The Face/Face intersection procedure has been changed in Boolean Operations algorithm.
Previously, the intersection tolerance for all section curves between pair of faces has been calculated
as the maximal tolerance among all curves. Now, each curve has its own valid tolerance calculated
as the maximal deviation of the 3D curve from its 2D curves on faces or surfaces in case there are no 2D curves.
Thus, such methods of IntTools_FaceFace algorithm as TolReached3d(), TolReal() and TolReached2d() have been removed.
Now the tolerances of the curve can be obtained from the curve itself (IntTools_Curve - result of intersection):
- IntTools_Curve::Tolerance() - returns the valid tolerance for the curve;
- IntTools_Curve::TangentialTolerance() - returns the tangential tolerance, which depends on the size of the common
between faces. Currently, this tolerance is computed for Plane/Plane cases only. For other case, the value
of the tangential tolerance is the maximal tolerance of faces.
2D intersection tolerance (IntTools_FaceFace::TolReached2d()) has been completely removed from the algorithm as unused.
When fuzzy option is in force prevent increasing tolerance of input shapes. Instead pass increased by fuzzy value the tolerances of sub-shapes everywhere where it is needed by intersection algorithms.
The following changes in API have been made:
- The methods SetFuzzyValue and FuzzyValue have been moved from the classes BOPAlgo_ArgumentAnalyzer, BOPAlgo_Builder, and BOPAlgo_PaveFiller to the base class BOPAlgo_Algo.
- The public method BOPDS_DS::VerticesOnIn has been renamed to SubShapesOnIn, and the new output parameter theCommonPB has been added.
- In BOPTools_AlgoTools, a new argument "theFuzzyValue" has been added in the methods ComputeVV and AreFacesSameDomain.
- In IntTools_Context, a new argument "theFuzzyValue" has been added in the methods ComputeVE and ComputeVF.
- The methods SetFuzzyValue and FuzzyValue have been added in the classes IntTools_EdgeEdge, IntTools_FaceFace.
- In the class IntTools_EdgeFace, the methods SetTolE, SetTolF, TolE, TolF have been removed, and the methods SetFuzzyValue, FuzzyValue have been added.
- The new argument "theTol" has been added in the method IntTools_WLineTool::DecompositionOfWLine.
Some improvements in algorithms have been made during fighting with regressions:
- Correct initialization of pave blocks for degenerated edges.
- In BOPAlgo_PaveFiller::MakeBlocks(), filter out paves on intersection curve that were put on the curve accidentally due to wide range of E-F intersection vertex.
- In the method IntTools_Tools::ComputeTolerance the margin added to the computed tolerance has been increased up to 0.001%.
- The method BOPAlgo_PaveFiller::PutPaveOnCurve has been corrected in order to use the original vertex tolerance instead of the value increased during putting it on other curves.
- The new method BOPDS_PaveBlock::RemoveExtPave has been added.
- The vertex tolerance computation in BOPTools_AlgoTools::CorrectCurveOnSurface has been improved, taking into account intersection segments between p-curves (to avoid regression on "bugs modalg_6 bug22794").
- Improve IsExistingPaveBlock to make more stable catching of coincidence of common block with section curve (against regression "bugs modalg_4 bug697_2" on Linux).
Test case for the bug has been added.
The following test cases have been updated as improvements:
boolean gdml_private ZH2 ZI7 ZJ7
boolean volumemaker C4
The test case bugs/modalg_4/pro19653 has been corrected to make it stable. See comment inside the script for details.
The test case bugs/modalg_6/bug25880 has been corrected to suppress wrong bfuse commands.
The test bugs/modalg_6/bug26954_3 has been corrected to compare the result with more precise reference value.
The "faulty" TODO in boolean/volumemaker/A8 has been made actual for Linux as well.
//Eliminate compilation error on Linux.
The root of the problem is incorrect processing of cases when intersection line goes through the apex(es) of sphere. The fix improves this situation. The algorithm is taken from DecomposeResult(...) function (see IntPatch_ImpPrmIntersection.cxx file). Before the fix, faltering steps were done to solve this problem. As result, it worked in some particular cases. Now, its possibilities have been extended significantly.
