Regressions that appeared in OCCT 6.6.0 are fixed.
Correction of test cases for issue #25813
Reference data update for test case bugs/mnodalg_6 /bug25908
1. The reason of the regression is not-closed intersection result. This problem has been solved (in this fix) by adding joint point to the both neighbors intersection lines (lines were extended to the this intersection point). It is made in IntPatch_WLineTool::ExtendTwoWlinesToEachOther(...) method.
2. Interface of IntPatch_PointLine and inherited classes has been changed. Methods ChangeVertex(...) and RemoveVertex(...) have been added.
Test cases for this issue have been created.
Small correction in the code.
1. New sharing algorithm has been implemented. If intermediate point of some edge is included in the tube with center taken in another edge and radius equaled to maximal vertex-tolerance of both edges then these two edges are considered to be shared. This know-how touches edges only, which have common blocks with interfered faces. If they do not have any common-blocks the algorithm will work as before.
2. Interface of BOPAlgo_PaveFiller::IsExistingPaveBlock(...) method has been changed.
Creation of test case for issues #27128 and #27179
Adjusting some test cases according to their new behavior, because they are IMPROVEMENTS really (TODOs have been deleted).
New flag is inserted in parameters of static methods LinearProperties(...), surfaceProperties(...), volumeProperties(...). This flag defines to skip or not to skip second and next appearance shared topology entities (edges, faces, shells) in properties calculation.
Corresponding Draw commands is modified to take in account new parameter.
Test case for issue CR27273
Add option -skip into checkprops command
1. Algorithm of coincidence check between Walking and Restriction line has been improved in IntPatch_ImpPrmIntersection.
2. Creation of test case for this issue.
When reducing the tolerance values of the vertices put on section curves take into
account all section curves, not only those for which the tolerance have been reduced
(method void BOPAlgo_PaveFiller::CorrectToleranceOfSE()).
The new protection has been added to avoid reducing of tolerance values of vertices
to the values less than the tolerance values of edges containing these vertices.
Adjusting of test case bugs/modalg_5/bug25232_9
The map to protect the result of Boolean operation from duplicating parts in containers has been removed (method void BOPAlgo_BOP::BuildShape()).
The results of Boolean operations on containers will be the following:
1. For the arguments of collection type (WIRE, SHELL, COMPSOLID) containing overlapping parts the overlapping parts
passed into result will be repeated for each container from the input shapes containing such parts.
2. The result of the operation Fuse for the arguments of collection type (WIRE, SHELL, COMPSOLID) will contain
the same number of containers as the arguments. The overlapping parts (EDGES/FACES/SOLIDS) will be shared among them.
For example, the result of Fuse operation between two wires will be two wires sharing coinciding edges if any.
3. The result of the operation Common for the arguments of collection type (WIRE, SHELL, COMPSOLID) will consist
of the containers containing the same overlapping parts. For example, the result of Common operation between two
fully/partially overlapping wires will be two wires containing the same edges.
Style correction.
Added test case bugs/modalg_1/bug13538
Modified boolean test cases according to new begavior
1. Protection against getting access to null-handle has been entered.
2. Function AreSamePoints() has been substituted by appropriate method IntSurf_PntOn2S::IsSame(...)
Test cases for issues #27262 and #27263 have been created.
1. Processing when IntPatch_WLine/IntPatch_RLine goes through the seam edge has been improved in DecomposeResult(...) function (see IntPatch_ImpPrmIntersection.cxx).
2. Incorrect initialization of last point of IntPatch_WLine/IntPatch_RLine has been eliminated. Earlier it was the reason of exception.
Creation of test case for this issue.
Adjusting some test cases according to their new behavior. Namely:
1) tests\bugs\modalg_4\bug825 (bug825_2)
Details are described in issue #25915. In short, new intersection algorithm works better than old (WLine without "jumping"). However, Boolean operation loses degenerated edges of the sphere. Consequently, we get the result with Not-closed face.
2) tests\bugs\modalg_6\bug26684_2
TolReached of intersection curve has become smaller. Consequently, intersection algorithm works better than earlier.
Calling IntPatch_WLineTool::ComputePurgedWLine() algorithm is forbidden if Walking-line is obtained from analytic line.
Creation of test case for this issue.
The main reason of the bug is incorrect check, if the edge is seam-edge or not.
In the fix it is determined with new methods in GeomLib class.
The bug is fixed.
Creation of test case for this fix
Small correction in the code
Virtual method Generated() inherited from BRepPrimAPI_MakeSweep is overridden in class BRepOffsetAPI_MakePipe, providing information on shapes generated from the profile.
1. Step of Walking-line has been increased as possible and now computes by iteratively adaptive algorithm (every iteration checks if current step is too big/small and decreases/increases one).
2. Interface of IntWalk_PWalking class has been changed
2.1. Method MaxStep() has been added in order to know about maximal distance between 2D-points.
2.2. Method ComputePasInit(...) has been added in order to initial step value computation.
2.3. Fields myTolTang (tolerance for intersection algorithm) and myStepMin (minimal step value) have been added.
Correction of some test cases.
Creation test case for this issue.
Changes to eliminate compiler warnings.
Useless variable MAXTOLERANCEGEOM is removed in order to allow to place point at any distance from curve/surface.
Algorithm is simplified: particular calculations for analytical geometry are removed, only using of Extrema_... is kept.
