1. The package BOPCol has been fully removed:
- *BOPCol_BaseAllocator* is replaced with *Handle(NCollection_BaseAllocator)*;
- *BOPCol_BoxBndTree* is replaced with *BOPTools_BoxBndTree*;
- *BOPCol_Box2DBndTree* is removed as unused;
- *BOPCol_DataMapOfIntegerInteger* is replaced with *TColStd_DataMapOfIntegerInteger*;
- *BOPCol_DataMapOfIntegerListOfInteger* is replaced with *TColStd_DataMapOfIntegerListOfInteger*;
- *BOPCol_DataMapOfIntegerListOfShape* is replaced with *TopTools_DataMapOfIntegerListOfShape*;
- *BOPCol_DataMapOfIntegerMapOfInteger.hxx* is removed as unused;
- *BOPCol_DataMapOfIntegerReal* is replaced with *TColStd_DataMapOfIntegerReal*;
- *BOPCol_DataMapOfIntegerShape* is replaced with *TopTools_DataMapOfIntegerShape*;
- *BOPCol_DataMapOfShapeBox* is replaced with *TopTools_DataMapOfShapeBox*;
- *BOPCol_DataMapOfShapeInteger* is replaced with *TopTools_DataMapOfShapeInteger*;
- *BOPCol_DataMapOfShapeListOfShape* is replaced with *TopTools_DataMapOfShapeListOfShape*;
- *BOPCol_DataMapOfShapeReal* is replaced with *TopTools_DataMapOfShapeReal*;
- *BOPCol_DataMapOfShapeShape* is replaced with *TopTools_DataMapOfShapeShape*;
- *BOPCol_DataMapOfTransientAddress* is removed as unused;
- *BOPCol_IndexedDataMapOfIntegerListOfInteger* is removed as unused;
- *BOPCol_IndexedDataMapOfShapeBox* is removed as unused;
- *BOPCol_IndexedDataMapOfShapeInteger* is removed as unused;
- *BOPCol_IndexedDataMapOfShapeListOfShape* is replaced with *TopTools_IndexedDataMapOfShapeListOfShape*;
- *BOPCol_IndexedDataMapOfShapeReal* is removed as unused;
- *BOPCol_IndexedDataMapOfShapeShape* is replaced with *TopTools_IndexedDataMapOfShapeShape*;
- *BOPCol_IndexedMapOfInteger* is replaced with *TColStd_IndexedMapOfInteger*;
- *BOPCol_IndexedMapOfOrientedShape* is replaced with *TopTools_IndexedMapOfOrientedShape*;
- *BOPCol_IndexedMapOfShape* is replaced with *TopTools_IndexedMapOfShape*;
- *BOPCol_ListOfInteger* is replaced with *TColStd_ListOfInteger*;
- *BOPCol_ListOfListOfShape* is replaced with *TopTools_ListOfListOfShape*;
- *BOPCol_ListOfShape* is replaced with *TopTools_ListOfShape*;
- *BOPCol_MapOfInteger* is replaced with *TColStd_MapOfInteger*;
- *BOPCol_MapOfOrientedShape* is replaced with *TopTools_MapOfOrientedShape*;
- *BOPCol_MapOfShape* is replaced with *TopTools_MapOfShape*;
- *BOPCol_PListOfInteger* is removed as unused;
- *BOPCol_PInteger* is removed as unused
- *BOPCol_SequenceOfPnt2d* is replaced with *TColgp_SequenceOfPnt2d*;
- *BOPCol_SequenceOfReal* is replaced with *TColStd_SequenceOfReal*;
- *BOPCol_SequenceOfShape* is replaced with *TopTools_SequenceOfShape*;
- *BOPCol_Parallel* is replaced with *BOPTools_Parallel*;
- *BOPCol_NCVector* is replaced with *NCollection_Vector*;
2. The class *BOPDS_PassKey* and containers for it have been removed as unused;
3. The unused containers from *IntTools* package have been removed:
- *IntTools_DataMapOfShapeAddress* is removed as unused;
- *IntTools_IndexedDataMapOfTransientAddress* is removed as unused;
4. The container *BiTgte_DataMapOfShapeBox* is replaced with *TopTools_DataMapOfShapeBox*;
5. The class *BOPTools* has been removed as duplicate of the class *TopExp*;
1. Unify the faces classification procedure of the methods BOPAlgo_BuilderSolid::PerformInternalShapes() and BOPAlgo_Builder::FillIn3DParts() using the latter as a base.
