Automatic upgrade of OCCT code by command "occt_upgrade . -nocdl":
- WOK-generated header files from inc and sources from drv are moved to src
- CDL files removed
- All packages are converted to nocdlpack
A tool to remove tails from the wires of a shape was created.
The tool is based on mechanism 'ShapeFix',
is located in types 'ShapeFix_Wire' and 'ShapeAnalysis_Wire',
is enabled through method 'ShapeFix_Wire::FixTailMode' and
is initialized by methods 'ShapeFix_Wire::SetMaxTailAngle' and 'ShapeFix_Wire::SetMaxTailWidth' and
is called through method 'ShapeFix_Wire::FixTails'.
The status of any performing of the last method is accessible through method 'ShapeFix_Wire::StatusFixTails'.
The tail angle is checked only at the tail start.
Mechanism 'ShapeFix' was modified:
- the tool is disabled by default;
- algorithm 'Fix notched edges' is disabled then the tool is enabled;
- the tool and the last algorithm work in turns then the tool works on the request.
'Draw' command 'fixshape' was extended by options '-maxtaila' and '-maxtailw' to test the tool.
'Draw' tests to test the tool were created.
Algorithm 'fixshape' was changed in type 'ShapeProcess_OperLibrary' to
- use new parameters named 'FixTailMode', 'MaxTailAngle' (in degrees) and 'MaxTailWidth' from the algorithm context;
- apply the tool after the shape will be fully fixed if the tool was enabled.
Place holders for the new parameters were created in the resource file of mechsnism 'STEPControl_Reader'.
Test cases for issue CR26261
1. B-spline cache was moved into separated classes: BSplCLib_Cache for 2D and 3D curves and BSplSLib_Cache for surfaces.
2. The cache is used now in corresponding adaptor classes (Geom2dAdaptor_Curve, GeomAdaptor_Curve and GeomAdaptor_Surface) when the curve or surface is a B-spline.
3. Algorithms were changed to use adaptors for B-spline calculations instead of curves or surfaces.
4. Precised calculation of derivatives of surface of revolution is implemented for the points of surface placed on the axis of revolution (Geom_SurfaceOfRevolution.cxx)
5. Small modifications are made to adjust algorithms to new behavior of B-spline calculation.
6. Test cases were modified according to the modern behavior.
7. Changes in BOPAlgo_WireSplitter, BOPTools_AlgoTools, BRepLib_CheckCurveOnSurface and ShapeAnalysis_Wire to use adaptors instead of geometric entities
8. Allow Geom2dAdaptor and GeomAdaptor in case of offset curve to use corresponding adaptor for basis curve
Modification of test-cases according to the new behavior.
The analysis of small area in the method ShapeAnalysis_Wire::CheckSmallArea is performed the following way:
- On the fisrt step algorithm produces a rough estimation of part of surface area.
- In a case if obtained estimation is less than tolerance then evaluate real area and comapre this value with tolerance.
- New flag has been added to XSTEPResource/IGES. In a case if flag is true the faces with small 3d area is removed from ShapeFix context.
Test-case for issue #25923 and update test-cases in de group according to the new behavior.
Macros ending on "DEB" are replaced by OCCT_DEBUG across OCCT code; new macros described in documentation.
Macros starting with DEB are changed to start with "OCCT_DEBUG_".
Some code cleaned.
fix the notched edges twice per face - before checking for missing seam and after
Test case correction for issue CR24983
Add check for invalid Surface of linear extrusion (with basis curve - line and extrusion direction parallel to this line) during converting STEP surface
Small corrections of test cases for issue CR24983
Add checks for cone-like surfaces during seam fixing
Delete check for missing degenerated edge for cones in FixMissingSeam() function, because this check is exist in FixPeriodicDegenerated(). Check for uniqueness of wire is unnecessary after this.
Update of test-cases
Range of changing of some analytic curves is computed by other methods. It allows computing face's boundaries with more precise.
Tolerance was increased to provide successful work of some algorithms.
Functions BRepOffsetAPI_MiddlePath::Build() and ApproxWithPCurves(...) (file IntTools_FaceFace.cxx) were changed according to new result of algorithm's work.
It is possibly for "outboundaried faces" (see bug#23675) to compute incorrect UV-Bounds, when first parameter is more than last. To avoid it, extended control of computed bounds was added.
Function for fail sameparameter fixing was added to HLRAppli_ReflectLines to avoid creation bad shapes after algorithm's work.
In file ShapeFix_ComposeShell.cxx only text formatting was changed.
Some test cases are changed according to their new behavior.
Added test case bugs/moddata_3/bug23511
MAIN CHANGES:
FixAddNaturalBound: the boundaries of "natural bound addition" are restricted: a face, that does not contains an outer wire, should not have any infinite UV boundaries due to new face building (with using a surface) requires specified UV boundaries.
FixAddNaturalBound: myResult is updated in FixAddNaturalBound when the method creates a new face with natural boundary. myResult is required to be updated for next "fix small-area wires" algorithm
IsPeriodicConicalLoop: incorrect working BRepTools_WireExplorer was replaced on TopoDS_Iterator.
a natural bound is added to all the faces are constructed with UV-periodical surfaces (not only sphere and torus; e.g., closed b-splines)
other:
ShapeAnalysis: ReverceSeq renamed to ReverseSeq
BRep_Tool Pnt and Tolerance has the check for null TShape
Test cases for issue CR24249
required null checks were added
test cases were corrected according to their new behavior
Correction test case for issue CR24249
License statement text corrected; compiler warnings caused by Bison 2.41 disabled for MSVC; a few other compiler warnings on 54-bit Windows eliminated by appropriate type cast
Wrong license statements corrected in several files.
Copyright and license statements added in XSD and GLSL files.
Copyright year updated in some files.
Obsolete documentation files removed from DrawResources.
Fix that face, in which only wire was reordered during shape healing, was not replaced.
Add test case for this fix
Add status for shifted wires in reordering.
Modified test case de/step_1/E3 according to new reference data
Add check for too small distances during edges reordering
Fix writing TrimmedSurface (Type 144).
Fix checking for too small distances between loops of edges during edge's reordering.
Add checking for too small BSpline segments during reading and writing IGES.
Fix wire splitting by adding checking that vertexes same not only in 3d, but in 2d too.
use tolerance of vertexes recomputed through resolution surface, not 2d curves.
Adding test case for this fix
Modified test case bugs iges bug23746 and cases in group de according to new reference data
The two corrected if-clause conditions were always true.
In FixSmallAreaWire where the documentation says: "Detects wires with small area (that is less than 100*Precision::PConfusion(). Removes these wires if they are internal." and the bugfix conforms to this.
For 'NeedCheckSplitWire' option in the Perform method the same assumption is made although no documentation on this could be found.
