Test for 0023171: Got wrong result after stitching
Test for 0023612: BRepPrimAPI_MakeTorus
Test for 0023610: checkshape command does not detect mismatch of the tolerance values among the sub-shapes of the shape
Test for 0023660: 'bsection' produces result with gap
Test for 0024397: BRepBuilderAPI_Copy works not correct
Test for 0023927: BRepProj_Projection produces Edge with one Vertex outside from curve
Test for 0023902: Cannot build fillet
Test for 0023669: Error in Boolean operations algorithm: section between cylindrical face and prism is incomplete
Test for 0023660: 'bsection' produces result with gap
Test for 0024100: Bad pcurve is built on a face while converting the shape from STEP format.
Test for 0024319: Sewing makes a solid transparent
Test for 0024302: Section operation modifies input argument
Test for 0024397: BRepBuilderAPI_Copy works not correct
Test for 0024418: Wrong section curves when intersecting analytical surfaces
1. Unify the faces classification procedure of the methods BOPAlgo_BuilderSolid::PerformInternalShapes() and BOPAlgo_Builder::FillIn3DParts() using the latter as a base.
The new method BOPAlgo_Tools::ClassifyFaces() has been created for that. Both methods mentioned above have been updated to use the new one.
2. Forced intersection of the edges after enlarge of the tolerance values of their vertices during the operation has been added into BOP's intersection algorithm (BOPAlgo_PaveFiller).
BOPAlgo_Tools::PerformCommonBlocks() method has been updated to avoid loosing faces of the already created Common blocks.
As a result the case "boolean gdml_private ZF6" became more stable, because the intermediate result is no longer invalid.
Additional test cases have been added to verify this improvement (bugs modalg_7 bug29322_*)
3. When building PCurves for edges on faces, check the existing PCurves on its validity for periodic surfaces and adjust PCurves if necessary.
The improvement helps to produce the valid result in the test case "bugs moddata_1 bug152".
4. Avoid creation of empty Edge-Edge interference if the intersection point is lying close to a shared vertex.
The improvement helps obtain the valid result of the "bopcheck" operation in the test case "bugs modalg_7 bug27683".
Adjustment of the test case to current behavior:
- Avoid usage of the self-intersecting torus in the test case "boolean gdml_public A9".
- Fix the input shape in the test case "boolean bopfuse_complex H1" to provide valid result.
- Test cases "bugs moddata_1 bug152_1 bug152_2" have been unified into single test case "bugs moddata_1 bug152". Now, the case rebuilds invalid input data and performs all types of Boolean operations.
- Change the test case "bugs modalg_7 bug22750" to produce valid intermediate results used in subsequent operations as arguments.
- The following test cases are improvements:
- "boolean volumemaker D8"
- "boolean volumemaker G1"
- "bugs modalg_7 bug27683"
Make the algorithm BRepOffsetAPI_NormalProjection use section operation instead of common to get the edge-result of projection to be in face restrictions.
Correct Boolean operation algorithm to produce correctly oriented result in the case of common between face and edge.
The algorithm ShapeUpgrade_UnifySameDomain has been patched to correctly gather same domain faces in a compound.
The TCL script snowflake.tcl has been corrected to get rid of dependence on the order of edges in the result of Boolean operation.
1.The algorithm searching the section in the corner (ChooseSection) is modified to be able to find simple cases with rather big tolerance.
2. The constructor of BRepFill_Section is modified: now it removes locations in the shape of section like it was done in BRepFill_Pipe.
3. Correction of U-edges by Same Parameter has been added to the method BRepFill_Sweep::Build.
Improve performance of Boolean operations algorithm by:
- Improving the check of Same Domain faces (BOPAlgo_Builder::FillSameDomainFaces());
- Faster rejection of outer faces for solids using Bounding Box classification first (BOPAlgo_Builder::FillIn3DParts());
- Using IncAllocator for local containers.
