1) Extend Poly_Triangulation by mesh purpose, possibility to be cleared and late-load deferred data interfaces.
2) Update BRep_TFace to store list of triangulations istead of single one. And also active one. Update getter and setter of single triangulation and add new methods to interaction with whole triangulations list.
3) Update BRep_Tool to get single triangulation of face according to the input mesh purpose or whole triangulations list.
4) Update BRep_Builder to make face by not only single triangulation but whole triangulations list with specified active one.
5) Add new methods to BRepTools to interact with shape triangulations (Load/Unload/Activate/LoadAll/UnloadAllTriangulation(s))
6) Add new 'tlateload'command for shape to load/unload/activate triangulations.
7) Update 'trinfo' command by '-lods' options to print detailaed information about LODs of this shape
8) Support empty triangulations by selection. Use bounding box selection in this case.
9) Add new 'outdisplist' option to XDispaly command to print list of displayed objects to output variable but not to theDI
10) Add new '-noecho' option to vdisplay command to skip printing of displayed objects to theDI
11) Create new RWMesh_TriangulationSource as mesh data wrapper for delayed triangulation loading.
12) Create new RWMesh_TriangulationReader as base interface for reading primitive array from the buffer.
13) Cache nodes/triangles number defined in glTF file
14) Use RWMesh_TriangulationSource class as base of RWGltf_GltfLatePrimitiveArray one and RWMesh_TriangulationReader class as base of RWGltf_TriangulationReader one
15) Add possibilty to support of LODs by glTF reader. It is possible to skip data loading and load them later
16) Add new '-skiplateloading' (to skip triangulation loading), '-keeplate' (to keep information about deferred storage to load/unload triangulation later),
'-toprintdebuginfo' (to print additional debug information) options to ReadGltf command
17) Add new test of glTF late loading
Information about normals are stored in BinOCAF, XmlOCAF, BRep and BBRep (in case of triangulation-only Faces).
Versions of formats have been changed (11 for TDocStd, 4 for BRep Shape and 3 for Binary BRep Shape)
theWithNormals parameter added to BRepTools::Write()
IsWithNormals()/SetWithNormals() function added to BRepTools_ShapeSet
-normals/-noNormals option added to StoreTriangulation DRAW command
-normals/-noNormals option added to writebrep DRAW command
Tests for writing to brep/binary brep/BinXCaf/XmlXCaf added
Test for StoreTriangulation options -normals/-noNormals added
Added enumerations BinTools_FormatVersion & TopTools_FormatVersion for more clear version tracking in the code.
Added new BinTools::Write() & BRepTools::Write() overloaded functions with version & isWithTriangles parameters.
Added new "readbrep"/"writebrep" DRAW commands handling reading and writing of both Binary and ASCII .brep formats
and providing arguments to setup writing of triangulation data and of format version.
"binrestore" is made an alias to new command "readbrep".
"binsave" now is an alias to new "writebrep" saving into binary format by default ("writebrep" writes into ASCII format by default).
Progress indication mechanism is refactored to support incrementing progress within multithreaded algorithms.
The class Message_ProgressIndicator is only an interface to the user application.
It accumulates the progress provided by progress scopes.
The counter is protected by mutex for thread-safety.
The new class Message_ProgressScope replacing Message_ProgressSentry should be used to advance the progress.
The scopes are nested to each other to reflect the nested nature of operations.
The new class Message_ProgressRange should be used to pass the progress to sub-scopes.
All OCCT algorithms involving progress indication have been updated to new API.
Improvements in Draw_ProgressIndicator:
- Separate console mode has been added in order to make possible to put the progress into std::cout instead
or in addition to the draw interpreter, instead of trigger option "-tclOutput".
- Treatment of Ctrl-Break signal has been added.
Now any operation can be aborted by Ctrl-C or Ctrl-Break keystroke.
Added new test case 'perf fclasses progr_par' for testing of parallel work of the progress.
Add support of Message_ProgressIndicator in BinTools classes.
Add support of Message_ProgressIndicator with possibility of user break in methods of opening and saving TDocStd_Application.
Add tests of ProgressIndicator in TDocStd_Applacation.
BRepMesh: Add new mesh parameter *AllowQualityDecrease* which affects the criteria used for checking of the consistency of the existing mesh to new meshing parameters.
So if set to true it will force the meshing of the shape if current deflection strongly vary from the new one, no matter in which side.
BRepTools::Clean: Keep triangulation on non-geometric shapes (faces with no surface or edges with no curves).
BRepTools::Triangulation() has been extended with a new parameter for checking Poly_Polygon3D presense within free Edges.
StdPrs_WFShape::Add() now performs auto-triangulation in the same way as StdPrs_ShadedShape::Add().
StdSelect_BRepSelectionTool::GetEdgeSensitive() now creates Select3D_SensitiveSegment instead of Select3D_SensitiveCurve for tessellated segment.
Select3D_SensitiveSegment default sensitivity factor has been changed to 3 pixels to match Select3D_SensitiveCurve.
Test case bug23625_1, added workaround for out-of-range crash in HLRBRep_PolyAlgo on re-triangulated shape.
"endl" manipulator for Message_Messenger is renamed to "Message_EndLine".
The following entities from std namespace are now used
with std:: explicitly specified (from Standard_Stream.hxx):
std::istream,std::ostream,std::ofstream,std::ifstream,std::fstream,
std::filebuf,std::streambuf,std::streampos,std::ios,std::cout,std::cerr,
std::cin,std::endl,std::ends,std::flush,std::setw,std::setprecision,
std::hex,std::dec.