The new method BOPAlgo_Tools::ClassifyFaces() has been created for that. Both methods mentioned above have been updated to use the new one.
2. Forced intersection of the edges after enlarge of the tolerance values of their vertices during the operation has been added into BOP's intersection algorithm (BOPAlgo_PaveFiller).
BOPAlgo_Tools::PerformCommonBlocks() method has been updated to avoid loosing faces of the already created Common blocks.
As a result the case "boolean gdml_private ZF6" became more stable, because the intermediate result is no longer invalid.
Additional test cases have been added to verify this improvement (bugs modalg_7 bug29322_*)
3. When building PCurves for edges on faces, check the existing PCurves on its validity for periodic surfaces and adjust PCurves if necessary.
The improvement helps to produce the valid result in the test case "bugs moddata_1 bug152".
4. Avoid creation of empty Edge-Edge interference if the intersection point is lying close to a shared vertex.
The improvement helps obtain the valid result of the "bopcheck" operation in the test case "bugs modalg_7 bug27683".
Adjustment of the test case to current behavior:
- Avoid usage of the self-intersecting torus in the test case "boolean gdml_public A9".
- Fix the input shape in the test case "boolean bopfuse_complex H1" to provide valid result.
- Test cases "bugs moddata_1 bug152_1 bug152_2" have been unified into single test case "bugs moddata_1 bug152". Now, the case rebuilds invalid input data and performs all types of Boolean operations.
- Change the test case "bugs modalg_7 bug22750" to produce valid intermediate results used in subsequent operations as arguments.
- The following test cases are improvements:
- "boolean volumemaker D8"
- "boolean volumemaker G1"
- "bugs modalg_7 bug27683"
0. Basic tools for defining classes representing alerts (errors, warnings etc.) and collecting them during execution of algorithms are added in Message package.
1. Refactoring of the Error/Warning reporting system of the algorithms in Boolean Component.
To dump the description of the Error/Warning status of the algorithm the DumpErrors/DumpWarnings method should be called.
Also, the methods GerErrorMsg(int Error) and GetWarningMsg(int Warning) have been implemented to get the description for the given Error/Warning.
All Error/Warning statuses are now listed in the enumeration ErrorStatusEnum/WarningStatusEnum of the algorithm.
It is also possible to get the shapes for which the warning has been set by using the method GetWarningShapes().
2. The new class BOPAlgo_Options has been created to unify the options of the BOPAlgo_* and BRepAlgoAPI* algorithms.
3. The new checks across the algorithms have been added to detect and report errors and warnings.
4. Test cases
boolean bopcut_complex B9 E1 E5 E8
boolean bopfuse_complex B4 B5 C9 D1 D4 D5 D6 D7
have been rewritten to use Cells Builder algorithm instead of Boolean Operations algorithm, because latter always returns error "Unsupported Boolean operation" for these cases.
5. New chapter has been added in the user guide for Boolean Operations - Error / Warning reporting system.
6. Added comment to NCollection_List::Remove(Iterator&)
The methods PerformVerticesEE() and PerformVerticesEF() of the class BOPAlgo_PaveFiller have been replaced with the new PerformNewVertices() method.
While splitting the Pave Blocks with extra paves, check that the new Pave Blocks have the valid intersection range. If the new Pave Block does not have such range do not create it and unify its vertices making SD vertex.
Re-computation of the Shrunk Data for the modified Pave Blocks. The new method BOPDS_DS::IsValidShrunkData(const Handle(BOPDS_PaveBlock)& thePB) has been implemented to check that the Shrunk Data of the Pave Block is still valid. It may become invalid in case the tolerance values of the vertices of the Pave Block have been modified.
The test case bugs/modalg_6/bug27448_2 has been marked as BAD, because it uses the invalid shapes as inputs for BOP.
Test cases for the issue 0028690.
1. The methods PerformVZ, PerformEZ, PerformFZ and PerformZZ have been transferred from BOPAlgo_PaveFiller to BOPAlgo_CheckerSI class
to perform intersection of sub-shapes with solids only in self-intersection mode.
2. The checks for solids built from the same (shared) faces have been added into methods building the result of Boolean operations -
BOPAlgo_BOP::BuildRC() and BOPAlgo_BOP::BuildSolid().
3. Since the NonDestructive mode is now natively supported by the BOPAlgo_PaveFiller the methods providing the support of this mode by CheckerSI
(BOPAlgo_CheckerSI::PrepareCopy() and BOPAlgo_CheckerSI::PostTreatCopy()) are not needed and have been removed.
