Changed computation of point projection to more correct.
Calculation periodicity information added to cache.
Test case for issue CR26339
Small correction of test case for issue CR26339
Avoid merging edges if the collapsed vertex has a third connected edge.
Fix the problem when merged edges have different location.
Test case for issue CR26219
Additional fix to improve robustness.
Test cases for issue CR26219
Small correction of test cases for issue CR26219
Check the validity of the intersection point between Faces.
Test case for issue CR26316
Correction of the test case for the issue.
Small correction of test case for issue CR26316
Graphic3d_StereoMode - add new enumeration for stereoscopic outputs:
- Graphic3d_StereoMode_QuadBuffer
- Graphic3d_StereoMode_Anaglyph
- Graphic3d_StereoMode_RowInterlaced
- Graphic3d_StereoMode_ColumnInterlaced
- Graphic3d_StereoMode_ChessBoard
- Graphic3d_StereoMode_SideBySide
- Graphic3d_StereoMode_OverUnder
Graphic3d_RenderingParams - add new options controlling stereo output:
- StereoMode
- ToReverseStereo
- AnaglyphFilter
OpenGl_ShaderManager - add predefined GLSL programs for new stereo outputs.
OpenGl_Workspace::Redraw() - do not implicitly disable stereo to allow stereo dump as is.
OpenGl_Caps - add flag swapInterval to control VSync.
OpenGl_Workspace::BufferDump() - handle cases with non-applicable GL_PACK_ROW_LENGTH.
CALL_DEF_WINDOW - drop unused fields; add fields "left" and "top"
to reverse stereo pair for interlaced output depending on window position.
Draw Harness, ViewerTest:
- Extend syntax of command vstereo to setup stereo.
- Extend vdump command to allow dump of stereoscopic pair in different formats.
- Extend command vcaps with option vsync.
- Use mouse scroll to zoom and adjust ZFocus in WinAPI.
- Use "/" and "*" to adjust IOD.
v3d/glsl/stereo - add test case for stereo modes.
Cocoa_LocalPool, OSD_EnvironmentIterator - fix compilation issues on OS X Snow Leopard.
1. Methods IntPolyh_MaillageAffinage::GetMinDeflection() and IntPolyh_MaillageAffinage::GetMaxDeflection() have been created (see cdl-file for more detail information).
2. Extended check, if starting point of WLine is a tangent point, has been implemented in IntWalk_PWalking::Perform(...) method.
Test cases for issue CR26151
Classifier has been corrected to not take into account a probing point if the probing line appears to be tangent to the boundary at this point.
But allow to use tangent point if all points on the edge are tangent.
Modify bad test cases.
Test case for issue CR26206
1. Conditions for adjusting and for breaking Walking-lines have been amended.
2. Processing of case when WLine should be broken has been changed.
Test cases for issues 26193 and 26208 have been added
Cosmetic correction of test-cases
Modification of test-case according to the new behavior.
Replace BOPCol_MapOfShape by BOPCol_IndexedMapOfShape to provide
the same order of shells in the result
Test case for issue CR26253
Correction of test case for issue CR26253
A tool to remove tails from the wires of a shape was created.
The tool is based on mechanism 'ShapeFix',
is located in types 'ShapeFix_Wire' and 'ShapeAnalysis_Wire',
is enabled through method 'ShapeFix_Wire::FixTailMode' and
is initialized by methods 'ShapeFix_Wire::SetMaxTailAngle' and 'ShapeFix_Wire::SetMaxTailWidth' and
is called through method 'ShapeFix_Wire::FixTails'.
The status of any performing of the last method is accessible through method 'ShapeFix_Wire::StatusFixTails'.
The tail angle is checked only at the tail start.
Mechanism 'ShapeFix' was modified:
- the tool is disabled by default;
- algorithm 'Fix notched edges' is disabled then the tool is enabled;
- the tool and the last algorithm work in turns then the tool works on the request.
'Draw' command 'fixshape' was extended by options '-maxtaila' and '-maxtailw' to test the tool.
'Draw' tests to test the tool were created.
Algorithm 'fixshape' was changed in type 'ShapeProcess_OperLibrary' to
- use new parameters named 'FixTailMode', 'MaxTailAngle' (in degrees) and 'MaxTailWidth' from the algorithm context;
- apply the tool after the shape will be fully fixed if the tool was enabled.
Place holders for the new parameters were created in the resource file of mechsnism 'STEPControl_Reader'.
