IntPatch_ALineToWLine.cxx - setting minimal number of points in a WLine depending on step size
IntPatch_WLineTool.cxx - fix WLines connecting check condition
test cases has been changed according to new behavior
Add the case of closed, smooth but not periodic surface (unification of faces lying on it if the flag "myConcatBSplines" is true - modify the underlying surface to make it periodic).
A flag not to raise an exception is used on reading of an XCAF document. If such a shape with scaling transformation is stored in the document, it should be read.
Use distance criteria additionally to parameter criteria when verifying the extrema solution to belong to the edge boundary.
Refactor the BRepExtrema_DistanceSS class to remove the excessive methods with mirrored parameters.
A copy of myface is made, where further on the copy the geometry changes. We connect the face, wire, edge of the original shape with the one whose geometry was changed. This is done in order to get the original shape in the TransferWire() and TransferEdge() methods.
In STEPCAFControl_Writer::WriteNames, write the names of components
even if the name of the assembly is absent.
In STEPControl_ActorWrite::TransferSubShape, move assembly structure
information to the beginning of the list of results, so that CDSR
information of this assembly became preceding CDSR of any sub shapes.
- Added getting and setting Material, VisMaterial and Props to XCAFDoc_Editor::Expand.
- Added XCAFDoc_Editor::Extract to transfer part to a new location
- XCAFDoc_Editor::Extract allows to extract a part as a component or simply extract to an empty label with attached colors, layers, materials, vismaterials and props
- Added XCAFDoc_Editor::CloneMetaData to clone shape's attributes to new location
- Added XCAFDoc_Editor::CloneShapeLabel to clone shape to new document
- Added XCAFDoc_DocumentTool::Check*Tool methods to check an existing of an any tool
- Protected against creating a new label for non-existent tools via extract or expand process
move algorithm of obtaining results from function gproject to method ProjLib_CompProjectedCurve::Perform;
fix tolerances in ProjLib_PrjResolve::ProjLib_PrjResolve;
new treatment of myMaxDist;
use extend bounds in approximation;
add test;
test case "bugs modalg_5 bug25980", "bugs modalg_7 bug24185" have been changed according to new behavior.
incmesh - added -prs option to use StdPrs_ToolTriangulatedShape::GetDeflection() as meshing parameters.
vdisplay, XDisplay - added -autoTriangulation option to manage meshing behavior before displaying a shape.
trinfo - added output of meshing parameters.
Fixed broken incmesh syntax usage in several test cases.
Correct local function ReconstructMissedSeam: use copy of existing pcurve for seam edge reconstruction to prevent possible corruption of another edges.
Fixed a problem with handling slashes and apostrophes
Changed cleaning of the 'TEXT' fields of the step entity to direct order w/o removing operations
Changed converting text locale to covert before cleaning directives and specials symbols (all directives and sp. symbols encoded in ASCII[0-125] and haven't any differ with any locals)
Special case, when directives have two slashes before name changed to don't handle directives value and converts as is (combine two slashes as one and write, for example "\\X2\00C3" as "X2\00C3")
Corrected Geom2dConvert_CompCurveToBSplineCurve::Add in Geom2dConvert_CompCurveToBSplineCurve.cxx;
Added the test for this problem;
Corrected "gluing" curves in ProjLib_ProjectedCurve.cxx.
Fixed exception when trying to calculate line and edge normal in methods HLRBRep_Data::OrientOutLine and HLRBRep_Data::OrientOthEdge, added a check for the existence of the normal before subsequent calculations. A correct check for zero derivative, correction of floating point error and division by zero determinant directly in HLRBRep_EdgeFaceTool::CurvatureValue was set.
1. Correct local function TransformPCurves of ShapeUpgrade_UnifySameDomain: take into account the case of seam edge.
2. Correct local function ReconstructMissedSeam of ShapeUpgrade_UnifySameDomain: use previously stored seam edge in some cases.
BRepTools/BRepTools_NurbsConvertModification.cxx -
Checking domain of 2dCurves if surfaces are periodic is improved
tests/bugs/moddata_3/bug32557 - test case added
IntPatch/IntPatch_WLineTool.cxx - adding control of maximal ratio of distances between 3 sequential points.
tests/bugs/modalg_7/bug32569 - new test case added
tests/lowalgos/intss/bug29972_1 test case is modified according new behavior of intersection algorithm
Update information about ON/IN sub-shapes for all touched faces when intersection with shapes of lower types (edges and vertices) complete.
