reading of multidomain stl files into separate Poly_Triangulation objects (draft)

src/BOPTest/BOPTest_BOPCommands.cxx

@@ -647,7 +647,6 @@ Standard_Integer bopcurves (Draw_Interpretor& di,
                      aToApproxC2dOnS2,
                      anAppTol);
   aFF.SetList(aListOfPnts);
-  aFF.SetFuzzyValue (BOPTest_Objects::FuzzyValue());
   //
   aFF.Perform (aF1, aF2);
   //

src/BRepMesh/BRepMesh_DefaultRangeSplitter.cxx

@@ -18,7 +18,6 @@
 #include <GCPnts_AbscissaPoint.hxx>
 #include <GeomAdaptor_Curve.hxx>
 #include <GeomAbs_IsoType.hxx>
-#include <BRep_Tool.hxx>
 
 //=======================================================================
 // Function: Reset
@@ -126,14 +125,9 @@ void BRepMesh_DefaultRangeSplitter::computeTolerance(
   const Standard_Real aDiffU = myRangeU.second - myRangeU.first;
   const Standard_Real aDiffV = myRangeV.second - myRangeV.first;
 
-  const Standard_Real      aTolerance = BRep_Tool::Tolerance (myDFace->GetFace());
-  const Adaptor3d_Surface& aSurface   = GetSurface()->Surface();
-  const Standard_Real      aResU      = aSurface.UResolution (aTolerance);
-  const Standard_Real      aResV      = aSurface.VResolution (aTolerance);
-
   const Standard_Real aDeflectionUV = 1.e-05;
-  myTolerance.first  = Max(Min(aDeflectionUV, aResU), 1e-7 * aDiffU);
-  myTolerance.second = Max(Min(aDeflectionUV, aResV), 1e-7 * aDiffV);
+  myTolerance.first  = Max(Min(aDeflectionUV, 0.1 * aDiffU), 1e-7 * aDiffU);
+  myTolerance.second = Max(Min(aDeflectionUV, 0.1 * aDiffV), 1e-7 * aDiffV);
 }
 
 //=======================================================================

src/GeomToStep/GeomToStep_MakeCurve.cxx

@@ -42,7 +42,6 @@
 #include <StepGeom_Conic.hxx>
 #include <StepGeom_Curve.hxx>
 #include <StepGeom_Line.hxx>
-#include <Geom2d_TrimmedCurve.hxx>
 
 //=============================================================================
 // Creation d' une Curve de prostep a partir d' une Curve de Geom
@@ -163,10 +162,6 @@ GeomToStep_MakeCurve::GeomToStep_MakeCurve ( const Handle(Geom2d_Curve)& C)
     GeomToStep_MakeBoundedCurve MkBoundedC(L);
     theCurve = MkBoundedC.Value();
   }
-  else if (C->IsKind(STANDARD_TYPE(Geom2d_TrimmedCurve))) {
-    GeomToStep_MakeCurve aMaker = (Handle(Geom2d_TrimmedCurve)::DownCast(C)->BasisCurve());
-    theCurve = aMaker.Value();
-  }
   else
     done = Standard_False;
 } 

src/IGESData/IGESData_GlobalNodeOfSpecificLib.hxx

@@ -47,9 +47,6 @@ public:
   //! Once added, stores its attached Protocol in correspondance
   Standard_EXPORT void Add (const Handle(IGESData_SpecificModule)& amodule, const Handle(IGESData_Protocol)& aprotocol);
   
-  //! Removes a Module from the list
-  Standard_EXPORT void Remove(const Handle(IGESData_SpecificModule)& amodule);
-
   //! Returns the Module stored in a given GlobalNode
   Standard_EXPORT const Handle(IGESData_SpecificModule)& Module() const;
   

src/IGESData/IGESData_GlobalNodeOfWriterLib.hxx

@@ -47,9 +47,6 @@ public:
   //! Once added, stores its attached Protocol in correspondance
   Standard_EXPORT void Add (const Handle(IGESData_ReadWriteModule)& amodule, const Handle(IGESData_Protocol)& aprotocol);
   
-  //! Removes a Module from the list
-  Standard_EXPORT void Remove(const Handle(IGESData_ReadWriteModule)& amodule);
-
   //! Returns the Module stored in a given GlobalNode
   Standard_EXPORT const Handle(IGESData_ReadWriteModule)& Module() const;
   

src/IGESData/IGESData_SpecificLib.hxx

@@ -44,9 +44,6 @@ public:
   //! for this class of Library.
   Standard_EXPORT static void SetGlobal (const Handle(IGESData_SpecificModule)& amodule, const Handle(IGESData_Protocol)& aprotocol);
   
-  //! Releases a module from the global definition set.
-  Standard_EXPORT static void ReleaseGlobal(const Handle(IGESData_SpecificModule)& amodule);
-
   //! Creates a Library which complies with a Protocol, that is :
   //! Same class (criterium IsInstance)
   //! This creation gets the Modules from the global set, those

src/IGESData/IGESData_WriterLib.hxx

@@ -44,9 +44,6 @@ public:
   //! for this class of Library.
   Standard_EXPORT static void SetGlobal (const Handle(IGESData_ReadWriteModule)& amodule, const Handle(IGESData_Protocol)& aprotocol);
   