Quality improvement has been made in BOPAlgo_PaveFiller class:
1. Method IsExistingPaveBlock() has been corrected to provide the correct edge tolerance and to obtain valid intermediate results in the test case "boolean gdml_private ZH3".
New test case have been added to verify this improvement (bugs modalg_7 bug29301).
2. Method PutClosingPaveOnCurve() has been corrected to use the tolerance of the pave put on the bound for checking curve on closeness.
Additional check for the curve to have valid range after addition of the pave on the other end has been added to prevent considering the small curves (covered by vertex tolerance) as closed ones.
As a result of this modification the test case boolean gdml_public B2 has been fixed (TODO removed).
Adjustment of the test cases to current behavior:
- boolean bopcommon_complex J1 - the produced result was incorrect as it was self-interfered. There should be no common in this case.
- offset shape_type_i_c ZZ1 - the incorrect result is now produced instead of null shape.
This patch turns off some not needed modes of fix in the called ShapeFix_Face algorithm.
It stores pcurves on planes in the edges to avoid repeated computation of the same pcurves many times (it is done only when SafeInputMode is false).
It avoids unnecessary replace/apply actions in the modification context.
It removes the code that makes decomposition of surface of the face on several faces.
The new command buildpcurvesonplane has been added, which builds and stores pcurves of edges on planar faces. This is useful for investigations how presence of pcurves on planes influence performance of algorithms.
Make drawing of dimension line in snowflake test independent on the order of vertices in the result.
OpenGl_ShaderManager now overrides THE_MAX_LIGHTS within built-in shading programs
so that maximum number of lights is now limited only by OpenGL hardware
(e.g. length of GLSL program, number of defined uniforms, result performance, etc.).
THE_MAX_CLIP_PLANES is now also defined by OpenGl_ShaderManager,
so that unused lights and clipping planes do not reserve extra uniforms in GLSL programs.
V3d_View::SetLightOn() does not throw exception anymore, when the number of lights exceeds 8.
Instead, OpenGl_ShaderManager::PushLightSourceState() emits warning
in case of usage of FFP providing consistent behavior with Clipping Planes number limit.
OpenGl_LayerList::Render() now handles new option Graphic3d_RenderingParams::ToEnableDepthPrepass
which prepends additional pass to rendering pipeline filling Depth Buffer in advance.
Graphic3d_Vector has been replaced by gp_Pnt/gp_XYZ/gp_Dir depending on context.
StdSelect_ViewerSelector3d::ToPixMap() - fixed unsafe float math causing out-of-range color results.
Graphic3d_ZLayerSettings::CullingDistance() and ::CullingSize() - added
new properties configuring culling of small and distant objects, disabled by default.
OpenGl_BVHTreeSelector now handles size culling and distance culling in addition to frustom culling.
While building splits of faces (BOPAlgo_Builder::FillImagesFaces()) make sure that the orientation of the input face will be passed to its splits.
Extend draw command "normals" with new key "[-print]" which allows printing values of the normal vector.
In order to improve performance of Boolean Operations on the relatively fast cases the following improvements have been made:
1. Initialization of the FaceInfo information for the faces participating in Face/Face interference, even when the gluing is ON, to take into account intersection of their sub-shapes.
2. Code simplification & duplication removal - the methods BOPAlgo_ShellSplitter::MakeConnexityBlocks and BOPAlgo_WireSplitter::MakeConnexityBlocks have been unified into BOPTools_AlgoTools::MakeConnexityBlocks.
3. Avoid unnecessary bounding box computation for solids during DS initialization. The bounding boxes for solids will be computed during the building stage to find faces located inside solids.
For the shape self-interference check (performed by the BOPAlgo_CheckerSI), the bounding box is still computed, as it is necessary to resolve Shape/Solid intersections.
