"endl" manipulator for Message_Messenger is renamed to "Message_EndLine".
The following entities from std namespace are now used
with std:: explicitly specified (from Standard_Stream.hxx):
std::istream,std::ostream,std::ofstream,std::ifstream,std::fstream,
std::filebuf,std::streambuf,std::streampos,std::ios,std::cout,std::cerr,
std::cin,std::endl,std::ends,std::flush,std::setw,std::setprecision,
std::hex,std::dec.
Modified method: Approx_ComputeLine::Compute
Check of multicurve is now always unconditional, the procedure of check is modified to avoid infinite loops.
Modified classes: GeomLib_CheckBSplineCurve and GeomLib_Check2dBSplineCurve
Correction of poles at the ends of curve is modified to fit the direction of tangent defined by two first points or two last points of walking line.
Also modified:
BOPAlgo_PaveFiller: modified methods PostTreatFF, RemoveUsedVertices - now unused vertices are included in the list of vertices to be absorbed by other ones.
An extended draw-command trotate (ttranslate, tmirror, ...) by an additional parameter "-copy".
New check of edge range is added in BRepCheck/BRepCheck_Edge.cxx
The same checking is added in ShapeAnalysis_Edge.cxx
Fixing this problem is added in ShapeFix_Wire.cxx
GeomLib::SameRange(...) and BRepTools_TrsfModification::NewCurve2d(...) are modified to avoid exception in TrimmedCurve
New macro Standard_FALLTHROUGH is defined for use in a switch statement immediately before a case label, if code associated with the previous case label may fall through to that
next label (i.e. does not end with "break" or "return" etc.).
This macro indicates that the fall through is intentional and should not be diagnosed by a compiler that warns on fallthrough.
The macro is inserted in places that currently generate such warning message and where fallthrough is intentional.
Doxygen comments are provided for this and other macros in Standard_Macro.hxx.
While checking the SurfaceOfExtrusion on closeness (GeomLib::IsClosed())
it is necessary to take into account that the basis curve may be not trimmed.
Test case for the issue.
Macro NO_CXX_EXCEPTION was removed from code.
Method Raise() was replaced by explicit throw statement.
Method Standard_Failure::Caught() was replaced by normal C++mechanism of exception transfer.
Method Standard_Failure::Caught() is deprecated now.
Eliminated empty constructors.
Updated samples.
Eliminate empty method ChangeValue from NCollection_Map class.
Removed not operable methods from NCollection classes.
Checking of number of knots is added. If number of knots more then allowed value, algorithm does not search distance between curves for each knot interval, but uses predefined sample point distribution.
This change was born in the scope of work on the issue 26329, but does not have direct connection to it. Therefore it has been postponed to be integrated later in its own context.
Test case for issue #28030
1. Check, if value found by math_PSO algorithm cannot be precised by math_NewtonMinimum algorithm. In this case, we call math_PSO algorithm repeatedly, however, with other parameters.
2. Some margin of edge tolerance value has been provided in IntTools_Tools class.
3. Interface of math_NewtonMinimum class has been changed (method GetStatus() has been added).
Correction of some test cases according to their new behavior.
1. Check, if edge is same-range, is now made with some tolerance (not strictly) in GeomLib_CheckCurveOnSurface class. Default value of this tolerance is Precision::PConfusion(). However, this value can be changed with corresponding interface.
2. DRAW-command "attachpcurve" has been added to BOPTest_UtilityCommands.cxx file. This command creates p-curve of given edge on given face. It can assign 2D-curve of one of the edge already included in the face or (if it is not possible) rebuilds new 2D-curve.
Creation of test case for this issue.
Adjusting test case boolean volumemaker A8 according to its new behavior on Windows.
The main reason of the bug is incorrect check, if the edge is seam-edge or not.
In the fix it is determined with new methods in GeomLib class.
The bug is fixed.
Creation of test case for this fix
Small correction in the code
Useless variable MAXTOLERANCEGEOM is removed in order to allow to place point at any distance from curve/surface.
Algorithm is simplified: particular calculations for analytical geometry are removed, only using of Extrema_... is kept.
Test case for issue #27110
1. Inline methods have been moved to hxx-file.
2. Geometric part of BRepLib_CheckCurveOnSurface has been moved to GeomLib_CheckCurveOnSurface.
Move try/catch treatment to low level (from BRepLib_CheckCurveOnSurface to GeomLib_CheckCurveOnSurface).
Adaptations for compiling with GCC 4.7 and 4.8:
- Construction semantics is used for Handle objects being initialized by const Handle objects of derived type, to avoid overload resolution error in GCC 4.7.
- Missing includes added.
- Fixed bugs related to misuse of direct casts of handle.
