Implemented workaround for dump images with width >= 5462 pix on Intel OpenGl driver.
Changes according to OpenGl_Context::myVendor field in lowercase.
Now roots-references in XCAF Document can be exported to STEP without losing structure of assembly/sharing/metadata of this root. New auxiliary root assembly with each root-reference is created to save all necessary data.
Provide possibility to perform Boolean operations on open solids.
Implementation of the new method *BOPAlgo_Builder::BuildBOP* performing the construction of the result shape for the given type of Boolean operation.
This approach does not rely on the splits of solid to be correct and looks for the faces with necessary state relatively opposite solids to build the result solid.
The call to this method is performed from BOP algorithm in case there were open solids in the arguments.
Implementation of the draw command *buildbop* performing a call to the method above.
Do not allow the precision with which the valid range is found to be less than the epsilon of the max parameter of the edge's range.
Test cases for the issue.
Add history for subshapes of spine: edges and vertices. Each edge of spine generates a shell. Each vertex of spine generates a set of edges and, possibly, faces (in the case of Round Corner).
StdPrs_ToolRFace no skips curves with NULL curves.
Code has been cleaned up from duplicated checks, redundant casts
and dummy Adaptor2d_Curve2dPtr typedef.
StdSelect_BRepSelectionTool::GetSensitiveForFace() now catches
Standard_NullObject exception to skip invalid Edges.
The following improvements have been made in Boolean operations algorithm in order to fix the problem:
1. Initialization of the pave blocks which vertices have acquired the SD ones.
2. Removing from Data Structure the small edges having the same vertices on both ends (either initially or acquired).
3. Avoid adding empty SD connections when one vertex points to itself.
Test case for the issue.
1. The condition of WLine breaking (in IntWalk_IWalking algorithm) has become more independent of the input tolerance.
2. Currently the algorithm of IntPatch_Points of WLine processing depends on the algorithm of obtaining the WLine.
3. The methods IntSurf_LineOn2S::Add(...) and IntSurf_LineOn2S::SetUV(...) have become not inline (see the message ~0077431 in the issue #29866).
Detection of specific case of error in the definition of transformation matrix describing position of the component within assembly, when it has Axis Placements swapped, is corrected to handle the case when one of these Axis Placements is contained in both Shape Representations (of the assembly and its component).
This allows the problematic STEP file to be translated correctly.
Added test bugs step bug30087
BOPTools_AlgoTools::ComputeState - increase the chance of correct classification of the face relatively solid by classifying the point located inside that face instead of the point taken near the edge of that face.
Test case for the issue.
Extended SelectBasics_PickResult structure by myObjPickedPnt field, which contained the value of the 3d point on the selected object.
Changed all Overlaps methods. Parameter theDepth replaced on object of the structure SelectBasics_PickResult. This approach will be able to add new fields to SelectBasics_PickResult structure without big changes in modules which contained Overlaps method.
Methods GeomConvert::ConcatG1, GeomConvert::ConcatC1, Geom2dConvert::ConcatG1, Geom2dConvert::ConcatC1 are corrected to prevent exceeding maximum degree of BSpline curve in case of closed contour.
In the fragment
if (aNewPnt[0] < u1min || aNewPnt[0] > u1max ||
aNewPnt[1] < v1min || aNewPnt[1] > v1max ||
aNewPnt[2] < u2min || aNewPnt[2] > u2max ||
aNewPnt[3] < v2min || aNewPnt[3] > v2max)
{
break; // Out of borders, handle this later.
}
the parameters are compared with values obtained by IntPolyh_MaillageAffinage algorithm and do not have any relations to the domain boundaries.
This misprint has been eliminated.
Before the fix, small arc of circle returned as intersection result. It was connected with the fact that the circle always was limited in 0 and 2*PI points. Currently the bounds of the circle (retrieved as an intersection curve) are computed from the real domain of the arguments (there is not a snap to the fixed 0 and 2*PI points).
Bnd_OBB constructor from Bnd_Box is fixed for VOID input.
DRAW command bounding command is adjusted:
- Support of old syntax 'bounding shape'is restored.
- Exception on VOID bounding box is avoided.
- Arguments are handled in case-insensitive way.
- Options -s, -perfmeter, and ability to set result as first argument are removed as redundant.
- Help is moved to command definition.
Separate command OCC29311 is added (in QADraw) to do the same as option -perfmeter did; tests are updated.
The following improvements have been introduced in Boolean Operations algorithm s:
1. UBTree is replaced with EBTree in Boolean operations to be able to add/remove elements into the tree of bounding boxes.
2. Repeated (nested) intersection of sub-shapes is performed with argument vertices whose tolerances increased during the operation.
3. The algorithms of Edge/Edge and Edge/Face intersection have been improved for the cases when the intersection point is located close to the edge boundaries .
4. New procedure has been implemented to ensure forced creation of Edge/Face common blocks in cases when the edge is really close to the face.
5. Post-processing of Face/Face intersection results has been improved.
6. Extension of the planar faces for Plane/Plane intersection is avoided.
7. Builder Face now better classifies potentially internal edges relatively to new faces with filtering by bounding boxes.
Side effect changes:
1. IntTools_ShrunkRange now keeps the length of the valid range of the edge.
2. The method BOPDS_DS::UpdateEdgeTolerance() has been removed as unused (replaced by the BOPAlgo_PaveFiller::UpdateEdgeTolerance()).
Test case for the issue 0029900.
Test case for the issue 0029711.
