Add parameter EnableControlSurfaceDeflectionAllSurfaces to IMeshTools_Parameters enabling possibility to optimize mesh even on analytical surfaces;
Add corresponding parameter -surf_def_all to incmesh Draw command.
Increase minimum number of discretization points by one explicitly on each iteration of model healer to cover cases degenerated to line (for cases when face consists of 2 edges only).
0030442: Mesh - broken triangulation on pipe shape
Scale down min size parameter for NURBS taking into account its U and V resolution in order to prevent comparison of 2d parameters with 3d value involved in filtering process.
0032422: Mesh - Weird rendering
0029641: Mesher produce 'bad' result for extruded spline with given deviation coefficient
Added method BRepMesh_NURBSRangeSplitter::getUndefinedInterval() intended to compute checkpoint parameters for those NURBS surfaces which have no intervals at all. In this case number of poles is used to produce artificial regular grid which can be refined further. Add at least one midpoint for surfaces with one interval and only two poles.
Added BRepMesh_ExtrusionRangeSplitter and BRepMesh_UndefinedRangeSplitter derivatives from BRepMesh_NURBSRangeSplitter intended to handle special cases of extrusion surfaces and general surfaces with undefined parameters.
Improved the processing for the case where Failure flag for the meshing face is set. Specific tests added.
Check triangulation consistency even for shapes with problematic topology given that they are suitable for keeping it.
Method EstimateDeflection has been added to BRepLib in order to check and update value of deflection provided by Poly_Triangulation;
Introduction of Poly_TriangulationParameters intended to keep info about initial parameters of mesh stored by Poly_Triangulation;
BRepMesh stores user-specified parameters to Poly_Triangulation via Poly_TriangulationParameters;
Prefer initial parameters of mesh generator stored in Poly_Triangulation during check of mesh consistency.
- improved incmesh to raise exception on invalid input parameters
- added possibility to operate multiple objects
- added checking for too small values in BrepMesh algorithm
Adaptor2d_Curve2d, Adaptor3d_Curve and Adaptor3d_Surface now inherit Standard_Transient.
Interfaces Adaptor2d_HCurve2d, Adaptor3d_HCurve, Adaptor3d_HSurface and their subclasses
are now aliases to Adaptor2d_Curve2d, Adaptor3d_Curve and Adaptor3d_Surface.
Removed numerous unsafe reinterpret casts.
Generic classes Adaptor3d_GenHCurve, Adaptor3d_GenHSurface, Adaptor2d_GenHCurve2d have been removed.
Several redundant .lxx files have been merged into .hxx.
Removed obsolete adaptor classes with H suffix.
Import of arbitrary polygon is implemented in VrmlData_IndexedFaceSet.
Class IFCCAFControl_Triangulator has been moved to BRepMesh_Triangulator.
New Draw test /bugs/stlvrml/bug30421 is added.
- Standard_EXPORT which were specified for inline methods were deleted.
- ALL occurrences of DEFINE_STANDARD_RTTI_INLINE were replaced by DEFINE_STANDARD_RTTIEXT in header files and IMPLEMENT_STANDARD_RTTIEXT in source files
- ALL occurrences of "inline" keyword were deleted where it didn't not cause a linkage errors
- Added source files for classes that were without them for IMPLEMENT_STANDARD_RTTIEXT
Added custom meshing core algorithm to generate base mesh using Delabella library,
which can be enabled via IMeshTools_Parameters::MeshAlgo option or CSF_MeshAlgo environment variable.
Do not fill cirles filter upon explicit initialization.
Call base postProcessMesh functionality after initialization of circles in BRepMesh_CustomDelaunayBaseMeshAlgo.
Added Vsprintf() wrapper for vsprintf() preserving C locale.
BRepMesh: Add new mesh parameter *AllowQualityDecrease* which affects the criteria used for checking of the consistency of the existing mesh to new meshing parameters.
So if set to true it will force the meshing of the shape if current deflection strongly vary from the new one, no matter in which side.
BRepTools::Clean: Keep triangulation on non-geometric shapes (faces with no surface or edges with no curves).
Standard_EXPORT is added in declaration of virtual methods where it was missing, to allow creation of sub-classes in other DLLs.
In some classes in OpenGl package Standard_EXPORT is added for all methods to make these classes usable in other DLLs.
BRepMesh_ModelHealer - recognize a small face with 1 wire and 2 small edges as a face for refinement.
BRepMesh_DefaultRangeSplinner - reduce tolerance on tiny faces to improve the meshing results.
Added new test cases: bugs mesh bug25044_*.
Existing test cases updated to reflect improvements.
Fixed license statements within files BRepGProp_MeshProps.cxx, BRepGProp_MeshProps.hxx,
OSD_ThreadPool.cxx and OSD_ThreadPool.hxx.
Removed non-ASCII char from BRepMesh_ModelHealer.hxx.
"endl" manipulator for Message_Messenger is renamed to "Message_EndLine".
The following entities from std namespace are now used
with std:: explicitly specified (from Standard_Stream.hxx):
std::istream,std::ostream,std::ofstream,std::ifstream,std::fstream,
std::filebuf,std::streambuf,std::streampos,std::ios,std::cout,std::cerr,
std::cin,std::endl,std::ends,std::flush,std::setw,std::setprecision,
std::hex,std::dec.
New classes BRepMesh_ConstrainedBaseMeshAlgo, BRepMesh_CustomBaseMeshAlgo and BRepMesh_CustomDelaunayBaseMeshAlgo are added.
These classes allow to add any custom triangulation algorithm to BRepMesh and perform post-processing and optimization of base mesh generated by those algorithms.
BRepMesh_Delaun: added possibility to process constraints when base mesh is generated by different algorithm.
BRepMesh_DelaunayNodeInsertionMeshAlgo: added PreProcessSurfaceNodes flag controlling addition of surface nodes (either before creation of base mesh or after) to gain maximum performance from triangulation algorithms.
Minor changes:
Use simple algorithm for cylinders when internal vertices mode is switched off to speed up computations.
BRepMesh_IncrementalMesh: added Perform method allowing to execute algorithm using manually created Context.
Added new parameter KeepSmallEdges to IMeshTools_Parameters allowing to compute min size for each edge locally, depending on the length of particular edge.
Parameter -smalledges now available for incmesh command.
IMeshTools_ModelAlgo and IMeshTools_ModelBuilder have been changed to provide exception protected interfaces for performing the operations.
Protect single Edge/Face discretization methods from raising exceptions to skip broken Edges/Faces and allow mesh construction on the whole model.
0030551: Foundation Classes - Integer overflow in NCollection_CellFilter HashCode
Signed integers are not used in hash code functions now to prevent undefined behavior on left shift operations with signed integers.
A possibility of negative values of hash codes is eliminated.
INT_MAX → IntegerLast() in hash code functions.
All found hash code functions behaves uniformly now: they return a value in the range [1, theUpperBound]. Relevant comments are added to such functions.
The previous code has a condition to avoid processing the same faces if the face has a location.
The similar condition should be applied during the edges processing.
If not doing this, in the previous implementation, IMeshData_Edge instances are created for all edges(even located), but edges of faces located are not filled with curves.
As a result we had wrong local selection of edges.
Limit addition of edges to data model by ones with unique TShape and location using edges map already available in BRepMesh_ShapeVisitor.
