Modifications:
1. class BOPTools_AlgoTools
1.1. method
Standard_Boolean BOPTools_AlgoTools::ComputeTolerance
(const Handle(Geom_Curve)& theCurve3D,
const Handle(Geom2d_Curve)& theCurve2D,
const Handle(Geom_Surface)& theSurf,
const Standard_Real theFirst,
const Standard_Real theLast,
Standard_Real& theMaxDist,
Standard_Real& theMaxPar)
It computes the max distance between points taken from 3D and 2D curves by the same parameter
1.2. method
Standard_Boolean BOPTools_AlgoTools::ComputeTolerance
(const TopoDS_Face& theFace,
const TopoDS_Edge& theEdge,
Standard_Real& theMaxDist,
Standard_Real& theParameter)
Computes the valid value of the tolerance for the edge using the function above.
2. Added possibility to check shape on the validity of the curves on the surfaces.
2.1. New status BOPAlgo_InvalidCurveOnSurface has been added to the enumeration BOPAlgo_CheckStatus
2.2. class BOPAlgo_ArgumentAnalyzer
method
void BOPAlgo_ArgumentAnalyzer::TestCurveOnSurface()
It checks each edge/face pair in the shape using the method ComputeTolerance from BOPTools_AlgoTools and stores invalid pairs to myResults.
Invalid pairs are those which contain the edge with tolerance value less then the value computed by the ComputeTolerance method.
2.3. class BOPAlgo_CheckResult
Added new fields:
myMaxDist1 : Real from Standard;
myMaxDist2 : Real from Standard;
myMaxPar1 : Real from Standard;
myMaxPar2 : Real from Standard;
and corresponding setters and getters.
These fields are used to store the results of the TestCurveOnSurface() check.
3. Added new option to the bopargcheck command and two new commands.
class BOPTest_CheckCommands
3.1. command bopargcheck
As it is using the BOPAlgo_ArgumentAnalyzer class to check the shapes
it checks also the validity of the curves on the surfaces.
The output for the invalid shapes is following:
Draw[]> bopargcheck b2 /ic #f
Made faulty shape: s1COnS_1 (MaxDist = 0.0013334343378738308, MaxPar = 0.02884285498274167)
Made faulty shape: s1COnS_2 (MaxDist = 0.0013334340648766174, MaxPar = 0.02884285497934707)
Made faulty shape: s1COnS_3 (MaxDist = 0.0013335086668628978, MaxPar = 1.4133051942712607)
Made faulty shape: s1COnS_4 (MaxDist = 0.0013335086525838983, MaxPar = 1.4133051942713901)
Faulties for FIRST shape found : 4
---------------------------------
Shapes are not suppotrted by BOP: NO
Self-Intersections : NO
Check for SI has been aborted : NO
Too small edges : NO
Bad faces : NO
Too close vertices : NO
Too close edges : NO
Shapes with Continuity C0 : NO
Invalid Curve on Surface : YES Cases(4) Total shapes(8)
Faulties for SECOND shape found : 0
The compounds s1COnS_* contain pair of edge and face.
MaxDist is maximal distance between points taken from 3D curve of the edge and 2D curve of that edge on the face.
MaxPar is a parameter in which the MaxDist is reached.
To disable this check it is necessary to use option /S (bopargcheck shape /S).
3.2. command xdistef
Usage of the command:
xdistef edge face
It computes distance between points taken from 3D curve of the edge and 2D curve of that edge on the face.
Example:
Draw[]> explode s1COnS_1
s1COnS_1_1 s1COnS_1_2
Draw[]> whatis s1COnS_1_1
s1COnS_1_1 is a shape EDGE FORWARD Modified Orientable
Draw[]> whatis s1COnS_1_2
s1COnS_1_2 is a shape FACE FORWARD Modified Orientable
Draw[]> xdistef s1COnS_1_1 s1COnS_1_2
Max Distance = 0.0013334343378738308; Parameter on curve = 0.02884285498274167
3.3. command checkcurveonsurf
Usage of the command:
checkcurveonsurf shape.
It checks each edge/face pair in the shape using the method ComputeTolerance from BOPTools_AlgoTools.
