A tool to remove tails from the wires of a shape was created.
The tool is based on mechanism 'ShapeFix',
is located in types 'ShapeFix_Wire' and 'ShapeAnalysis_Wire',
is enabled through method 'ShapeFix_Wire::FixTailMode' and
is initialized by methods 'ShapeFix_Wire::SetMaxTailAngle' and 'ShapeFix_Wire::SetMaxTailWidth' and
is called through method 'ShapeFix_Wire::FixTails'.
The status of any performing of the last method is accessible through method 'ShapeFix_Wire::StatusFixTails'.
The tail angle is checked only at the tail start.
Mechanism 'ShapeFix' was modified:
- the tool is disabled by default;
- algorithm 'Fix notched edges' is disabled then the tool is enabled;
- the tool and the last algorithm work in turns then the tool works on the request.
'Draw' command 'fixshape' was extended by options '-maxtaila' and '-maxtailw' to test the tool.
'Draw' tests to test the tool were created.
Algorithm 'fixshape' was changed in type 'ShapeProcess_OperLibrary' to
- use new parameters named 'FixTailMode', 'MaxTailAngle' (in degrees) and 'MaxTailWidth' from the algorithm context;
- apply the tool after the shape will be fully fixed if the tool was enabled.
Place holders for the new parameters were created in the resource file of mechsnism 'STEPControl_Reader'.
Test cases for issue CR26261
1. B-spline cache was moved into separated classes: BSplCLib_Cache for 2D and 3D curves and BSplSLib_Cache for surfaces.
2. The cache is used now in corresponding adaptor classes (Geom2dAdaptor_Curve, GeomAdaptor_Curve and GeomAdaptor_Surface) when the curve or surface is a B-spline.
3. Algorithms were changed to use adaptors for B-spline calculations instead of curves or surfaces.
4. Precised calculation of derivatives of surface of revolution is implemented for the points of surface placed on the axis of revolution (Geom_SurfaceOfRevolution.cxx)
5. Small modifications are made to adjust algorithms to new behavior of B-spline calculation.
6. Test cases were modified according to the modern behavior.
7. Changes in BOPAlgo_WireSplitter, BOPTools_AlgoTools, BRepLib_CheckCurveOnSurface and ShapeAnalysis_Wire to use adaptors instead of geometric entities
8. Allow Geom2dAdaptor and GeomAdaptor in case of offset curve to use corresponding adaptor for basis curve
Modification of test-cases according to the new behavior.
The analysis of small area in the method ShapeAnalysis_Wire::CheckSmallArea is performed the following way:
- On the fisrt step algorithm produces a rough estimation of part of surface area.
- In a case if obtained estimation is less than tolerance then evaluate real area and comapre this value with tolerance.
- New flag has been added to XSTEPResource/IGES. In a case if flag is true the faces with small 3d area is removed from ShapeFix context.
Test-case for issue #25923 and update test-cases in de group according to the new behavior.
Recalculate of tolerance before edge cutting
Test case for issue CR25013
add try to increase tolerance before splitting in singularity during PCurve adding.
Correction of test cases for issue CR25013
The number of points to divide the edge curve on a segments to compute a
boundary box does not provide a good tolerance. So a resultant boundary
box has an incorrect bounds. As a result the intersection near to a
tangent of curve does not detected.
Test case for issue CR25823
The reason of FAIL status of FixGaps3d is that the trying to convert
curves to BSplines on valid edges (both adjacent points saticfy a
precision) leads to skipping of the convertation and gives wrong status.
Check of the gap on adjacent points before try ro convert curves was added.
Test-case for issue #24881
Check whether p-curve being projected can be approximated by straight line is made before full-scale projection, to improve performance.
If straight, pcurve is created as Line only if this will lead to the same range parameterization as 3d curve, otherwise BSpline of degree 1 is created.
Re-approximation of line pcurves by bsplines removed from ShapeFix_Edge.
Test case updating to new behavior.
Added "static" keyword to the fixPeriodictyTroubles() function.
Update of test-cases according new behavior
1. Using of the "Closed" flag was unified:
a) this flag is applicable for TopoDS_Wire and TopoDS_Shell only, because these entities may hedge an area in 2D space or a volume in 3D space correspondingly;
b) other types of TopoDS shapes are passing over this flag;
c) changing of this flag should be controlled by high-level algorithms (not BRep_Builder).
2. Implemented verification of the closedness of edges. An edge is closed if and only if its first and last vertices are the same.
3. Test cases were changed according to new behavior.
Messages are registered in ShapeExtend_MsgRegistrator added to ShapeCutom and ShapeUpgrade packages
All operators of ShapeProcess_OperLibrary are instrumented with MsgRegistrator
0025520: To provide info on what has been done by Shape Process and Shape Fix
Update SHAPE.fr
Fix some messages (minor change)
Added check and fix of tolerances of all vertices after performing all fixes.
It is necessary to avoid situation when point of vertex belonging a few faces was changed for current face
but edges containing this vertex belonging before fixed face are not taking into account.
Mode FixVertexTolMode to manage check tolerance of vertices was added in ShapeFix_Shape
class. (default value is equal to -1)
Method to change FixVertexTolMode mode FixVertexTolMode() was added in ShapeFix_Shape class
Test case for CR25455
Macros ending on "DEB" are replaced by OCCT_DEBUG across OCCT code; new macros described in documentation.
Macros starting with DEB are changed to start with "OCCT_DEBUG_".
Some code cleaned.
Method BRep_Tool::IsClosed() extended to analyze closure of wires in addition to shells and solids.