-  //! Releases a module from the global definition set.
-  Standard_EXPORT static void ReleaseGlobal(const Handle(IGESData_ReadWriteModule)& amodule);
-
   //! Creates a Library which complies with a Protocol, that is :
   //! Same class (criterium IsInstance)
   //! This creation gets the Modules from the global set, those

src/IntPatch/IntPatch_ImpImpIntersection_4.gxx

@@ -3507,8 +3507,8 @@ static IntPatch_ImpImpIntersection::IntStatus
       const IntSurf_PntOn2S& aPntLWL1 = aWLine1->Point(aWLine1->NbPnts());
 
       const IntSurf_PntOn2S aPntCur = theSPnt.Value(aNbPnt).PntOn2S();
-      if (aPntCur.IsSame(aPntFWL1, aTol3D) ||
-        aPntCur.IsSame(aPntLWL1, aTol3D))
+      if (aPntCur.IsSame(aPntFWL1, Precision::Confusion()) ||
+        aPntCur.IsSame(aPntLWL1, Precision::Confusion()))
       {
         theSPnt.Remove(aNbPnt);
         aNbPnt--;

src/Interface/Interface_GeneralLib.hxx

@@ -43,9 +43,6 @@ public:
   //! for this class of Library.
   Standard_EXPORT static void SetGlobal (const Handle(Interface_GeneralModule)& amodule, const Handle(Interface_Protocol)& aprotocol);
   
-  //! Releases a module from the global definition set.
-  Standard_EXPORT static void ReleaseGlobal(const Handle(Interface_GeneralModule)& amodule);
-
   //! Creates a Library which complies with a Protocol, that is :
   //! Same class (criterium IsInstance)
   //! This creation gets the Modules from the global set, those

src/Interface/Interface_GlobalNodeOfGeneralLib.hxx

@@ -47,9 +47,6 @@ public:
   //! Once added, stores its attached Protocol in correspondance
   Standard_EXPORT void Add (const Handle(Interface_GeneralModule)& amodule, const Handle(Interface_Protocol)& aprotocol);
   
-  //! Removes a Module from the list
-  Standard_EXPORT void Remove(const Handle(Interface_GeneralModule)& amodule);
-
   //! Returns the Module stored in a given GlobalNode
   Standard_EXPORT const Handle(Interface_GeneralModule)& Module() const;
   

src/Interface/Interface_GlobalNodeOfReaderLib.hxx

@@ -47,9 +47,6 @@ public:
   //! Once added, stores its attached Protocol in correspondance
   Standard_EXPORT void Add (const Handle(Interface_ReaderModule)& amodule, const Handle(Interface_Protocol)& aprotocol);
   
-  //! Removes a Module from the list
-  Standard_EXPORT void Remove(const Handle(Interface_ReaderModule)& amodule);
-
   //! Returns the Module stored in a given GlobalNode
   Standard_EXPORT const Handle(Interface_ReaderModule)& Module() const;
   

src/Interface/Interface_ReaderLib.hxx

@@ -43,9 +43,6 @@ public:
   //! for this class of Library.
   Standard_EXPORT static void SetGlobal (const Handle(Interface_ReaderModule)& amodule, const Handle(Interface_Protocol)& aprotocol);
   
-  //! Releases a module from the global definition set.
-  Standard_EXPORT static void ReleaseGlobal(const Handle(Interface_ReaderModule)& amodule);
-
   //! Creates a Library which complies with a Protocol, that is :
   //! Same class (criterium IsInstance)
   //! This creation gets the Modules from the global set, those

src/LibCtl/LibCtl_GlobalNode.gxx

@@ -38,26 +38,6 @@ LibCtl_GlobalNode::LibCtl_GlobalNode ()    {  }
   else thenext->Add (amodule,aprotocol);
 }
 
-void LibCtl_GlobalNode::Remove(const Handle(TheModule)& amodule)
-{
-  if (themod == amodule)
-  {
-    if (thenext.IsNull())
-    {
-      themod = Handle(TheModule)();
-      theprot = Handle(TheProtocol)();
-    }
-    else
-    {
-      themod = thenext->themod;
-      theprot = thenext->theprot;
-      thenext = thenext->thenext;
-    }
-  }
-  else if (!thenext.IsNull())
-    thenext->Remove(amodule);
-}
-
     const Handle(TheModule)& LibCtl_GlobalNode::Module () const
       {  return themod;  }
 

src/LibCtl/LibCtl_Library.gxx

@@ -36,12 +36,6 @@ static Handle(LibCtl_Node) thelast;
   theglobal->Add(amodule,aprotocol);
 }
 
-void LibCtl_Library::ReleaseGlobal(const Handle(TheModule)& amodule)
-{
-  if (!theglobal.IsNull())
-    theglobal->Remove(amodule);
-}
-
 // Constructeur d apres Protocole
     LibCtl_Library::LibCtl_Library (const Handle(TheProtocol)& aprotocol)
 {

src/RWStepAP214/RWStepAP214.cxx

@@ -22,43 +22,18 @@
 #include <StepAP214_Protocol.hxx>
 #include <StepData_WriterLib.hxx>
 
