The empty copy constructor, assignemnts operator, default constructors added to the following classes:
The following classes use “new” function without Handles:
- Select3D_PointData
- BSB_T3Bits
- IntPatch_InfoPD
- LDOM_StringElem
- BinomAllocator
- ProjLib_OnSurface
- Standard_MMgrFactory
Useless declaration of default constructor have been deleted.
1. Dump of WLine is shown with more precise.
2. Equation solving with more precise.
3. Dump of Multy-line.
4. Code optimization.
Some test cases were updated in accordance with their new behaviour.
Correction of test cases for issue CR25531
1. Function IsSame(...) for IntSurf_PntOn2S was added (see IntSurf_PntOn2S.cdl for detail information).
2. Inserting additional points is forbidden if existing WLine contains only two points coincided.
Test-case for issue #25488
Macros ending on "DEB" are replaced by OCCT_DEBUG across OCCT code; new macros described in documentation.
Macros starting with DEB are changed to start with "OCCT_DEBUG_".
Some code cleaned.
1. DRAW-commands for curve/surface continuity returning were changed.
2. Output of "distmini" DRAW-command is amended.
3. Function MinMax() was moved from Standard_Real to IntPatch_ImpImpIntersection_4.gxx.
4. Incorrect computing of nbcurveC1 in Geom2dConvert::C0BSplineToC1BSplineCurve(...) function was liquidated.
Test cases were changed.
Existing method of Cylinder-Cylinder intersection computing is based on finding the analytic line (as a function of one argument) and converting one into the walking-line with set of equidistant (along the line parameter) points.
The main advantage of applied method is using adaptively computed step. Necessary step is computed into every point of the obtained walking-line. At that we receive final walking-line directly (without preliminary analytic line) and we determine moments more precisely, when it should be split (see IntPatch_ImpImpIntersection_4.gxx).
The main disadvantages is bad working this method for non-trimmed cylinders (with infinite bounds), because step value is depend on the boundaries values.
More over, new method always returns walking-line, while intersection result can be an analytic curve (lines, circle, ellipse). That is NO good. Therefore, analytic curve is computed by existing method.
In conclusion, in spite of covering almost all more often meeting cases, new method has limited application. Then we should use the existing old method.
Additionally, method MinMax() is added (see Standard_Real.hxx file). It uses into new algorithm.
Some test cases is changed according to their new behavior.
Test case for issue CR24915 is added.
Into GeometryTest_APICommands.cxx only tabulations were chaged.
"Extending" of isolines (see Geom2dHatch_Hatcher.cxx).
Small correction of test case for issue CR24915.
Mostly duplicated comments were removed and missing ones were moved
into dedicated class CDL files.
Some more duplicated comments were removed from CDL files.
Correction of merge
Redundant keyword 'mutable' removed in CDL files.
In IGESConvGeom_GeomBuilder, unused methods MakeXY() and MakeXYZ() removed.
Method StepAP214_AutoDesignGroupAssignment::Init() replicating same method of the base class is removed as it causes CDL extraction error after above (seemingly irrelevant) changes.
Generic classes from "AppParCurves" package:
"AppDef_SmoothCriterion", "AppDef_LinearCriteria" and "AppDef_Variational" moved to the corresponding non-generic classes "AppDef_SmoothCriterion", "AppDef_LinearCriteria" and "AppDef_Variational" to "AppDef" package. Also several "*.cxx" files of "AppDef_Variational" class merged to one ".cxx".
Generic class from "IntImp" package:
"IntImp_ZerCOnSSParFunc" moved to the corresponding non-generic class "IntPatch_CSFunction" to "IntPatch" package.
Next unused generic classes were removed:
- IntCurveSurface_SurfaceTool
- Intf_InterferencePolygon3d
And some other minor changes.
1) Generic class "Intf_InterferencePolyhedron" from "Intf" package converted to the non-generic class and moved to the "IntPatch" package. Name of this class was changed to "IntPatch_InterferencePolyhedron".