Adjustments of the existing test cases.
Avoid using uninitialized variables.
NCollecton_DoubleMap has been extended with two new methods Find1() and Find2()
performing lookup and returning found key withoout throwing an exception
(similar to NCollection_DataMap::Find()).
ViewerTest_DoubleMapOfInteractiveAndName has been redeclared to define
Handle(AIS_InteractiveObject) key instead of Handle(Standard_Transient).
Fast rebuilding of the face is now avoided if its edges have been unified during the intersection.
Full rebuilding of the face is required in this case (using BuilderFace algorithm).
IntTools_Context::IsInfiniteFace() - Make the conclusion about infinity of the face basing on its bounding box only. No need to check NaturalRestriction flag.
Font_BRepFont now uses a dedicated algorithm for text-to-BRep transformation instead of relying on ShapeFix.
It orders wires based on wire classification, analyzes internal zones and creates a few faces (if needed).
TKService dependency from TKShHealing has been dropped.
The algorithm has been corrected to avoid exception.
Now both Draw commands "brollingball" and "rollingball" give correct results.
Test cases "offset faces_type_a A3, A4, A9" are good now.
Now vertex loops on surfaces of revolution are imported from STEP format in the same way as on spheres and b-spline surfaces: in case of a single vertex loop neutral bounds will be used.
Methods SelectMgr_SelectableObject::GetHilightPresentation(), ::GetSelectPresentation() and ::UpdateClipping()
have been corrected to copy clipping planes of the object into highlighting and selection presentations.
Since now a new WLine is not created if its start point lies in another earlier computed WLine. It allows avoiding creation of duplicate WLines in the intersection result.
<!break>
1. Methods IsOutSurf1Box(...), IsOutSurf2Box(...), IsOutBox(...) for classes IntSurf_LineOn2S and IntPatch_RLine have been created.
Interface OpenGl_RenderFilter and its implementations have been merged into OpenGl_Workspace.
This limits flexibility of interface, but simplifies logic.
- OpenGl_RenderFilter_FillModeOnly flag replaces OpenGl_CappingAlgoFilter;
- OpenGl_RenderFilter_NonRaytraceableOnly flag replaces OpenGl_RaytraceFilter;
- OpenGl_RenderFilter_OpaqueOnly flag replaces OpenGl_OpaqueFilter;
- OpenGl_RenderFilter_TransparentOnly flag replaces OpenGl_TransparentFilter.
OpenGl_CappingAlgo now:
- avoids redundant Stencil clearing when Layer contains at least one transparent Element;
- renders semitransparent capping plane within transparent elements pass.
vclipplane command has been extended by new argument -transparency.
readstl syntax has been modified, so that it creates a single-face triangulation by default.
The argument "trinagulation" is no more supported.
The new argument "-brep" has been introduced to generate
a compound of per-triangle faces instead (old default behavior of the command).
The algorithm has been improved for the cases when the intersection line goes through the cone apex.
<!break>
1. All special points are put to the ALine forcefully (if they are true intersection point). Currently this step has not been implemented yet.
2. Now the tolerance of IntPatch_Point (put into ALine) is computed in order to cover the distance between it and the correspond ALine.
3. Test cases have been created.
4. Procedure of trimming IntAna_Curve has been improved.
5. Criterion when the discriminant of IntAna_Curve can be considered to be equal to 0 has been improved.
6. Methods IntAna_Curve::FindParameter(...) (and IntPatch_ALine::FindParameter(...)) currently returns list of all parameters corresponding the given point (IntAna_Curve can be self-interfered curve). Before the fix, this method always returned only one (randomly chosen) parameter.
7. Interfaces of the following methods have been changed: IntAna_Curve::FindParameter(...), IntPatch_ALine::FindParameter(...), IntPatch_ALine::ChangeVertex(...), IntPatch_SpecialPoints::AddPointOnUorVIso(...), IntPatch_SpecialPoints::AddSingularPole(...), IntPatch_WLineTool::ExtendTwoWLines().
8. Following methods have been added: IntAna_Quadric::SpecialPoints(...), IntPatch_ALineToWLine::GetSectionRadius(...), IntPatch_SpecialPoints::ProcessSphere(...), IntPatch_SpecialPoints::ProcessCone(...), IntPatch_SpecialPoints::GetTangentToIntLineForCone(...).
------------------
1) tests/boolean/volumemaker/C5
tests/boolean/volumemaker/C6
tests/boolean/volumemaker/E7
They are real IMPROVEMENTS. In the FIX (in compare with MASTER), section result between pairs of faces f2&f6 (C5), f3&f7 (C6) and f1&f5 (E7) is closed. Separated test cases have been created in order to focus on the problem with section. Bug #28503 has been fixed.
Correction in test cases.
Argument of LowerCase() and UpperCase() is cast to int via unsigned char to avoid passing negative integer in the case if the argument char is in the extended part of ASCII table (which would result in undefined behavior according to C++ standard).
Check for double solutions has been added in algorithms Extrema_ELPCOfLocateExtPC and Extrema_ELPCOfLocateExtPC2d
that find extrema between point and curve.
XCAFDoc_ShapeTool::Expand method now avoids creation of subshapes under assemblies.
XCAFDoc_ShapeTool::AddSubShape now avoids creation subshapes under all labels except for simple parts.
Use of input tolerance has been eliminated in Geom2dInt_GInter algorithm called from BRepClass_Intersector::Perform(...) method.
Now the input tolerance is used only for checking ON-status of classification.