Following changes have been made in the fix:
1. Class IntPatch_ALineToWLine has been rewritten cardinally. It touches as interfaces of existing methods as adding/removing some methods/fields. Correction touches both cases: going through seam of Cone/Sphere and through pole(s) of sphere. Old interface did not allow making some actions with analytical line (ALine), e.g. splitting it on several Walking-lines (WLine).
2. Restriction-line support has been removed from Implicit-Implicit intersection result (see IntPatch_Intersection::GeomGeomPerfom(...) method). It connects with the fact that the intersection algorithm itself returns precise intersection line in analytical cases (in compare with parametric intersector). Therefore, we do not need in additional (restriction) line.
3. New class IntPatch_SpecialPoints has been added. This class contains methods to add some special points (such as apex of cone, pole of sphere, point on surface boundary etc.) in intersection line (IntPatch_PointLine). It is based on the static functions, which already exist in IntPatch_ImpPrmIntersection.cxx file (these functions have been moved to the new class).
4. Method IntPatch_WLineTool::ExtendTwoWlinesToEachOther(...) has been renamed to IntPatch_WLineTool::ExtendTwoWLines(...). It is connected with changing main idea of the method. Now it allows extending WLine to the surface boundary or to the singular point (if it is possible): cone apex, sphere pole etc. Interface of this method has been corrected, too. At that, old functionality (extending to each other) has been kept. For implementation of this algorithm, new enumeration "IntPatchWT_WLsConnectionType" has been created.
5. Method IntPatch_PointLine::CurvatureRadiusOfIntersLine(...) has been added. See IntPatch_PointLine.hxx for detail information. It allows correct step computing depended on the local curvature of the intersection line. This method uses geometrical properties of intersected surfaces to compute local curvature. Therefore, it can be applied in wide range of cases even if the intersection curve is not represented in explicit form (e.g. in case of param-param-intersection).
6. Method IntSurf::SetPeriod(...) has been created.
7. Additional check has been added in Draft_Modification::Perform() method for better choice of correct fragment of intersection line for processing DRAFT operation.
8. New overload method IntPatch_Point::SetValue() has been added.
9. Some refactoring of the code has been made.
Creation of test case for issue #27431.
---------------------------------------------------------------------------------------------
Some test cases have been adjusted according to their new behavior.
tests\bugs\modalg_4\bug62
It is really IMPROVEMENT (but fortuitous).
tests\bugs\modalg_5\bug25838
The behavior of this test has been reverted to the state before fixing the issue #27341. Main problem has not been fixed in #27341. It was fortuitous improvement.
tests\bugs\moddata_2\bug565
Quality of intersection curve was not checked. And the curve is bad on both MASTER and FIX. Input data are really wrong: plane-like-cone. However, on the MASTER, four intersection curves (the quality is insignificant) are expected. On the fix, not empty intersection result is expected simply.
tests\boolean\volumemaker\A8
Differences in images and CPU is expected. Difference in images is expected to be fixed in the issue #26020. Now, we should apply this behavior.
Much CPU time is spent by IntTools_FaceFace::ComputeTolReached3d(...) and GeomInt_IntSS::BuildPCurves(...) methods calling. These methods are not touched by the algorithm. It is the result of change of intersection curve(s) form. However, the new Curve(s) seems to be valid and can be applied. As result, new behavior can be applied, too.
tests\boolean\volumemaker\F8
tests\boolean\volumemaker\F9
tests\boolean\volumemaker\G5
tests\boolean\volumemaker\G6
CPU difference is expected. Much CPU time is spent by IntPatch_PointLine::CurvatureRadiusOfIntersLine(...) method calling. This method is really new (it does not exist on the MASTER) and is really useful. Therefore, we should apply new behavior.
tests\boolean\volumemaker\G1
CPU difference is expected. Much CPU time is spent by IntTools_WLineTool::DecompositionOfWLine(...) and IntTools_FaceFace::ComputeTolReached3d(...) methods calling. These methods are not touched by the algorithm. It is the result of change of intersection curve(s) form. However, the new Curve(s) seems to be valid and can be applied. As result, new behavior can be applied, too.
tests\bugs\modalg_6\bug26619
Differences in images is expected. The test keeps its BAD status on the FIX. But the result on the fix is nearer to expected than on the MASTER. Issue #27014 is still actual. As before, it is not clear, why the number of entities is different. The number of section curves has not been changed. Interfered entities are the same as on the MASTER.
tests\bugs\modalg_5\bug25319_1(2)
The reason is described in the issue #27896.
