DCAF require VISUALIZATION for correct work.
In some scenario DRAWEXE can generate a dublicates of the
internal static singletons. This means each dynamic library
will have their own instance of the static singleton.
Update all direct library loading to use the DCAF plugin
mechanism. This will ensure that the DCAF plugin is loaded
only once and that the correct instance is used.
Originally issue is reproduced only Linux with dlopen with "RTLD_LAZY".
Can be resolved additionally adding "RTLD_LAZY | RTLD_GLOBAL" for dlopen
Modification of checking points for the state "ON" in BRepClass_Intersector.cxx;
Added the test for this ticket;
test case lowalgos/classifier/bug377: BAD -> OK
Extrema/Extrema_GenExtCC.gxx - estimation of Lipchitz constant is improved
Extrema_GlobOptFuncCC.cxx - function value is changed
LocOpe/LocOpe_WiresOnShape.cxx - small correction to fix regression
lowalgos/extcc/bug32882 - new test case is added
some test were updated according new behavior of extrema algo
Fixed GeomAdaptor_Curve::LocalContinuity() for periodic curves.
Fixed GeomAdaptor_Curve::NbIntervals() for periodic curves.
Fixed GeomAdaptor_Curve::Intervals() for periodic curves.
Improved definition of length in tests.
Update Geom2dAdaptor_Curve to the same behavior.
GeomInt/GeomInt_IntSS.cxx, IntTools/IntTools_FaceFace.cxx - setting deflection 0.01
for case of two bspline surfaces
IntPolyh/IntPolyh_Intersection.cxx, IntPolyh/IntPolyh_Intersection.hxx - status IsParallel is added
BndLib/BndLib_Add3dCurve.cxx, IntTools/IntTools_TopolTool.cxx - fix small bugs
Correction of test scripts according to current behavior of algorithms
lowalgos/intss/bug32849 - test case added
IntPatch_ALineToWLine.cxx - setting minimal number of points in a WLine depending on step size
IntPatch_WLineTool.cxx - fix WLines connecting check condition
test cases has been changed according to new behavior
The following classes have been removed as obsolete:
- BRepAlgo_BooleanOperation
- BRepAlgo_Fuse
- BRepAlgo_Cut
- BRepAlgo_Common
- BRepAlgo_Section
The corresponding classes from BRepAlgoAPI package have to be used instead.
Draw commands:
- fuse
- cut
- common
- section/psection
have also been removed as obsolete.
The corresponding commands for modern Boolean operations algorithm (bfuse/bcut/bcommon/bsection) have to be used instead.
Adjustment of the test cases to use the commands for modern algorithm.
Implementation of raising exception while using scale and mirror transformation in shape location
TopLoc/TopLoc_Location.hxx
TopoDS/TopoDS_Shape.hxx
Implementation of new tools for removing forbidden locations from shapes:
BRepTools/BRepTools_PurgeLocations.cxx
BRepTools/BRepTools_PurgeLocations.hxx
BRepTools/BRepTools.cxx
BRepTools/BRepTools.hxx
Draw commands for transforming shapes are corrected, new draw commands: purgeloc, checkloc added
BRepTest/BRepTest_BasicCommands.cxx
Fixing unstable test bug xde bug24759
StepToGeom/StepToGeom.cxx
All other C++ commits are modification of algorithms used mainly in import/export operations in order to allows these operations if shape locations contains scale and mirror transformations.
New test for command purgeloc added
tests/bugs/moddata_3/bug27457
tests/bugs/moddata_3/bug27457_1
tests/bugs/moddata_3/bug27457_2
Some test corrected according to modifications.
Added the implementation of bndbox<->line and bndbox<->segment intersections for 2D to Bnd_Box2d
Added the speedup for 2d classification to BRepClass_Intersector.cxx
Added the test for our improvement
Added map of edges to BrepClass_Edge
Added searching of vertices with high tolerance to BrepClass_Intersector.cxx
Added check for hitting a vertex with high tolerance
Added the creation of a segment for the correct work of the classifier
1) Extend Poly_Triangulation by mesh purpose, possibility to be cleared and late-load deferred data interfaces.
2) Update BRep_TFace to store list of triangulations istead of single one. And also active one. Update getter and setter of single triangulation and add new methods to interaction with whole triangulations list.
3) Update BRep_Tool to get single triangulation of face according to the input mesh purpose or whole triangulations list.