-DEFINE_STANDARD_HANDLE(RWStepAP214_Mgr, Standard_Transient)
-
-class RWStepAP214_Mgr : public Standard_Transient
-{
-public:
-  RWStepAP214_Mgr()
-  {
-    myProtocol = StepAP214::Protocol();
-    myGeneralModule = new RWStepAP214_GeneralModule;
-    myRWModule = new RWStepAP214_ReadWriteModule;
-    Interface_GeneralLib::SetGlobal(myGeneralModule, myProtocol);
-    Interface_ReaderLib::SetGlobal(myRWModule, myProtocol);
-    StepData_WriterLib::SetGlobal(myRWModule, myProtocol);
-  }
-
-  virtual ~RWStepAP214_Mgr()
-  {
-    Interface_GeneralLib::ReleaseGlobal(myGeneralModule);
-    Interface_ReaderLib::ReleaseGlobal(myRWModule);
-    StepData_WriterLib::ReleaseGlobal(myRWModule);
-  }
-
-  DEFINE_STANDARD_RTTI_INLINE(RWStepAP214_Mgr, Standard_Transient)
-
-private:
-  Handle(StepAP214_Protocol) myProtocol;
-  Handle(RWStepAP214_ReadWriteModule) myRWModule;
-  Handle(RWStepAP214_GeneralModule) myGeneralModule;
-};
-
-static Handle(RWStepAP214_Mgr) THE_MGR;
+static int THE_RWStepAP214_init = 0;
 
 void RWStepAP214::Init()
 {
-  if (THE_MGR.IsNull())
+  if (THE_RWStepAP214_init)
   {
+    return;
+  }
+  THE_RWStepAP214_init = 1;
   RWHeaderSection::Init();
-    THE_MGR = new RWStepAP214_Mgr;
-  }
+  Handle(StepAP214_Protocol) proto = StepAP214::Protocol();
+  Interface_GeneralLib::SetGlobal (new RWStepAP214_GeneralModule,proto);
+  Interface_ReaderLib::SetGlobal  (new RWStepAP214_ReadWriteModule,proto);
+  StepData_WriterLib::SetGlobal   (new RWStepAP214_ReadWriteModule,proto);
 }

src/RWStl/RWStl.cxx

@@ -97,9 +97,25 @@ namespace
       return aPoly;
     }
 
+    //! Add new solid
+    virtual void AddSolid() Standard_OVERRIDE
+    {
+      Handle(Poly_Triangulation) aCurrentTri = GetTriangulation();
+      myTriangulationList.Append(aCurrentTri);
+      myNodes.Clear();
+      myTriangles.Clear();
+    }
+
+    NCollection_Sequence<Handle(Poly_Triangulation)> GetTriangulationList()
+    {
+      return myTriangulationList;
+    }
+
+
   private:
     NCollection_Vector<gp_XYZ> myNodes;
     NCollection_Vector<Poly_Triangle> myTriangles;
+    NCollection_Sequence<Handle(Poly_Triangulation)> myTriangulationList;
   };
 
 }
@@ -118,6 +134,17 @@ Handle(Poly_Triangulation) RWStl::ReadFile (const Standard_CString theFile,
   return aReader.GetTriangulation();
 }
 
+//=============================================================================
+//function : ReadFile
+//purpose  :
+//=============================================================================
+void RWStl::ReadFile(const Standard_CString theFile, NCollection_Sequence<Handle(Poly_Triangulation)>& theTriangList)
+{
+  Reader aReader;
+  aReader.Read(theFile, Handle(Message_ProgressIndicator)(), true);
+  theTriangList = aReader.GetTriangulationList();
+}
+
 //=============================================================================
 //function : ReadFile
 //purpose  :

src/RWStl/RWStl.hxx

@@ -50,6 +50,8 @@ public:
   Standard_EXPORT static Handle(Poly_Triangulation) ReadFile (const Standard_CString theFile,
                                                               const Handle(Message_ProgressIndicator)& aProgInd = Handle(Message_ProgressIndicator)());
 
+  Standard_EXPORT static void ReadFile(const Standard_CString theFile, NCollection_Sequence<Handle(Poly_Triangulation)>& theTriangList);
+
   //! Read triangulation from a binary STL file
   //! In case of error, returns Null handle.
   Standard_EXPORT static Handle(Poly_Triangulation) ReadBinary (const OSD_Path& thePath,

src/RWStl/RWStl_Reader.cxx

@@ -126,7 +126,8 @@ namespace
 //==============================================================================
 
 Standard_Boolean RWStl_Reader::Read (const char* theFile,
-                                     const Handle(Message_ProgressIndicator)& theProgress)
+                                     const Handle(Message_ProgressIndicator)& theProgress,
+                                     bool IsMultiSolid)
 {
   std::filebuf aBuf;
   OSD_OpenStream (aBuf, theFile, std::ios::in | std::ios::binary);
@@ -165,6 +166,8 @@ Standard_Boolean RWStl_Reader::Read (const char* theFile,
       }
     }
     aStream >> std::ws; // skip any white spaces
+    if (IsMultiSolid)
+      AddSolid();
   }
   return ! aStream.fail();
 }

src/RWStl/RWStl_Reader.hxx

@@ -39,7 +39,8 @@ public:
   //! Format is recognized automatically by analysis of the file header.
   //! Returns true if success, false on error or user break.
   Standard_EXPORT Standard_Boolean Read (const char* theFile,
-                                         const Handle(Message_ProgressIndicator)& theProgress);
+                                         const Handle(Message_ProgressIndicator)& theProgress,
+                                         bool IsMultiSolid = false);
 