Test case for issue #27110
1. The procedures for check of coincidence between Edge-Edge and Edge-Face have been added. These methods are used instead of searching interferences between corresponding sub-shapes. In most cases (including case for this issue), new methods are more reliable and faster than intersections. However, its use should be avoided in case when the edge is not coincide with edge/face of another argument evidently (e.g. if edge vertices are not in another edge/face).
2. Interface of both IntTools_EdgeFace and IntTools_EdgeEdge has been changed (adding/deleted some field and methods).
Some test cases have been corrected in accordance with their new behavior.
Test case for issue CR26132.
Performance of the algorithm ShapeUpgrade_UnifySameDomain has been improved by avoiding of multiple calls of ShapeBuild_ReShape::Apply() method.
New test cases have been added.
firsthole / holend / hole commands have been corrected.
Now they work correctly on the planar faces
Also some commented code have been deleted
Temporary update for backward compatibility with WOK
- Avoid reducing tolerance of the original edges in BOPAlgo_PaveFiller::CorrectToleranceOfSE
- If a boundary edge is considered coincident with a section curve then increase its tolerance more carefully, using real distance instead of extended reached tolerance.
- New test case bugs/modalg_6/bug27032
- Test cases boolean/gdml_private/E4-F3 have been amended to check area of the result.
- Puts TODO in test cases boolean gdml_private ZI5,ZI7,ZJ7.
TopExp::Vertices optimized for sequential calls. BRep_Tool::Curve performance regression fixed. Update for fetching point done.
Casts modified to pointers
Test case for issue CR27021
gcc warnings elimination
- Update of mfc samples
- Adjustment of test cases
- Update of CSharp sample (lost button added)
- Corrected paths to data files in 07_Triangulation mfc sample
- Update of overview (Requirements section)
- Update of upgrade guide (changes in modeling algorithms)
0026796: The result of General Fuse operation is self-intersecting shape
The fix forces creation of new sub-shapes (vertex, edge) when the tolerance of some sub-shape of an argument is to be increased.
This new behavior is turned off by default. It can be turned on using two ways:
1) Setting 'locking' flag of the arguments.
2) Calling the method SetNonDestructive(Standard_True) of the API classes.
Various bug fixes in the algorithm:
- Compute correct tolerance values for intersections of type Line/Line, Line/Plane, Plane/Plane.
- In case of Line/Plane intersection check if line's vertices lie on the plane.
- Do not allow decreasing of the tolerance value of the Line/Line intersection vertex.
- In IntTools_EdgeEdge, call the method FindParameters with proper 3D tolerance of the curve.
- Force making copy of a degenerated edge if its vertex is touched but no 2D intersection with other curves is found.
- Remove pave blocks both ends of which became referring to the same vertex after vertices substitution.
- Avoid exception in IntTools_Context::IsVertexOnLine if Extrema is not done.
- Reduce tolerance of vertex/edge using actual distances to interfered shapes if it was increased due to line/line, line/plane, or plane/plane small intersection angle.
- Update tolerance of edges to reach all representations in a common block.
- In V-E intersections, check if a vertex hits beyond shrunk range, in such case create V-V interference.
- Do not put a section edge to the result if it becomes to be a micro edge after updating its vertex.
- Correctly make vertices same-domain during the work of MakeBlocks.
- Decrease shrunk range at least on a Precision::Confusion() in addition to vertex tolerance.
- Add Confusion to bounding boxes of new shapes in DS
- Add tolerance Precision::Confusion() to compare distances of touching cases to fix regressions.
TODO marks have been removed from (or modified in) the following test cases (Improvements):
boolean bsection M3 N2 R2
boolean gdml_private B6 C2 C6 G7 I6 F6 J1 J4 M7 N1 N8 N9 O3 O4 O6 O8 O9 P1 P2 P5 Q1 Q3 Q5 S9 T2 U4 U5 U9 ZB5 ZB6 ZC1 ZC5 ZD3 ZD6 ZD7 ZH2 ZH5 ZI2 ZI5 ZI7 ZI9 ZJ3 ZJ4 ZJ7 F8 I6 G1
boolean volumemaker A5 A6 B3 B4 B7 B9 D3 D4 D7 F1
boolean bopcut_2d D5
bugs modalg_5 bug25043
bugs modalg_2 bug472_1 bug472_2 bug472_3
Test cases updated because they are still bad but can be accepted as non-regression:
boolean volumemaker C4 A3 A7 E6
bugs modalg_1 bug10232
boolean bsection N2
Put new TODO in the scripts:
bugs modalg_5 bug25232_9
bugs modalg_6 bug26619
bugs modalg_1 buc60462_2
bugs modalg_4 bug772
For the following tests the result in fix became better, so take fix result as the reference:
bugs modalg_5 bug24628
bugs modalg_6 bug26954_3
boolean volumemaker A4 B5 B6 C3 C8 D2 D5 F2
bugs modalg_2 bug472_2
bugs modalg_1 buc60776_1
- Add the method SetNonDestructive to API classes of user level
Algorithm of curve-face intersection was improved in order to take in account edge tolerance zones for more precise classification of state of intersection point.
Test case for issue CR27010
1. Algorithm of Restriction line decomposition has been created.
2. Algorithm of check of coincidences between Walking and Restriction line has been improved in new function IsCoincide(...) (which replaces IsIn2DBox(...)).
3. Some useful methods have been added in IntPatch_PointLine (and inherited) classes.
Test cases for this issue have been created.
1. Intersection curve was not bounded by faces domain. It was the reason of big edge tolerance. This problem has been fixed.
2. Interface bopcurves DRAW-command has been changed in order to make possible to reproduce intersection problem.
Creation of test case for this issue.