Test cases for issue CR26261
4. Precised calculation of derivatives of surface of revolution is implemented for the points of surface placed on the axis of revolution (Geom_SurfaceOfRevolution.cxx)
5. Small modifications are made to adjust algorithms to new behavior of B-spline calculation.
6. Test cases were modified according to the modern behavior.
7. Changes in BRepLib_CheckCurveOnSurface to use adaptors instead of geometric entities
9. Added methods to access directly poles, knots, multiplicities of BSpline curves and surfaces
The analysis of small area in the method ShapeAnalysis_Wire::CheckSmallArea is performed the following way:
- On the fisrt step algorithm produces a rough estimation of part of surface area.
- In a case if obtained estimation is less than tolerance then evaluate real area and comapre this value with tolerance.
- New flag has been added to XSTEPResource/IGES. In a case if flag is true the faces with small 3d area is removed from ShapeFix context.
Test-case for issue #25923 and update test-cases in de group according to the new behavior.
This patch improves performance of OpenGl_BVHClipPrimitiveSet. In particular, on the attached test case for 90 000 spheres the results are the following:
1) Master: vdisplay - 55 sec, 5 FPS, 1.4 GB memory, vclear - 180 sec.
2) Branch: vdisplay - 1.3 sec, 5 FPS, 1.4 GB memory, vclear - 90 sec.
So, the patch improves vdisplay in ~40 times, and vclear in ~2 times without extra memory and with no impact on rendering performance. However, the vclear time is still significant. According to profile results, it is due to Graphic3d_Structure::DisconnectAll method.
Test case for issue CR26199
Fix invalid warnings in 'vdefaults' command.
Methods V3d_View::FitAll and NIS_View::FitAll3d now take arbitrary bounding box as a parameter;
Option -selected added to vfit command to fit only selected entities in Draw;
F key press now fits selected objects if any by default.
Correct the algorithm to get right Start point for extension of the walking line.
Test case for issue CR26197
Correction of test case bugs/modalg_6/bug26197
Changes:
class BOPTools_AlgoTools2D
- method:
Standard_Integer BOPTools_AlgoTools2D::AttachExistingPCurve
(const TopoDS_Edge& aE2,
const TopoDS_Edge& aE1,
const TopoDS_Face& aF,
const Handle(IntTools_Context)& aCtx)
has been changed.
The treatment of the curves that need to be reversed has been modified
taking into account reversed parameter
Test case for issue CR26224
class BOPAlgo_PaveFiller
1. method
void BOPAlgo_PaveFiller::MakeBlocks()
Update of FaceInfo IN information before filling the maps.
2. methods
void BOPAlgo_PaveFiller::UpdateFaceInfo
(BOPDS_DataMapOfPaveBlockListOfPaveBlock& theDME,
const BOPCol_DataMapOfIntegerInteger& theDMV)
void BOPAlgo_PaveFiller::ProcessExistingPaveBlocks
(const Standard_Integer theInt,
const BOPDS_IndexedMapOfPaveBlock& aMPBOnIn,
const BOPCol_DataMapOfIntegerListOfInteger& aDMBV,
BOPDS_IndexedDataMapOfShapeCoupleOfPaveBlocks& aMSCPB,
BOPCol_DataMapOfShapeInteger& aMVI,
BOPDS_MapOfPaveBlock& aMPB)
Small changes in treatment of existing pave blocks when making new ones from intersection curves.
Test case for issue CR26218
Correction of test case for issue CR26218
Remove classes Select3D_ISensitivePointSet and Select3D_BoundarySensitivePointSet; use Select3D_SensitivePoly directly for boundary selection.
Make last argument in Select3D_SensitiveFace non-default to ensure that value is always explicitly specified by the caller.
Inherit SelectMgr_FrustumBuilder from Standard_Transient to use normal Handle instead of NCollection_Handle.
Add test case bugs/vis/bug26146.
2 modes of rectangular selection are available: inclusion-only and overlap-allowing;
The modes can be switched using method AllowOverlapDetection from StdSelect_ViewerSelector3d;
BVH for sensitive entities now builds if there is more than max number of leafs in collection;
Added option -allowoverlap to command vselect;
Interactive rectangular selection in Draw is now available in 2 modes:
- if the user starts selection from upper corners, only fully included objects will be selected;
- if the user starts selection from lower corners, both partially and fully overlapped objects will be selected.
Max tolerance is now applied to all objects and entities by default;
if there is an entity with a lower tolerance, selecting frustum will be recalculated for it.
The ability to set sensitivity for each entity individually is moved to protected section of SelectBasics_SensitiveEntity
SetPixelTolerance from AIS_InteractiveContext now sets custom tolerance that is applied to all sensitives.
Added -unset option to vselprecision command to disable custom tolerances.
Test case for issue #26159