4. The pairs of sub-shapes with interfering bounding boxes are now sorted before real intersection to guarantee the constant order of
intersection of sub-shapes and produce more stable result. The class BOPDS_PassKey has been replaced with simpler class BOPDS_Pair.
5. The class BOPDS_SubIterator has been refactored.
6. Test cases for the issue.
7. Adjustment of the test case boolean volumemaker D2.
BOPAlgo_CheckerSI crashed due to building of pcurve for an edge not lying on surface. The fix avoids building of pcurves in this algorithm.
The new flag has been added in BOPAlgo_PaveFiller class (method SetAvoidBuildPCurve). It tells whether to avoid building pcurves. It is worth to set if the result is not used to create splits of faces, as in example with BOPAlgo_CheckerSI.
Several improvements have been made in BO code to fix the bug:
- Create empty edge-edge interference if intersection is close to an end vertex. This will help to avoid creation of unnecessary edge-face intersections.
- Improve PutPaveOnCurve() method to join nearly located vertices when they are put on the same section curve.
- Add processing of same-domain vertices for section edges in UpdatePaveBlocks() method.
- Improve the method CorrectWires() in order to not increase vertex tolerance if it will cover the major part of an edge.
- Replace vertices of section edges by same-domain equivalents.
- In the algorithm BOPAlgo_WireSplitter, correct angles computation and evaluation, taking into account periodicity.
- Modify PostTreatFF to properly take into account the orientations of coinciding section edges.
- In IntTools_Context::ComputePE, check distance from the point to vertices of the edge if the projection to the curve is failure.
Tests update:
- test offset\faces_type_i\C9 has been updated; now instead of returning bad shape it returns null result.
Notes for porting:
- Modify BopAlgo_PaveFiller so that on output each interference refers to the new vertex that will hit in the result (same-domain of the initial new vertex).
- Make the method BOPDS_DS::Index() returning valid index for new shapes.
// eliminate compile warning on VC14
1. Unification of the usage of the BRepAdaptor_Surface in Boolean Operations algorithm.
For each face when it is necessary the Adaptor is initialized only once and stored in Context.
For that purpose the new IntTools_Context::SurfaceAdaptor(const TopoDS_Face&) method has been implemented.
To provide possibility to take the Adaptor from the context, the context has been added as
a parameter in following methods:
BOPTools_AlgoTools::MakePCurve()
BOPTools_AlgoTools::Sence()
BOPTools_AlgoTools2D::BuildPCurveForEdgeOnFace()
BOPTools_AlgoTools2D::PointOnSurface
BOPTools_AlgoTools2D::CurveOnSurface
BOPTools_AlgoTools2D::AdjustPCurveOnFace
BOPTools_AlgoTools2D::Make2D
BOPTools_AlgoTools2D::MakePCurveOnFace
BOPTools_AlgoTools3D::GetNormalToFaceOnEdge
It is also possible now to pass the context into BOPAlgo_WireSplitter algorithm.
Also, the new IntTools_Context::UVBounds(const TopoDS_Face&) method
has been implemented to get the UV bounds of a face.
2. Additional improvement is a calculation of reduced intersection range only for the intersection
type VERTEX during computation of Edge/Face interference.
3. The methods IntTools_EdgeFace::Prepare() and IntTools_EdgeFace::FindProjectableRoot()
and the fields IntTools_EdgeFace::myProjectableRanges and IntTools_EdgeFace::myFClass2d
have been removed as obsolete.
4. Test cases for the issue.
The Gluing operation is an additional option for the algorithms in the Boolean Component
such as General Fuse, Boolean operations, Section operation, Maker Volume and Cells Builder algorithms.
The Gluing options have been designed to speed up the computation of the interference among arguments of the operations on special cases,
in which the arguments may be overlapping but do not have real intersections between their sub-shapes.
This option cannot be used on the shapes having real intersections, like intersection vertex between edges,
or intersection vertex between edge and a face or intersection line between faces.
The Gluing option is an enumeration implemented in BOPAlgo_GlueEnum.hxx. There are following items in the enum:
* BOPAlgo_GlueOff - default value for the algorithms, Gluing is switched off;
* BOPAlgo_GlueShift - Glue option for shapes with partial coincidence;
* BOPAlgo_GlueFull - Glue option for shapes with full coincidence.
For setting the Gluing options for the algorithm it is just necessary to call the SetGlue(BOPAlgo_GlueEnum) method with appropriate Glue value.