4. Use only three sample points to check coincidence of line and plane.
5. Perform necessity of planes intersection only when the gluing is off.
6. Avoid repeated initialization of 2D classifier while building splits of the faces.
7. Post treat stage:
7.1. Method CorrectWires: Save edge's data (PCurve, parameter of the vertex, range) to avoid its recalculation.
7.2. Method CheckEdge: While checking vertices on edges avoid unnecessary calculation of their location.
8. Provide possibility to disable the classification of the input solids on the inverted status (to be the holes in the space).
9. Avoid building of bounding boxes for faces/solids during splitting of the input arguments for their classification relatively hole faces/shells if there are no holes created.
10. Avoid rebuilding of the faces/solids from arguments which does not acquire any inside parts from other arguments during the operation by using their draft versions as their splits.
Test cases for the issue.
Correction of the test cases boolean gdml_public A9 and bugs modalg_7 bug28485 as they are improvements.
Additional test case for the issue #28485 as it is fixed by the current changes.
AIS_InteractiveContext::Load() now loads the object regardless specified selection mode and decomposition flag.
AIS_InteractiveContext::Load() and ::KeepTemporary() now register object in the Viewer
in the same way as ::Display() does.
Draw Harness command vdisplay has been extended with new flag -erased to load object into context in erased state.
Data races have been prevented in the code of BOPAlgo_PaveFiller that makes pcurves of edges on faces. For that:
- Put into treatment only unique edge-face pairs.
- If the same edge is treated with different faces in different threads simultaneously this also causes data races. To avoid this make the edge's copy in each thread and update the copy. The original edge is updated only after finishing parallel processing.
The new method BOPTools_AlgoTools::CopyEdge has been added to make a copy of an edge with vertices.
Big screenshot in the test script tests/bugs/modalg_7/bug28200 has been replaced with a small one.
Fixed FT_Get_Kerning misuse within Font_FTFont::AdvanceX()/Font_FTFont::AdvanceY().
Font_FTFont::loadGlyph() has been corrected to not return TRUE
in case if method called with 0 argument second+ time.
The following improvements have been made in the 3D offset algorithm for mode "Complete" and Join type "Intersection":
- RemoveInsideFaces() - Removal of the invalid parts outside of the solids built from the splits of offset faces is now performed. It helps to avoid their rebuilding and speed-up the computation.
- FindVerticesToAvoid() - Strengthening the criteria for the vertices to be avoided in the new splits.
Test cases for the issue.
Adjustment of the test cases to current behavior.
Test for 0021134: checkshape command does not return faulty shapes.
Test for 0021494: Intersection between cone and sphere fails
Test for 0022642: Refactoring of ShapeFix_Wire::FixIntersectingEdges
Test for 0022732: Reading a STEP file produces invalid shape
Test bugs vis bug26357 is revised to check colors in more robust way.
In tests bugs vis bug29091_*, size of produced file is checked to be within range of known valid sizes, rather than hard-coded (per-platform) exact sizes.
FPE signals are disabled for test bugs vis bug29127 to prevent exceptions cause by software OpenGl driver.
File data/occ/Box.brep is removed to avoid confusion with file box.brep in public data files used in tests.
Two additional non-alphabetic-order combinations of complex types are handled in RWStepAP214_ReadWriteModule.cxx
OSD_OpenStream() now uses __gnu_cxx::stdio_filebuf extension for opening UNICODE files on MinGW when using C++ file streams.
Variant accepting filebuf returns bool (true if succeeded and false otherwise).
Checks of ofstream to be opened made via calls to low-level ofstream::rdbuf() are replaced by calls to ofstream::is_open(); state of the stream is also checked (to be good).
Unicode name used for test file in test bugs fclasses bug22125 is described (for possibility to check it).