- Eliminate CLang warnings on uninitialized and unused variables, functions, and expressions
Automatic upgrade of OCCT code by command "occt_upgrade . -nocdl":
- WOK-generated header files from inc and sources from drv are moved to src
- CDL files removed
- All packages are converted to nocdlpack
Code corrected to avoid ambiguous situations due to changed implementation of Handle (overloaded methods accepting handles of different types).
In Adaptor3d_CurveOnSurface added method Load() with two parameters, allowing to avoid ambiguity of cast of handles when calling separate methods Load() for curve and surface, replacing by single call.
In DrawTrSurf and IGESData_IGESWriter, template variants of methods Set() and Send(), respectively, are added to avoid ambiguity when these methods are called with handles to derived types (using SFINAE).
In NCollection_DefineHSequence, method Append() accepting handle to another HSequence is made template, to be available only if argument has compatible type.
Automatic update by command "occt_upgrade . -downcast"
C-style cast of Handle to that of derived type (now illegal) is replaced by call to DownCast()
Const reference local variables of Handle type initialized by result of DownCast are replaced by normal variables.
1. B-spline cache was moved into separated classes: BSplCLib_Cache for 2D and 3D curves and BSplSLib_Cache for surfaces.
2. The cache is used now in corresponding adaptor classes (Geom2dAdaptor_Curve, GeomAdaptor_Curve and GeomAdaptor_Surface) when the curve or surface is a B-spline.
3. Algorithms were changed to use adaptors for B-spline calculations instead of curves or surfaces.
4. Precised calculation of derivatives of surface of revolution is implemented for the points of surface placed on the axis of revolution (Geom_SurfaceOfRevolution.cxx)
5. Small modifications are made to adjust algorithms to new behavior of B-spline calculation.
6. Test cases were modified according to the modern behavior.
7. Changes in BOPAlgo_WireSplitter, BOPTools_AlgoTools, BRepLib_CheckCurveOnSurface and ShapeAnalysis_Wire to use adaptors instead of geometric entities
8. Allow Geom2dAdaptor and GeomAdaptor in case of offset curve to use corresponding adaptor for basis curve
Modification of test-cases according to the new behavior.
New features:
class BOPTools_AlgoTools2D
method:
Standard_Integer BOPTools_AlgoTools2D::AttachExistingPCurve
(const TopoDS_Edge& aEold,
const TopoDS_Edge& aEnew,
const TopoDS_Face& aF,
const Handle(IntTools_Context)& aCtx)
has been added.
Purpose:
To attach P-Curve on surface of the face <aF> from the edge <aEold>
to the edge <aEnew>
It returns 0 in case of success.
Changes:
1. class BOPTools_AlgoTools
method:
Standard_Boolean BOPTools_AlgoTools::IsSplitToReverse
(const TopoDS_Face& theFSp,
const TopoDS_Face& theFSr,
Handle(IntTools_Context)& theContext)
The condition for a point on the surface of a face has been changed.
2. class BOPAlgo_PaveFiller
method:
void BOPAlgo_PaveFiller::MakePCurves()
The treatment of E/E common bocks has been changed
to use mechanism of attacment P-Curves [ I.1 ]
Test case for issue CR25880
Macros ending on "DEB" are replaced by OCCT_DEBUG across OCCT code; new macros described in documentation.
Macros starting with DEB are changed to start with "OCCT_DEBUG_".
Some code cleaned.
Mostly duplicated comments were removed and missing ones were moved
into dedicated class CDL files.
Some more duplicated comments were removed from CDL files.
Correction of merge
Includes of Handle*.hxx headers replaced by include of corresponding class (where possible without redesign of the classes).
Minor correction against compiler warning (vc10 64-bit) in BOPAlgo
Remove double header inclusions
Correction of minor mistake
License statement text corrected; compiler warnings caused by Bison 2.41 disabled for MSVC; a few other compiler warnings on 54-bit Windows eliminated by appropriate type cast
Wrong license statements corrected in several files.
Copyright and license statements added in XSD and GLSL files.
Copyright year updated in some files.
Obsolete documentation files removed from DrawResources.
Added check for cone singularity point, modified isoline checks, deleted check along U and V in GeomLib::NormEstim.
Correction in sign in GeomLib::NormEstim.
Corrections in GeomLib::NormEstim, added norm computing using GeomLProp_SLProps.
Corrections in GeomLib::NormEstim, normal is computed with CSLib::Normal in case of a null normal.
Modified GeomLib::NormEstim Algo in case of null normal.
Added test case bugs/mesh/bug23650
Removing pPotentially uninitialized local variable
Got rid of most of warnings C4701: Potentially uninitialized local variable
Removed redundant variable definitions.
Refactored a part of AppParCurves_ResolConstraint CTOR.
Replaced 0. to Precision::Confusion for tolerance vars;
Changed values for min and max parameter vars;
Got rid of redundant variables' initialization.
