Check, if cylinder axes are parallel is made more carefully.
This check is brought to conformity with check if axes are parallel (see constructor AxeOperator::AxeOperator(...) in IntAna_QuadQuadGeo.cxx file)
Test case for issue CR26884
- Handle cases of 0 and Pi angle depending on lines in edges and end points
Draw arcs in accordance with input normal for minimum angle, check correctness of input circle parameters
Parameter for adaptive computation of minimal 2D meshing precision added in BRepMesh_IncrementalMesh API.
Corresponding option -adaptive added in DRAW command
All meshing parameters are collected in structure, BRepMesh_FastDiscret::Parameters, which is now used to define and manipulate parameters of the algorithm.
* Implement GeomEvaluator package
* Inject evaluators to GeomAdaptor_Surface to calculate values of complex surfaces
* Inject evaluators to Geom_Surface classes to calculate values for offset surfaces, surfaces of revolution and surfaces of extrusion
* Move Adaptor3d_SurfaceOfLinearExtrusion and Adaptor3d_SurfaceOfRevolution to GeomAdaptor and unify calculation of their values and derivatives
* Code optimizations
* Update test cases
Update of test-cases according to the new behavior
- update status in SelectMgr_SelectionManager::RecomputeSelection:
1) is set to full for all selections;
2) is switched to none only if selection was actually recomputed;
- test case for issue #26870
- Correct AIS_LengthDimension::InitEdgeFaceLength() method to support face-edge and edge-face cases
- Correct test command to support face-edge and edge-face input geomerty without custom plane
The commands to debug BOA.
These commands should serve only debug purposes and should not be used in tests.
Removing old implementation of the duplicated bopnews command.
The algorithm is based on the General Fuse algorithm (GFA). The result of
GFA is all split parts of the Arguments.
The purpose of this algorithm is to provide the result with the content of:
1. Cells (parts) defined by the user;
2. Internal boundaries defined by the user.
In other words the algorithm should provide the possibility for the user
to add or remove any part to (from) result and remove any internal boundaries
between parts.
Requirements for the Data:
All the requirements of GFA for the DATA are inherited in this algorithm.
Plus all the arguments should have the same dimension.
Results:
The result of the algorithm is compound containing selected parts of
the basic type (VERTEX, EDGE, FACE or SOLID). The default result
is empty compound. It is possible to add any split part to the result
by using the methods AddToRessult() and AddAllToResult().
It is also possible to remove any part from the result by using methods
RemoveFromResult() and RemoveAllFromResult().
The method RemoveAllFromResult() is also suitable for clearing the result.
To remove Internal boundaries it is necessary to set the same material to the
parts between which the boundaries should be removed and call the method
RemoveInternalBoundaries(). The material should not be equal to 0, as this is
default material value. The boundaries between parts with this value
will not be removed.
One part cannot be added with the different materials.
It is also possible to remove the boundaries during combining the result.
To do this it is necessary to set the material for parts (not equal to 0)
and set the flag bUpdate to TRUE.
BUT for the arguments of the types FACE or EDGE it is recommended
to remove the boundaries in the end when the result is completely built.
It will help to avoid self-intersections in the result.
It is possible to create typed Containers from the parts added to result by using
method MakeContainers(). The type of the containers will depend on the type of
the arguments: WIRES for EEDGE, SHELLS for FACES and COMPSOLIDS for SOLIDS.
The result will be compound containing containers.
Adding of the parts to such result will not update containers. The result
compound will contain the containers and new added parts (of basic type).
Removing of the parts from such result may affect some containers if the
the parts that should be removed is in container. In this case this container
will be rebuilt without that part.
History:
The algorithm supports history information. This information available through
the methods IsDeleted() and Modified(). In DRAW Test Harness it is available
through the same commands as for Boolean Operations (bmodified and bisdeleted).