Test for 0028167: Fillet has strange form at its end
Test for 0028168: Exception is raised during Boolean operation
Test for 0028194: BRepMesh - Standard_OutOfRange exception on valid shape
Test for 0028200: Invalid topology of the general fuse result
Test for 0028216: Intersection of a face and a solid is broken up leading to empty result of Boolean common operation
Test for 0028245: Result of Cells Builder algorithm becomes invalid after removal of internal boundaries on faces
Test for 0028247: Effect of minSize parameter of BRepMesh_IncrementalMesh seems to be too strong
Test for 0028274: BOPAlgo_MakerVolume fails to create solid
Test for 0028279: Greater oscillations and higher degree of resulting B-Spline in cylinder-cylinder intersections in 7.1.0
Test for 0028354: Filleting destroys shape if the filleted edge touches a seam edge
Test for 0028366: BOP Common fails with solid and planar face
Test for 0028379: BRepMesh produces mangled mesh for a cone
Test for 0028388: Boolean common of simple face and solid results in empty compound
Test for 0028393: Boolean cut produce wrong result.
Test for 0028402: Modeling - calculation of properties of complex compounds is slow
Test for 0028406: High tolerances after boolean operation on OCCT 6.9.1
Test for 0028694: IGES reader produces too small edge covered by its vertices
Test for 0028719: Mesh - Display issue for special model
Test for 0028108: Sweep fails in "Right Corner" mode
Test for 0028696: Offset 2D algorithm produces micro edges
Test for 0028700: BRepBuilderAPI_Sewing produces too small edge covered by its vertices
Test for 0028722: Conversion of a spherical face to a spline produces an invalid shape
Test for 0028739: Draft on face fails
Test for 0028662: Data Exchange - Exception during reading large STEP file.
Test for 0028768: ShapeFix slighly corrupts the source face
Test for 0028485: Fuse of two shapes using gluing and non-destructive options gives invalid result
Test for 0028500: Artifact in shaded view of the shape
Test for 0028523: Fixshape reverses the orientation of the face
Test for 0028544: Big tolerance value is returned by Implicit-parametric algorithm
Test for 0028571: BRepOffsetAPI_MakeOffset build invalid wire
Test for 0028572: Wrong result of the mkface command
Test for 0028595: Shifting 2d curves for non-periodic surfaces leads to incorrect result.
Test for 0028596: Erroneous fillet
Test for 0028640: BRepBuilderAPI_Transform build invalid shape
Test for 0028656: 3d offset modifies the input shape
Test for 0000077: BUC60866. The BRepFill_Pipe fails.
Test for 0000078: BUC60875. Pipe is created incorrectly on two wires.
Test for 0000082: BUC60908. Incomplete section of shell by plane.
Test for 0000083: BUC60912. Section of simple BSpline surfaces is performed too slow.
Test for 0000862: GeomAPI_ExtremaCurveCurve fails on given curves
Test for 0002442: Error in BRepClass3d_SolidClassifier
Test for 0003936: Face on a surface of extrusion is extended after import to IGES
Test for 0005081: BRepOffset_MakeOffsetShape algorithm does not return valid result.
Test for 0005145: Wrong result of projection of a circle on a sphere.
Test for 0014846: ShapeFix_Wireframe::FixWireGaps() works wrong on a shape with seam edge
Test for 0016424: Exception in reading of attached IGES file
Test for 0010377: Incorrect fuse result when objects tangent by planar face
Test for 0013565: Incorrect result of Common operation
Test for 0013566: Incorrect result of Extrema between a large circle and a line
Test for 0024632: Artifacts during Boolean cut operation on neighboring parts
Test for 0005582: Impossible to make offset on the shape with degenerated edge
UpdateValidEdges in BRepOffset_MakeOffset_1 - Perform the filtering of splits of the edges in two stages:
1. Separate filtering of the connected blocks using localized bounding edges taken only from the splits of offset faces from the block;
2. Combined treatment of the remaining splits using bounding edges from the splits of all offset faces.
Protection against accessing null pointer is added in OpenGl_VertexBuffer::Create().
In command vreadpixel OpenGl-related warnings are redirected to cout so that they do not contaminate the command output.
Test grid caf presentation is configured to ignore OpenGl-related warning messages.
Tests in grid tools are configured to report status SKIPPED if tools are not available (OCCT is built without Qt).
