1. When computing the iso-lines for the face (*DBRep_IsoBuilder*) prepare the Hatching algorithm with the following elements:
a. Trimmed p-curves of edges. The trimming parameters are computed by intersection with p-curves of the neighboring edges. The trimming will be performed only if the intersection point is covered by the tolerance of common vertex.
b. 2D segments connecting the p-curves of the neighboring edges. These segments will close the 2D gaps, which are closed in 3D by the tolerance of vertices shared between edges. This will allow trimming correctly the iso-lines passing through such gaps.
2. Implementation of the additional Init() method for WireExplorer algorithm taking UV bounds of the face to avoid their repeated computation when work working with a face having multiple wires.
3. Test cases for the issue.
While building splits of faces (BOPAlgo_Builder::FillImagesFaces()) make sure that the orientation of the input face will be passed to its splits.
Extend draw command "normals" with new key "[-print]" which allows printing values of the normal vector.
TopAbs::ShapeTypeToString() is now used instead of duplicating TopAbs_ShapeEnum printing code.
vselmode now accepts shape type string for activating standard AIS_Shape selection modes.
Class DBRep_DrawableShape is changed to postpone generation of display data until the shape is actually displayed (for the first time).
Test perf draw bug28404 is added.
Macro NO_CXX_EXCEPTION was removed from code.
Method Raise() was replaced by explicit throw statement.
Method Standard_Failure::Caught() was replaced by normal C++mechanism of exception transfer.
Method Standard_Failure::Caught() is deprecated now.
Eliminated empty constructors.
Updated samples.
Eliminate empty method ChangeValue from NCollection_Map class.
Removed not operable methods from NCollection classes.
Toolkit 'TKHLR' was fully refactored for 'Standard_Address' and macros except about half of package 'HLRBREP' there 'Standard_Address' is used through the 'generic' mechanism.
- Added new static methods Read and Write in BinTools class to store/retrieve a shape in binary format.
- Added new draw commands "binsave" and "binrestore"
- Added test cases to test the new methods.
- Updated documantation with desription of the new BinTools class methods and corresponding BRepTools class methods.
Calculating the offset vertices by the superposition of intersection vertices
between pairs of edges (BRepOffset_Inter2d::FuseVertices()).
To obtain stable result when calculating the superposition of vertices
they are sorted (BOPTools_AlgoTools::MakeVertex()).
The support of vertices has been added in nexplode command.
Small correction of tests cases for issue CR27540
Parameter for adaptive computation of minimal 2D meshing precision added in BRepMesh_IncrementalMesh API.
Corresponding option -adaptive added in DRAW command
All meshing parameters are collected in structure, BRepMesh_FastDiscret::Parameters, which is now used to define and manipulate parameters of the algorithm.
- Class OSD_EnvironmentIterator is removed (not used, and would definitely fail under Windows if tried)
- Methods UserId() and GroupId() removed from OSD_FileNode (cannot be made portable, as there is no integer IDs of user and group on Windows)
- Draw_ProgressIndicator corrected to properly pass address via Tcl
- OSD_File.cxx: local function is refactored to avoid senseless encoding / decoding of results
- OSD_Process::UserId() method removed, as it cannot be made cross-platform (no integer IDs on Windows)
- OSD_Thread: use WinAPI conversion functions to avoid warnings
- OSD_WNT.cxx: recursion counter passed via function argument instead of TLS
- TDF_LabelMapHasher revised to use correct hasher function for an address
1) Macro definition WNT replaced by _WIN32 and _MSC_VER for platform and compiler detection accordingly.
2) Macro definition LIN replaced by __linux__ macro.
3) Macro definition DEB replaced by OCCT_DEBUG macro.
Automatic upgrade of OCCT code by command "occt_upgrade . -nocdl":
- WOK-generated header files from inc and sources from drv are moved to src
- CDL files removed
- All packages are converted to nocdlpack
Missing headers added; includes of headers "Handle_...hxx" removed.
Misuses of macro Handle() and its use in typedefs corrected.
Alias classes Profile and Option are removed from IFSelect; ones defined in MoniTool are used directly.
Removed header files defining only Handle classes (except Image_PixMap_Handle.hxx)
Classes SelectMgr_BaseFrustum and now inherit Standard_Transient and can be manipulated by Handle (not NCollection_Handle)
Fixed reference-type local variable pointing to temporary object
Use of handle in conditional expressions and comparisons to NULL are replaced by call to method IsNull()
Macros ending on "DEB" are replaced by OCCT_DEBUG across OCCT code; new macros described in documentation.
Macros starting with DEB are changed to start with "OCCT_DEBUG_".
Some code cleaned.
Method BRep_Tool::IsClosed() extended to analyze closure of wires in addition to shells and solids.
External and Internal edges and vertices are ignored in this check.
Analysis of compounds is disabled.
Update of flag Closed according to actual state is added in most places where new shells are constructed.
Draw-command and test case for issue CR25202
All inclusions of "config.h" were removed.
All places where macros defined by config.h were checked and removed
Small corrections for mac os.
Unused code in file OSD_Disk.cxx was removed.
