Parameter for adaptive computation of minimal 2D meshing precision added in BRepMesh_IncrementalMesh API.
Corresponding option -adaptive added in DRAW command
All meshing parameters are collected in structure, BRepMesh_FastDiscret::Parameters, which is now used to define and manipulate parameters of the algorithm.
Added possibility to define patterns that must be present in the test log, so that test is considered OK only if all these patterns are found.
New REQUIRED statement is introduced for that, documented in dox/dev_guides/tests/tests.md.
Removed all uses of decho and dlog commands, added REQUIRED where necessary.
Command xdistcs is modified to output to Tcl instead of cout, and extended to report errors and warnings if distances are greater than tolerance (directly, instead of complex post-processing on Tcl level).
DEBUG mode for TODOs was removed (we should have no deviations in Debug mode).
Corrected indentation in DrawResources/TestCommands.tcl
HTML log will now highlight TODO statement causing IMPROVEMENT status, or REQUIRED statement causing FAIL, by corresponding color.
Correction of new vertices insertion: remove all triangles shot by point even if they contain frontier edges in order to prevent cases of free edge glued with frontier;
findNextPolygonLink: choose link with opposite direction to previous one as the last resort in case if the is no another option;
Enlarge bounding boxes by Precision::PConfusion() in order to not to miss possible intersections;
Test-case for issue #26407
Return NoIntersection in case of end point touch and isConsiderEndPointTouch flag is not set
Update of test-cases according to the new behavior
Class CellFilterNDim added.
Class CellFulterNDim used in GlobOptMin to improve performance in case of many solutions.
Memory leak eliminated.
Test cases for issue CR26184
Small correction of test cases for issue CR26184
In method Approx_SameParameter::Build() for case when 2D and 3D curves is not same parameter calculation of maximal deviation is modified by following way :
Projection is considered as done only if parameter projected point falls within the current interval of parameters.
In the Approx_SameParameter considering tolerance after static method ProjectPointOnCurve was added.
In BRepAlgoAPI_Sewing catch of exception was added and computation of tolerance of edge if same parameter was changed in according to check in BRepCheck_Analyzer
In method Approx_SameParameter::Build() for case when 2D and 3D curves is not same parameter calculation of maximal deviation is modified by following way :
Modification in order to avoid warning
Test case for issue CR24357
Calculate radius of circumcircle as maximum difference between its center and vertices or reference triangle.
Draw test command OCC25547 has been implemented.
Small optimizations for speed.
Update of test-cases according to the new behaviour
Update of test-cases in group mesh
Unstable test cases were reviewed
Modified test cases using checktrend command
Modified test cases for Linux platform
Modified test cases for Debug mode
1. bugs modalg_4 bug697_2 bug697_4 bug697_7 bug697_8 - unstable test cases after fix 25735
Its will be checked and modified during work with performance (issue 24232).
2. bugs mesh bug25364 was tuned for 64-bit Windows.
3. de step_1 ZQ2 fails (64-bit only). Issue 25848 was registered.
4. de step_3 D8 shows improvement (no checkape error) in 64-bit only, this is after 22598 and issue 25797 was registered for that.
5. draft angle G8 improvement (algorithm produces some shape, but fails on checkshape).
6. perf ncollection A1 was tuned for 64-bit Windows.
7. de step_1 R9 - update reference data (according to 25176)
New parameter MinSize has been introduced to BRepMesh and GCPnts_TangentialDeflection;
Check length of remaining part of curve for min size parameter instead of distance between two points to avoid large gaps in case highly distorted BSpline surfaces;
Produce fine mesh for sphere and fix other surface;
Test cases for issue CR25378
Correction of test cases for issue CR25378
Compute parameters to produce regular grid and add new internal points according to calculated values.
Use intervals as an additional parameters to determine regular grid for BSpline surfaces.
Test case for issue CR25519
Correction of test case for issue CR25519
Correction of test cases for issue CR25519
Do not clean polygons that are created for different faces not connected with current shape.