For using this option in DRAW the command bglue has been implemented:
* 0 - default value, Gluing is off;
* 1 - for partial coincidence;
* 2 - for full coincidence
Elimination of the warnings.
When fuzzy option is in force prevent increasing tolerance of input shapes. Instead pass increased by fuzzy value the tolerances of sub-shapes everywhere where it is needed by intersection algorithms.
The following changes in API have been made:
- The methods SetFuzzyValue and FuzzyValue have been moved from the classes BOPAlgo_ArgumentAnalyzer, BOPAlgo_Builder, and BOPAlgo_PaveFiller to the base class BOPAlgo_Algo.
- The public method BOPDS_DS::VerticesOnIn has been renamed to SubShapesOnIn, and the new output parameter theCommonPB has been added.
- In BOPTools_AlgoTools, a new argument "theFuzzyValue" has been added in the methods ComputeVV and AreFacesSameDomain.
- In IntTools_Context, a new argument "theFuzzyValue" has been added in the methods ComputeVE and ComputeVF.
- The methods SetFuzzyValue and FuzzyValue have been added in the classes IntTools_EdgeEdge, IntTools_FaceFace.
- In the class IntTools_EdgeFace, the methods SetTolE, SetTolF, TolE, TolF have been removed, and the methods SetFuzzyValue, FuzzyValue have been added.
- The new argument "theTol" has been added in the method IntTools_WLineTool::DecompositionOfWLine.
Some improvements in algorithms have been made during fighting with regressions:
- Correct initialization of pave blocks for degenerated edges.
- In BOPAlgo_PaveFiller::MakeBlocks(), filter out paves on intersection curve that were put on the curve accidentally due to wide range of E-F intersection vertex.
- In the method IntTools_Tools::ComputeTolerance the margin added to the computed tolerance has been increased up to 0.001%.
- The method BOPAlgo_PaveFiller::PutPaveOnCurve has been corrected in order to use the original vertex tolerance instead of the value increased during putting it on other curves.
- The new method BOPDS_PaveBlock::RemoveExtPave has been added.
- The vertex tolerance computation in BOPTools_AlgoTools::CorrectCurveOnSurface has been improved, taking into account intersection segments between p-curves (to avoid regression on "bugs modalg_6 bug22794").
- Improve IsExistingPaveBlock to make more stable catching of coincidence of common block with section curve (against regression "bugs modalg_4 bug697_2" on Linux).
Test case for the bug has been added.
The following test cases have been updated as improvements:
boolean gdml_private ZH2 ZI7 ZJ7
boolean volumemaker C4
The test case bugs/modalg_4/pro19653 has been corrected to make it stable. See comment inside the script for details.
The test case bugs/modalg_6/bug25880 has been corrected to suppress wrong bfuse commands.
The test bugs/modalg_6/bug26954_3 has been corrected to compare the result with more precise reference value.
The "faulty" TODO in boolean/volumemaker/A8 has been made actual for Linux as well.
//Eliminate compilation error on Linux.
0026796: The result of General Fuse operation is self-intersecting shape
The fix forces creation of new sub-shapes (vertex, edge) when the tolerance of some sub-shape of an argument is to be increased.
This new behavior is turned off by default. It can be turned on using two ways:
1) Setting 'locking' flag of the arguments.
2) Calling the method SetNonDestructive(Standard_True) of the API classes.
Various bug fixes in the algorithm:
- Compute correct tolerance values for intersections of type Line/Line, Line/Plane, Plane/Plane.
- In case of Line/Plane intersection check if line's vertices lie on the plane.
- Do not allow decreasing of the tolerance value of the Line/Line intersection vertex.
- In IntTools_EdgeEdge, call the method FindParameters with proper 3D tolerance of the curve.
- Force making copy of a degenerated edge if its vertex is touched but no 2D intersection with other curves is found.
- Remove pave blocks both ends of which became referring to the same vertex after vertices substitution.
- Avoid exception in IntTools_Context::IsVertexOnLine if Extrema is not done.
- Reduce tolerance of vertex/edge using actual distances to interfered shapes if it was increased due to line/line, line/plane, or plane/plane small intersection angle.
- Update tolerance of edges to reach all representations in a common block.
- In V-E intersections, check if a vertex hits beyond shrunk range, in such case create V-V interference.
- Do not put a section edge to the result if it becomes to be a micro edge after updating its vertex.
- Correctly make vertices same-domain during the work of MakeBlocks.
- Decrease shrunk range at least on a Precision::Confusion() in addition to vertex tolerance.
