1. Methods IntPolyh_MaillageAffinage::GetMinDeflection() and IntPolyh_MaillageAffinage::GetMaxDeflection() have been created (see cdl-file for more detail information).
2. Extended check, if starting point of WLine is a tangent point, has been implemented in IntWalk_PWalking::Perform(...) method.
Test cases for issue CR26151
OpenGl_Workspace::updateMaterial() - do not activate writing into Depth buffer without Graphic3d_ZLayerDepthWrite flag.
Add method OpenGl_Workspace::UseDepthWrite() to track glDepthMask() state.
Drop the following outdated API methods conflicting with Z-layers API:
- V3d_View::EnableDepthTest(), V3d_View::IsDepthTestEnabled()
- Visual3d_View::ZBufferIsActivated(), Visual3d_View::SetZBufferActivity(), Visual3d_View::EnableDepthTest(), Visual3d_View::IsDepthTestEnabled()
- Graphic3d_GraphicDriver::SetDepthTestEnabled(), Graphic3d_GraphicDriver::IsDepthTestEnabled()
Activate Z-buffer by default, and manage it state only by Z-layer flags.
Classifier has been corrected to not take into account a probing point if the probing line appears to be tangent to the boundary at this point.
But allow to use tangent point if all points on the edge are tangent.
Modify bad test cases.
Test case for issue CR26206
In method Approx_SameParameter::Build() for case when 2D and 3D curves is not same parameter calculation of maximal deviation is modified by following way :
Projection is considered as done only if parameter projected point falls within the current interval of parameters.
In the Approx_SameParameter considering tolerance after static method ProjectPointOnCurve was added.
In BRepAlgoAPI_Sewing catch of exception was added and computation of tolerance of edge if same parameter was changed in according to check in BRepCheck_Analyzer
In method Approx_SameParameter::Build() for case when 2D and 3D curves is not same parameter calculation of maximal deviation is modified by following way :
Modification in order to avoid warning
Test case for issue CR24357
1. Conditions for adjusting and for breaking Walking-lines have been amended.
2. Processing of case when WLine should be broken has been changed.
Test cases for issues 26193 and 26208 have been added
Cosmetic correction of test-cases
Modification of test-case according to the new behavior.
Replace BOPCol_MapOfShape by BOPCol_IndexedMapOfShape to provide
the same order of shells in the result
Test case for issue CR26253
Correction of test case for issue CR26253
A tool to remove tails from the wires of a shape was created.
The tool is based on mechanism 'ShapeFix',
is located in types 'ShapeFix_Wire' and 'ShapeAnalysis_Wire',
is enabled through method 'ShapeFix_Wire::FixTailMode' and
is initialized by methods 'ShapeFix_Wire::SetMaxTailAngle' and 'ShapeFix_Wire::SetMaxTailWidth' and
is called through method 'ShapeFix_Wire::FixTails'.
The status of any performing of the last method is accessible through method 'ShapeFix_Wire::StatusFixTails'.
The tail angle is checked only at the tail start.
Mechanism 'ShapeFix' was modified:
- the tool is disabled by default;
- algorithm 'Fix notched edges' is disabled then the tool is enabled;
- the tool and the last algorithm work in turns then the tool works on the request.
'Draw' command 'fixshape' was extended by options '-maxtaila' and '-maxtailw' to test the tool.
'Draw' tests to test the tool were created.
Algorithm 'fixshape' was changed in type 'ShapeProcess_OperLibrary' to
- use new parameters named 'FixTailMode', 'MaxTailAngle' (in degrees) and 'MaxTailWidth' from the algorithm context;
- apply the tool after the shape will be fully fixed if the tool was enabled.
Place holders for the new parameters were created in the resource file of mechsnism 'STEPControl_Reader'.
Test cases for issue CR26261
1. B-spline cache was moved into separated classes: BSplCLib_Cache for 2D and 3D curves and BSplSLib_Cache for surfaces.
2. The cache is used now in corresponding adaptor classes (Geom2dAdaptor_Curve, GeomAdaptor_Curve and GeomAdaptor_Surface) when the curve or surface is a B-spline.
3. Algorithms were changed to use adaptors for B-spline calculations instead of curves or surfaces.
4. Precised calculation of derivatives of surface of revolution is implemented for the points of surface placed on the axis of revolution (Geom_SurfaceOfRevolution.cxx)
5. Small modifications are made to adjust algorithms to new behavior of B-spline calculation.
6. Test cases were modified according to the modern behavior.
7. Changes in BOPAlgo_WireSplitter, BOPTools_AlgoTools, BRepLib_CheckCurveOnSurface and ShapeAnalysis_Wire to use adaptors instead of geometric entities
8. Allow Geom2dAdaptor and GeomAdaptor in case of offset curve to use corresponding adaptor for basis curve
Modification of test-cases according to the new behavior.
All uses of "MDTV-Standard" and "MDTV-Design" in tests changed to "BinOcaf", and "MDTV-XCAF" changed to "BinXCAF".
Formats changed: .std to .cbf, .dxc to .dbf.