Examples:
1. API
BOPAlgo_CellsBuilder aCBuilder;
BOPCol_ListOfShape aLS = ...; // arguments
/* parallel or single mode (the default value is FALSE)*/
Standard_Boolean bRunParallel = Standard_False;
/* fuzzy option (default value is 0)*/
Standard_Real aTol = 0.0;
//
aCBuilder.SetArguments(aLS);
aCBuilder.SetRunParallel(bRunParallel);
aCBuilder.SetFuzzyValue(aTol);
//
aCBuilder.Perform();
if (aCBuilder.ErrorStatus()) { // check error status
return;
}
/* empty compound, as nothing has been added yet */
const TopoDS_Shape& aRes = aCBuilder.Shape();
/* all split parts */
const TopoDS_Shape& aRes = aCBuilder.GetAllParts();
//
BOPCol_ListOfShape aLSToTake = ...; // parts of these arguments will be taken into result
BOPCol_ListOfShape aLSToAvoid = ...; // parts of these arguments will not be taken into result
//
/* defines the material common for the cells, i.e.
the boundaries between cells with the same material
will be removed.
By default it is set to 0. Thus, to remove some boundary
the value of this variable should not be equal to 0 */
Standard_Integer iMaterial = ...;
/* defines whether to update the result right now or not */
Standard_Boolean bUpdate = ...;
// adding to result
aCBuilder.AddToResult(aLSToTake, aLSToAvoid, iMaterial, bUpdate);
aR = aCBuilder.Shape(); // the result
// removing of the boundaries
aCBuilder.RemoveInternalBoundaries();
// removing from result
aCBuilder.AddAllToResult();
aCBuilder.RemoveFromResult(aLSToTake, aLSToAvoid);
aR = aCBuilder.Shape(); // the result
2. DRAW Test Harness
psphere s1 15
psphere s2 15
psphere s3 15
ttranslate s1 0 0 10
ttranslate s2 20 0 10
ttranslate s3 10 0 0
bclearobjects; bcleartools
baddobjects s1 s2 s3
bfillds
# rx will contain all split parts
bcbuild rx
# add to result the part that is common for all three spheres
bcadd res s1 1 s2 1 s3 1 -m 1
# add to result the part that is common only for first and third shperes
bcadd res s1 1 s2 0 s3 1 -m 1
# remove internal boundaries
bcremoveint res
Added history support for Generated shapes (created in ShapeUpgrade_UnifySameDomain).
Methods AddToResult and RemoveFromResult have been documented in more details to clarify the procedure of adding and removing parts.
Adding external library to use ShapeUpgrade_UnifySameDomain.
Test-cases for issue #26798
Small corrections
added tests, corrected remarks
corrected remarks
Fix compilation errors.
Update test case (direction can be exist only for Oriented dimension).
fix compilation warning
1. Algorithm of Restriction line processing has been improved in IntTools_FaceFace.cxx file.
2. Algorithm of checking, if Restriction line and Walking line are coincided has been improved in IntPatch_ImpPrmIntersection.cxx file.
3. Algorithm of extending check if starting point of Walking line is a tangent point has been added.
Small correction of some test cases.
Creation of test case for issue #0026699.
Small correction of test case for issue CR26699
Context usage extended in method ShapeFix_Wire::FixSelfIntersection() to avoid modification of original shape by shape healing.
Added check for subshape modification in XSAlgo/XSAlgo_AlgoContainer::MergeTransferInfo().
Test cases are updated to the new behaviour.
Test case for issue CR24658
OpenGl_Texture::Init2DMultisample() - new method to initialize multisampled texture.
Graphic3d_RenderingParams::NbMsaaSamples - add option defining MSAA samples number.
RayTracing will keep using FBO without MSAA, however it is possible to combine
MSAA for rasterization and FSAA for RayTracing.
OpenGl_FrameBuffer constructor has been changed to do not take arguments.
OpenGl_FrameBuffer::Init() method has been extended with mandatory parameters
defining Color and Depth attachment formats
and optional parameter defining number of MSAA parameters.
Draw Harness, add option -msaa to vrenderparams.
Added new functionality for converting the compound to assembly.
