Incorrect curve is got after Decompose method applying. This method's using should be restrict.
Decomposition is required if intersection curve contains some parts, where U-parameter on quadric surface changes too sharply.
Decompose method is called for Cone and Sphere only (it does not require for Cylinder).
Comments are changed by jgv.
Test case for issue CR24427
Added test case bugs/moddata_3/bug24427_2
Compiler warning is liquidated.
Test is corrected.
Projection of 3d points corresponding to range of edge on 2d curve considered as successful for all cases to except for cases when projection is not made.
Initialization initial values of flags
Modification initial values of flags setting status Done for first and last parameters
Adding new draw-command for issue CR24370
Test case for issue CR24370
DRAW command discrCurve was created to test GCPnts_UniformAbscissa by count of discretization point.
Two bugs in GCPnts_AbscissaPoint were fixed.
DRAW tests for the bug were created.
The intersection between Cone and one of the following surfaces: Cylinder, Sphere, Cone and Torus
is treated as analytical when the axes of the surfaces are collinear.
Test case for issue CR24505
Added test case bugs/modalg_5/bug24204
Modified following test cases:
bugs modalg_3 bug605 - case with bad input data, command "settolerance w1 1.e-7" was added;
bugs modalg_4 bug629 - wrong case, now the algorithm can not build pipes on such profiles, test case was removed;
bugs modalg_4 bug13595_1, bug13595_1 - number of subshapes was has changed;
bugs modalg_5 bug23706_2 - square of resulting face was changed;
bugs modalg_5 bug23870_1, bug23870_2, bug23870_3, bug23870_4, bug23870_5 - the number of subshapes was changed.
Modifications:
1. The validity of the intersection point between edge and face is checked with sum of the tolerance values of the edge and face.
2. The intersection between toroidal surface and one of the following surfaces: Plane, Cylinder, Sphere, Cone or Torus
is treated as analytical in the following cases:
1) Torus and Plane: a. Axes of the surfaces are parallel;
b. Axes of the surfaces are perpendicular and location of the torus is lying on the plane;
2) Torus and Sphere: The location of the sphere is lying on the line made from toruses axis;
3) Torus and Cone, Cylinder or Torus: The axis of the surfaces are collinear.
In all cases the intersection line(s) is(are) circle(s).
Added test cases bugs/modalg_5/bug24470
The intersection between torus with minor radius more than (or equal to) the major radius and any other surface is considered as parametric.
New features:
- class BOPDS_InterfVZ has been added.
Purpose: The class BOPDS_InterfVZ is is to store the information about
the interference of the type vertex/solid.
- class BOPDS_InterfEZ has been added.
Purpose: The class BOPDS_InterfEZ is is to store the information about
the interference of the type edge/solid.
- class BOPDS_InterfFZ has been added.
Purpose: The class BOPDS_InterfFZ is is to store the information about
the interference of the type face/solid.
- class BOPDS_InterfFZ has been added.
Purpose: The class BOPDS_InterfZZ is is to store the information about
the interference of the type solid/solid.
- class BOPDS_DS
-methods
inline BOPDS_VectorOfInterfVZ& BOPDS_DS::InterfVZ()
Purpose: Returns the collection of interferences Vertex/Solid
inline BOPDS_VectorOfInterfEZ& BOPDS_DS::InterfEZ()
Purpose: Returns the collection of interferences Edge/Solid
inline BOPDS_VectorOfInterfFZ& BOPDS_DS::InterfFZ()
Purpose: Returns the collection of interferences Face/Solid
inline BOPDS_VectorOfInterfZZ& BOPDS_DS::InterfZZ()
Purpose: Returns the collection of interferences Solid/Solid
inline Standard_Integer BOPDS_DS::NbInterfTypes()
Purpose: Returns the number of types of the interferences
have been added.
- class BOPDS_Tools
-method
inline Standard_Boolean BOPDS_Tools::IsInterfering
(const TopAbs_ShapeEnum theT)
has been added.
Purpose: Returns true if the type <theT> can be participant of an interference
- class BOPDS_ShapeInfo
-method
inline Standard_Boolean BOPDS_ShapeInfo::IsInterfering()const
has been added.
Purpose: Returns true if the object can be participant of an interference
- class BOPDS_ShapeInfo
-methods
void BOPAlgo_CheckerSI::PerformVZ()
Purpose: Computes Vertex/Solid interferences
void BOPAlgo_CheckerSI::PerformEZ()
Purpose: Computes Edge/Solid interferences
void BOPAlgo_CheckerSI::PerformFZ()
Purpose: Computes Face/Solid interferences
void BOPAlgo_CheckerSI::PerformZZ()
Purpose: Computes Solid/Solid interferences
have been added
Changes:
- class BOPDS_DS
- method:
Standard_Boolean BOPDS_DS::HasInterfShapeSubShapes
(const Standard_Integer theI1,
const Standard_Integer theI2,
const Standard_Boolean theFlag)const
has been modified.
Purpose:
Returns true if the shape with index theI1 is interfered with
- at least one sub-shape of the shape with index theI2 (theFlag=true)
--all sub-shapes of the shape with index theI2 (theFlag=false)
- class BOPDS_Tools
- method:
inline Standard_Integer BOPDS_Tools::TypeToInteger
(const TopAbs_ShapeEnum aType1,
const TopAbs_ShapeEnum aType2)
The method has been extended to treat */Solid interfertences.