4) Update BRep_Builder to make face by not only single triangulation but whole triangulations list with specified active one.
5) Add new methods to BRepTools to interact with shape triangulations (Load/Unload/Activate/LoadAll/UnloadAllTriangulation(s))
6) Add new 'tlateload'command for shape to load/unload/activate triangulations.
7) Update 'trinfo' command by '-lods' options to print detailaed information about LODs of this shape
8) Support empty triangulations by selection. Use bounding box selection in this case.
9) Add new 'outdisplist' option to XDispaly command to print list of displayed objects to output variable but not to theDI
10) Add new '-noecho' option to vdisplay command to skip printing of displayed objects to theDI
11) Create new RWMesh_TriangulationSource as mesh data wrapper for delayed triangulation loading.
12) Create new RWMesh_TriangulationReader as base interface for reading primitive array from the buffer.
13) Cache nodes/triangles number defined in glTF file
14) Use RWMesh_TriangulationSource class as base of RWGltf_GltfLatePrimitiveArray one and RWMesh_TriangulationReader class as base of RWGltf_TriangulationReader one
15) Add possibilty to support of LODs by glTF reader. It is possible to skip data loading and load them later
16) Add new '-skiplateloading' (to skip triangulation loading), '-keeplate' (to keep information about deferred storage to load/unload triangulation later),
'-toprintdebuginfo' (to print additional debug information) options to ReadGltf command
17) Add new test of glTF late loading
Multiple changes in BRepOffset_MakeOffset algorithm:
- correct fusing vertices;
- correct building intersection edges;
- correct intersecting new edges in 2D;
- correct building wire on a new face;
- correct building history.
Approx/Approx_SameParameter.cxx,hxx:
Class Approx_SameParameter refactoring. Logic is changed in many places to unify usage, simplify maintenance.
Method Curve2d() is changed to return Geom2d_Curve instead of Geom2d_BSplineCurve. Corresponding message is added to the upgrade guide.
.lxx file is merged into .hxx.
Tangent computation is extracted into special method.
Comparing number of sample points after CheckSameParameter(...) is added to define cases with projection fails.
Undesirable behavior when curves are not same parameterized is fixed.
Geom2dAdaptor/Geom2dAdaptor.cxx: treatment of offset curve is added
Adaptor3d/Adaptor3d_TopolTool.cxx: minor improvement of performance for BSpline surfaces with huge number of knots
Tests were modified according to new behavior of sameparameter algorithm
OpenGL rendering is now done into sRGB framebuffer.
OpenGl_ShaderManager::prepareStdProgramFboBlit() has been extended
by programs resolving MSAA texture and applying gamma correction as fallbacks.
Quantity_Color definition has been modified to store RGB components
in linear color space within Quantity_TOC_RGB type.
Standard colors defined by Quantity_NameOfColor enumeration has been updated accordingly.
New Quantity_TOC_sRGB type has been introduced to handle RGB components in non-linear sRGB color space.
OpenGl_TextureFormat class definition has been moved to dedicated files.
New method OpenGl_TextureFormat::FindFormat() replaces OpenGl_Texture::GetDataFormat().
New method OpenGl_TextureFormat::FindSizedFormat() replaces OpenGl_FrameBuffer::getColorDataFormat()
and OpenGl_FrameBuffer::getDepthDataFormat().
Graphic3d_TextureRoot::IsColorMap() - introduced new property defining
if RGB(A)8 image formats should be loaded as sRGB(A) textures or as data RGB(A) textures.
OpenGl_Texture initialization methods have been extended with new theIsColorMap argument.
vreadpixel - added argument -sRGB printing color in sRGB color space.
Test cases have been updated to new sRGB rendered results.
1. Correct building history: the case of closed spine.
2. Rollback method GeomFill_CorrectedFrenet::InitInterval - correct processing singularities on spine.
3. Correct test cases.
New folder "hlr" with subfolders "exact_hlr" and "poly_hlr" has been created.
Draw command "vcomputehlr" has been corrected.
QA command "OCC27341" has been deleted as "vcomputehlr" does its job.
1. Add method TransformPCurves to ShapeUpgrade_UnifySameDomain - to rotate and translate existing pcurves instead of projecting.
2. Modify method ShapeUpgrade_UnifySameDomain::IntUnifyFaces - now it does not apply ShapeFix to new wires and new faces.