   //! Guess whether the stream is an Ascii STL file, by analysis of the first bytes (~200).
   //! The function attempts to put back the read symbols to the stream which thus must support ungetc().
@@ -74,6 +75,8 @@ public:
   //! Should create new triangle built on specified nodes in the target model.
   virtual void AddTriangle (Standard_Integer theN1, Standard_Integer theN2, Standard_Integer theN3) = 0;
 
+  virtual void AddSolid() = 0;
+
 };
 
 #endif

src/STEPCAFControl/STEPCAFControl_Controller.cxx

@@ -22,33 +22,6 @@
 
 IMPLEMENT_STANDARD_RTTIEXT(STEPCAFControl_Controller,STEPControl_Controller)
 
-
-DEFINE_STANDARD_HANDLE(STEPCAF_Mgr, Standard_Transient)
-
-class STEPCAF_Mgr : public Standard_Transient
-{
-public:
-  STEPCAF_Mgr()
-  {
-    myCtl = new STEPCAFControl_Controller;
-    // do something to avoid warnings...
-    myCtl->AutoRecord();
-  }
-
-  virtual ~STEPCAF_Mgr()
-  {
-    myCtl->AutoRelease();
-  }
-
-  DEFINE_STANDARD_RTTI_INLINE(STEPCAF_Mgr, Standard_Transient)
-
-private:
-  Handle(STEPCAFControl_Controller) myCtl;
-};
-
-static Handle(STEPCAF_Mgr) THE_MGR;
-
-
 //=======================================================================
 //function : STEPCAFControl_Controller
 //purpose  : 
@@ -69,9 +42,12 @@ Standard_Boolean STEPCAFControl_Controller::Init ()
   static Standard_Boolean inic = Standard_False;
   if (inic) return Standard_True;
   inic = Standard_True;
+  // self-registering
+  Handle(STEPCAFControl_Controller) STEPCTL = new STEPCAFControl_Controller;
   // do XSAlgo::Init, cause it does not called before.
   XSAlgo::Init();
-  THE_MGR = new STEPCAF_Mgr;
+  // do something to avoid warnings...
+  STEPCTL->AutoRecord();
 
   //-----------------------------------------------------------
   // Few variables for advanced control of translation process

src/StepData/StepData_GlobalNodeOfWriterLib.hxx

@@ -47,9 +47,6 @@ public:
   //! Once added, stores its attached Protocol in correspondance
   Standard_EXPORT void Add (const Handle(StepData_ReadWriteModule)& amodule, const Handle(StepData_Protocol)& aprotocol);
   
-  //! Removes a Module from the list
-  Standard_EXPORT void Remove(const Handle(StepData_ReadWriteModule)& amodule);
-
   //! Returns the Module stored in a given GlobalNode
   Standard_EXPORT const Handle(StepData_ReadWriteModule)& Module() const;
   

src/StepData/StepData_WriterLib.hxx

@@ -43,9 +43,6 @@ public:
   //! for this class of Library.
   Standard_EXPORT static void SetGlobal (const Handle(StepData_ReadWriteModule)& amodule, const Handle(StepData_Protocol)& aprotocol);
   
-  //! Releases a module from the global definition set.
-  Standard_EXPORT static void ReleaseGlobal(const Handle(StepData_ReadWriteModule)& amodule);
-
   //! Creates a Library which complies with a Protocol, that is :
   //! Same class (criterium IsInstance)
   //! This creation gets the Modules from the global set, those

src/TopoDSToStep/TopoDSToStep_MakeStepEdge.cxx

@@ -53,8 +53,6 @@
 #include <Transfer_FinderProcess.hxx>
 #include <TransferBRep.hxx>
 #include <TransferBRep_ShapeMapper.hxx>
-#include <BRepTools.hxx>
-#include <ShapeAnalysis_Curve.hxx>
 
