1) Treatment of case when projection algorithm to BSpline surface return null 2d curve.
2) Changed approximation of next step in default projection algorithm.
3) Special handling of surface of revolution added.
"Period jump" handling evaded in case when curve not computed.
Test cases for issue CR25892
Small correction of test cases fot CR25892
- Work with strings optimized in Tcl procedures used in testdiff command
- CPU and memory differences output of testdiff command improved to give relative change in percents
- Cumulative CPU and memory differences are output for test grids
- In HTML output of testdiff command, deviations of memory and CPU measurements greater than 5% are colored (red or green)
- Search of image files in testdiff command corrected to avoid wrong attribution of image file to issues starting with the same first letters; images must start with the test case name, optionally followed by underscore or dash and arbitrary text
- Image_Diff tool optimized for the case if images are exactly the same
- Perf_Meter class output corrected, destructor made non-virtual
- DRAW command diffimage optimized to not save diff files if there is no difference
- Tests User Guide updated according to these changes and actual state
Force stable work of the algorithm BRepAlgo_Loop by replacing DataMap collections with List and/or IndexedDataMap in order to provide iterations independent on the memory addresses.
Avoid uninitialized fields in default constructor of Extrema_POnSurf.
Mark bad tests as known bad.
AIS_InteractiveObject::Redisplay now redirects the execution to interactive context;
All calls to AIS_InteractiveObject::Redisplay were replaced by AIS_InteractiveContext::Redisplay
Small correction of test case
- Graphic3d_CGraduatedTrihedron: moved to Graphic3d_GraduatedTrihedron, added Graphic3d_AxisAspect for axes parameters
- OpenGl_GraduatedTrihedron: moved to primitive arrays, used Graphic3d_GraduatedTrihedron to store parameters
- ViewerTest: corrected vgraduatedtrihedron, added new parameters
- Graphic3d_ArrayOfPrimitives: added AddVertex (Graphic3d_Vec3)
- Graphic3d_GraphicDriver::GraduatedTrihedronMinMaxValues corrected interface
- properly process 0-density material - create STEP density structures if and only if the density is > 0
- properly process 0-density material - create STEP density structures if and only if the density is > 0, but preserve the already mapped structures
Test-case for issue #25910
add check for edges with null 2D and 3D curves for STEP,
for IGES problem exists only with wires, where non-invalid edge is only one, and it is not the last in wire(fixed).
Test case for issue CR25843
OpenGl_Caps::contextCompatible - new option to request compatibility/core OpenGL profile.
OpenGl_Window - request core profile when requested (WGL and Cocoa).
OpenGl_Context::CheckExtension() - retrieve extensions using glGetStringi().
OpenGl_Context::init() - set backward-compatible functions to NULL within core profile:
core11, core15, core20, core32back, core33back, core41back, core42back, core43back, core44back.
OpenGl_Context::BindDefaultVao() - create default VAO required for core profile.
OpenGl_Context::ReadGlVersion() - make method public.
OpenGl_ShaderManager - create programs using GLSL version 150 when available.
OpenGl_VertexBuffer, OpenGl_ShaderProgram, OpenGl_ShaderObject - use
functions set from core profile instead of compatibility.
TKOpenGl - escape deprecated functionality with runtime checks.
Command vcaps - add option -compatibleProfile to request core/compatibility profile.
NIS_View - prevenr rendering within Core profile (unsupported).
Test case for issue CR25854
Aspect_GraphicCallbackStruct::IsCoreProfile - add new field to the struct for NIS
1. "HilightDrawer" were added to SelectMgr_SelectableObject.
2. Static drawer in StdSelect_Shape was replaced by class member. It's value is taken from special HilightDrawer of Selectable() object.
3. Computed relative deflection is stored as absolute deflection to be used for sub-shapes.
4. The ColoredShape object was updated to use for sub-shapes relative deflection computed for main shape.
5. Test case was added.
Tuning of test-case bug25532
Changes:
class IntTools_FaceFace
- method:
void IntTools_FaceFace::Perform(const TopoDS_Face& aF1,
const TopoDS_Face& aF2)
The treatment of infinite planes was corrected.
Test case for issue CR25818
Handling of trimmed analytical surfaces added in extrema PS.
New draw-command and test case for issue CR25861
Correction of test case for issue CR25861
Recalculate of tolerance before edge cutting
Test case for issue CR25013
add try to increase tolerance before splitting in singularity during PCurve adding.
Correction of test cases for issue CR25013
Add new flag IsAutoTriangulated to Prs3d_Drawer. It is True by default.
If this flag is True automatic re-triangulation with deflection-check logic will be applied.
Else this feature will be disable and triangulation is expected to be computed by application itself.
Change the syntax of vdefalts command.
Add new parameter -autoTriang for check of AutoTriangulated functionality.
Adjust camera position in test case bugs/xde/bug23969
I. New features:
No new features.
II. Changes:
II.1. class BOPAlgo_PaveFiller
- method:
void BOPAlgo_PaveFiller::PerformEE()
has been changed.