Previously only the faces participating in the Face/Face intersection were updated.
Modified the method void RWStepGeom_RWBSplineSurfaceWithKnotsAndRationalBSplineSurface::ReadStep
Added processing B spline surface with knots and rational B spline surface with empty data in the name field
Added test
BRepTools/BRepTools_WireExplorer.cxx - replace MapOfShape vmap by IndexedMapOfShape
to avoid random behavior of algorithm
bugs/moddata_3/bug30422 - new test case added
Modified the method TopoDSToStep_MakeStepFace::Init
Added processing of degenerate toroidal surfaces, which are the base surfaces of offset surfaces
Added test
0030620: Tests - perf/bop/buildfaces does not match description (broken)
Allow using meaningful parameters for the commands bbop and bapibop:
* common - for Common operation
* fuse - for Fuse operation
* cut - for Cut operation
* tuc/cut21 - for Cut21 operation
* section - for Section operation
Add description for the commands dealing with Boolean/GF/Split operations.
Validate arguments of these commands.
Correct test case perf/bop/buildfaces to perform GF execution in parallel and serial modes - compare the results.
The following classes have been removed as obsolete:
- BRepAlgo_BooleanOperation
- BRepAlgo_Fuse
- BRepAlgo_Cut
- BRepAlgo_Common
- BRepAlgo_Section
The corresponding classes from BRepAlgoAPI package have to be used instead.
Draw commands:
- fuse
- cut
- common
- section/psection
have also been removed as obsolete.
The corresponding commands for modern Boolean operations algorithm (bfuse/bcut/bcommon/bsection) have to be used instead.
Adjustment of the test cases to use the commands for modern algorithm.
Update BOP commands to use progress indicator
Deleted wrong usage of progress indicator from bop operations
Added UserBreak() method to break execution boolean operation if progress indicator is used
Added method AnalyzeProgress() to calculate steps of progress indicator
Introduce BOPAlgo_ParallelAlgo which has myRange as a field to be used in parallel vector.
Provide suitable way of keeping the progress steps of operations.
Give meaningful names to progress scopes.
Propagate progress indicator into deeper methods of BOA.
Add progress indicator to BOPAlgo_BuilderFace and BOPAlgo_WireSplitter, BOPAlgo_BuilderSolid and BOPAlgo_ShellSplitter
Possibility for adding LengthUnit info to XCAF document using special class XCAFDoc_LenghtUnit and XCAFDoc_LenghtUnitTool is implemented.
Package UnitsMethods is split: geom methods were placed to new file GeomConvert_Units which is in the toolkit TKXSBase, internal step scale factors was placed to StepData.
Updated UnitMethods to convert scale factor to different unit types.
Now, XSAlgo::XSAlgo_AlgoContainer is used to update unit info from static interface values.
New Draw command "XSetLengthUnit" and "XGetLengthUnit" for set or get XDE attribute.
Upgraded tests for STEP, IGES, OBJ, glTF, VRML formats to check area regressing with used unit.
Upgraded tests\de test cases to use any units in the "loop back" algorithms.
Implementation of raising exception while using scale and mirror transformation in shape location
TopLoc/TopLoc_Location.hxx
TopoDS/TopoDS_Shape.hxx
Implementation of new tools for removing forbidden locations from shapes:
BRepTools/BRepTools_PurgeLocations.cxx
BRepTools/BRepTools_PurgeLocations.hxx
BRepTools/BRepTools.cxx
BRepTools/BRepTools.hxx
Draw commands for transforming shapes are corrected, new draw commands: purgeloc, checkloc added
BRepTest/BRepTest_BasicCommands.cxx
Fixing unstable test bug xde bug24759
StepToGeom/StepToGeom.cxx
All other C++ commits are modification of algorithms used mainly in import/export operations in order to allows these operations if shape locations contains scale and mirror transformations.
New test for command purgeloc added
tests/bugs/moddata_3/bug27457
tests/bugs/moddata_3/bug27457_1
tests/bugs/moddata_3/bug27457_2
Some test corrected according to modifications.
Added the implementation of bndbox<->line and bndbox<->segment intersections for 2D to Bnd_Box2d
Added the speedup for 2d classification to BRepClass_Intersector.cxx
Added the test for our improvement