 // Processing of non-manifold topology (ssv; 11.11.2010)
 // ----------------------------------------------------------------------------
@@ -189,54 +187,6 @@ void TopoDSToStep_MakeStepEdge::Init(const TopoDS_Edge& aEdge,
     C = Handle(Geom_Curve)::DownCast(C->Copy());
     gp_Trsf Tr1 = CA.Trsf();
     C->Transform(Tr1);
-    if (C->IsPeriodic())
-    {
-      Standard_Real dpar = CA.LastParameter() - CA.FirstParameter();
-
-      Standard_Real aTolV1 = BRep_Tool::Tolerance(Vfirst);
-      Standard_Real aTolV2 = BRep_Tool::Tolerance(Vlast);
-      gp_Pnt aP1 = BRep_Tool::Pnt(Vfirst);
-      gp_Pnt aP2 = BRep_Tool::Pnt(Vlast);
-      gp_Pnt  pproj;
-      gp_Pnt aP11 = CA.Value(CA.FirstParameter());
-      gp_Pnt aP12 =CA.Value(CA.LastParameter());
-      ShapeAnalysis_Curve sac;
-      sac.Project (C, aP1, Tolerance(), pproj, U1, Standard_False);
-      sac.Project (C, aP2, Tolerance(), pproj, U2, Standard_False);
-      Standard_Real dU = U2 - U1;
-
-      if (dpar <= 0)
-        dpar += (ceil(fabs(dpar) / C->Period()) *C->Period());
-
-      if (dU <= 0)
-        dU += (ceil(fabs(dU) / C->Period()) *C->Period());
-      // if range obtained from projection of vertices is contradicted with range of the edge
-       //tnen vertices should be permuted
-
-      if ((dU  > Precision::PConfusion() &&  dU <= 0.1 * C->Period() && dpar > 0.5 * C->Period()) ||
-        (dpar  > Precision::PConfusion() && dpar <= 0.1 * C->Period() && dU > 0.5 * C->Period()))
-      {
-        Handle(StepShape_Vertex) aVtemp = V1; 
-        V1 = V2; V2 = aVtemp;
-      }
-
-      gp_Pnt aPm = CA.Value((CA.FirstParameter() + CA.LastParameter()) *0.5);
-      Standard_Real aDist11 = aP11.Distance(aP12);
-      Standard_Real aDist1m = aP11.Distance(aPm);
-      Standard_Real aDist2m = aP12.Distance(aPm);
-      Standard_Real aDistMax = Max(Max(aDist1m, aDist2m), aDist11);
-      Standard_Boolean isSmallCurve = (aDistMax <= aTolV1 ||  aDistMax <= aTolV2);
-      //for small edge lying BSpline periodic curve segment of the BSpline periodic curve is used to avoid invalid computation of the edge range duriring reading 
-      if (BRepTools::Compare(Vfirst, Vlast) && isSmallCurve  && C->IsPeriodic() && dpar > Precision::PConfusion() && dpar <= 0.1 * C->Period())
-      {
-        if (C->IsKind(STANDARD_TYPE(Geom_BSplineCurve)))
-        {
-          Handle(Geom_BSplineCurve) aBspl1 = Handle(Geom_BSplineCurve)::DownCast(C->Copy());
-          aBspl1->Segment (CA.FirstParameter(), CA.LastParameter());
-          C =  aBspl1;
-        }
-      }
-    }
     GeomToStep_MakeCurve MkCurve(C);
     Gpms = MkCurve.Value();
   }

src/XSControl/XSControl_Controller.cxx

@@ -131,13 +131,6 @@ void XSControl_Controller::Record (const Standard_CString theName) const
   listad.Bind(theName, this);
 }
 
-void XSControl_Controller::Release(const Standard_CString theName) const
-{
-  if (listad.IsBound(theName)) {
-    listad.UnBind(theName);
-  }
-}
-
 //=======================================================================
 //function : Recorded
 //purpose  : 

src/XSControl/XSControl_Controller.hxx

@@ -79,21 +79,10 @@ class XSControl_Controller : public Standard_Transient
     Record (Name(Standard_False));
   }
   
-  //! Removes <me> from the general dictionary under Short and Long
-  //! Names (see method Name)
-  void AutoRelease() const
-  {
-    Release (Name(Standard_True));
-    Release (Name(Standard_False));
-  }
-  
   //! Records <me> in a general dictionary under a name
   //! Error if <name> already used for another one
   Standard_EXPORT void Record (const Standard_CString name) const;
   
-  //! Removes <me> from the general dictionary under a name
-  Standard_EXPORT void Release(const Standard_CString name) const;
-
   //! Returns the Controller attached to a given name
   //! Returns a Null Handle if <name> is unknown
   Standard_EXPORT static Handle(XSControl_Controller) Recorded (const Standard_CString name);

src/XSDRAWSTLVRML/XSDRAWSTLVRML.cxx

@@ -411,6 +411,22 @@ static Standard_Integer ReadObj (Draw_Interpretor& theDI,
     {
       aFilePath = theArgVec[anArgIter];
     }
+    else if (theArgc == 4 && strcmp("multi", theArgv[3]) == 0)
+    {
+      NCollection_Sequence<Handle(Poly_Triangulation)> theTriangList;
+      RWStl::ReadFile(theArgv[2], theTriangList);
+      BRep_Builder aB;
+      TopoDS_Compound aCmp;
+      aB.MakeCompound(aCmp);
+      for (int i = 1; i <= theTriangList.Length(); i++)
+      { 
+        TopoDS_Face aFace;
+        aB.MakeFace(aFace);
+        aB.UpdateFace(aFace, theTriangList(i));
+        aB.Add(aCmp, aFace);
+      }
+      DBRep::Set(theArgv[1], aCmp);
+    }
     else
     {
       std::cout << "Syntax error at '" << theArgVec[anArgIter] << "'\n";

