1. DRAW-commands for curve/surface continuity returning were changed.
2. Output of "distmini" DRAW-command is amended.
3. Function MinMax() was moved from Standard_Real to IntPatch_ImpImpIntersection_4.gxx.
4. Incorrect computing of nbcurveC1 in Geom2dConvert::C0BSplineToC1BSplineCurve(...) function was liquidated.
Test cases were changed.
class BOPAlgo_Builder
method
void BOPAlgo_Builder::FillIn3DParts
(BOPCol_DataMapOfShapeListOfShape& theInParts,
BOPCol_DataMapOfShapeShape& theDraftSolids,
const BOPCol_BaseAllocator&)
Sort faces before its classification relatively to the solid.
Test cases for issue CR25319
Correction of test cases for issue CR25319
class BOPDS_DS
method:
void BOPDS_DS::InitPaveBlocks(const Standard_Integer theI)
Correct treatment of internal edges.
Test cases for the issue.
Correction of test cases for issue CR25245
Changes:
class BOPTools_AlgoTools2D
method:
void BOPTools_AlgoTools2D::AdjustPCurveOnFace
(const TopoDS_Face& aF,
const Standard_Real aFirst,
const Standard_Real aLast,
const Handle(Geom2d_Curve)& aC2D,
Handle(Geom2d_Curve)& aC2DA)
The adjustment value for 2D curve has been calrified with precision value in parametric space
Test case for issue CR25285
Changes:
class BOPDS_DS
method:
void BOPDS_DS::InitPaveBlocks(const Standard_Integer theI)
The treatment of internal edges has been added.
Test case for issue CR25263
Purpose:
The algorithm is to build solids from set of shapes.
It uses the BOPAlgo_Builder algorithm to intersect the given shapes and build the images
of faces (if needed) and BOPAlgo_BuilderSolid algorithm to build the solids.
Steps of the algorithm:
1. Collect all faces: intersect the shapes if necessary and collect the images of faces,
otherwise just collect the faces to the <myFaces> list.
All faces on this step added twice, with orientation FORWARD and REVERSED;
2. Create bounding box covering all the faces from <myFaces> and create solid box from corner points
of that bounding box (myBBox, mySBox). Add faces from that box to <myFaces>;
3. Build solids using faces from <myFaces> using BOPAlgo_BuilderSolid algorithm;
4. Treat the result: Eliminate solid containig faces from <mySBox>;
5. Fill internal shapes: add internal vertices and edges into created solids;
6. Prepare the history.
Fix for regression.
class BOPAlgo_BuilderSolid:
The tolerance value used in BRepClass3d_SolidClassifier has been increased.
Test cases for issue CR25232
Small correction to eliminate the warning.
1. Method "SetValues()" for gp_Trsf2d class is added.
2. Method Orthogonalize for gp_Trsf2d and gp_Trsf classes was added.
3. Unused arguments from "SetValues()" method for gp_Trsf was deleted.
4. Output of AppParCurves_MultiPoint Dump was corrected.
5. Method of right projected point choosing was corrected in ProjLib package.
6. Some test cases were changed according to their new behavior.
Modifications in Edge/Edge intersection algorithm:
1. Condition to create common part of type TopAbs_EDGE is changed.
2. Correct treatment of closed edges.
Small correction to eliminate warning.
Test case for issue #25237
1. class BOPDS_Iterator
method:
void BOPDS_Iterator::Intersect()
The ttreatment of solid/* interferences has been added.
2 class BOPAlgo_PaveFiller
protected methods:
void BOPAlgo_PaveFiller::PerformVZ()
void BOPAlgo_PaveFiller::PerformEZ()
void BOPAlgo_PaveFiller::PerformFZ()
void BOPAlgo_PaveFiller::PerformZZ()
has been added.
The methods are to Compute
Vertex/Solid
Edge/Solid
Face/Solid
Solid/Solid
interferences.
3. class BOPAlgo_PaveFiller
protected method:
void BOPAlgo_PaveFiller::PerformFF()
Empty interferences has not been added in the interferences' table
4. class BOPAlgo_CheckerSI
protected methods:
void BOPAlgo_CheckerSI::PerformVZ()
void BOPAlgo_CheckerSI:PerformEZ()
void BOPAlgo_CheckerSI::PerformFZ()
void BOPAlgo_CheckerSI::PerformZZ()
has been removed.