- Add Confusion to bounding boxes of new shapes in DS
- Add tolerance Precision::Confusion() to compare distances of touching cases to fix regressions.
TODO marks have been removed from (or modified in) the following test cases (Improvements):
boolean bsection M3 N2 R2
boolean gdml_private B6 C2 C6 G7 I6 F6 J1 J4 M7 N1 N8 N9 O3 O4 O6 O8 O9 P1 P2 P5 Q1 Q3 Q5 S9 T2 U4 U5 U9 ZB5 ZB6 ZC1 ZC5 ZD3 ZD6 ZD7 ZH2 ZH5 ZI2 ZI5 ZI7 ZI9 ZJ3 ZJ4 ZJ7 F8 I6 G1
boolean volumemaker A5 A6 B3 B4 B7 B9 D3 D4 D7 F1
boolean bopcut_2d D5
bugs modalg_5 bug25043
bugs modalg_2 bug472_1 bug472_2 bug472_3
Test cases updated because they are still bad but can be accepted as non-regression:
boolean volumemaker C4 A3 A7 E6
bugs modalg_1 bug10232
boolean bsection N2
Put new TODO in the scripts:
bugs modalg_5 bug25232_9
bugs modalg_6 bug26619
bugs modalg_1 buc60462_2
bugs modalg_4 bug772
For the following tests the result in fix became better, so take fix result as the reference:
bugs modalg_5 bug24628
bugs modalg_6 bug26954_3
boolean volumemaker A4 B5 B6 C3 C8 D2 D5 F2
bugs modalg_2 bug472_2
bugs modalg_1 buc60776_1
- Add the method SetNonDestructive to API classes of user level
Automatic upgrade of OCCT code by command "occt_upgrade . -nocdl":
- WOK-generated header files from inc and sources from drv are moved to src
- CDL files removed
- All packages are converted to nocdlpack
Forward declaration of TCollection instances as classes are replaced by inclusion of corresponding header.
Cyclic dependencies between declaration of collection class and its item are resolved by forward declaring a class in collection header.
I. New features:
1.1. class BOPAlgo_PaveFiller
method:
void BOPAlgo_PaveFiller::SetArguments(const TopTools_ListOfShape& theLS)
has been added to provide the setting argumemts through
TopTools_ListOfShape
1.2. class BOPAlgo_Builder
method:
void BOPAlgo_Builder::SetArguments(const TopTools_ListOfShape& theLS)
has been added to provide the setting argumemts through
TopTools_ListOfShape
1.3. class BOPAlgo_BOP
method:
void BOPAlgo_BOP::SetTools(const TopTools_ListOfShape& theLS)
has been added to provide the setting tools through
TopTools_ListOfShape
1.4. class BRepAlgoAPI_BuilderAlgo
construcror:
BRepAlgoAPI_BuilderAlgo::BRepAlgoAPI_BuilderAlgo
(const BOPAlgo_PaveFiller& aPF)
has been added to provide the construction
of the object using BOPAlgo_PaveFiller object
method:
void BRepAlgoAPI_BuilderAlgo::SetArguments
(const TopTools_ListOfShape& theLS)
has been added to provide the setting argumemts
method:
const TopTools_ListOfShape& BRepAlgoAPI_BuilderAlgo::Arguments()const
has been added to provide access to the argumemts
1.5. class BRepAlgoAPI_BooleanOperation
method:
void BRepAlgoAPI_BooleanOperation::SetTools
(const TopTools_ListOfShape& theLS)
has been added to provide the setting tools
method:
const TopTools_ListOfShape& BRepAlgoAPI_BooleanOperation::Tools()const
has been added to provide access to the tools
1.6. class BRepAlgoAPI_Common
construcror:
BRepAlgoAPI_Common::BRepAlgoAPI_Common
(const BOPAlgo_PaveFiller& aPF)
has been added to provide the construction
of the object using BOPAlgo_PaveFiller object
1.7. class BRepAlgoAPI_Cut
construcror:
BRepAlgoAPI_Cut::BRepAlgoAPI_Cut
(const BOPAlgo_PaveFiller& aPF)
has been added to provide the construction
of the object using BOPAlgo_PaveFiller object
1.8. class BRepAlgoAPI_Fuse
construcror:
BRepAlgoAPI_Fuse::BRepAlgoAPI_Fuse
(const BOPAlgo_PaveFiller& aPF)
has been added to provide the construction
of the object using BOPAlgo_PaveFiller object
1.9. class BRepAlgoAPI_Section
construcror:
BRepAlgoAPI_Section::BRepAlgoAPI_Section
(const BOPAlgo_PaveFiller& aPF)
has been added to provide the construction
of the object using BOPAlgo_PaveFiller object
1.10. class BOPTest
method:
void BOPTest::APICommands(Draw_Interpretor& theCommands)
has been added to provide tcl commands to launch the algorithms
implemented in BRepAlgoAPI package using DRAWEXE application.