tests/bugs/modalg_7/bug31499_1

@@ -1,79 +0,0 @@
-puts "============================================================================================="
-puts "OCC31499: Boolean Operations - Custom fuzzy value corrupts the result of CUT"
-puts "============================================================================================="
-puts ""
-
-restore [locate_data_file bug31499.brep] s
-
-# perform operation with default fuzzy value
-bfuzzyvalue 1.e-7
-
-tcopy s s1
-explode s1 So
-
-bclearobjects
-bcleartools
-baddobjects s1_1
-baddtools s1_2 s1_3 s1_4
-bfillds
-
-bbop r1_0 0
-bbop r1_1 1
-bbop r1_2 2
-bbop r1_3 3
-bbop r1_4 4
-bbuild r1_5
-
-
-# perform operation with custom fuzzy value
-bfuzzyvalue 1.e-5
-
-tcopy s s2
-explode s2 So
-
-bclearobjects
-bcleartools
-baddobjects s2_1
-baddtools s2_2 s2_3 s2_4
-bfillds
- 
-bbop r2_0 0
-bbop r2_1 1
-bbop r2_2 2
-bbop r2_3 3
-bbop r2_4 4
-bbuild r2_5
-
-foreach j {1 2} {
-  foreach i {0 1 2 3 4 5} {
-    checkshape r${j}_$i
-    if {![regexp "OK" [bopcheck r${j}_$i]]} {
-      puts "Error: r${j}_$i is self-intersecting shape"
-    }
-  }
-}
-
-checkprops r1_0 -s 858.419 -v 687.948
-checknbshapes r1_0 -wire 21 -face 21 -shell 3 -solid 3 -t
-
-checkprops r1_1 -s 29829.2 -v 219732
-checknbshapes r1_1 -wire 34 -face 34 -shell 1 -solid 1 -t
-
-checkprops r1_2 -s 1987.39 -v 6408.07
-checknbshapes r1_2 -wire 19 -face 19 -shell 1 -solid 1 -t
-
-checkprops r1_3 -s 37868.2 -v 212636
-checknbshapes r1_3 -wire 60 -face 60 -shell 6 -solid 6 -t
-
-checkprops r1_4 -l 379.04
-checksection r1_4 -r 0
-
-checkprops r1_5 -s 40714 -v 219732
-checknbshapes r1_5 -wire 79 -face 79 -shell 10 -solid 10 -t
-
-foreach i {0 1 2 3 4 5} {
-  checkprops r2_$i -equal r1_$i
-  checknbshapes r2_$i -ref [nbshapes r2_$i]
-}
-
-checkview -display r2_2 -2d -path ${imagedir}/${test_image}.png

tests/bugs/modalg_7/bug31499_2

@@ -1,36 +0,0 @@
-puts "============================================================================================="
-puts "OCC31499: Boolean Operations - Custom fuzzy value corrupts the result of CUT"
-puts "============================================================================================="
-puts ""
-
-restore [locate_data_file bug31499.brep] s
-
-explode s So
-explode s_1 f; copy s_1_3 f1
-explode s_2 f; copy s_2_4 f2
-
-foreach c [directory c_*] { unset $c }
-
-bfuzzyvalue 1.e-7
-regexp {Tolerance Reached=([-0-9.+eE]*)} [bopcurves f1 f2 -2d] full tol3D1
-
-set length1 0.0
-foreach c [directory c_*] {
-  set length1 [dval $length1+[dval [lindex [length $c] 4]]]
-}
-
-foreach c [directory c_*] { unset $c }
-
-bfuzzyvalue 1.e-5
-regexp {Tolerance Reached=([-0-9.+eE]*)} [bopcurves f1 f2 -2d] full tol3D2
-
-set length2 0.0
-foreach c [directory c_*] {
-  set length2 [dval $length2+[dval [lindex [length $c] 4]]]
-}
-
-checkreal "Length of curves" $length2 $length1 1.e-7 1.e-7
-
-if {$tol3D2 > 1.e-5} {
-  puts "Error: Face/Face intersection tolerance is too big when using fuzzy value"
-}

tests/bugs/step/bug31301

@@ -1,5 +0,0 @@
-testreadstep [locate_data_file bug31301.stp] s
-testwritestep bug31301_1.stp s
-testreadstep bug31301_1.stp s1
-checkshape s1 f
-checkmaxtol s1 -ref 0.0078

tests/bugs/step/bug32228

@@ -1,17 +0,0 @@
-puts "# ====================================================================="
-puts "# 0032228: Data Exchange - Shape becomes invalid after STEP export then import"
-puts "# ====================================================================="
-puts ""
-
-# Reading file
-brestore [locate_data_file bug32228.brep] s
-set aTmpFile "$imagedir/${casename}.brep"
-testwritestep "$aTmpFile" s
-testreadstep  "$aTmpFile" s1
-file delete   "$aTmpFile"
-
-# Checking
-checknbshapes s1 -vertex 47 -edge 72 -wire 35 -face 28
-checkshape s1 f
-checkmaxtol s1 -ref 1.e-7
-checkprops s1 -v 586991 -deps 0.01