3. In the method UnifyEdges: add merging degenerated edges.
Modification in static method BoundedArc of IntStart_SearchOnBoundaries:
add exact intersection of canonical curve-surface (when Func is IntPatch_ArcFunction).
The capabilities of the class BRepOffsetAPI_MakeEvolved have been extended with involving alternate algorithm of resolving the loops in the piped shape. The new option theIsVolume is added for that in the constructor.
New class BRepFill_AdvancedEvolved has been created in order to provide new OCCT-algorithm combining BRepFill_PipeShell and BOPAlgo_MakerVolume.
A change in BOPAlgo_PaveFiller.cxx has been made in order to solve a specific problem of Boolean operation.
The interface of DRAW-command "evolved" has been updated to add the new option. DRAW-command "evolvedsolid" has been deleted. Now it is replaced with DRAW-command "evolved" with the option "-solid".
Testgrid "evolved" has been created.
draw_test_harness.md - description of new options in Draw commands
AppDef_BSplineCompute.hxx, BRepApprox_TheComputeLineOfApprox.hxx, GeomInt_TheComputeLineOfWLApprox.hxx, Approx_BSplComputeLine.gxx - implementation of method SetPeriodic(...) and implementation periodic boundary conditions for multiline in order to get periodic multicurve.
GeomAPI_PointsToBSplineSurface.hxx, GeomAPI_PointsToBSplineSurface.cxx - adding new parameter for methods Init(...) and Interpolate(...), implementation of building periodic tangents for first and last AppDef_MultiPointConstraint of multiline for U direction of surface.
GeometryTest_APICommands.cxx - implementation of new functionality in Draw command surfapp and surfint
GeomFill_NSections.cxx
Fixing problem with bugs modalg_3 bug606_2
Two new functionalities have been added in BRepFilletAPI_MakeChamfer:
- constant throat (the section of chamfer is isosceles triangle, its height is constant in all sections - this is the "throat" of the weld);
- constant throat with penetration(the section of chamfer is right-angled triangle, the first of two surfaces (where is the top of the chamfer) is virtually moved inside the solid by offset operation, the apex of the section is on the intersection curve between moved surface and second surface, right angle is at the top of the chamfer, the length of the leg from apex to top is constant - this is the "throat" of the weld).
- New abstract classes BlendFunc_GenChamfer and BlendFunc_GenChamfInv have been added;
- Class BlendFunc_Chamfer is now descended from BlendFunc_GenChamfer, class BlendFunc_ChamfInv is now descended from BlendFunc_GenChamfInv.
- New class BlendFunc_ConstThroat is descended from BlendFunc_GenChamfer, new class BlendFund_ConstThroatInv is descended from BlendFunc_GenChamfInv.
- New class BlendFunc_ConstThroatWithPenetration is descended from BlendFunc_GenChamfer, new class BlendFund_ConstThroatWithPenetrationInv is descended from BlendFunc_GenChamfInv.
- Class ChFi3d_ChBuilder has now mode of chamfer that can be ClassicChamfer, ConstThroatChamfer and ConstThroatWithPenetrationChamfer.
- Two new DRAW Test Harness commands "chamf_throat" ant "chamf_throat_with_penetration" have been added for the second mode of ChBuilder.
- The interface of DRAW Test Harness command "chamf" changed for symmetric case.
The reason of this problem is in wrong work of classifier algorithm (see the message ~0080992 to the issue #30354). Therefore, the algorithm of IntTools_FClass2d class has been improved. Namely, now orientation of the polygon is computed from area-criterion instead of angle. As result, some simplification of the method IntTools_FClass2d::Init(...) has been made.
<!break>
1. New constructor has been added to the class CSLib_Class2d. It allows applying TColgp_SequenceOfPnt2d.
2. DRAW-commands "addpolygonnode" and "polygonprops" have been created. They are covered by the test case "tests/geometry/2dpolygon/A1".
3. New method Poly::PolygonProperties(...) has been created. See help for detailed information.
4. New testgrid "lowalgos classifier" has been created.
1. New testgrid "lowalgos/intss" has been created. It will contain all test cases on geometrical intersection of two surfaces ("intersect" DRAW-command) and two faces ("bopcurves" DRAW-command).
2. New test case for the issue #28493 has been created because the problem is not reproduced on MASTER.
3. Test case (lowalgos/intss/bug24472) for the issue #29501 has been modified in order to check loops of the resulting intersection curves.
