BndLib/BndLib_AddSurface.cxx : algorithm of building bounding box for BSpline surfaces is improved
Test cases are modified according to current state of algorithm
Test case bug31995 added
Adaptor2d_Curve2d, Adaptor3d_Curve and Adaptor3d_Surface now inherit Standard_Transient.
Interfaces Adaptor2d_HCurve2d, Adaptor3d_HCurve, Adaptor3d_HSurface and their subclasses
are now aliases to Adaptor2d_Curve2d, Adaptor3d_Curve and Adaptor3d_Surface.
Removed numerous unsafe reinterpret casts.
Generic classes Adaptor3d_GenHCurve, Adaptor3d_GenHSurface, Adaptor2d_GenHCurve2d have been removed.
Several redundant .lxx files have been merged into .hxx.
Removed obsolete adaptor classes with H suffix.
Method Segment() of B-spline curve and surface has been extended by parameter theTolerance (theUTolerance and theVTolerance for surface), which defines the proximity between knots of a NURBS and boundaries of cutting segment. The default value of the tolerance is Precision::PConfusion().
Test cases have been added to check segmenting of B-spline surface and curves both 2D and 3D.
Bnd_Box now keeps calculating of finite part of bounding box after specifying it to be Open in some direction.
The finite part can be retrieved using new method Bnd_Box::FinitePart().
Prs3d::GetDeflection() now uses Bnd_Box::FinitePart() when applying relative deflection.
Draw Harness command bounding has been extended with option -finite returing a finite part of AABB.
New macro Standard_FALLTHROUGH is defined for use in a switch statement immediately before a case label, if code associated with the previous case label may fall through to that
next label (i.e. does not end with "break" or "return" etc.).
This macro indicates that the fall through is intentional and should not be diagnosed by a compiler that warns on fallthrough.
The macro is inserted in places that currently generate such warning message and where fallthrough is intentional.
Doxygen comments are provided for this and other macros in Standard_Macro.hxx.
Macro NO_CXX_EXCEPTION was removed from code.
Method Raise() was replaced by explicit throw statement.
Method Standard_Failure::Caught() was replaced by normal C++mechanism of exception transfer.
Method Standard_Failure::Caught() is deprecated now.
Eliminated empty constructors.
Updated samples.
Eliminate empty method ChangeValue from NCollection_Map class.
Removed not operable methods from NCollection classes.
1) BRepMesh_FastDiscretFace.cxx:
- exclude planes from procedure of inserting internal points.
- localize declaration of the container aNewVertices in each method where it is needed.
- correct the logic of the method insertInternalVerticesOther, so that to separate the processes of removing extra points and addition of new points in different cycles, thus making the code more clear and in addition stable.
- insert useful output of intermediate mesh to a file in control() method for debug purposes (with definition DEBUG_MESH).
2) Add global functions MeshTest_DrawTriangles and MeshTest_DrawLinks to draw mesh data in debug session.
3) BRepMesh_FastDiscret:
- in the method Add calculations of deflections have been simplified for non-relative mode.
- replace the attribute MinDist with Deflection in EdgeAttributes structure. Correct its computation so that later to store this value as deflection of the polygon.
4) Make protection against exception in the method BRepMesh_Delaun::addTriangle() when an added triangle creates a third connection of a mesh edge.
5) BRepMesh_EdgeTessellator.cxx, BRepMesh_EdgeTessellationExtractor.cxx: use Geom2dAdaptor_Curve in order to use b-spline cache while computing value on a curve.
6) In BndLib_Box2dCurve::PerformBSpline, avoid creating new b-spline in case of requested parameter range differ from natural bounds insignificantly.
7) In GeomAdaptor classes, postpone building of cache till the time of its actual usage. So, creation of an adapter to compute intervals of continuity does not lead to creation of internal cache.
8) In the methods BRepAdaptor_Curve::Bezier and BSpline do not call Transformed() if transformation is identity.
9) In the classes Geom_BSplineCurve, Geom_BSplineSurface, Geom_BezierCurve, Geom_BezierSurface, Geom2d_BSplineCurve, Geom2d_BezierCurve change the method Pole() to return the point by const reference.
10) In CPnts_AbscissaPoint.cxx, compute derivative by D1 instead of DN to make use of b-spline cache.
