- remove check for selection activation in SelectMgr_SelectionManager::RecomputeSelection;
- given selection mode is now handled properly and single selection mode can be recomputed;
- test case for issue #27523.
Virtual method Generated() inherited from BRepPrimAPI_MakeSweep is overridden in class BRepOffsetAPI_MakePipe, providing information on shapes generated from the profile.
- update status in SelectMgr_SelectionManager::RecomputeSelection:
1) is set to full for all selections;
2) is switched to none only if selection was actually recomputed;
- test case for issue #26870
1. Check face location has been added.
2. Message, if mkplane command fails, has been added.
3. Test case for this issue has been created.
Changes in accordance with the remark.
Small correction of test case for issue CR26687
Improved periodicity handling when trimmed parameters became unclosed or nonperiodic, but underlying geometry closed or periodic.
Added possibility to not perform trim in GeomAdaptor::MakeSurface.
Minor corrections.
Test-case for issue #26196
Algorithm of computation of safe shift value along 2D-line (in order to distance between two points was less than tolerance) has been improved.
Correction of some test cases in accordance with their new behavior.
Take basis surface from trimmed surfaces during IGES writing, because pcurves will be transformed, so trim will be shifted, accorded to new face bounds,
fix updating of seam edge,
change condition of using Segment during exporting periodic BSpline surfaces to IGES (if bounds are not in one period).
Test cases for issue CR26419
Add some workaround to read IGES files with lines, which lengths are less than standard 80.
Test case for issue CR26573
Correction of test cases for issue CR26573
Correction of test case for issue CR26573
Modification to support case when edges on face have incorrect orientation was added.
Modification to support case when wires have intersecting segment was added
Test cases for issue 25553 added; other affected tests corrected (improvements)
Corrected test case
Treat internal edges in proper way to save them in the result.
The test "bugs heal bug26489_4" has been modified to reflect the actual behavior.
Test-case for issue #26635
Check for orientation of the solid corrected to ensure that cycle always finishes.
Test case added: bugs modalg_6 bug26627
Tests boolean volumemaker A3, B5, B7 corrected (improvements)
class BOPAlgo_WireSplitter
- static function:
Standard_Real Angle2D (const TopoDS_Vertex& aV,
const TopoDS_Edge& anEdge,
const TopoDS_Face& myFace,
const GeomAdaptor_Surface& aGAS,
const Standard_Boolean bIsIN)
The treatment of circles has been chenged to prevent
the loss of accuracy due to small differences in large values.
Small correction of test case for issue CR26582
Test case for issue CR26582
Conflicts:
src/BOPAlgo/BOPAlgo_WireSplitter_1.cxx
- added interface for changing sensitivity of a particular selection through both local and interactive context;
- added corresponding methods for changing sensitivity to SelectMgr_SelectionManager, SelectMgr_Selection and SelectBasics_SensitiveEntity;
- option -setSensitivity was implemented in vaspects Draw command;
- test case for issue #26462
Current algorithm ignores found triangles intersection (IntPolyh_PMaillageAffinage) and, consequently, cannot find start point for intersection line. Branch fixes this problem.
Test case for issue CR26251
1. JoinWLines algorithm has been improved.
2. Reference to the V-boundaries is deleted when computing step.
3. Decreasing the tolerance when computing parameters of WLine.
4. Adding boundary point is forbidden if it lies in prolongation of found ones.
5. Possible reason of exception has been eliminated.
6. Processing of critical point has been improved.
Test cases for this issue have been created.
Correction of some test case(s).
Test case bugs/modalg_6/bug26310_4 is added
Update of test-cases for issue #26310
- boolean volumemaker C1: the problems disappeared on Windows are still present on Linux
- boolean volumemaker F8: improvement on Linux found on master due to #24682 does not happen in OCCT 6.9.1, since #24682 is not included
Modification of the translation of the face based on the toroidal surface with negative major radius was made.
Seems that such face is considered by "Solid Works" and "ProE wildfire 5.0" systems as face having reversed orientation.
This step file was written by "Solid Works 2014".
- bugs modalg_6 bug26238: check real values with tolerance to avoid false failures due to numeric deviations
- draft angle G8: removed TODOs that do not exhibit in 6.9.1 branch
- boolean gdml_private O1: unstable
Method for pre-analysis of input data added (CheckInputData).
Now it is possible to work with Error() function, which return error code.
Tests corrected according to changed error appearance.
Exception is raised during reading step file containing p-curve having not-unique last knot.
Modification correcting misprint during computation new numbers of poles for such case was made in the file StepToGeom_MakeBSplineCurve.pxx
Protection against exception was made in the file StepToTopoDS/StepToTopoDS_TranslateEdge.cxx.
Warning message was added in the file StepToTopoDS_TranslateEdgeLoop.cxx.
Test case for issue CR26289
- de iges_1 L8,P7 - corrected according to changes made in #24682, with minor amendment of number of labels
- heal wire_tails_real A5 - corrected as in master
- offset wire_unclosed_outside_0_025 B4 - correcting according to actual state (looks better)
- de step_3 F1 - corrected according to actual state, see #26597
- de iges_1 N9 - reverted to state before integration of #25593 (zero-area face is created due to self-intersecting wire)
