or Face by HalfSpace.

2015-04-30 13:51:04 +03:00

bug25937_3

0025937: Failed Cut Edge or Face by HalfSpace.

2015-04-30 13:51:04 +03:00

bug26008

0026008: Wrong intersection 2D-curves obtained for pair of faces.

2015-04-09 16:12:05 +03:00

bug26010

0026010: [OCCT 6.8.0 regression] BRepFeat_SplitShape returns invalid shapes

2015-05-06 16:48:29 +03:00

bug26016

0026016: BRepPrimAPI_MakeRevol crash

2015-04-09 15:05:42 +03:00

bug26041

0026041: GeomLib_Tool::Parameter method fails

2015-04-16 11:30:11 +03:00

bug26063

0026063: GeomAPI_ExtremaCurveSurface have inexact API

2015-05-28 12:45:17 +03:00

bug26064

0026064: distmini of two edges locks up

2015-04-30 13:19:23 +03:00

bug26075

0026075: Make Extrema_GenExtCC return IsParallel flag in case of parallel curves

2015-06-04 14:14:52 +03:00

bug26080

Correction of test-cases according to OCC23150 requirements (new format of checknbshapes command).

2015-04-24 14:56:15 +03:00

bug26098

0026098: The result of General Fuse operation is self-interfered shape

2015-04-23 17:00:57 +03:00

bug26112

0026112: Exception is raised during perform of General Fuse operation

2015-04-30 13:33:11 +03:00

bug26130

0026130: PCurve creation failure

2015-04-30 14:34:11 +03:00

bug26151_1

0026151: Wrong result obtained by intersection algorithm.

2015-06-10 10:39:34 +03:00

bug26151_2

0026151: Wrong result obtained by intersection algorithm.

2015-06-10 10:39:34 +03:00

bug26152_1

0026152: Wrong result obtained by projection algorithm.

2015-04-30 14:37:40 +03:00

bug26152_2

0026152: Wrong result obtained by projection algorithm.

2015-04-30 14:37:40 +03:00

bug26180

0026180: Modeling Algorithms - Provide shape self-intersection detector

2015-05-28 12:19:25 +03:00

bug26185_1

0026185: BRepOffsetAPI_MakeOffset: regressions on some customer's cases

2015-05-28 15:26:35 +03:00

bug26185_2

0026185: BRepOffsetAPI_MakeOffset: regressions on some customer's cases

2015-05-28 15:26:35 +03:00

bug26185_3

0026185: BRepOffsetAPI_MakeOffset: regressions on some customer's cases

2015-05-28 15:26:35 +03:00

bug26185_4

0026185: BRepOffsetAPI_MakeOffset: regressions on some customer's cases

2015-05-28 15:26:35 +03:00

bug26185_5

0026185: BRepOffsetAPI_MakeOffset: regressions on some customer's cases

2015-05-28 15:26:35 +03:00

bug26185_6

0026185: BRepOffsetAPI_MakeOffset: regressions on some customer's cases

2015-05-28 15:26:35 +03:00

bug26185_7

0026185: BRepOffsetAPI_MakeOffset: regressions on some customer's cases

2015-05-28 15:26:35 +03:00

bug26193

0026193: Incomplete intersection curve

2015-06-04 14:06:34 +03:00

bug26197

0026197: Incomplete intersection curve

2015-05-21 13:48:48 +03:00

bug26201

0026201: Wrong processing of dissymetric chamfer: order of chords unjustly changes

2015-05-21 13:57:51 +03:00

bug26202

0026202: Wrong result of chamfer on cylindrical surface: wrong value of chord

2015-05-14 17:05:38 +03:00

bug26206

0026206: BRepClass_FaceClassifier returns TopAbs_OUT for internal point

2015-06-04 14:35:36 +03:00

bug26208

0026193: Incomplete intersection curve

2015-06-04 14:06:34 +03:00

bug26218

0026218: Wrong result done by General Fuse algorithm

2015-05-21 12:52:49 +03:00

bug26224

0026224: Wrong result obtained by Common operator.

2015-05-21 12:57:19 +03:00

bug26233

0026233: BRepOffset_MakeOffset makes incorrect result

2015-06-04 12:41:48 +03:00

bug26241

0026241: Sewing algorithm computes tolerance of joint vertex too rough

2015-06-18 14:04:52 +03:00

bug26253

0026253: Wrong result obtained by General Fuse operator.

2015-05-28 15:23:03 +03:00

bug26281_1

0026281: BRepCheck_Edge::Tolerance() raises exception on the given shapes

2015-06-04 14:03:08 +03:00

bug26281_2

0026281: BRepCheck_Edge::Tolerance() raises exception on the given shapes

2015-06-04 14:03:08 +03:00

bug26296_1

0026296: Errors in BRepOffsetAPI_MakeOffset: failure because of wrong direction of bisector.