Test groups renamed accordingly:
xcaf: brep_to_dxc -> brep_to_xbf, igs_to_dxc -> igs_to_xbf, stp_to_dxc -> stp_to_xbf, dxc -> xbf/A1, dxc_add_CL -> xbf_add_CL
xml: ocaf_std -> ocaf_cbf, xcaf_dxc -> xcaf_xbf
Brute force removal of standard persistence (ShapeSchema, StdLSchema, StdSchema, XCAFSchema) and all persistence-specific toolkits.
OCAF formats "MDTV-Standard", "MDTV-XCAF" are removed from resource files.
Uses of "MDTV-Standard" are changed to "BinOcaf", and "MDTV-XCAF" changed to "BinXCAF".
The analysis of small area in the method ShapeAnalysis_Wire::CheckSmallArea is performed the following way:
- On the fisrt step algorithm produces a rough estimation of part of surface area.
- In a case if obtained estimation is less than tolerance then evaluate real area and comapre this value with tolerance.
- New flag has been added to XSTEPResource/IGES. In a case if flag is true the faces with small 3d area is removed from ShapeFix context.
Test-case for issue #25923 and update test-cases in de group according to the new behavior.
This patch improves performance of OpenGl_BVHClipPrimitiveSet. In particular, on the attached test case for 90 000 spheres the results are the following:
1) Master: vdisplay - 55 sec, 5 FPS, 1.4 GB memory, vclear - 180 sec.
2) Branch: vdisplay - 1.3 sec, 5 FPS, 1.4 GB memory, vclear - 90 sec.
So, the patch improves vdisplay in ~40 times, and vclear in ~2 times without extra memory and with no impact on rendering performance. However, the vclear time is still significant. According to profile results, it is due to Graphic3d_Structure::DisconnectAll method.
Test case for issue CR26199
Fix invalid warnings in 'vdefaults' command.
Methods V3d_View::FitAll and NIS_View::FitAll3d now take arbitrary bounding box as a parameter;
Option -selected added to vfit command to fit only selected entities in Draw;
F key press now fits selected objects if any by default.
Correct the algorithm to get right Start point for extension of the walking line.
Test case for issue CR26197
Correction of test case bugs/modalg_6/bug26197
Changes:
class BOPTools_AlgoTools2D
- method:
Standard_Integer BOPTools_AlgoTools2D::AttachExistingPCurve
(const TopoDS_Edge& aE2,
const TopoDS_Edge& aE1,
const TopoDS_Face& aF,
const Handle(IntTools_Context)& aCtx)
has been changed.
The treatment of the curves that need to be reversed has been modified
taking into account reversed parameter
Test case for issue CR26224
class BOPAlgo_PaveFiller
1. method
void BOPAlgo_PaveFiller::MakeBlocks()
Update of FaceInfo IN information before filling the maps.
2. methods
void BOPAlgo_PaveFiller::UpdateFaceInfo
(BOPDS_DataMapOfPaveBlockListOfPaveBlock& theDME,
const BOPCol_DataMapOfIntegerInteger& theDMV)
void BOPAlgo_PaveFiller::ProcessExistingPaveBlocks
(const Standard_Integer theInt,
const BOPDS_IndexedMapOfPaveBlock& aMPBOnIn,
const BOPCol_DataMapOfIntegerListOfInteger& aDMBV,
BOPDS_IndexedDataMapOfShapeCoupleOfPaveBlocks& aMSCPB,
BOPCol_DataMapOfShapeInteger& aMVI,
BOPDS_MapOfPaveBlock& aMPB)
Small changes in treatment of existing pave blocks when making new ones from intersection curves.
Test case for issue CR26218
Correction of test case for issue CR26218
Remove classes Select3D_ISensitivePointSet and Select3D_BoundarySensitivePointSet; use Select3D_SensitivePoly directly for boundary selection.
Make last argument in Select3D_SensitiveFace non-default to ensure that value is always explicitly specified by the caller.
Inherit SelectMgr_FrustumBuilder from Standard_Transient to use normal Handle instead of NCollection_Handle.
Add test case bugs/vis/bug26146.
2 modes of rectangular selection are available: inclusion-only and overlap-allowing;
The modes can be switched using method AllowOverlapDetection from StdSelect_ViewerSelector3d;
BVH for sensitive entities now builds if there is more than max number of leafs in collection;
Added option -allowoverlap to command vselect;
Interactive rectangular selection in Draw is now available in 2 modes:
- if the user starts selection from upper corners, only fully included objects will be selected;
- if the user starts selection from lower corners, both partially and fully overlapped objects will be selected.
Max tolerance is now applied to all objects and entities by default;
if there is an entity with a lower tolerance, selecting frustum will be recalculated for it.
The ability to set sensitivity for each entity individually is moved to protected section of SelectBasics_SensitiveEntity
SetPixelTolerance from AIS_InteractiveContext now sets custom tolerance that is applied to all sensitives.
Added -unset option to vselprecision command to disable custom tolerances.
Test case for issue #26159
1. Function IntImp_Int2S::ChangePoint() has been added (see cdl for detail information).
2. Attempt to forbidden break WLine if it goes along surface boundary.
Code optimization.
2nd optimization
Test case for issue CR25890
1. Develop special sewing algorithm.
2. DRAW-command "fastsewing" has been created (see help for detail information).
3. BRepLib::EnsureNormalConsistency() method has been added (see help for detail information).
4. DRAW-command correctnormals has been created (see help for detail information).
Test cases for this issue.
Correction of elapsed time in test-cases