1. The condition of WLine breaking (in IntWalk_IWalking algorithm) has become more independent of the input tolerance.
2. Currently the algorithm of IntPatch_Points of WLine processing depends on the algorithm of obtaining the WLine.
3. The methods IntSurf_LineOn2S::Add(...) and IntSurf_LineOn2S::SetUV(...) have become not inline (see the message ~0077431 in the issue #29866).
Bnd_OBB constructor from Bnd_Box is fixed for VOID input.
DRAW command bounding command is adjusted:
- Support of old syntax 'bounding shape'is restored.
- Exception on VOID bounding box is avoided.
- Arguments are handled in case-insensitive way.
- Options -s, -perfmeter, and ability to set result as first argument are removed as redundant.
- Help is moved to command definition.
Separate command OCC29311 is added (in QADraw) to do the same as option -perfmeter did; tests are updated.
The following improvements have been introduced in Boolean Operations algorithm s:
1. UBTree is replaced with EBTree in Boolean operations to be able to add/remove elements into the tree of bounding boxes.
2. Repeated (nested) intersection of sub-shapes is performed with argument vertices whose tolerances increased during the operation.
3. The algorithms of Edge/Edge and Edge/Face intersection have been improved for the cases when the intersection point is located close to the edge boundaries .
4. New procedure has been implemented to ensure forced creation of Edge/Face common blocks in cases when the edge is really close to the face.
5. Post-processing of Face/Face intersection results has been improved.
6. Extension of the planar faces for Plane/Plane intersection is avoided.
7. Builder Face now better classifies potentially internal edges relatively to new faces with filtering by bounding boxes.
Side effect changes:
1. IntTools_ShrunkRange now keeps the length of the valid range of the edge.
2. The method BOPDS_DS::UpdateEdgeTolerance() has been removed as unused (replaced by the BOPAlgo_PaveFiller::UpdateEdgeTolerance()).
Test case for the issue 0029900.
Test case for the issue 0029711.
Adjustments of the existing test cases.
Avoid using uninitialized variables.
The algorithm has been improved for the cases when the intersection line goes through the cone apex.
<!break>
1. All special points are put to the ALine forcefully (if they are true intersection point). Currently this step has not been implemented yet.
2. Now the tolerance of IntPatch_Point (put into ALine) is computed in order to cover the distance between it and the correspond ALine.
3. Test cases have been created.
4. Procedure of trimming IntAna_Curve has been improved.
5. Criterion when the discriminant of IntAna_Curve can be considered to be equal to 0 has been improved.
6. Methods IntAna_Curve::FindParameter(...) (and IntPatch_ALine::FindParameter(...)) currently returns list of all parameters corresponding the given point (IntAna_Curve can be self-interfered curve). Before the fix, this method always returned only one (randomly chosen) parameter.
7. Interfaces of the following methods have been changed: IntAna_Curve::FindParameter(...), IntPatch_ALine::FindParameter(...), IntPatch_ALine::ChangeVertex(...), IntPatch_SpecialPoints::AddPointOnUorVIso(...), IntPatch_SpecialPoints::AddSingularPole(...), IntPatch_WLineTool::ExtendTwoWLines().
8. Following methods have been added: IntAna_Quadric::SpecialPoints(...), IntPatch_ALineToWLine::GetSectionRadius(...), IntPatch_SpecialPoints::ProcessSphere(...), IntPatch_SpecialPoints::ProcessCone(...), IntPatch_SpecialPoints::GetTangentToIntLineForCone(...).
------------------
1) tests/boolean/volumemaker/C5
tests/boolean/volumemaker/C6
tests/boolean/volumemaker/E7
They are real IMPROVEMENTS. In the FIX (in compare with MASTER), section result between pairs of faces f2&f6 (C5), f3&f7 (C6) and f1&f5 (E7) is closed. Separated test cases have been created in order to focus on the problem with section. Bug #28503 has been fixed.
Correction in test cases.
Modified method: Approx_ComputeLine::Compute
Check of multicurve is now always unconditional, the procedure of check is modified to avoid infinite loops.
Modified classes: GeomLib_CheckBSplineCurve and GeomLib_Check2dBSplineCurve
Correction of poles at the ends of curve is modified to fit the direction of tangent defined by two first points or two last points of walking line.