External and Internal edges and vertices are ignored in this check.
Analysis of compounds is disabled.
Update of flag Closed according to actual state is added in most places where new shells are constructed.
Draw-command and test case for issue CR25202
fix the notched edges twice per face - before checking for missing seam and after
Test case correction for issue CR24983
Add check for invalid Surface of linear extrusion (with basis curve - line and extrusion direction parallel to this line) during converting STEP surface
Small corrections of test cases for issue CR24983
Add checks for cone-like surfaces during seam fixing
Delete check for missing degenerated edge for cones in FixMissingSeam() function, because this check is exist in FixPeriodicDegenerated(). Check for uniqueness of wire is unnecessary after this.
Update of test-cases
Mostly duplicated comments were removed and missing ones were moved
into dedicated class CDL files.
Some more duplicated comments were removed from CDL files.
Correction of merge
Redundant keyword 'mutable' removed in CDL files.
In IGESConvGeom_GeomBuilder, unused methods MakeXY() and MakeXYZ() removed.
Method StepAP214_AutoDesignGroupAssignment::Init() replicating same method of the base class is removed as it causes CDL extraction error after above (seemingly irrelevant) changes.
Range of changing of some analytic curves is computed by other methods. It allows computing face's boundaries with more precise.
Tolerance was increased to provide successful work of some algorithms.
Functions BRepOffsetAPI_MiddlePath::Build() and ApproxWithPCurves(...) (file IntTools_FaceFace.cxx) were changed according to new result of algorithm's work.
It is possibly for "outboundaried faces" (see bug#23675) to compute incorrect UV-Bounds, when first parameter is more than last. To avoid it, extended control of computed bounds was added.
Function for fail sameparameter fixing was added to HLRAppli_ReflectLines to avoid creation bad shapes after algorithm's work.
In file ShapeFix_ComposeShell.cxx only text formatting was changed.
Some test cases are changed according to their new behavior.
Added test case bugs/moddata_3/bug23511
MAIN CHANGES:
FixAddNaturalBound: the boundaries of "natural bound addition" are restricted: a face, that does not contains an outer wire, should not have any infinite UV boundaries due to new face building (with using a surface) requires specified UV boundaries.
FixAddNaturalBound: myResult is updated in FixAddNaturalBound when the method creates a new face with natural boundary. myResult is required to be updated for next "fix small-area wires" algorithm
IsPeriodicConicalLoop: incorrect working BRepTools_WireExplorer was replaced on TopoDS_Iterator.
a natural bound is added to all the faces are constructed with UV-periodical surfaces (not only sphere and torus; e.g., closed b-splines)
other:
ShapeAnalysis: ReverceSeq renamed to ReverseSeq
BRep_Tool Pnt and Tolerance has the check for null TShape
Test cases for issue CR24249
required null checks were added
test cases were corrected according to their new behavior
Correction test case for issue CR24249
Part 1: Speed up of import functionality.
Correction in ShapeFix_IntersectionTool::FixIntersectingWires() - preliminary construction of ShapeAnalysis_Surface tool for the whole face; computation of 2d bounding boxes for edges and wires before intersection checking.
Part 2: Speed up of check shape.
Correction in BRepCheck_Face::IntersectWires() in the same way: preliminary computation of 2d boxes for edges and wires in order to reduce the number of calls of intersection tool for pair of wires.
Test cases for issue CR24596
Includes of Handle*.hxx headers replaced by include of corresponding class (where possible without redesign of the classes).
Minor correction against compiler warning (vc10 64-bit) in BOPAlgo
Remove double header inclusions
Correction of minor mistake
License statement text corrected; compiler warnings caused by Bison 2.41 disabled for MSVC; a few other compiler warnings on 54-bit Windows eliminated by appropriate type cast
Wrong license statements corrected in several files.
Copyright and license statements added in XSD and GLSL files.
Copyright year updated in some files.
Obsolete documentation files removed from DrawResources.
Projection of 3d points corresponding to range of edge on 2d curve considered as successful for all cases to except for cases when projection is not made.
Initialization initial values of flags
Modification initial values of flags setting status Done for first and last parameters
Adding new draw-command for issue CR24370
Test case for issue CR24370
Fixed building by VS 2005 and VS 2013 (Express):
- macro _WIN32_WINNT defined in BOPCol_TBB.hxx for building with TBB on VS 2005
- compiler warnings specific for VS 2005 (vc8) fixed (explicit casts added in assignment expressions involving small integer types)
- definition of functions atanh, acosh, asinh is avoided for vc12 and later (they are provided by CRT in vc12)
- math constants (M_PI and similar) are defined by including math.h rather than by custom code
- misuse of stream operator << fixed in a few places
Fixed several cases of potentially uninitialized variables in Shape Healing.
Corrections to avoid warning for unused variable distmini and to avoid regression for case bug22805
Removing pPotentially uninitialized local variable
Got rid of most of warnings C4701: Potentially uninitialized local variable
Removed redundant variable definitions.
Refactored a part of AppParCurves_ResolConstraint CTOR.
Replaced 0. to Precision::Confusion for tolerance vars;
Changed values for min and max parameter vars;
Got rid of redundant variables' initialization.
In cutting sphere it's seam edge was divided into two parts(by cylinder),
but pcurves of the second were not shifted during shape healing.
Test cases correction
Fix that face, in which only wire was reordered during shape healing, was not replaced.
Add test case for this fix
Add status for shifted wires in reordering.
Modified test case de/step_1/E3 according to new reference data