tests/de/step_1/G1

@@ -1,16 +1,17 @@
 # !!!! This file is generated automatically, do not edit manually! See end script
 puts "TODO CR23096 ALL: CHECKSHAPE : Faulty" 
+puts "TODO CR23096 ALL: TOLERANCE : Faulty" 
 
 
 set filename trj7_pm5-ug-214.stp
 
 set ref_data {
 DATA        : Faulties = 0  ( 0 )  Warnings = 0  ( 0 )  Summary  = 0  ( 0 )
-TPSTAT      : Faulties = 0  ( 0 )  Warnings = 3  ( 184 )  Summary  = 3  ( 184 )
-CHECKSHAPE  : Wires    = 1  ( 0 )  Faces    = 1  ( 0 )  Shells   = 0  ( 0 )   Solids   = 0 ( 0 )
+TPSTAT      : Faulties = 0  ( 0 )  Warnings = 5  ( 184 )  Summary  = 5  ( 184 )
+CHECKSHAPE  : Wires    = 2  ( 0 )  Faces    = 2  ( 0 )  Shells   = 0  ( 0 )   Solids   = 0 ( 0 )
 NBSHAPES    : Solid    = 1  ( 1 )  Shell    = 1  ( 1 )  Face     = 236  ( 236 ) 
 STATSHAPE   : Solid    = 1  ( 1 )  Shell    = 1  ( 1 )  Face     = 236  ( 236 )   FreeWire = 0  ( 0 ) 
-TOLERANCE   : MaxTol   = 0.004380869792  (  0.01854047103 )  AvgTol   =  0.000165684279  (  0.0006030086632 )
+TOLERANCE   : MaxTol   =   0.9036712735  (  0.01854047103 )  AvgTol   =  0.002850040066  (  0.0006030086632 )
 LABELS      : N0Labels = 1  ( 1 )  N1Labels = 34  ( 34 )  N2Labels = 0  ( 0 )   TotalLabels = 35  ( 35 )   NameLabels = 1  ( 1 )   ColorLabels = 35  ( 35 )   LayerLabels = 1  ( 1 )
 PROPS       : Centroid = 0  ( 0 )  Volume   = 0  ( 0 )  Area     = 0  ( 0 )
 NCOLORS     : NColors  = 11  ( 11 )

tests/de/step_4/D9

@@ -6,11 +6,11 @@ set filename test-m020306-v1.stp
 
 set ref_data {
 DATA        : Faulties = 0  ( 0 )  Warnings = 0  ( 0 )  Summary  = 0  ( 0 )
-TPSTAT      : Faulties = 1  ( 0 )  Warnings = 153  ( 114 )  Summary  = 154  ( 114 )
+TPSTAT      : Faulties = 0  ( 0 )  Warnings = 153  ( 114 )  Summary  = 153  ( 114 )
 CHECKSHAPE  : Wires    = 0  ( 0 )  Faces    = 0  ( 0 )  Shells   = 0  ( 0 )   Solids   = 0 ( 0 )
 NBSHAPES    : Solid    = 1  ( 1 )  Shell    = 1  ( 1 )  Face     = 742  ( 742 ) 
 STATSHAPE   : Solid    = 1  ( 1 )  Shell    = 1  ( 1 )  Face     = 742  ( 742 )   FreeWire = 0  ( 0 ) 
-TOLERANCE   : MaxTol   = 0.008481946718  (  0.01167623167 )  AvgTol   =  0.0001322682241  (  0.0003097606769 )
+TOLERANCE   : MaxTol   = 0.008481946718  (  0.01167623167 )  AvgTol   =  0.000132472064  (  0.0003097606769 )
 LABELS      : N0Labels = 1  ( 1 )  N1Labels = 0  ( 0 )  N2Labels = 0  ( 0 )   TotalLabels = 1  ( 1 )   NameLabels = 1  ( 1 )   ColorLabels = 0  ( 0 )   LayerLabels = 0  ( 0 )
 PROPS       : Centroid = 0  ( 0 )  Volume   = 0  ( 0 )  Area     = 0  ( 0 )
 NCOLORS     : NColors  = 0  ( 0 )

tests/de/step_4/E1

@@ -1,16 +1,13 @@
 # !!!! This file is generated automatically, do not edit manually! See end script
-puts "TODO CR23096 ALL: TPSTAT : Faulty" 
-
-
 set filename test-m020306-v2.stp
 
 set ref_data {
 DATA        : Faulties = 0  ( 0 )  Warnings = 0  ( 0 )  Summary  = 0  ( 0 )
-TPSTAT      : Faulties = 1  ( 0 )  Warnings = 63  ( 157 )  Summary  = 64  ( 157 )
+TPSTAT      : Faulties = 0  ( 0 )  Warnings = 61  ( 157 )  Summary  = 61  ( 157 )
 CHECKSHAPE  : Wires    = 0  ( 0 )  Faces    = 0  ( 0 )  Shells   = 0  ( 0 )   Solids   = 0 ( 0 )
 NBSHAPES    : Solid    = 1  ( 1 )  Shell    = 1  ( 1 )  Face     = 956  ( 956 ) 
 STATSHAPE   : Solid    = 1  ( 1 )  Shell    = 1  ( 1 )  Face     = 956  ( 956 )   FreeWire = 0  ( 0 ) 
-TOLERANCE   : MaxTol   = 0.008481946718  (  0.01167623167 )  AvgTol   =  0.000123986292  (  0.0003770309367 )
+TOLERANCE   : MaxTol   = 0.008481946718  (  0.05394823207 )  AvgTol   =  0.0001239210367  (  0.0004089750747 )
 LABELS      : N0Labels = 1  ( 1 )  N1Labels = 0  ( 0 )  N2Labels = 0  ( 0 )   TotalLabels = 1  ( 1 )   NameLabels = 1  ( 1 )   ColorLabels = 0  ( 0 )   LayerLabels = 0  ( 0 )
 PROPS       : Centroid = 0  ( 0 )  Volume   = 0  ( 0 )  Area     = 0  ( 0 )
 NCOLORS     : NColors  = 0  ( 0 )