Intended set of VE interferences has been refined
to avoid unwanted overlaps of pave blocks
- method:
void BOPAlgo_PaveFiller::ForceInterfVE(const Standard_Integer nV,
Handle(BOPDS_PaveBlock)& aPB,
BOPDS_MapOfPaveBlock& aMPBToUpdate)
The initialization of increment of VE interferences has been added.
- method:
Standard_Boolean BOPAlgo_PaveFiller::ForceInterfVF
(const Standard_Integer nV,
const Standard_Integer nF)
The initialization of increment of VF interferences has been added.
III. Modified entities:
packages:
BOPAlgo
Test case for issue CR25847
Usage of Projlib added in case of uneven points distribution.
Test cases are updated to the new behavior.
Test cases for issue CR17129
Correction of test case for issue CR17129
Handling of degenerated parametrization (like sphere) added in IWalker.
Minor corrections.
Test case for issue CR25842
Correction of test case for issue CR25842
If Walking-lines are coincided we kept line, which contains more points or has more length (because it is more precisely, most likely).
Test cases for issue CR25828
Some test cases were changed
AIS_ColoredShape::Compute() - improve logic to split input shape into Closed and Open volumes
with back-face culling enabled when possible.
Change last argument of method StdPrs_ShadedShape::Add() from boolean to enumeration StdPrs_Volume
which controls parsing of Closed/Open volumes within input shape.
Make method StdPrs_ShadedShape::ExploreSolids() public.
Extend Draw Harness command vaspects with option -setvisibility to hide subshape (using AIS_ColoredShape).
Add new test cases bugs/bis/bug25687_1 and bugs/bis/bug25687_2.
the logic of bindSubShapes method clarified
Conflicts:
src/AIS/AIS_ColoredShape.cxx
AIS_ColoredShape::dispatchColors considers the colors of displayed shapes in connection with specific priority
the color of specific shape can be exported from several ways: the color of this shape, the color of a compound containing this shape. The highest priority has the color of shape than the one of the compound. The color with highest priority will be displayed.
This patch accounts for the highest priority of the shape color.
For example: w - wire has GREEN color; e - edge has RED color; "w" contains "e"; all edges of "w" will be displayed in GREEN color except "e" edge, it will be displayed in RED color
Added sample generating model of Intel i7-4790 CPU on which the problem can be reproduced
1. bugs modalg_4 bug697_2 bug697_4 bug697_7 bug697_8 - unstable test cases after fix 25735
Its will be checked and modified during work with performance (issue 24232).
2. bugs mesh bug25364 was tuned for 64-bit Windows.
3. de step_1 ZQ2 fails (64-bit only). Issue 25848 was registered.
4. de step_3 D8 shows improvement (no checkape error) in 64-bit only, this is after 22598 and issue 25797 was registered for that.
5. draft angle G8 improvement (algorithm produces some shape, but fails on checkshape).
6. perf ncollection A1 was tuned for 64-bit Windows.
7. de step_1 R9 - update reference data (according to 25176)
1. class BOPAlgo_PaveFiller
method void BOPAlgo_PaveFiller::PerformEF()
Do not create intersection vertices in case if it lies ON the boundary of the face.
2. class IntTools_Context
New method
Standard_Boolean IntTools_Context::IsPointInFace
(const gp_Pnt& aP,
const TopoDS_Face& aF,
const Standard_Real aTol)
has been implemented to check if the point IN the face.
3. class IntTools_EdgeFace
method
void IntTools_EdgeEdge::FindBestSolution(const Standard_Real aT11,
const Standard_Real aT12,
const Standard_Real aT21,
const Standard_Real aT22,
Standard_Real& aT1,
Standard_Real& aT2)
Treatment of the touching cases.
Test cases for issue CR24646
Correction of test cases for issue CR24646
Update documentat if the class.
SetColor() and SetLabel() now work with 0-based index.
SetColor() now checks length of myColors.
Remove methods GetCurrentColor() and GetCurrentLabel().
Methods GetColor() and GetLabel() now can be used to get user-specified and default colors / labels.
Round down IntervNumber in FindColor().
DrawScale() - show labels even for one interval.
Redesign Draw Harness command vcolorscale, provide new options.
Update test cases which use vcolorscale command.
The number of points to divide the edge curve on a segments to compute a
boundary box does not provide a good tolerance. So a resultant boundary
box has an incorrect bounds. As a result the intersection near to a
tangent of curve does not detected.
Test case for issue CR25823
Changes:
class BOPTools_AlgoTools
method:
Standard_Boolean BOPTools_AlgoTools::GetFaceOff
(const TopoDS_Edge& theE1,
const TopoDS_Face& theF1,
BOPTools_ListOfCoupleOfShape& theLCSOff,
TopoDS_Face& theFOff,
Handle(IntTools_Context)& theContext)
has been changed.
The comparison of the angles done with the angular tolerance value
Test case for issue CR25838
1. Algorithm of adjusting parameter to the surface boundaries has been changed.
2. Control First and Last parameters in BRepLib_CheckCurveOnSurface::Compute() function.
Test cases for issue CR25819
Test cases save results in directory pointed by ${imagedir} Tcl variable. File names are initialized in scripts and passed to DRAW command as argument.
Tests User Guide was updated.
Remarks were corrected