11) Change test cases to actual state:
- Number of triangles/nodes can grow due to more accurate work with deflection of edges. Now the edge is tessellated using its own tolerance instead of maximal tolerance of all shapes in the face.
- Accept new numbers of mesh errors (free links, free nodes) for really bad shapes.
- Correct the test "bugs/mesh/bug25612" to produce stable result.
- Disable redundant checks in test cases bug25378* (lower limit for computation time).
- Speed up iso-lines computation for offset of bspline surfaces. For that use adaptor instead of original surface in evaluator of approximation.
- Add output of polylines for debug of insertInternalVerticesOther().
Reference data in test case bugs\moddata_2\bug453_3 have been changed to be close to expected theoretical values. This makes the test give stable result on different platforms.
Add method for exact calculation of bounding boxes
Modifications made according to remarks.
Small correction of test case for issue CR27352
Small correction of test cases for issue CR27352
Avoid warning on VS2015
Poles bounding box for curve added for bezier and bspline curves.
Method Poles() for Bezier curve added.
Test case for issue CR26560
Function to compute subshape max tolerance has been added.
Fixed bounding box expanding at Face/Face step of boolean operation.
Test cases are updated to the new behavior.
Automatic upgrade of OCCT code by command "occt_upgrade . -nocdl":
- WOK-generated header files from inc and sources from drv are moved to src
- CDL files removed
- All packages are converted to nocdlpack
Automatic update by command "occt_upgrade . -downcast"
C-style cast of Handle to that of derived type (now illegal) is replaced by call to DownCast()
Const reference local variables of Handle type initialized by result of DownCast are replaced by normal variables.
Mostly duplicated comments were removed and missing ones were moved
into dedicated class CDL files.
Some more duplicated comments were removed from CDL files.
Correction of merge
Range of changing of some analytic curves is computed by other methods. It allows computing face's boundaries with more precise.
Tolerance was increased to provide successful work of some algorithms.
Functions BRepOffsetAPI_MiddlePath::Build() and ApproxWithPCurves(...) (file IntTools_FaceFace.cxx) were changed according to new result of algorithm's work.
It is possibly for "outboundaried faces" (see bug#23675) to compute incorrect UV-Bounds, when first parameter is more than last. To avoid it, extended control of computed bounds was added.
Function for fail sameparameter fixing was added to HLRAppli_ReflectLines to avoid creation bad shapes after algorithm's work.
In file ShapeFix_ComposeShell.cxx only text formatting was changed.
Some test cases are changed according to their new behavior.
Added test case bugs/moddata_3/bug23511
License statement text corrected; compiler warnings caused by Bison 2.41 disabled for MSVC; a few other compiler warnings on 54-bit Windows eliminated by appropriate type cast
Wrong license statements corrected in several files.
Copyright and license statements added in XSD and GLSL files.
Copyright year updated in some files.
Obsolete documentation files removed from DrawResources.
Package "BndLib":
Functionality of the files "BndLib_Compute.gxx", "BndLib_Compute2d.cxx" and "BndLib_Compute3d.cxx" (methods Compute(...) for 2d and 3d cases) moved to BndLib.cxx (to the template method Compute(...)). For that had to edit work with points and coordinates a little i.e. method Compute(...) was updated and some methods where Compute(..) is called in "BndLib.cxx".
Fix first subset of warnings (about 100)
- while(1) and similar constructs replaced by for(;;)
- some uninitialized variables corrected
Got rid of Warning C4189: local variable is initialised but not referenced
Corrected mistakes after getting rid of C4189 compiler warning
Corrected some mistakes that led to compiling errors
Fixed test case because of improvement message - removed unnecessary TODO.
Small fix: tabs have been replaced with whitespaces.
Added TODO for Windows platform
removed last TODO
Corrected mistakes, returned some #ifdef DEB code, fixed test case .
Restoring a few places which have been modified too much
Small grammar fix
Deleted unnecessary puts in bugs/end
Correct handling of periodic bsplines in extrema. If range of edge is out of the period, interval boundaries should be recomputed
Face orientation is changed to forward for simplification of wires collection regressions were fixed
Bounding box for periodic splines is corrected