2) Generic class "MoniTool_Elem" from "MoniTool" package converted to the non-generic class "MoniTool_TransientElem".
3) Generic class "IntWalk_PWalking" from "IntWalk" package converted to the non-generic class. And internal class "TheInt2S" of "IntWalk_PWalking" moved from IntWalk_PWalking.cdl to IntWalk.cdl for correct building. Also several "*.cxx" files of this class merged to one ".cxx".
4) Generic class "Transfer_SimpleBinder" from "Transfer" package converted to the non-generic class and moved to the "TransferBRep" package. Name of this class was changed to "TransferBRep_BinderOfShape".
5) Generic class "Geom2dInt_CurveTool" from "Geom2dInt" package converted to the non-generic class "Geom2dInt_Geom2dCurveTool".
6) Generic class "MAT2d_BisectingLocus" from "MAT2d" package converted to the non-generic class and moved to the "BRepMAT2d" package. Name of this class was changed to "BRepMAT2d_BisectingLocus".
7) Generic class "MAT_Mat" from "MAT" package converted to the non-generic class and moved to the "MAT2d" package. Name of this class was changed to "MAT2d_Mat2d".
Includes of Handle*.hxx headers replaced by include of corresponding class (where possible without redesign of the classes).
Minor correction against compiler warning (vc10 64-bit) in BOPAlgo
Remove double header inclusions
Correction of minor mistake
Main changes are in "IntWalk_IWalking::TestDeflection(...)" function (IntWalk_IWalking_5.gxx).
Some test cases were corrected according to their new behavior.
License statement text corrected; compiler warnings caused by Bison 2.41 disabled for MSVC; a few other compiler warnings on 54-bit Windows eliminated by appropriate type cast
Wrong license statements corrected in several files.
Copyright and license statements added in XSD and GLSL files.
Copyright year updated in some files.
Obsolete documentation files removed from DrawResources.
PCurve is extended to surface boundary forcefully.
It is made by finding some additional points (if it is possibly).
"bopcurves" DRAW-command returns number of found 3D-curves and (as an option) 2D-curve (see help for more detail information).
Test cases for issue CR24585
1. Checking, if intersection curve is collapsed, is added. (file GeomInt_LineConstructor.cxx)
2. Earlier, intersection line was considered as valid if only mid-point of every interval of this line is into two intersected surfaces (with given tolerance). That's no good because after inserting of new points, old points, which is considered as valid only because they are into beginning or into end of interval (therefore, they was not checked), moved to mid of interval and became invalid. Therefore, checking for first and last points was added. (file GeomInt_LineConstructor.cxx)
3. Intersection line became valid (see bug description) after adding of new additional points into it (file IntPatch_PrmPrmIntersection.cxx). Methods for finding and adding of new points were added. (file IntWalk_PWalking_1.gxx)
Some test cases were changed.
Test cases for issue CR24472
Fixed type casts in NCollection maps
Avoid invalid type cast in handling of LDOM text object
Use correct pointer type in callback function of Graphic3d_CGraduatedTrihedron class
Format of printf() simplified in IntPatch_Point.cxx
Incorrect curve is got after Decompose method applying. This method's using should be restrict.
Decomposition is required if intersection curve contains some parts, where U-parameter on quadric surface changes too sharply.
Decompose method is called for Cone and Sphere only (it does not require for Cylinder).
Comments are changed by jgv.
Test case for issue CR24427
Added test case bugs/moddata_3/bug24427_2
Compiler warning is liquidated.
Test is corrected.
The intersection between Cone and one of the following surfaces: Cylinder, Sphere, Cone and Torus
is treated as analytical when the axes of the surfaces are collinear.
Test case for issue CR24505
When warnings are enabled, compilers report lots of occurrences
of unused local variables, which makes it harder to find other
meaningful warnings.