tests/de/step_4/H1

@@ -1,16 +1,13 @@
 # !!!! This file is generated automatically, do not edit manually! See end script
-puts "TODO CR23096 ALL: TPSTAT : Faulty" 
-
-
 set filename Inventor_Engine.stp
 
 set ref_data {
 DATA        : Faulties = 0  ( 0 )  Warnings = 0  ( 0 )  Summary  = 0  ( 0 )
-TPSTAT      : Faulties = 1  ( 0 )  Warnings = 455  ( 560 )  Summary  = 456  ( 560 )
+TPSTAT      : Faulties = 0  ( 0 )  Warnings = 456  ( 560 )  Summary  = 456  ( 560 )
 CHECKSHAPE  : Wires    = 6  ( 6 )  Faces    = 6  ( 6 )  Shells   = 0  ( 0 )   Solids   = 0 ( 0 )
 NBSHAPES    : Solid    = 47  ( 47 )  Shell    = 47  ( 47 )  Face     = 4454  ( 4454 ) 
 STATSHAPE   : Solid    = 80  ( 80 )  Shell    = 80  ( 80 )  Face     = 5356  ( 5356 )   FreeWire = 0  ( 0 ) 
-TOLERANCE   : MaxTol   =    2.371238233  (    2.449305641 )  AvgTol   =  0.001672277308  (  0.002589629313 )
+TOLERANCE   : MaxTol   =     2.37122237  (    2.449305641 )  AvgTol   =  0.002570949956  (  0.002589629313 )
 LABELS      : N0Labels = 52  ( 52 )  N1Labels = 86  ( 86 )  N2Labels = 0  ( 0 )   TotalLabels = 138  ( 138 )   NameLabels = 136  ( 136 )   ColorLabels = 47  ( 47 )   LayerLabels = 0  ( 0 )
 PROPS       : Centroid = 0  ( 0 )  Volume   = 0  ( 0 )  Area     = 0  ( 0 )
 NCOLORS     : NColors  = 11  ( 11 )

tests/de/step_5/A1

@@ -7,11 +7,11 @@ set filename Z8INV5.stp
 
 set ref_data {
 DATA        : Faulties = 0  ( 0 )  Warnings = 0  ( 0 )  Summary  = 0  ( 0 )
-TPSTAT      : Faulties = 0  ( 0 )  Warnings = 121  ( 620 )  Summary  = 121  ( 620 )
-CHECKSHAPE  : Wires    = 15  ( 16 )  Faces    = 18  ( 18 )  Shells   = 1  ( 1 )   Solids   = 0 ( 0 )
-NBSHAPES    : Solid    = 22  ( 22 )  Shell    = 25  ( 24 )  Face     = 1521  ( 1519 ) 
-STATSHAPE   : Solid    = 22  ( 22 )  Shell    = 25  ( 24 )  Face     = 1521  ( 1519 )   FreeWire = 0  ( 0 ) 
-TOLERANCE   : MaxTol   =    7.499684301  (    7.499684301 )  AvgTol   =   0.03357316863  (   0.03544461059 )
+TPSTAT      : Faulties = 0  ( 0 )  Warnings = 120  ( 620 )  Summary  = 120  ( 620 )
+CHECKSHAPE  : Wires    = 15  ( 16 )  Faces    = 17  ( 18 )  Shells   = 1  ( 1 )   Solids   = 0 ( 0 )
+NBSHAPES    : Solid    = 22  ( 22 )  Shell    = 25  ( 24 )  Face     = 1520  ( 1519 ) 
+STATSHAPE   : Solid    = 22  ( 22 )  Shell    = 25  ( 24 )  Face     = 1520  ( 1519 )   FreeWire = 0  ( 0 ) 
+TOLERANCE   : MaxTol   =    7.499684301  (    7.499684301 )  AvgTol   =   0.03452373473  (   0.03544461059 )
 LABELS      : N0Labels = 25  ( 25 )  N1Labels = 23  ( 23 )  N2Labels = 0  ( 0 )   TotalLabels = 48  ( 48 )   NameLabels = 48  ( 48 )   ColorLabels = 0  ( 0 )   LayerLabels = 0  ( 0 )
 PROPS       : Centroid = 0  ( 0 )  Volume   = 0  ( 0 )  Area     = 0  ( 0 )
 NCOLORS     : NColors  = 0  ( 0 )