Commands:
>bapibuild r
performs General Fuse algorithm.
r -the result of the operation
>bapibop r type
performs Boolean Operation agorithm
r -the result of the operation
type -type of the operation:
0-common
1-fuse
2-cut
3-cut21
4-section
method:
void BOPTest::OptionCommands(Draw_Interpretor& theCommands)
has been added to provide tcl commands to set/get the options that is
necessary for the algorithms implemented in BRepAlgoAPI package.
Commands:
>boptions
dump the state of current options
>brunparallel [0/1]
1 -sets the parallel mode of the computations
0 -sets the sequential mode of the computations
>bfuzzyvalue value
sets the fuzzy value
-------------------------------------------------------------------------------------------------------------
II. Changes:
II.1. class BRepAlgoAPI_BuilderAlgo
methods:
const TopTools_ListOfShape& BRepAlgoAPI_BuilderAlgo::Generated
(const TopoDS_Shape& aS)
const TopTools_ListOfShape& BRepAlgoAPI_BuilderAlgo::Modified
(const TopoDS_Shape& aS)
Standard_Boolean BRepAlgoAPI_BuilderAlgo::IsDeleted
(const TopoDS_Shape& aS)
Standard_Boolean BRepAlgoAPI_BuilderAlgo::HasModified() const
Standard_Boolean BRepAlgoAPI_BuilderAlgo::HasGenerated() const
Standard_Boolean BRepAlgoAPI_BuilderAlgo::HasDeleted() const
has been redefined to provide access to the history
II.1. class BOPTest
method:
void BOPTest::APICommands(Draw_Interpretor& theCommands)
has been added to provide tcl commands to launch the algorithms
implemented in BRepAlgoAPI package using DRAWEXE application.
method:
void BOPTest::OptionCommands(Draw_Interpretor& theCommands)
has been added to provide tcl commands to set/get the options that is
necessary for the algorithms implemented in BRepAlgoAPI package.
II.2. class BRepAlgoAPI
method:
void BRepAlgoAPI::DumpOper(const Standard_CString theFilePath,
const TopoDS_Shape& theShape1,
const TopoDS_Shape& theShape2,
const TopoDS_Shape& theResult,
BOPAlgo_Operation theOperation,
Standard_Boolean isNonValidArgs)
has been removed. The contents has been shifted into the file:
BRepAlgoAPI_BooleanOperation.cxx
II.3. classes QANewModTopOpe_Glue, QANewModTopOpe_Intersection
the modifications have been done to provide the consistency with the
modifications in BRepAlgoAPI package [I].
-------------------------------------------------------------------------------------------------------------
III. Modified entities:
packages:
BOPAlgo
BRepAlgoAPI
BOPTest
QANewModTopOpe
Test cases for issue CR25614
Implementation of Fuzzy Boolean operations. Such operations allow to perform Boolean operations on the shapes
with near-coincidence between the entities of these shapes, i.e. between shapes in which some entities from one shape
are intended to be coincide with some entities from the other, but the coincidence is not precise.
API for Boolean operations has been improved to have a possibility to add new options.
Modified entities:
1. New option of setting additional tolerance have been added to the following classes:
class BOPAlgo_ArgumentAnalyzer
class BOPAlgo_BOP
class BOPAlgo_Builder
class BOPAlgo_MakerVolume
class BOPAlgo_PaveFiller
class BOPDS_DS
class BRepAlgoAPI_BooleanOperation
class BRepAlgoAPI_Check
class BRepAlgoAPI_Common
class BRepAlgoAPI_Cut
class BRepAlgoAPI_Fuse
class BRepAlgoAPI_Section
2. Following draw commands have been modified to support new functionality:
BOP commands:
bop b1 b2 [tol]
bcommon r b1 b2 [tol]
bcut r b1 b2 [tol]
bfuse r b1 b2 [tol]
bsection r s1 s2 [-n2d/-n2d1/-n2d2] [-na] [tol]
mkvolume r b1 b2 ... [-c] [-ni] [-s] [tol]
bfillds [-s -t] [tol]
Check commands:
bopcheck Shape [level of check: 0 - 9] [-t -s] [-tol tol]
bopargcheck [-F/O/C/T/S/U] [/R|F|T|V|E|I|P|C|S]] [#BF] [-tol tol]
3. Two new classes have been added to API to provide the root interface for algorithms
class BRepAlgoAPI_Algo
class BRepAlgoAPI_BuilderAlgo
Fix to eliminate the warning.