Static function stepstrcmp() in StepData_StepReaderData.cxx is replaced by plain strcmp() to have the full strings compared (stepstrcmp() returned true if one of strings was longer than the other but common part was equal).
Protection is added to avoid exception for cases when representation entities are NULL
When removing internal boundaries between faces of the same material do it once for the whole shape, and at this keep boundaries between areas with different material.
Prs3d_DatumAspect::DrawDatumPart() now handles new flag ToDrawArrows().
vtrihedron - added new option -arrowTip.
Fixed misprint in command description -arrowscolor -> -arrowcolor.
Approximation parameters: degmin, degmax, max number of segments, boundary condition, maximal distance of projecting are added in interface of classes ProjLib_ProjectedCurve, ProjLib_ComputeApprox,
ProjLib_ComputeApproxOnPolarSurface
Algorithm of Approx/Approx_ComputeCLine is modified in order to treat maximal number of segments allowed for cutting.
Algorithm of method BOPTools_AlgoTools2D::MakePCurveOnFace(...) is modified in order to manage cases with big edge tolerances.
Test case added
Some test cases were modified according to new behavior of algorithms
Some point were incorrectly removed from the Walking-line.
In the current fix, new method IntWalk_PWalking::RemoveAPoint(...) has been added and implemented in order to provide safe removing.
So, now methods AddAPoint(...) and RemoveAPoint(...) are recommended to use for work with the Walking-line.
Added method SelectMgr_SelectableObject::Selections() and depreacted methods
Init(), More(), Next() and CurrentSelection().
Added method SelectMgr_Selection::Entities() and depreacted methods
Init(), More(), Next() and Sensitivity().
SelectMgr_SelectableObject::myAssemblyOwner has been moved to AIS_MultipleConnectedInteractive.
SelectMgr_SelectableObject::Selection() now returns NULL handle for not found selection.
SelectMgr_SelectableObject::HasSelection() is no more virtual and just retuns !Selection().IsNull().
SelectMgr_SelectionManager::mySelectors map is now declared using proper
key type Handle(SelectMgr_ViewerSelector) instead of Handle(Standard_Transient).
Boolean Operations:
1. Face/Face intersection post treatment - Unify vertices put on the section curves, which were rejected as existing ones, with the vertices of edges by which these section curves have been rejected.
2. Extend Warnings Reporting system of Boolean operations with the new warnings:
- BOPAlgo_AlertIntersectionOfPairOfShapesFailed - to be added when the intersection of pair of sub-shapes of the arguments has failed;
- BOPAlgo_AlertBuildingPCurveFailed - to be added when the building of the 2D curve of the edge on face has failed;
- BOPAlgo_AlertAcquiredSelfIntersection - to be added when the positioning and tolerances of the arguments leads to creation of self-interfered shapes.
These new warnings allow completing the operation even if intersection of some of the sub-shapes or building of some of the PCurves has failed. Moreover, they allow getting the pairs of sub-shapes on which the intersection/projection has failed, providing the user ability to analyze the intersection results.
Note that if some of these warnings appear, the result of the operation should be carefully analyzed for validity.
3. Print messages for the Warnings/Errors met during checking of the shape on self-intersection ("bopcheck" command).
AIS_ConnectedInteractive now shares HLR computation code with AIS_Shape.
BRepTools_WireExplorer::Orientation() now returns TopAbs_FORWARD
instead of throwing exception in case of infinite Edge without vertices.
StdSelect_BRepSelectionTool::GetSensitiveForFace() now creates Select3D_SensitiveCurve
from 2 points in case of infinite Edge instead of Select3D_SensitiveFace.
Font_SystemFont - added a new property SingleStrokeFont().
Font_BRepFont::renderGlyph() has been extended to not close contours
when flag SingleStrokeFont() has been set.
ProjLib_ComputeApproxOnPolarSurface::BuildInitialCurve2d - Using the correct number of points (computed in GCPnts_QuasiUniformAbscissa class) for creation of the initial curve.
