Macro NO_CXX_EXCEPTION was removed from code.
Method Raise() was replaced by explicit throw statement.
Method Standard_Failure::Caught() was replaced by normal C++mechanism of exception transfer.
Method Standard_Failure::Caught() is deprecated now.
Eliminated empty constructors.
Updated samples.
Eliminate empty method ChangeValue from NCollection_Map class.
Removed not operable methods from NCollection classes.
Added DRAW command dsetsignal, resetting OSD signal handler with either armed or disabled FPE handler, according to an option.
If called without arguments, it sets FPE handler only if environment variable OSD_FPE is defined (with value different from 0).
On start, DRAW calls dsetsignal to set FPE signal if CSF_FPE is defined.
Test bugs fclasses bug6143 uses dsetsignal to set FPE handler unconditionally before the test command, and resets it to default at the end.
A number of changes in the code have been done in order to fix floating point exceptions that became generated after enabling signals:
- Global functions Sinh() and Cosh() defined in Standard_Real.hxx are improved to raise Standard_NumericError exception if argument is too big (greater than 710.47586), instead of relying on system treatment of floating point overflow. These functions are used instead of sinh and cosh in ElCLib.cxx.
- Maximal value of parameter on hyperbola is restricted by 23 (corresponding to ~1e10 in 3d) in order to avoid FP overflow in Extrema_GenExtCS.cxx, ShapeFix_EdgeProjAux.cxx.
- Interface of the root curve adaptor class Adaptor3d_Curve has been updated to add new virtual methods BasisCurve and OffsetValue. They complement the adaptor for the case of offset curves. These methods are used in Extrema_GenExtCS.cxx to restrict domain search in the case of offset of hyperbola, in order to get rid of floating point overflow. All classes inheriting Adaptor3d_Curve have been changed to implement the new virtual methods.
- Protection against division by zero has been implemented in ApproxInt_KnotTools.cxx, BRepClass3d_SClassifier.cxx, BRepGProp_Face.cxx, BRepMesh_FastDiscretFace.cxx, Geom2dGcc_Circ2d2TanOnIter.cxx, Geom2dInt_Geom2dCurveTool.cxx, IntPolyh_MaillageAffinage.cxx.
- Protection against calling of math functions of infinite arguments has been added in BRepCheck_Edge.cxx, BRepLib.cxx, CSLib_NormalPolyDef.cxx, Extrema_FuncExtPC.gxx, Extrema_GExtPC.gxx, Extrema_GLocateExtPC.gxx, Intf_InterferencePolygonPolyhedron.gxx, ShapeAnalysis_Surface.cxx, ShapeAnalysis_TransferParametersProj.cxx, ShapeAnalysis_Wire.cxx, math_FunctionSetRoot.cxx.
- Proper initialization of local variables is done in BOPAlgo_PaveFiller_6.cxx, XSDRAWSTLVRML.cxx.
- Inconsistent usage of Standard_Boolean* to access integer data in HLR (caused by #27772) is corrected
Some test cases have been updated to actual state.
Code has been updated to remove no-op casts and implicit casts to Standard_Boolean.
Places of inproper use of Standard_Boolean instead of Standard_Integer
have been corrected:
- Bnd_Box, Bnd_Box2d
Bit flags are now defined as private enum
- HLRAlgo_BiPoint, HLRAlgo_EdgesBlock, HLRBRep_EdgeData, HLRBRep_FaceData
Bit flags are now defined as enum
- HLRAlgo_EdgeStatus, HLRBRep_BiPnt2D, HLRBRep_BiPoint
Bit flags are now defined as bool fields
- HLRAlgo_PolyData
Bit flags are now defined as Standard_Integer
- OSD_DirectoryIterator, OSD_FileIterator
Boolean flag is now defined as Standard_Boolean
- ShapeAnalysis_Surface::SurfaceNewton()
now returns Standard_Integer (values 0, 1 or 3)
- ChFi2d_FilletAlgo
now uses TColStd_SequenceOfBoolean instead of TColStd_SequenceOfInteger
for storing boolean flags
Method IFSelect_Dispatch::PacketsCount() has been dropped from interface.
ShapeFix_Solid::Status() has been fixed to decode requested status
instead of returning integer value.
TopOpeBRepBuild_Builder1 now defines map storing Standard_Boolean values
instead of Standard_Integer.
Persistence for Standard_Boolean type has been corrected
to keep backward compatibility:
- BinMDataStd, BinTools, FSD_BinaryFile
Broken Draw Harness commands vdisplaymode and verasemode have been removed.
BRepMesh_FastDiscretFace::initDataStructure() - workaround old gcc limitations
BRepMesh_IncrementalMesh::clear() - avoid ambiguity
1) Reduce the number of calls to malloc by grouping requests to larger blocks. To achieve this goal, the following ways are used:
- Containers of types sequence, list and map are initialized with an instance of NCollection_IncAllocator, at this taking care of the time of life of allocated objects, so that not to occupy huge amount of memory.