- class BOPDS_Iterator
- constructors:
BOPDS_Iterator::BOPDS_Iterator();
BOPDS_Iterator::BOPDS_Iterator
(const Handle(NCollection_BaseAllocator)& theAllocator);
- method:
void BOPDS_Iterator::Prepare();
The constant number of types of the interferences has been changed by
the call: BOPDS_DS::NbInterfTypes();
- class BOPDS_IteratorSI
- method:
void BOPDS_IteratorSI::UpdateByLevelOfCheck(const Standard_Integer theLevel)
The constant number of types of the interferences has been changed by
the call: BOPDS_DS::NbInterfTypes();
- method:
void BOPDS_IteratorSI::Intersect()
The method has been extended to treat */Solid interfertences.
- class BOPAlgo_CheckerSI
- constructor:
BOPAlgo_CheckerSI::BOPAlgo_CheckerSI()
The constant number of types of the interferences has been changed by
the call: BOPDS_DS::NbInterfTypes();
- method:
void BOPAlgo_CheckerSI::SetLevelOfCheck(const Standard_Integer theLevel)
The constant number of types of the interferences has been changed by
the call: BOPDS_DS::NbInterfTypes();
- methods:
void BOPAlgo_CheckerSI::Perform()
void BOPAlgo_CheckerSI::PostTreat()
The methods have been extended to treat */Solid interfertences.
- class BOPAlgo_ArgumentAnalyzer
- method:
void BOPAlgo_ArgumentAnalyzer::TestSelfInterferences()
The method has been extended to treat */Solid interfertences.
Added test case bugs/modalg_5/bug24492
- Fixed invalid presentation of dimension highlight.
- Fixed bug on switching between selection modes. Individual sensitive entities generated for each selection mode.
- Revised selection: AIS_DimensionSelectionMode enumeration added, redundant AIS_DimensionDisplayMode is removed.
- Revised entity owner usage: used standard SelectMgr_EntityOwner for neutral selection, AIS_DimensionOwner for "line", "text" selection modes.
- Made arrows selectable.
- Got rid of predefined arrow angle. The arrow angle is now taken from dimension aspect.
- The 3D text is now centered by bounding box for better alignment.
1. Modified test cases to improve using of Japanese characters
bugs vis bug22149
bugs vis bug22796_2
2. Modified test case bugs vis bug23813 to avoid regression caused by using vdump command with non-default parameters on remote PCs
bugs vis bug23813
3. Behavior change of test case de iges_2 B1 in DEBUG mode on Linux and Windows platforms (OCC24442)
de iges_2 B1
Modification to avoid creation of redundant labels in XCAF for any shapes belonging compound even if colors are not defined for them.
Fix to avoid compiler warning.
Fix for regression for test case de iges_2 A6
Test case for issue CR23921
Refactoring on current master fix for bug 0024008: ShapeAnalysis_Surface causes exception in Geom_OffsetSurface.
And modified test scripts in order to avoid report regressions
Test cases for issue CR24008
Corrected DRAWEXE "vselmode" command.
Added test case.
corrected test cases
- 24293 failed due to initialization view without "name".
- 24374 adjusted, the test case was initially incorrect.
Modified test cases bugs/vis/bug24293 and bugs/vis/bug24374
Fixed creation of extrema curve in debug mode.
Deleted space between ";" and "V" in debug output to make "llength" DRAW funcion work correctly in debug mode.
Deleted TODOs in tests/bugs/modalg_5/bug24327
Deleted TODOs in test cases with improvement in extrema output. Increased cpulimit in de, boolean and perf.
Changes:
class IntTools_FaceFace
- static function:
void CorrectSurfaceBoundaries(const TopoDS_Face& theFace,
const Standard_Real theTolerance,
Standard_Real& theumin,
Standard_Real& theumax,
Standard_Real& thevmin,
Standard_Real& thevmax)
Remove unnecessary broadening of UV-bounds for the faces based on the sperical surfaces.
Test case for issue CR24400
Added test case bugs/modalg_5/bug23708
Improvements in test case de/step_3/B8 (problem in second TODO is not reproduced)
Modified test case de/iges_2/H1 regarding to new reference data
boolean bsection M9 N5
Adjusting test cases in DEBUG mode to current state of master (increase cpulimit and modified TODOs)
bugs modalg_5 bug24327
Added TODO in test case to avoid regression in DEBUG mode caused by integration of 24327
perf bop builface
Increase cpulimit of test case (problem in DEBUG mode)
- Added test cases to check label and arrows positioning of AIS length, angle, radius, diameter dimensions;
- Added new arguments to "vdim" command to modify "flyout", "arrow orientation", "label position" properties;
- Corrected bug: duplication of text label of linear dimensions for the horizontal-centered text.
- Rename and revise argument interface of "vdimension" (vdim) command.
- Correct test cases for new command name and arguments style.
corrected test cases - check with testdiff instead of "checkcolor"
1) Removed confusing part of labeled extension for 3d text.
2) Removed unused "TextOffset" property of AIS_Dimension class, revised function of "ExtensionSize" property.
3) Added options to specify automatic or user-defined arrow orientation and value label positioning to dimension aspect enumerations.
4) Use proper naming: Prs3d_DimensionTextVerticalPosition, Prs3d_DimensionTextHorizontalPosition instead of Prs3d_HorizontalTextAlignment, Prs3d_VerticalTextAlignment.
Correction of label length computing method.
- OpenGl_Flipper class added to provide text flipping.
- Added Graphic3d_Mat4, OpenGl_Mat4 definitions for use with TKOpenGl matrix types.
- Added flipping parameters for dimensions with 3D text labels at AIS_Dimension class.
- Test cases.