Also modified:
BOPAlgo_PaveFiller: modified methods PostTreatFF, RemoveUsedVertices - now unused vertices are included in the list of vertices to be absorbed by other ones.
Implementation of the method for simplification of the result of Boolean Operation on the API level.
The method BRepAlgoAPI_BuilderAlgo::SimplifyResult has been added, so the derived classes such as BooleanOpeation and Splitter can also use this method.
The result shape simplification should be called after the operation is done. The simplification is performed by the means of ShapeUpgrade_UnifySameDomain algorithm.
Draw command "bsimplify" has been added to control the simplification options.
Documentation for new functionality and draw commands controlling the options of Boolean operations.
Test cases for the new functionality.
Side-effect change:
The algorithms in Boolean component have been changed to use the BRepTools_History as a History tool.
Now it became possible to disable the collection of shapes modifications during Boolean Operations, which may be useful for performance sake (in draw the option is controlled by *setfillhistory* command).
Draw command "unifysamedom" has been changed to accept the angular tolerance in degrees instead of radians.
Problem is fixed by the fix for the issue #0028599 (porting of the BRepProj_Projection to modern Boolean Operations algorithm)
Thus, only test case is integrated here.
The method *BRepTools::UpdateFaceUVPoints* has been modified to resets the UV points of the edge to the bounding points of the parametric curve of the edge on the face.
Test cases for the issue.
Adjust test cases heal split_angle_advanced ZC3, ZE6, ZE9 for current behavior as they show less faulty shapes now.
Adjust test case bugs modalg_6 bug21246 as it works correctly now.
Implementation of the mechanism for unification of the history commands for all OCCT algorithms.
The following Draw commands should be used to track the history of shapes modifications of any operation:
- modified - to find the shapes modified from the given shape in the given history.
- generated - to find the shapes generated from the given shape in the given history.
- isdeleted - to check if the given shape has been deleted during operation.
The mechanism allows fast & easy enabling of the DRAW history support for the algorithms supporting the history on the API level (i.e. the algorithm should have the methods Modified(), Generated() and IsDeleted()).
To enable the draw history support it is necessary to store the history of the algorithm into the session. For instance:
TopTools_ListOfShape Objects = ...; // Objects
TopTools_ListOfShape Tools = ...; // Tools
BRepAlgoAPI_Cut aCut(Objects, Tools); // Boolean cut operation
BRepTest_Objects::SetHistory(Objects, aCut); // Store the history for the Objects (overwrites the history in the session)
BRepTest_Objects::AddHistory(Tools, aCut); // Add the history for the Tools
To get the stored history in draw the command "savehistory" should be used. It saves the history kept in session into a Drawable object with the given name:
# perform cut
bcut r s1 s2
# save history of cut
savehistory cut_history
explode s1 f
modified m cut_history s1_1
The Draw History commands of the following algorithms have been removed:
- Boolean Operations;
- Defeaturing;
- Unify same domain;
- Sweep;
- Thrusections;
All these algorithms have been switched to support the new Draw history mechanism.
The Fillet and Blend algorithms have been also enabled to support history commands.
Boolean operations - Allow repeated intersection of edges to find the coinciding pairs.
Previously, only the edges rejected by bounding boxes classification has been additionally checked on coincidence. The current patch removes this filter allowing all edges with coinciding vertices to be checked on coincidence.
Adjustment of the test cases for current behavior:
1. The following cases are improvements:
boolean volumemaker A8
bugs modalg_1 buc60703_1
bugs modalg_1 buc60703_2
bugs modalg_1 buc60703_4
bugs modalg_6 bug26789_1
bugs modalg_6 bug26789_2
bugs modalg_7 bug26883_4
bugs modalg_7 bug27948
2. bugs modalg_7 bug29580_1 is modified to extend the validity checks.
1. Method BRepOffset_Tool::Inter3D is modified: now selection of proper edges is performed here, they are not concatenated into one edge if they go through a vertex on a boundary.
2. Method BRepOffset_Inter3d::ConnexIntByInt is modified: selection of edges is eliminated.
3. Method BRepOffset_Inter2d::ConnexIntByInt is corrected to be able to process seam edges correct.
Test parse rules are improved to recognize messages with word 'fail' or 'failure' as errors.
Test cases are corrected accordingly (TODO or REQUIRED statements added where fail messages were not noticed previously).
