1) Try-catch block was added on a StepToTopoDS_TranslateEdgeLoop::Init() to
catch Standard_ConstructionError during the Curve conversion.
2) Checks of BSpline curve degree added to prevent construction error when converting edges to BSpline_Curve.
3) Warning message was added in case of incorrect curve definition.
Correct of the test cases according to the new error message added with fix
Conflicts:
tests/de/step_1/R9
Modified test cases according to new reference data
Interface_CheckTool does not reset the Check added to CheckList now.
Added test case bugs/xde/bug25176
Update reference data in test cases.
Resolving conflicts:
tests/de/iges_3/A4
tests/de/step_1/R7
tests/de/step_2/H1
Check whether p-curve being projected can be approximated by straight line is made before full-scale projection, to improve performance.
If straight, pcurve is created as Line only if this will lead to the same range parameterization as 3d curve, otherwise BSpline of degree 1 is created.
Re-approximation of line pcurves by bsplines removed from ShapeFix_Edge.
Test case updating to new behavior.
Added "static" keyword to the fixPeriodictyTroubles() function.
Update of test-cases according new behavior
New features:
1. class BRepCheck_Solid
The class is to check a solid per se.
The scan area is:
i. Shells that overlaps each other
Status: BRepCheck_InvalidImbricationOfShells
ii. Detached parts of the solid (vertices, edges)
that have non-internal orientation
Status: BRepCheck_BadOrientationOfSubshape
iii. For closed, non-internal shells:
iii.1 Shells containing entities of the solid that
are outside towards the shells
Status: BRepCheck_SubshapeNotInShape
iii.2 Shells that encloses other Shells
(for non-holes)
Status: BRepCheck_EnclosedRegion
Changes:
1. enumeration BRepCheck_Status
members:
InvalidImbricationOfShells,
EnclosedRegion,
has been added
2. class BRepCheck
method:
void BRepCheck::Print(const BRepCheck_Status stat,
Standard_OStream& OS)
has been modified to take into account II.1
3. class BRepCheck_Analyzer
method:
void BRepCheck_Analyzer::Put(const TopoDS_Shape& S,
const Standard_Boolean B)
has been modified to take into account I.1
4. class BRepTest
function:
void StructuralDump(Draw_Interpretor& theCommands,
const BRepCheck_Analyzer &theAna,
const Standard_CString ShName,
const Standard_CString Pref,
const TopoDS_Shape &theShape)
has been modified to take into account I.1, II.1
Test cases for issue CR25509
Correction of test cases for issue CR25509
1. DRAW-commands for curve/surface continuity returning were changed.
2. Output of "distmini" DRAW-command is amended.
3. Function MinMax() was moved from Standard_Real to IntPatch_ImpImpIntersection_4.gxx.
4. Incorrect computing of nbcurveC1 in Geom2dConvert::C0BSplineToC1BSplineCurve(...) function was liquidated.
Test cases were changed.
Method STEPConstruct_Styles::LoadStyles() now imports StepVisual_StyledItem entities even if they was defined without StepVisual_MechanicalDesignGeometricPresentationRepresentation or StepVisual_DraughtingModel entity
Update of reference data
1. Method "SetValues()" for gp_Trsf2d class is added.
2. Method Orthogonalize for gp_Trsf2d and gp_Trsf classes was added.
3. Unused arguments from "SetValues()" method for gp_Trsf was deleted.
4. Output of AppParCurves_MultiPoint Dump was corrected.
5. Method of right projected point choosing was corrected in ProjLib package.
6. Some test cases were changed according to their new behavior.
OSD::SetSignal() called with Standard_False argument to have FPEs disabled.
Test cased modification:
de step_4 G7 - fixed reference data.
de iges_2 H9 - Fixed reference data. According to input file, there are big tolerance edge and surface, which leads to big tolerance in ref data, result and image has changed due to usage of these shapes instead of omitting them.
de end - changed behavior in case of big isolines, now isolines not break fit command in certain places.
Modeling algorithms:
Fixed 0.0 / 0.0 uncertainty in circle to quasi-angular bspline conversion.
Correction of test cases for issue CR24589
fix the notched edges twice per face - before checking for missing seam and after
Test case correction for issue CR24983
Add check for invalid Surface of linear extrusion (with basis curve - line and extrusion direction parallel to this line) during converting STEP surface
Small corrections of test cases for issue CR24983
Add checks for cone-like surfaces during seam fixing
Delete check for missing degenerated edge for cones in FixMissingSeam() function, because this check is exist in FixPeriodicDegenerated(). Check for uniqueness of wire is unnecessary after this.
Update of test-cases
Range of changing of some analytic curves is computed by other methods. It allows computing face's boundaries with more precise.
Tolerance was increased to provide successful work of some algorithms.
Functions BRepOffsetAPI_MiddlePath::Build() and ApproxWithPCurves(...) (file IntTools_FaceFace.cxx) were changed according to new result of algorithm's work.
It is possibly for "outboundaried faces" (see bug#23675) to compute incorrect UV-Bounds, when first parameter is more than last. To avoid it, extended control of computed bounds was added.
Function for fail sameparameter fixing was added to HLRAppli_ReflectLines to avoid creation bad shapes after algorithm's work.