Remove old code producing additional points for BSpline curves due to fix#24959.
Test cases fir issue CR25469
Revert changes producing additional points for BSpline curves with C1 continuity
Test cases fir issue CR25469
Correction of test cases for issue CR25469
OSD_OpenFile.hxx header is created for using in file open operations with Unicode names.
Fix for STEP files reading.
Adding test cases for issue 25367
Update test case for issue 25364
Update test cases due to improvements
Don't create data structures for whole set of faces. Necessary structures are created directly in BRepMesh_FastDiscret.
Don't copy nodes data during scaling, single structure is used.
Remove lines used for debug
Fix sphere: resolve problem came from merging.
Keep code clean - remove unnecessary logic, expected to be used for complicated restoration process.
Test cases for issue CR25364
Test case for 0025142: Visualization breaks triangulation on shared solids in composite solid model
Do not clean the triangulation in StdPrs_ShadedShape::Tessellate() and
let the triangulation tool process the sub-shapes properly.
Treat triangulation consistently in all AIS classes (AIS_Shape, AIS_TexturedShape).
Test cases for issue CR25142
Fix compilation errors on Linux platform
Squeeze compilation warnings on Linux
Fix regressions
Back RemoveFaceAttribute for further reasons
Fix retrieving of polygon by index
Fix applying of location
Test case for issue CR23106
Fix memory leak regression 'test bugs vis bug79' occurred due to incorrect memory cleaning of inherited objects by MMgtRaw::Free through BRepMesh_IEdgeTool;
Replace BRepMesh_PDiscretRoot by pure pointer to BRepMesh_DiscretRoot;
Fix IVtkOCC_ShapeMesher.
BRepMesh_Classifier: Two-pass approach for intersection check with possibility to run it in parallel mode.
First pass - bounding boxes of segments are checked for overlapping;
Second pass - intersection point is calculated in case if overlapping is detected.
Make NCollection_UBTree::ChangeLastNode() exported due to compilation error on Linux platform.
Reason: method does not depend on template parameters, so it should be available.
Revert previous change and try to use another trick for Linux
Fix compilation warning on MacOS: remove redundant constant
Fix regressions: do not consider insignificant loops in case of self intersections on the same wire.
More sugar solution for compilation errors on NCollection_EBTree on Linux
Test cases for issue CR24968
Check is the shape to be meshed has correct poly data, i.e. PolygonOnTriangulation of particular edge connected to the same Triangulation data structure as stored inside a parent face.
Adding test cases for issue CR23631 bugs/mesh/bug23631
Parallel checking of faces/edges
Make BRepMesh_IncrementalMesh class imported from BRepMesh package.
Resolve GCC warnings on Linux platform
Fix compilation errors on MacOs: remove mutable modificator on reference fields.
Increased checking accuracy of endpoints touching of segments.
Code formatting improvement.
Test case for issue CR24775
Correction test case for issue CR24775
Corrections in GeomLib::NormEstim, added norm computing using GeomLProp_SLProps.
Corrections in GeomLib::NormEstim, normal is computed with CSLib::Normal in case of a null normal.
Modified GeomLib::NormEstim Algo in case of null normal.
Added test case bugs/mesh/bug23650
Fix compilation error on Linux
Adding test command for this fix
meshPolygon: simplify source polygon by splitting it onto parts without glued edges and loops
Check surrounded triangles during final cleaning of mesh
Correct polygon on frontier edges
Modified test cases in group mesh according to new behavior
Modified END file of all group bugs. Command nbshape moved to END file. Add begin with variable subgroup
Small correction in END file
Replaced test case bug726_3 from moddata to modalg
Test case tests/bugs/modalg/dxf906 was renamed to bug889
Adding test cases to tests/bugs/moddata
Modified expressions puts [checkshape result]. Added command vzfit in end file in folder bugs. Unlocked command coordload in QABugs_3.cxx
Modified test case bugs vis buc60738
Added test cases to modalg and moddata
Added test cases to caf and fclasses
Added test cases to group heal