Small correction in the test case
1. Check, if value found by math_PSO algorithm cannot be precised by math_NewtonMinimum algorithm. In this case, we call math_PSO algorithm repeatedly, however, with other parameters.
2. Some margin of edge tolerance value has been provided in IntTools_Tools class.
3. Interface of math_NewtonMinimum class has been changed (method GetStatus() has been added).
Correction of some test cases according to their new behavior.
1. Check, if edge is same-range, is now made with some tolerance (not strictly) in GeomLib_CheckCurveOnSurface class. Default value of this tolerance is Precision::PConfusion(). However, this value can be changed with corresponding interface.
2. DRAW-command "attachpcurve" has been added to BOPTest_UtilityCommands.cxx file. This command creates p-curve of given edge on given face. It can assign 2D-curve of one of the edge already included in the face or (if it is not possible) rebuilds new 2D-curve.
Creation of test case for this issue.
Adjusting test case boolean volumemaker A8 according to its new behavior on Windows.
0026796: The result of General Fuse operation is self-intersecting shape
The fix forces creation of new sub-shapes (vertex, edge) when the tolerance of some sub-shape of an argument is to be increased.
This new behavior is turned off by default. It can be turned on using two ways:
1) Setting 'locking' flag of the arguments.
2) Calling the method SetNonDestructive(Standard_True) of the API classes.
Various bug fixes in the algorithm:
- Compute correct tolerance values for intersections of type Line/Line, Line/Plane, Plane/Plane.
- In case of Line/Plane intersection check if line's vertices lie on the plane.
- Do not allow decreasing of the tolerance value of the Line/Line intersection vertex.
- In IntTools_EdgeEdge, call the method FindParameters with proper 3D tolerance of the curve.
- Force making copy of a degenerated edge if its vertex is touched but no 2D intersection with other curves is found.
- Remove pave blocks both ends of which became referring to the same vertex after vertices substitution.
- Avoid exception in IntTools_Context::IsVertexOnLine if Extrema is not done.
- Reduce tolerance of vertex/edge using actual distances to interfered shapes if it was increased due to line/line, line/plane, or plane/plane small intersection angle.
- Update tolerance of edges to reach all representations in a common block.
- In V-E intersections, check if a vertex hits beyond shrunk range, in such case create V-V interference.
- Do not put a section edge to the result if it becomes to be a micro edge after updating its vertex.
- Correctly make vertices same-domain during the work of MakeBlocks.
- Decrease shrunk range at least on a Precision::Confusion() in addition to vertex tolerance.
- Add Confusion to bounding boxes of new shapes in DS
- Add tolerance Precision::Confusion() to compare distances of touching cases to fix regressions.
TODO marks have been removed from (or modified in) the following test cases (Improvements):
boolean bsection M3 N2 R2
boolean gdml_private B6 C2 C6 G7 I6 F6 J1 J4 M7 N1 N8 N9 O3 O4 O6 O8 O9 P1 P2 P5 Q1 Q3 Q5 S9 T2 U4 U5 U9 ZB5 ZB6 ZC1 ZC5 ZD3 ZD6 ZD7 ZH2 ZH5 ZI2 ZI5 ZI7 ZI9 ZJ3 ZJ4 ZJ7 F8 I6 G1
boolean volumemaker A5 A6 B3 B4 B7 B9 D3 D4 D7 F1
boolean bopcut_2d D5
bugs modalg_5 bug25043
bugs modalg_2 bug472_1 bug472_2 bug472_3
Test cases updated because they are still bad but can be accepted as non-regression:
boolean volumemaker C4 A3 A7 E6
bugs modalg_1 bug10232
boolean bsection N2
Put new TODO in the scripts:
bugs modalg_5 bug25232_9
bugs modalg_6 bug26619
bugs modalg_1 buc60462_2
bugs modalg_4 bug772
For the following tests the result in fix became better, so take fix result as the reference:
bugs modalg_5 bug24628
bugs modalg_6 bug26954_3
boolean volumemaker A4 B5 B6 C3 C8 D2 D5 F2
bugs modalg_2 bug472_2
bugs modalg_1 buc60776_1
- Add the method SetNonDestructive to API classes of user level
1. Inline methods have been moved to hxx-file.
2. Geometric part of BRepLib_CheckCurveOnSurface has been moved to GeomLib_CheckCurveOnSurface.
Move try/catch treatment to low level (from BRepLib_CheckCurveOnSurface to GeomLib_CheckCurveOnSurface).
Automatic upgrade of OCCT code by command "occt_upgrade . -nocdl":
- WOK-generated header files from inc and sources from drv are moved to src
- CDL files removed
- All packages are converted to nocdlpack
1. The tool of computing the max distance between 3D curve and its 2d representation on the face
has been moved from static methods in BOPTools_AlgoTools class to BRepLib_CheckCurveOnSurface class.
2. The tools has been applied to 2d curves built during Boolean Operation
and to some intersection curves.
3. The functions
Standard_Boolean BOPTools_AlgoTools::ComputeTolerance
(const TopoDS_Face& theFace,
const TopoDS_Edge& theEdge,
Standard_Real& theMaxDist,
Standard_Real& theMaxPar)
and
Standard_Boolean IntTools_Tools::ComputeTolerance
(const Handle(Geom_Curve)& theCurve3D,
const Handle(Geom2d_Curve)& theCurve2D,
const Handle(Geom_Surface)& theSurf,
const Standard_Real theFirst,
const Standard_Real theLast,
Standard_Real& theMaxDist,
Standard_Real& theMaxPar)
have been developed for easy access to BRepLib_CheckCurveOnSurface functionality.
class IntTools_FaceFace
method void IntTools_FaceFace::ComputeTolReached3d()
Case for Plane/BSpline intersection added for treatment.
Test case for issue CR25597
Fix for regression boolean bsection N7.
class BOPAlgo_PaveFiller
method
void BOPAlgo_PaveFiller::UpdateFaceInfo
(BOPDS_DataMapOfPaveBlockListOfPaveBlock& theDME,
const BOPCol_DataMapOfIntegerInteger& theDMV)
Updating Face Info information with new vertices created in PostTreatFF.
Correction boolean/bsection/N2
Updated test cases.
class IntTools_Tools
method
Standard_Boolean IntTools_Tools::AdjustPeriodic
(const Standard_Real thePar,
const Standard_Real theParMin,
const Standard_Real theParMax,
const Standard_Real thePeriod,
Standard_Real &theNewPar,
Standard_Real &theOffset,
const Standard_Real theEps)
The new function has been implemented for fast adjustment of pcurves to the range of surface.
Test case correction for issue CR24981
Classes BOPInt_Context, BOPInt_ShrunkRange, BOPInt_Tools have been removed.
Package BOPInt has been removed
Classes IntTools_Context, IntTools_ShrunkRange have been added to replace corresponding BOPInt_ classes.
The classes provide same functionality as corresponding BOPInt_ classes.
Classes :
BOPAlgo_ArgumentAnalyzer
BOPAlgo_Builder
BOPAlgo_BuilderArea
BOPAlgo_BuilderFace
BOPAlgo_BuilderSolid
BOPAlgo_CheckerSI
BOPAlgo_PaveFiller
BOPAlgo_ShellSplitter
BOPTools_AlgoTools3D
BRepFill_TrimShellCorner
IntTools_BeanFaceIntersector
IntTools_EdgeFace
IntTools_FaceFace
IntTools_Tools
have been modified to use new classes IntTools_Context IntTools_ShrunkRange
Class IntTools_Tools has been modofied to provide the functionality that was in BOPInt_Tools.
License statement text corrected; compiler warnings caused by Bison 2.41 disabled for MSVC; a few other compiler warnings on 54-bit Windows eliminated by appropriate type cast
Wrong license statements corrected in several files.
Copyright and license statements added in XSD and GLSL files.
Copyright year updated in some files.
Obsolete documentation files removed from DrawResources.