This commit does not fix all unused local variables.
Fix new type conversion warning
Code cleaned to avoid MSVC compiler warnings on unused function arguments.
Several useless pieces of code are removed.
Changes in IntTools_EdgeFace.cxx, Blend_Walking_1.gxx, Bnd_BoundSortBox.cxx, ProjLib_ProjectedCurve.cxx are reverted (separated to specific issue for more in-depth analysis).
Modifications:
1. The validity of the intersection point between edge and face is checked with sum of the tolerance values of the edge and face.
2. The intersection between toroidal surface and one of the following surfaces: Plane, Cylinder, Sphere, Cone or Torus
is treated as analytical in the following cases:
1) Torus and Plane: a. Axes of the surfaces are parallel;
b. Axes of the surfaces are perpendicular and location of the torus is lying on the plane;
2) Torus and Sphere: The location of the sphere is lying on the line made from toruses axis;
3) Torus and Cone, Cylinder or Torus: The axis of the surfaces are collinear.
In all cases the intersection line(s) is(are) circle(s).
Added test cases bugs/modalg_5/bug24470
The intersection between torus with minor radius more than (or equal to) the major radius and any other surface is considered as parametric.
Eliminated warnings -Wswitch shown by gcc
Eliminated two new warnings about wrong initialization order
Eliminated warnings about unused functions.
A few more ICC warnings (type conversions) fixed
List of resolved warnings:
c4063: Aspect.cdl; TObj_Application.cxx; PCDM.cdl; OpenGl_Workspace_5.cxx;
c4100: XDEDRAW.cxx; ViewerTest_ViewerCommands.cxx; TopOpeBRep_FacesFiller_1.cxx; TopClass_Classifier3d.gxx; TDataStd_ReferenceArray.cxx; QABugs_19.cxx; IntPatch_ImpImpIntersection_5.gxx; HLRTopoBRep_DSFiller.cxx; HLRBRep_Data.lxx; DPrsStd_AISPresentationCommands.cxx; BRepMesh_Delaun.cxx;
c4127: BOPTools_AlgoTools2D.cxx; MAT_Mat.gxx; GeomFill_SweepSectionGenerator.cxx; BRepMesh_Delaun.cxx;
c4189: IntCurveSurface_Inter.gxx; IGESToBRep_BRepEntity.cxx; BRepMesh_Delaun.cxx; BRepAlgo_Loop.cxx; IntStart_SearchOnBoundaries_1.gxx;
c4190: Plugin_Macro.hxx;
c4389: Visual3d_View.cxx; TopOpeBRep/TopOpeBRep_vpr.cxx; TDataStd_BooleanArray.cxx; IntPatch_ALine.cxx;
c4701: BRepAlgo.cxx;
c4702: MNaming_NamingRetrievalDriver_1.cxx; MNaming_NamingRetrievalDriver_2.cxx; BRepClass3d_SolidExplorer.cxx;
c4706: TestTopOpe_BOOP.cxx;
Additional fixes:
- old-style declarations of C functions in IGES and STEP parsers
- clean-up of debug code, fixes for building in Debug mode
- in BRepFill_TrimShellCorner.cxx, lines 878-9, wrong use of assignment instead of comparison fixed
- fix for Plugin_Macro reverted; warning 4190 disabled instead
- in IntPatch_ALine.cxx, line 520, wrong comparison of boolean with index fixed
- in InterfaceGraphic_Visual3d.hxx, field IsCustomMatrix made boolean
- in TopOpeBRepBuild_ShapeSet, obsolete (unused) methods removed
Removing pPotentially uninitialized local variable
Got rid of most of warnings C4701: Potentially uninitialized local variable
Removed redundant variable definitions.
Refactored a part of AppParCurves_ResolConstraint CTOR.
Replaced 0. to Precision::Confusion for tolerance vars;
Changed values for min and max parameter vars;
Got rid of redundant variables' initialization.