5. class BOPAlgo_BOP
protected method:
void BOPAlgo_BOP::BuildRC()
void BOPAlgo_BOP::BuildSolid()
changed to treat non-interferred solids and keep it in the result as they were
Test case for issue #25242
Changes:
class BOPTools_AlgoTools3D
method:
void BOPTools_AlgoTools3D::DoSplitSEAMOnFace
(const TopoDS_Edge& aSplit,
const TopoDS_Face& aF)
The treatment of seam edges for the periodic surfaces has been changed.
Test case for issue CR25228
Existing method of Cylinder-Cylinder intersection computing is based on finding the analytic line (as a function of one argument) and converting one into the walking-line with set of equidistant (along the line parameter) points.
The main advantage of applied method is using adaptively computed step. Necessary step is computed into every point of the obtained walking-line. At that we receive final walking-line directly (without preliminary analytic line) and we determine moments more precisely, when it should be split (see IntPatch_ImpImpIntersection_4.gxx).
The main disadvantages is bad working this method for non-trimmed cylinders (with infinite bounds), because step value is depend on the boundaries values.
More over, new method always returns walking-line, while intersection result can be an analytic curve (lines, circle, ellipse). That is NO good. Therefore, analytic curve is computed by existing method.
In conclusion, in spite of covering almost all more often meeting cases, new method has limited application. Then we should use the existing old method.
Additionally, method MinMax() is added (see Standard_Real.hxx file). It uses into new algorithm.
Some test cases is changed according to their new behavior.
Test case for issue CR24915 is added.
Into GeometryTest_APICommands.cxx only tabulations were chaged.
"Extending" of isolines (see Geom2dHatch_Hatcher.cxx).
Small correction of test case for issue CR24915.
Since there is a possibility to run the check on self-intersection (BOPAlgo_CheckerSI algorithm) in non-destructive mode (source shape will not be modified)
there is no need to make copies of the arguments of BRepAlgoAPI_Check.
Test case added
Changes:
class BOPAlgo_WireSplitter
static function:
Standard_Boolean RefineAngle2D(const TopoDS_Vertex& aV,
const TopoDS_Edge& aE,
const TopoDS_Face& myFace,
const Standard_Real aA1,
const Standard_Real aA2,
Standard_Real& aA)
The contents of Domain 2D for the straight line has been changed.
class BOPTools_AlgoTools2D
method:
void BOPTools_AlgoTools2D::AdjustPCurveOnFace
(const TopoDS_Face& aF,
const Standard_Real aFirst,
const Standard_Real aLast,
const Handle(Geom2d_Curve)& aC2D,
Handle(Geom2d_Curve)& aC2DA)
The treatment of cylindrical surfaces has been changed taking into account
existing values of tolerances of the edges.
Test cases for issue CR25163
class BOPTools_AlgoTools
method
Standard_Boolean BOPTools_AlgoTools::IsSplitToReverse
(const TopoDS_Face& theFSp,
const TopoDS_Face& theFSr,
Handle(IntTools_Context)& theContext)
Reverse normal direction for REVERSED faces.
Test case for issue CR25127
class IntTools_FaceFace
method
static Standard_Boolean DecompositionOfWLine(const Handle(IntPatch_WLine)& theWLine,
const Handle(GeomAdaptor_HSurface)& theSurface1,
const Handle(GeomAdaptor_HSurface)& theSurface2,
const TopoDS_Face& theFace1,
const TopoDS_Face& theFace2,
const IntTools_LineConstructor& theLConstructor,
const Standard_Boolean theAvoidLConstructor,
IntPatch_SequenceOfLine& theNewLines,
Standard_Real& theReachedTol3d,
const Handle(IntTools_Context)& aContext)
Correct treatment of WLines with only one point before or after the boundary point.
Test case for issue CR25002
class IntTools_FaceFace
method
void IntTools_FaceFace::Perform(const TopoDS_Face& aF1,
const TopoDS_Face& aF2)
Change the approximation flags according to the order of faces.
Test case for issue CR25019