Test-cases for issue #25477
1. class BOPDS_Iterator
method:
void BOPDS_Iterator::Intersect()
The ttreatment of solid/* interferences has been added.
2 class BOPAlgo_PaveFiller
protected methods:
void BOPAlgo_PaveFiller::PerformVZ()
void BOPAlgo_PaveFiller::PerformEZ()
void BOPAlgo_PaveFiller::PerformFZ()
void BOPAlgo_PaveFiller::PerformZZ()
has been added.
The methods are to Compute
Vertex/Solid
Edge/Solid
Face/Solid
Solid/Solid
interferences.
3. class BOPAlgo_PaveFiller
protected method:
void BOPAlgo_PaveFiller::PerformFF()
Empty interferences has not been added in the interferences' table
4. class BOPAlgo_CheckerSI
protected methods:
void BOPAlgo_CheckerSI::PerformVZ()
void BOPAlgo_CheckerSI:PerformEZ()
void BOPAlgo_CheckerSI::PerformFZ()
void BOPAlgo_CheckerSI::PerformZZ()
has been removed.
5. class BOPAlgo_BOP
protected method:
void BOPAlgo_BOP::BuildRC()
void BOPAlgo_BOP::BuildSolid()
changed to treat non-interferred solids and keep it in the result as they were
Test case for issue #25242
class: BOPAlgo_Algo
method:
void BOPAlgo_Algo::SetProgressIndicator
(const Handle(Message_ProgressIndicator)& theObj)
Purpose: Set the Progress Indicator object <theObj>.
method:
void BOPAlgo_Algo::UserBreak() const
Purpose: Breaks the execution if the break signal is indicated.
Classes BOPInt_Context, BOPInt_ShrunkRange, BOPInt_Tools have been removed.
Package BOPInt has been removed
Classes IntTools_Context, IntTools_ShrunkRange have been added to replace corresponding BOPInt_ classes.
The classes provide same functionality as corresponding BOPInt_ classes.
Classes :
BOPAlgo_ArgumentAnalyzer
BOPAlgo_Builder
BOPAlgo_BuilderArea
BOPAlgo_BuilderFace
BOPAlgo_BuilderSolid
BOPAlgo_CheckerSI
BOPAlgo_PaveFiller
BOPAlgo_ShellSplitter
BOPTools_AlgoTools3D
BRepFill_TrimShellCorner
IntTools_BeanFaceIntersector
IntTools_EdgeFace
IntTools_FaceFace
IntTools_Tools
have been modified to use new classes IntTools_Context IntTools_ShrunkRange
Class IntTools_Tools has been modofied to provide the functionality that was in BOPInt_Tools.
void BOPAlgo_CheckerSI::PrepareCopy()
has been added.
Purpose:
- provides the copy of the argument
- provides links between the copy and the original
- protected method:
void BOPAlgo_CheckerSI::PostTreatCopy()
has been added.
Purpose: provides post treat actions wit the copy.
void BOPAlgo_PaveFiller::Perform()
The try/catch mechanism is used inside the method
Standard_Integer bopcheck
(Draw_Interpretor& di, Standard_Integer n, const char** a )
The redundant copying is removed.
Standard_Integer bopargcheck
(Draw_Interpretor& di, Standard_Integer n, const char** a )
The redundant copying is removed.
packages:
BOPAlgo
BOPTest
Test cases for issue CR24620
Small correction of text case for issue CR24620
License statement text corrected; compiler warnings caused by Bison 2.41 disabled for MSVC; a few other compiler warnings on 54-bit Windows eliminated by appropriate type cast
Wrong license statements corrected in several files.
Copyright and license statements added in XSD and GLSL files.
Copyright year updated in some files.
Obsolete documentation files removed from DrawResources.
Modifications:
- BRepOffset/BRepOffset_Tool.cxx, Features and Fillets algorithms have been ported on new BO algorithm.
- Old BO algorithm, that was implemented in BOP, BooleanOperations and BOPTools packages, has - been deleted.
- Porting SALOME algorithms to new BOP algorithm.
- Fixing regressions. Rebased on current master.