Example:
Draw[]> checkcurveonsurf b2
Invalid curves on surface:
edge e_0 on face f_0 (max dist: 0.0013334343378738, parameter on curve: 0.0288428549827417)
edge e_1 on face f_0 (max dist: 0.0013334340648766, parameter on curve: 0.0288428549793471)
edge e_2 on face f_1 (max dist: 0.0013335086668629, parameter on curve: 1.4133051942712607)
edge e_3 on face f_1 (max dist: 0.0013335086525839, parameter on curve: 1.4133051942713901)
Sugestions to fix the shape:
explode b2 e;
settolerance b2_6 0.0013335086668629;
settolerance b2_7 0.0013334343378738;
settolerance b2_8 0.0013334340648766;
settolerance b2_10 0.0013335086525839;
The command gives suggestions to fix the shape by increasing tolerance values of the invalid edges.
In some cases the tolerance values suggested by the tool can be very large.
Such values should be used very carefully, because setting large tolerance values to the sub-shapes
of the shape can make it non valid (self-interfered) or lead to unexpected result when using
such shapes in some operations (boolean for example).
Test case for issue CR25410
class IntTools_EdgeEdge
method
void IntTools_EdgeEdge::FindSolutions(const IntTools_Range& theR1,
const IntTools_Range& theR2,
const Bnd_Box& theBox2,
IntTools_SequenceOfRanges& theRanges1,
IntTools_SequenceOfRanges& theRanges2)
Looking for the solutions of the intersection between edges with greater precision.
Test cases for the issue.
An improved RWSTL::ReadFile() method + a draw-command returning the number of nodes and triangles for a MeshVS_Mesh object based on STL mesh data source.
An indexed map of points is replaced by a CellFilter of XYZ objects already implemented in BRepBuilderAPI.
Also, BRepBuilderAPI_VertexInspector became exported for TKTopAlgo library (Standard_EXPORT is added for the methods of this class).
Standard_EXPORT is removed for in-line methods of BRepBuilderAPI_VertexInspector
Test-case for issue #25405
Update of test-cases, according to new behavior
Changed next point computation in IntWalk_PWalker.cxx.
Now trying to walk over another isoline if new point is too close to previous.
Test case for issue CR25380
- BVH tree in the target Z layer was not updated when OpenGl_Structure
was moved to another Z layer.
- vpriority DRAW command added to test how BVH tree is updated when
display priority is changed
- Test case for Z layers and display priorities added
Handle -noupdate argument within vpriority command
Changes:
class BOPTools_AlgoTools2D
method:
void BOPTools_AlgoTools2D::AdjustPCurveOnFace
(const TopoDS_Face& aF,
const Standard_Real aFirst,
const Standard_Real aLast,
const Handle(Geom2d_Curve)& aC2D,
Handle(Geom2d_Curve)& aC2DA)
The location of 2D-curve is adjusted to face boubaries if necessary
using the precision value in parametric space
Unnecessary comments are removed
Test case for issue CR25408
Improved output of Xdump command using Draw_Interpretor.
Improved output of Xdump command using Standard_SStream.
OStream is used instead of SStream.
Test cases for issue CR23911
Use NCollection_Map instead of instantiation of TCollection_Map
Test-cases for issue #25344
Correct error in test script: the shape variable assigned by the command 'restore' must not be referred by '$'.
Correct according to remarks of reviewer:
- Assign() and operator=() should implement equal approach to allocators
- Protect all collections against assignment to itself with operator=()
Test-case for issue #25348
Added method to clear outdated selection of entity owners on recompute (update) of selection.
Added test case to check selection behavior in local context.
Cosmetic corrections
1. DRAW-commands for curve/surface continuity returning were changed.
2. Output of "distmini" DRAW-command is amended.
3. Function MinMax() was moved from Standard_Real to IntPatch_ImpImpIntersection_4.gxx.
4. Incorrect computing of nbcurveC1 in Geom2dConvert::C0BSplineToC1BSplineCurve(...) function was liquidated.
Test cases were changed.
Method IGESCAFControl_Writer::WriteNames now iterates over all nested assemblies and collects names for shapes.
Regression fix
Test-case for issue #21802
class BOPAlgo_Builder
method
void BOPAlgo_Builder::FillIn3DParts
(BOPCol_DataMapOfShapeListOfShape& theInParts,
BOPCol_DataMapOfShapeShape& theDraftSolids,
const BOPCol_BaseAllocator&)
Sort faces before its classification relatively to the solid.
Test cases for issue CR25319
Correction of test cases for issue CR25319
class BOPDS_DS
method:
void BOPDS_DS::InitPaveBlocks(const Standard_Integer theI)
Correct treatment of internal edges.
Test cases for the issue.
Correction of test cases for issue CR25245
class IntTools_ShrunkRange
method void IntTools_ShrunkRange::Perform()
Fix to avoid creation of small section edges.
Correction of test case for issue CR23753