1. Rewrite the method BRepTools::DetectClosedness.
2. Correct the method BRepOffset_Tool::EnLargeFace to process properly non-periodic but closed faces.
New algorithms calculating global properties on mesh data have been added:
- BRepGProp_MeshCinert computes the global properties of polylines represented by a set of points;
- BRepGProp_MeshProps computes the global properties of a surface mesh.
Existing tool BRepGProp now automatically uses new algorithm for triangulation-only faces.
By default, algorithm will use exact geometry objects (surfaces), when it is available (as before the patch);
this behavior can be switched by a new flag UseTriangulation, forcing usage of triangulation instead of exact geometry when both defined.
TopoDS_Shape::NbChildren() - new method has been introduced.
TopoDS_Shape.lxx, TopoDS_TShape.lxx - inline methods have been moved to hxx.
TopoDS_TShape_Flags has been redeclared as enumeration instead of preprocessor macros.
Cyclic dependency between headers TopoDS_Shape.hxx and TopoDS_TShape.hxx eliminated.
Places where TopoDS_Iterator is used only for calculation of number of sub-shapes are updated to use NbChildren() instead
The method *BRepTools::UpdateFaceUVPoints* has been modified to resets the UV points of the edge to the bounding points of the parametric curve of the edge on the face.
Test cases for the issue.
Adjust test cases heal split_angle_advanced ZC3, ZE6, ZE9 for current behavior as they show less faulty shapes now.
Adjust test case bugs modalg_6 bug21246 as it works correctly now.
- Add the flag ExtensionMode in the method BRepOffset_Tool::EnLargeFace, defining the mode of extension of the surface of the face. Old behavior is to be remained the default one.
- Fix wrong building of extended face on a closed surface. Now, if the face is closed in U direction (like cylinder) but the seam edge is shifted from 0 position, the resulting extended face has properly connected seam edge.
- Add new public static method BRepTools::DetectClosedness(), which checks whether a face is closed in U and V directions.
OSD_OpenStream() now uses __gnu_cxx::stdio_filebuf extension for opening UNICODE files on MinGW when using C++ file streams.
Variant accepting filebuf returns bool (true if succeeded and false otherwise).
Checks of ofstream to be opened made via calls to low-level ofstream::rdbuf() are replaced by calls to ofstream::is_open(); state of the stream is also checked (to be good).
Unicode name used for test file in test bugs fclasses bug22125 is described (for possibility to check it).
TCollection_ExtendedString/TCollection_AsciiString description
has been updated to reflect usage of this classes for Unicode strings.
TCollection_ExtendedString now defines constructor taking wchar_t* (all platforms)
and method ::ToWideString() returning wchar_t* (Windows only).
TCollection_AsciiString now defines constructor taking wchar_t*.
TCollection_ExtendedString/TCollection_AsciiString now defines
auxiliary methods ::StartsWith() and ::EndsWith().
TCollection_ExtendedString internals has been updated to eliminate
duplicated code for converting between UTF-16 and UTF-8.
Code has been cleaned up from redundant explicit conversions to wchar_t*.
Global method OSD_OpenStream()/OSD_OpenFileBuf() have been replaced
by C++ template to eliminate copy-paste for different STL collections.
OSD_SharedLibrary now uses wide-char system API call LoadLibraryExW()
on Windows for consistency.
New macro Standard_UNUSED has been added for marking possibly unused functions and variables
(to suppress gcc/clang compiler warnings).
Automatic upgrade of OCCT code by command "occt_upgrade . -nocdl":
- WOK-generated header files from inc and sources from drv are moved to src
- CDL files removed
- All packages are converted to nocdlpack
OSD_OpenFile.hxx header is created for using in file open operations with Unicode names.
Fix for STEP files reading.
Adding test cases for issue 25367
Update test case for issue 25364
Update test cases due to improvements
Range of changing of some analytic curves is computed by other methods. It allows computing face's boundaries with more precise.
Tolerance was increased to provide successful work of some algorithms.
Functions BRepOffsetAPI_MiddlePath::Build() and ApproxWithPCurves(...) (file IntTools_FaceFace.cxx) were changed according to new result of algorithm's work.
It is possibly for "outboundaried faces" (see bug#23675) to compute incorrect UV-Bounds, when first parameter is more than last. To avoid it, extended control of computed bounds was added.
Function for fail sameparameter fixing was added to HLRAppli_ReflectLines to avoid creation bad shapes after algorithm's work.
In file ShapeFix_ComposeShell.cxx only text formatting was changed.
Some test cases are changed according to their new behavior.
Added test case bugs/moddata_3/bug23511
Global functions are added to allow a user performing DRAW commands from VS Command Window when DRAW is interrupted on a breakpoint.
Previously existing functions are adapted to work with Visual Studio debugger (Command Window).
A manual describing use of these functions and other debugging facilities and some hints is added to Developer Guides.
Minor corrections and refinement of debug.md.
License statement text corrected; compiler warnings caused by Bison 2.41 disabled for MSVC; a few other compiler warnings on 54-bit Windows eliminated by appropriate type cast
Wrong license statements corrected in several files.
Copyright and license statements added in XSD and GLSL files.
Copyright year updated in some files.
Obsolete documentation files removed from DrawResources.