- Corrections in post treatment of section edges;
- Corrections in the accordance with the bug 0023293;
- Small corrections in the bopcheck and bopargcheck commands.
- NCollection maps have been replaced by NCollection indexed maps to guarantee the constant order of sub-shapes in the result of boolean operation.
- Test case feat featprism M9 has been fixed.
- Test cases chl 902 E3 H3 have been fixed (corrections in the treatment of section edges).
- Test cases caf driver B6 B7, caf named_shape F6 F7 have been modified according to the new order of sub-shapes in the result of boolean operation.
- Test cases blend buildevol G1, blend simple K4, bcommon_complex C7, feat featprism L6 have been modified as they are improvements.
- Test case boolean bsection A3 has been modified according to the new syntax of the bsection command.
- Test cases boolean bfuse_complex J1 P9 have been fixed (the function IsInternalFace has been modified to use the function GetFaceOff);
- Test case chl 902 H3 has been fixed (changes in the treatment of section edges);
- Test case boolean bsection D8 has been modified (removed TODO statement);
- Test case boolean bsection A3 has been modified (as the shapes have been changed).
- Added correction of the tolerance values of the shapes according to the bug 0023610.
- test cases:
boolean bcommon_complex C3,
boolean bcut_complex F2 O7,
boolean bfuse_complex C4 C5 E4,
boolean bsection B6 M8 M9 N4 N5 N7,
boolean bfuse_simple ZP6,
draft angle G8,
feat featprism S2
have been marked as invalid according to the bug 0022033;
- New value of result has been set in the test cases :
boolean bopsection D4
boolean bsection R8
as it is correct.
- test case bugs modalg bug23472 has been rewritten according to the new format of bsection command.
- The classes IntTools_Context and IntTools_ShrunkRange have been replaced by BOPInt_Context and BOPInt_ShrunkRange accordingly.
- The new class BRepAlgoAPI_Check has been added according to the bug 0023648.
- Some regressions have been fixed.
- The following test cases have been marked as invalid or rewritten
bugs modalg buc60462_2, 60531_2, 60776_1, bug472_1, bug472_2, bug472_3, bug497_3, bug62
bugs moddata bug26_1, bug26_2,
- The test case bugs modalg buc60533 has been rewritten to use the general fuse algorithm for building the result.
- The new value of the result has been set in the test case bugs modalg 60776_2.
- The following test cases have been rewritten according to the new format of the bsection command
bugs modlag fra62369, pro18892
bugs moddata bug75_1, bug75_2
- Corrected BRepAlgoAPI_Check.
- Removed package BOPTColStd.
- Rewritten test cases caf named_shape F8 F9.
- Removed unnecessary comments.
- Corrected the following test scripts :
boolean bcut_complex(012) O3 O4 O5 O6 O8
boolean bfuse_complex(013) O5 O6 P8
boolean bopcommon_complex(021) D8 D9
boolean bopfuse_complex(022) H1 J6
boolean boptuc_complex(024) D5
bugs modalg(006) bug399 bug497_1
feat featprism(003) C4
- Corrections in the treatment of section edges (putting paves on the curves);
- Corrections in BRepOffset_Tool;
- The following test cases have been rewritten according to the new format of the bsection command
bugs modalg bug6502, bug6554, bug6766_1, bug6766_3
- The new value of the result has been set in the following test cases
bugs modalg bug1255, bug1255_1
- The following test cases have been marked as invalid or rewritten
bugs modalg bug472_2, bug472_3, bug825_2
bugs moddata bug10603, bug152_1, bug152_2, bug3721_1, bug3721_2, bug3721_3
- The following test cases have been rewritten as improvements
bugs modalg bug693, bug693_1, bug817_1
bugs moddata bug3721_5, bug3721_6, bug6862_3, bug6862_4, bug6862_6
- Test cases bugs modlag buc60787_1, buc60787_2, buc60788_2, buc60788_3 have been corrected.
- Fixed some SALOME regressions (modifications in the treatment of the section edges);
- Fixed test case bugs modalg bug23100;
- Test cases bugs modalg bug21754, bug22990 have been corrected according to the new format of the bsection command.
- Test cases bugs modalg bug13116_*, bug23711 have been fixed;
- Test cases bugs modalg bug697_2, bug697_4, bug697_7, bug697_8 have been marked as invalid according to the issue 0022033;
- Test cases bugs modalg bug22109_2, bug22109_3 have been corrected;
- Test case bugs modalg bug18186 has been corrected as it is improvement;
- Test case bugs modalg bug22802 has been deleted as there is no package BOPTColStd.