- Allocation of several arrays having the same and short life time is changed so that to allocate a buffer array of necessary size and to place arrays in this buffer.
2) In BRepMesh_FastDiscretFace, optimize the function filterParameters so that to avoid excess memory allocations.
3) In NCollection_CellFilter, change declaration of the method Reset to accept array by reference rather than by value.
4) Add Allocator() method in map, sequence and vector collection classes by analogy with list collection.
5) Correct the size of block for IncAllocator for x64 platform. In order free-ed block to be returned to the system its size should be at least 1024K on x64 and 512K on x86. This allows to retain free virtual space almost to the state before algorithm run.
6) Decrease amount of memory zeroed by calloc. For that, reduce theIncrement parameter of the embedded vectors of the classes NCollection_UBTreeFiller and BRepMesh_VertexInspector to default value 256.
7) Avoid computing bounding box when not necessary (if no relative deflection is used)
8) Cycles by wires of face using TopExp_Explorer are converted to use TopoDS_Iterator instead.
9) BRepMesh_FastDiscret::Add optimized to avoid storing sequences of faces and edges
10) The tests "mesh standard_* W7" are corrected to accept the new behavior. Earlier the following error took place:
Not connected mesh inside face 9
{12 13}
Now this error was replaced with another one:
free nodes (in pairs: face / node):
{9 12}
Actually it is not a regression, rather improvement, if we look at the snapshot.
11) Change other test cases to their actual state.
* Implement GeomEvaluator package
* Inject evaluators to GeomAdaptor_Surface to calculate values of complex surfaces
* Inject evaluators to Geom_Surface classes to calculate values for offset surfaces, surfaces of revolution and surfaces of extrusion
* Move Adaptor3d_SurfaceOfLinearExtrusion and Adaptor3d_SurfaceOfRevolution to GeomAdaptor and unify calculation of their values and derivatives
* Code optimizations
* Update test cases
Update of test-cases according to the new behavior
Adaptations for compiling with GCC 4.7 and 4.8:
- Construction semantics is used for Handle objects being initialized by const Handle objects of derived type, to avoid overload resolution error in GCC 4.7.
- Missing includes added.
- Fixed bugs related to misuse of direct casts of handle.
- Eliminate CLang warnings on uninitialized and unused variables, functions, and expressions
Automatic upgrade of OCCT code by command "occt_upgrade . -nocdl":
- WOK-generated header files from inc and sources from drv are moved to src
- CDL files removed
- All packages are converted to nocdlpack
Code corrected to avoid ambiguous situations due to changed implementation of Handle (overloaded methods accepting handles of different types).
In Adaptor3d_CurveOnSurface added method Load() with two parameters, allowing to avoid ambiguity of cast of handles when calling separate methods Load() for curve and surface, replacing by single call.
In DrawTrSurf and IGESData_IGESWriter, template variants of methods Set() and Send(), respectively, are added to avoid ambiguity when these methods are called with handles to derived types (using SFINAE).
In NCollection_DefineHSequence, method Append() accepting handle to another HSequence is made template, to be available only if argument has compatible type.
1. B-spline cache was moved into separated classes: BSplCLib_Cache for 2D and 3D curves and BSplSLib_Cache for surfaces.
2. The cache is used now in corresponding adaptor classes (Geom2dAdaptor_Curve, GeomAdaptor_Curve and GeomAdaptor_Surface) when the curve or surface is a B-spline.
3. Algorithms were changed to use adaptors for B-spline calculations instead of curves or surfaces.
4. Precised calculation of derivatives of surface of revolution is implemented for the points of surface placed on the axis of revolution (Geom_SurfaceOfRevolution.cxx)
5. Small modifications are made to adjust algorithms to new behavior of B-spline calculation.
6. Test cases were modified according to the modern behavior.
7. Changes in BOPAlgo_WireSplitter, BOPTools_AlgoTools, BRepLib_CheckCurveOnSurface and ShapeAnalysis_Wire to use adaptors instead of geometric entities
8. Allow Geom2dAdaptor and GeomAdaptor in case of offset curve to use corresponding adaptor for basis curve
Modification of test-cases according to the new behavior.