2015-07-02 13:40:52 +03:00

bug26296_2

0026296: Errors in BRepOffsetAPI_MakeOffset: failure because of wrong direction of bisector.

2015-07-02 13:40:52 +03:00

bug26296_3

0026296: Errors in BRepOffsetAPI_MakeOffset: failure because of wrong direction of bisector.

2015-07-02 13:40:52 +03:00

bug26296_4

0026296: Errors in BRepOffsetAPI_MakeOffset: failure because of wrong direction of bisector.

2015-07-02 13:40:52 +03:00

bug26296_5

0026296: Errors in BRepOffsetAPI_MakeOffset: failure because of wrong direction of bisector.

2015-07-02 13:40:52 +03:00

bug26305_1

0026305: BRepFeat_MakePrism returns inconsistent results && 026315: BRepFeat_MakeRevol fails to create revol from shape

2015-06-18 13:37:13 +03:00

bug26305_2

0026305: BRepFeat_MakePrism returns inconsistent results && 026315: BRepFeat_MakeRevol fails to create revol from shape

2015-06-18 13:37:13 +03:00

bug26305_3

0026305: BRepFeat_MakePrism returns inconsistent results && 026315: BRepFeat_MakeRevol fails to create revol from shape

2015-06-18 13:37:13 +03:00

bug26308

0026308: Segmentation fault in BSplCLib::LocateParameter

2015-07-20 15:24:00 +03:00

bug26310_1

0026310: Very slow boolean cut operations on cylinders

2015-07-22 16:11:31 +03:00

bug26310_2

0026310: Very slow boolean cut operations on cylinders

2015-07-22 16:11:31 +03:00

bug26310_3

0026310: Very slow boolean cut operations on cylinders

2015-07-22 16:11:31 +03:00

bug26310_4

0026310: Very slow boolean cut operations on cylinders

2015-07-22 16:11:31 +03:00

bug26315

0026305: BRepFeat_MakePrism returns inconsistent results && 026315: BRepFeat_MakeRevol fails to create revol from shape

2015-06-18 13:37:13 +03:00

bug26316

0026316: Infinite modification of the shapes in General Fuse operation

2015-06-25 12:51:30 +03:00

bug26330

0026330: BRepOffsetAPI_ThruSections creates invalid shape

2015-06-25 13:10:30 +03:00

bug26332

0026332: BRepOffsetAPI_ThruSections algorithm fails on two wires with different number of edges

2015-07-02 13:47:37 +03:00

bug26352

0026352: Wrong intersection points found

2015-07-02 14:28:55 +03:00

bug26356

0026356: Wrong result done by projection algorithm

2015-07-09 14:14:55 +03:00

bug26379_1

0026379: Wrong result produced by the volume maker algorithm

2015-07-09 14:20:02 +03:00

bug26379_2

0026379: Wrong result produced by the volume maker algorithm

2015-07-09 14:20:02 +03:00

bug26387

0026387: BRepPrimAPI_MakePrism crash when extruding Paraboloid face.

2015-07-20 14:08:18 +03:00

bug26393

0026393: Add draw commands to evaluate history of modifications of BOP

2015-07-28 17:59:13 +03:00

bug26406

0026406: BRepPrimAPI_MakeRevol crash when rotating Paraboloid face.

2015-07-20 15:01:16 +03:00

bug26418_1

0026418: Unjustified limitation on tolerance of a input shape in BRepOffset_MakeOffset

2015-07-21 11:20:27 +03:00

bug26418_2

0026418: Unjustified limitation on tolerance of a input shape in BRepOffset_MakeOffset

2015-07-21 11:20:27 +03:00

bug26418_3

0026418: Unjustified limitation on tolerance of a input shape in BRepOffset_MakeOffset

2015-07-21 11:20:27 +03:00

bug26418_4

0026418: Unjustified limitation on tolerance of a input shape in BRepOffset_MakeOffset

2015-07-21 11:20:27 +03:00

bug26420_1

0026420: BOPAlgo_Builder resets "Closed" flag in the result

2015-07-29 15:30:42 +03:00

bug26420_2

0026420: BOPAlgo_Builder resets "Closed" flag in the result

2015-07-29 15:30:42 +03:00

bug26420_3

0026420: BOPAlgo_Builder resets "Closed" flag in the result

2015-07-29 15:30:42 +03:00

bug26444

0026444: Boolean operation "bcut" gives invalid result between solid and halfspace solid.

2015-07-29 15:25:01 +03:00

bug26466

0026466: UnifySameDomain creates invalid result shape from valid input shape

2015-07-28 17:59:16 +03:00

bug26473_1

0026473: Offset API fails to create offset shape

2015-07-29 15:34:24 +03:00

bug26473_2

0026473: Offset API fails to create offset shape

2015-07-29 15:34:24 +03:00