In file ShapeFix_ComposeShell.cxx only text formatting was changed.
Some test cases are changed according to their new behavior.
Added test case bugs/moddata_3/bug23511
MAIN CHANGES:
FixAddNaturalBound: the boundaries of "natural bound addition" are restricted: a face, that does not contains an outer wire, should not have any infinite UV boundaries due to new face building (with using a surface) requires specified UV boundaries.
FixAddNaturalBound: myResult is updated in FixAddNaturalBound when the method creates a new face with natural boundary. myResult is required to be updated for next "fix small-area wires" algorithm
IsPeriodicConicalLoop: incorrect working BRepTools_WireExplorer was replaced on TopoDS_Iterator.
a natural bound is added to all the faces are constructed with UV-periodical surfaces (not only sphere and torus; e.g., closed b-splines)
other:
ShapeAnalysis: ReverceSeq renamed to ReverseSeq
BRep_Tool Pnt and Tolerance has the check for null TShape
Test cases for issue CR24249
required null checks were added
test cases were corrected according to their new behavior
Correction test case for issue CR24249
Projection of 3d points corresponding to range of edge on 2d curve considered as successful for all cases to except for cases when projection is not made.
Initialization initial values of flags
Modification initial values of flags setting status Done for first and last parameters
Adding new draw-command for issue CR24370
Test case for issue CR24370
1. Modified test cases to improve using of Japanese characters
bugs vis bug22149
bugs vis bug22796_2
2. Modified test case bugs vis bug23813 to avoid regression caused by using vdump command with non-default parameters on remote PCs
bugs vis bug23813
3. Behavior change of test case de iges_2 B1 in DEBUG mode on Linux and Windows platforms (OCC24442)
de iges_2 B1
Modification to avoid creation of redundant labels in XCAF for any shapes belonging compound even if colors are not defined for them.
Fix to avoid compiler warning.
Fix for regression for test case de iges_2 A6
Test case for issue CR23921
Refactoring on current master fix for bug 0024008: ShapeAnalysis_Surface causes exception in Geom_OffsetSurface.
And modified test scripts in order to avoid report regressions
Test cases for issue CR24008
Fixed creation of extrema curve in debug mode.
Deleted space between ";" and "V" in debug output to make "llength" DRAW funcion work correctly in debug mode.
Deleted TODOs in tests/bugs/modalg_5/bug24327
Deleted TODOs in test cases with improvement in extrema output. Increased cpulimit in de, boolean and perf.
Added test case bugs/modalg_5/bug23708
Improvements in test case de/step_3/B8 (problem in second TODO is not reproduced)
Modified test case de/iges_2/H1 regarding to new reference data
Test case and new draw command for issue CR24137
Modified test case de/iges_1/G9 according to new data
Small correction of test cases for issue CR24137
In cutting sphere it's seam edge was divided into two parts(by cylinder),
but pcurves of the second were not shifted during shape healing.
Test cases correction
Fix that face, in which only wire was reordered during shape healing, was not replaced.
Add test case for this fix
Add status for shifted wires in reordering.
Modified test case de/step_1/E3 according to new reference data
Add check for too small distances during edges reordering
Fix writing TrimmedSurface (Type 144).
Fix checking for too small distances between loops of edges during edge's reordering.
Add checking for too small BSpline segments during reading and writing IGES.
Fix wire splitting by adding checking that vertexes same not only in 3d, but in 2d too.
use tolerance of vertexes recomputed through resolution surface, not 2d curves.
Adding test case for this fix
Modified test case bugs iges bug23746 and cases in group de according to new reference data
Added treatment of the vertex as a single object.
Added test case bugs/modalg_5/bug24060
Modified shape's extension in test cases bugs/moddata_3/bug23943_3 bug23943_4
Modified test cases in group de according to new reference data in issue 24035
tolreached initialized (src\ChFi3d\ChFi3d_Builder_6.cxx);
LocalTransition initialized in deb case (src\HatchGen\HatchGen_Hatcher.gxx);
vprev initialized (src\Blend\Blend_Walking_3.gxx);
uprev initialized (src\BRepBlend\BRepBlend_SurfRstLineBuilder.cxx);
lxp initialized (src\Interface\Interface_FloatWriter.cxx)
pBuff initialized (src\OSD\OSD_Process.cxx)
aPrefix initialized (src\RWStepBasic\RWStepBasic_RWSiUnitAndPlaneAngleUnit.cxx)
ier initialized AdvApp2Var/AdvApp2Var_ApproxF2var.cxx
FacRevolInfini initialized BRepFeat_MakePrism.cxx
default action of "switch" returned
nombre mas of chars was expanded to 1024 (had been 20). this expansion helps avoiding the error of conversion a float number to mas of chars: the size of mas is enough for converting float number now.
Changed status (todo ?) of tests: de step_5 A6 B3, de iges_3 A9
asymmetrical check in Standard_Boolean IntCurve_IntPolyPolyGen::findIntersect was changed to symmetrical.
fix wrong calculation of approx parameter on curve for last polygon segment
Added test case bugs/modalg_5/bug24035
Modified TODO in "de" test cases because there are small differences with old behaviour
Modified test case heal/split_closed_faces/G5 because of corrections in intersector's behavior, which lead to changes in checkshape