The constructors of classes from following files have been fixed to ensure that all non-static fields are initialized:
Adaptor2d_Line2d.cxx
Adaptor3d_IsoCurve.cxx
Adaptor3d_OffsetCurve.cxx
AdvApp2Var_ApproxAFunc2Var.cxx
AIS_Dimension.cxx
AIS_InteractiveContext.cxx
Aspect_DisplayConnection.cxx
BiTgte_CurveOnEdge.cxx
BiTgte_CurveOnVertex.cxx
BRepAdaptor_CompCurve.cxx
BRepMesh_Circle.hxx
BRepMesh_Delaun.cxx
BRepToIGES_BREntity.cxx
ChFi2d_AnaFilletAlgo.cxx
ChFi2d_ChamferAPI.cxx
ChFi2d_FilletAlgo.cxx
ChFi2d_FilletAlgo.hxx
Extrema_ExtPExtS.cxx
Font_FTFont.cxx
GccEnt_QualifiedCirc.cxx
Geom2dAdaptor_Curve.cxx
IGESData_IGESEntity.cxx
IGESData_DefSwitch.cxx
IGESToBRep_CurveAndSurface.cxx
LDOM_XmlReader.cxx
math_TrigonometricFunctionRoots.cxx
NCollection_ListNode.hxx
ProjLib_CompProjectedCurve.cxx
ProjLib_ComputeApproxOnPolarSurface.cxx
Select3D_Box2d.hxx
Select3D_PointData.hxx
Mostly duplicated comments were removed and missing ones were moved
into dedicated class CDL files.
Some more duplicated comments were removed from CDL files.
Correction of merge
Redundant keyword 'mutable' removed in CDL files.
In IGESConvGeom_GeomBuilder, unused methods MakeXY() and MakeXYZ() removed.
Method StepAP214_AutoDesignGroupAssignment::Init() replicating same method of the base class is removed as it causes CDL extraction error after above (seemingly irrelevant) changes.
Classes NCollection_Set and NCollection_HSet removed as unused (along with NCollection_DefineSet.hxx and NCollection_DefineHSet.hxx).
Classes TCollection_Set and TCollection_HSet removed (along with TCollection_SetIterator and TCollection_SetList nested classes).
Code previously using Set classes updated to equivalent use of Sequence (Adaptor3d and Visual3d packages) or TColStd_PackedMapOfInteger (BRepAlgo package).
In Adaptor3d_CurveOnSurface, calculation of continuity intervals refactored so as to build and store sorted sequence of reals, instead of collecting them to set, copying to array, and then sorting.
Includes of Handle*.hxx headers replaced by include of corresponding class (where possible without redesign of the classes).
Minor correction against compiler warning (vc10 64-bit) in BOPAlgo
Remove double header inclusions
Correction of minor mistake
License statement text corrected; compiler warnings caused by Bison 2.41 disabled for MSVC; a few other compiler warnings on 54-bit Windows eliminated by appropriate type cast
Wrong license statements corrected in several files.
Copyright and license statements added in XSD and GLSL files.
Copyright year updated in some files.
Obsolete documentation files removed from DrawResources.
When warnings are enabled, compilers report lots of occurrences
of unused local variables, which makes it harder to find other
meaningful warnings.
This commit does not fix all unused local variables.
Fix new type conversion warning
Code cleaned to avoid MSVC compiler warnings on unused function arguments.
Several useless pieces of code are removed.
Changes in IntTools_EdgeFace.cxx, Blend_Walking_1.gxx, Bnd_BoundSortBox.cxx, ProjLib_ProjectedCurve.cxx are reverted (separated to specific issue for more in-depth analysis).
Eliminated warnings -Wswitch shown by gcc
Eliminated two new warnings about wrong initialization order
Eliminated warnings about unused functions.
A few more ICC warnings (type conversions) fixed
Removed warning of cppcheck on uninitialized class members for non-array cases
New additional compilation warnings on Windows platform from file OSD_Path.cxx were fixed
Warnings about wrong initialization removed
Eliminated ICC 14 warnings:
# 82: storage class is not first (e.g. "int static f()"
# 2621: attribute "dllexport" does not apply here (e.g. "Standard_EXPORT typedef int qqint;")
# 2415: variable "..." of static storage duration was declared but never referenced
# 111: statement is unreachable (usually "break" after "return" in cycles)
Removing pPotentially uninitialized local variable
Got rid of most of warnings C4701: Potentially uninitialized local variable
Removed redundant variable definitions.
Refactored a part of AppParCurves_ResolConstraint CTOR.
Replaced 0. to Precision::Confusion for tolerance vars;
Changed values for min and max parameter vars;
Got rid of redundant variables' initialization.
Fix first subset of warnings (about 100)
- while(1) and similar constructs replaced by for(;;)
- some uninitialized variables corrected
Got rid of Warning C4189: local variable is initialised but not referenced
Corrected mistakes after getting rid of C4189 compiler warning
Corrected some mistakes that led to compiling errors
Fixed test case because of improvement message - removed unnecessary TODO.
Small fix: tabs have been replaced with whitespaces.
Added TODO for Windows platform
removed last TODO
Corrected mistakes, returned some #ifdef DEB code, fixed test case .
Restoring a few places which have been modified too much
Small grammar fix
Deleted unnecessary puts in bugs/end
The fix is to keep the correlation between numbers of segments in U and V parametric directions (nbu and nbv).
When minimal of these numbers (f.e. nbu) is set to default minimal value (10), other (nbv) is set to Min(30, nbv*(default/nbu)). 30 is used to avoid too small segments.
Added test case bugs/modalg_5/bug23782