Unused macros and includes were removed from samples and code.
Added necessary includes for MacOS.
Correct new additional compilation warning on Linux platform.
Fix for error in OSD_Chronometer on Debian70/Fedora18
Existing method of Cylinder-Cylinder intersection computing is based on finding the analytic line (as a function of one argument) and converting one into the walking-line with set of equidistant (along the line parameter) points.
The main advantage of applied method is using adaptively computed step. Necessary step is computed into every point of the obtained walking-line. At that we receive final walking-line directly (without preliminary analytic line) and we determine moments more precisely, when it should be split (see IntPatch_ImpImpIntersection_4.gxx).
The main disadvantages is bad working this method for non-trimmed cylinders (with infinite bounds), because step value is depend on the boundaries values.
More over, new method always returns walking-line, while intersection result can be an analytic curve (lines, circle, ellipse). That is NO good. Therefore, analytic curve is computed by existing method.
In conclusion, in spite of covering almost all more often meeting cases, new method has limited application. Then we should use the existing old method.
Additionally, method MinMax() is added (see Standard_Real.hxx file). It uses into new algorithm.
Some test cases is changed according to their new behavior.
Test case for issue CR24915 is added.
Into GeometryTest_APICommands.cxx only tabulations were chaged.
"Extending" of isolines (see Geom2dHatch_Hatcher.cxx).
Small correction of test case for issue CR24915.
Removed CDL declarations; Data collections are replaced by NCollections; Small code refactoring.
Remove definition of BRepMesh class. Code refactoring of BRepMesh_IncrementalMesh.
Function BRepMesh_Write storing BRepMesh_DataStructureOfDelaun to BRep file is added for debug needs.
Static method BRepMesh_GeomTool::IntLinLin has been added to eliminate code duplications in BRepMesh_Dealun and BRepMesh_CircleTool.
BRepMesh_CircleTool simplified method to find circumcircle.
Fix merging conflicts
Remove redundant function
Fix compilation warning on MacOS
Revert changes occurred during rebase
Resolved merging conflicts
Use parallel flag with BRepMesh_FastDiscret
Test cases for issue CR25039_2
Mostly duplicated comments were removed and missing ones were moved
into dedicated class CDL files.
Some more duplicated comments were removed from CDL files.
Correction of merge
Redundant keyword 'mutable' removed in CDL files.
In IGESConvGeom_GeomBuilder, unused methods MakeXY() and MakeXYZ() removed.
Method StepAP214_AutoDesignGroupAssignment::Init() replicating same method of the base class is removed as it causes CDL extraction error after above (seemingly irrelevant) changes.
Global functions are added to allow a user performing DRAW commands from VS Command Window when DRAW is interrupted on a breakpoint.
Previously existing functions are adapted to work with Visual Studio debugger (Command Window).
A manual describing use of these functions and other debugging facilities and some hints is added to Developer Guides.
Minor corrections and refinement of debug.md.
License statement text corrected; compiler warnings caused by Bison 2.41 disabled for MSVC; a few other compiler warnings on 54-bit Windows eliminated by appropriate type cast
Wrong license statements corrected in several files.
Copyright and license statements added in XSD and GLSL files.
Copyright year updated in some files.
Obsolete documentation files removed from DrawResources.
Removing pPotentially uninitialized local variable
Got rid of most of warnings C4701: Potentially uninitialized local variable
Removed redundant variable definitions.
Refactored a part of AppParCurves_ResolConstraint CTOR.
Replaced 0. to Precision::Confusion for tolerance vars;
Changed values for min and max parameter vars;
Got rid of redundant variables' initialization.
Added DRAW command dlocale to set and query current locale of the C subsystem
Equivalents of C functions working with conversions of strings to/from reals added in Standard_CString, providing locale-independent behavior (using always "C" locale)
In DRAW packages, calls to atof() and atoi() are replaced by direct calls to Draw::Atof() and Draw::Atoi(), respectively, instead of substituting by #define
Use of atof(), strtod(), and *scanf() involving floating point conversions in OCCT code replaced by locale-independent Atof() and Strtod()
Calls to sprintf() involving floating point in OCCT code are replaced by call to locale-independent Sprintf(), except a few places where converted strings are used immediately for display in the 3d viewer
Changes of global locale are eliminated throughout OCCT code
Proposed correction for GNU libC where v*printf_l functions are absent
Added test case (bugs xde bug22898) for data exchange operations with non-standard locale
Use xlocale on Mac OS X and within glibc
Corrected strtod_l wrapper
Generate error rather than warning
Introduce Standard_CLocaleSentry replacement for removed OSD_Localizer
Standard_CLocaleSentry - copy locale string
Standard_CLocaleSentry - use _configthreadlocale on Windows
Standard_CLocaleSentry::GetCLocale() - return locale_t rather than void*
Corrected misprint in ~Standard_CLocaleSentry()
Use French locale in bug22898 test case
Mark test case as skipped if locale is unavailable on tested system.
Use fr_FR locale for tests on Mac OS X
This option allows to see the number of sub-shapes counting the same sub-shapes with different location as different sub-shapes.
Adding test cases for this fix