Added new drw command XExpand.
Changed DumpShape and DumpAssembly
Added test.
test changed
Walking line method extraction into separate class IntTools_WLineTool.
New purging method of walking line had been added. Now point which are out of bounds are deleted.
Minor corrections.
Test case for issue CR26775
- Use two different FBOs for accumulating frames for left/right eye projection.
- Added equality checks to camera modification methods to avoid camera updates when performing identity operations.
OpenGl_Clipping - do not setup clipping planes using FFP when it is disabled.
OpenGl_ShaderManager - apply 2d texture coordinates transformation in GLSL programs.
OpenGl_Context::SetTextureMatrix() - move texture matrix assignment from OpenGl_Workspace::setTextureParams() to OpenGl_Context.
Add test case demo/samples/dimensionsglsl with FFP turned OFF.
Add test case v3d/glsl/texture_trsf applying texture transformation.
Small correction of test case for issue CR26122
- added ToDrawLabels option to Prs3d_DatumAspect, by default it is set to true
- AIS_Trihedron (uses DsgPrs_DatumPrs) and AIS_Axis: labels are drawn if ToDrawLabels option in the datum aspect is enabled
- trsf matrix scale factor is now taken into account in depth and distance calculation in selection;
- fixed trsf matrix application error in frustum cache in SelectMgr_ViewerSelector;
- fixed multiple errors in vstate output;
- test cases for issue #26719.
Option "-logarithmic" is provided for draw command vcolorscale.
It changes color scale's labels to logarithmic values due to the min and max range and the number of intervals of the color scale.
New test case added. Fixed error when command vcolorscale was called without arguments.
Added possibility to define patterns that must be present in the test log, so that test is considered OK only if all these patterns are found.
New REQUIRED statement is introduced for that, documented in dox/dev_guides/tests/tests.md.
Removed all uses of decho and dlog commands, added REQUIRED where necessary.
Command xdistcs is modified to output to Tcl instead of cout, and extended to report errors and warnings if distances are greater than tolerance (directly, instead of complex post-processing on Tcl level).
DEBUG mode for TODOs was removed (we should have no deviations in Debug mode).
Corrected indentation in DrawResources/TestCommands.tcl
HTML log will now highlight TODO statement causing IMPROVEMENT status, or REQUIRED statement causing FAIL, by corresponding color.
Now 'vcolorscale' command works correctly with the active view. Changed types of some variables from Standard_Real to Standard_Integer. Added options to set the width or the height of color scale explicitly. Test case is added.
- all data maps where shape used as a key have been replaced with indexed data maps. Now index used for iteration through this map instead of shape-key.
- new test have been added. This test allows to test stability of DraftAngle-algo.
- alignment corrections...
Removing warnings
- fixed misprint in changing owner higlight status AIS_InteractiveContext::SetSelected;
- duplicatied code for unhighlighting seleced owners was moved in a separate function;
- test case for issue #26721
Poles bounding box for curve added for bezier and bspline curves.
Method Poles() for Bezier curve added.
Test case for issue CR26560
Function to compute subshape max tolerance has been added.
Fixed bounding box expanding at Face/Face step of boolean operation.
Test cases are updated to the new behavior.
Changed the rules for the types of the arguments for different operations:
1. FUSE: All arguments and tools should have the same dimension;
2. CUT: The MAXIMAL dimension of the ARGUMENTS should be less
or equal to the MINIMAL dimension of the TOOLS;
3. CUT21: The MINIMAL dimension of ARGUMENTS should be grater
or equal to the MAXIMAL dimension of the TOOLS;
4. COMMON: The arguments and tools could have any dimensions.
For the arguments of collection type (WIRE, SHELL, COMPSOLID)
the type will be passed into the result of the operation.
The documentation should be updated according to new behavior.
Documentation has been updated.
Implemented suggestions by MSV and some grammar changes.
Test cases for issue CR26565
Correction of test cases for issue CR26565
Correction of test cases for issue CR26565
