"endl" manipulator for Message_Messenger is renamed to "Message_EndLine".
The following entities from std namespace are now used
with std:: explicitly specified (from Standard_Stream.hxx):
std::istream,std::ostream,std::ofstream,std::ifstream,std::fstream,
std::filebuf,std::streambuf,std::streampos,std::ios,std::cout,std::cerr,
std::cin,std::endl,std::ends,std::flush,std::setw,std::setprecision,
std::hex,std::dec.
Modification in static method BoundedArc of IntStart_SearchOnBoundaries:
add exact intersection of canonical curve-surface (when Func is IntPatch_ArcFunction).
The algorithm has been improved for the cases when the intersection line goes through the cone apex.
<!break>
1. All special points are put to the ALine forcefully (if they are true intersection point). Currently this step has not been implemented yet.
2. Now the tolerance of IntPatch_Point (put into ALine) is computed in order to cover the distance between it and the correspond ALine.
3. Test cases have been created.
4. Procedure of trimming IntAna_Curve has been improved.
5. Criterion when the discriminant of IntAna_Curve can be considered to be equal to 0 has been improved.
6. Methods IntAna_Curve::FindParameter(...) (and IntPatch_ALine::FindParameter(...)) currently returns list of all parameters corresponding the given point (IntAna_Curve can be self-interfered curve). Before the fix, this method always returned only one (randomly chosen) parameter.
7. Interfaces of the following methods have been changed: IntAna_Curve::FindParameter(...), IntPatch_ALine::FindParameter(...), IntPatch_ALine::ChangeVertex(...), IntPatch_SpecialPoints::AddPointOnUorVIso(...), IntPatch_SpecialPoints::AddSingularPole(...), IntPatch_WLineTool::ExtendTwoWLines().
8. Following methods have been added: IntAna_Quadric::SpecialPoints(...), IntPatch_ALineToWLine::GetSectionRadius(...), IntPatch_SpecialPoints::ProcessSphere(...), IntPatch_SpecialPoints::ProcessCone(...), IntPatch_SpecialPoints::GetTangentToIntLineForCone(...).
------------------
1) tests/boolean/volumemaker/C5
tests/boolean/volumemaker/C6
tests/boolean/volumemaker/E7
They are real IMPROVEMENTS. In the FIX (in compare with MASTER), section result between pairs of faces f2&f6 (C5), f3&f7 (C6) and f1&f5 (E7) is closed. Separated test cases have been created in order to focus on the problem with section. Bug #28503 has been fixed.
Correction in test cases.
Macro NO_CXX_EXCEPTION was removed from code.
Method Raise() was replaced by explicit throw statement.
Method Standard_Failure::Caught() was replaced by normal C++mechanism of exception transfer.
Method Standard_Failure::Caught() is deprecated now.
Eliminated empty constructors.
Updated samples.
Eliminate empty method ChangeValue from NCollection_Map class.
Removed not operable methods from NCollection classes.
The root of the problem is incorrect processing of cases when intersection line goes through the apex(es) of sphere. The fix improves this situation. The algorithm is taken from DecomposeResult(...) function (see IntPatch_ImpPrmIntersection.cxx file). Before the fix, faltering steps were done to solve this problem. As result, it worked in some particular cases. Now, its possibilities have been extended significantly.
Following changes have been made in the fix:
1. Class IntPatch_ALineToWLine has been rewritten cardinally. It touches as interfaces of existing methods as adding/removing some methods/fields. Correction touches both cases: going through seam of Cone/Sphere and through pole(s) of sphere. Old interface did not allow making some actions with analytical line (ALine), e.g. splitting it on several Walking-lines (WLine).
2. Restriction-line support has been removed from Implicit-Implicit intersection result (see IntPatch_Intersection::GeomGeomPerfom(...) method). It connects with the fact that the intersection algorithm itself returns precise intersection line in analytical cases (in compare with parametric intersector). Therefore, we do not need in additional (restriction) line.
3. New class IntPatch_SpecialPoints has been added. This class contains methods to add some special points (such as apex of cone, pole of sphere, point on surface boundary etc.) in intersection line (IntPatch_PointLine). It is based on the static functions, which already exist in IntPatch_ImpPrmIntersection.cxx file (these functions have been moved to the new class).
4. Method IntPatch_WLineTool::ExtendTwoWlinesToEachOther(...) has been renamed to IntPatch_WLineTool::ExtendTwoWLines(...). It is connected with changing main idea of the method. Now it allows extending WLine to the surface boundary or to the singular point (if it is possible): cone apex, sphere pole etc. Interface of this method has been corrected, too. At that, old functionality (extending to each other) has been kept. For implementation of this algorithm, new enumeration "IntPatchWT_WLsConnectionType" has been created.
5. Method IntPatch_PointLine::CurvatureRadiusOfIntersLine(...) has been added. See IntPatch_PointLine.hxx for detail information. It allows correct step computing depended on the local curvature of the intersection line. This method uses geometrical properties of intersected surfaces to compute local curvature. Therefore, it can be applied in wide range of cases even if the intersection curve is not represented in explicit form (e.g. in case of param-param-intersection).
6. Method IntSurf::SetPeriod(...) has been created.
7. Additional check has been added in Draft_Modification::Perform() method for better choice of correct fragment of intersection line for processing DRAFT operation.
8. New overload method IntPatch_Point::SetValue() has been added.
9. Some refactoring of the code has been made.
Creation of test case for issue #27431.
---------------------------------------------------------------------------------------------
Some test cases have been adjusted according to their new behavior.
tests\bugs\modalg_4\bug62
It is really IMPROVEMENT (but fortuitous).
tests\bugs\modalg_5\bug25838
The behavior of this test has been reverted to the state before fixing the issue #27341. Main problem has not been fixed in #27341. It was fortuitous improvement.
tests\bugs\moddata_2\bug565
Quality of intersection curve was not checked. And the curve is bad on both MASTER and FIX. Input data are really wrong: plane-like-cone. However, on the MASTER, four intersection curves (the quality is insignificant) are expected. On the fix, not empty intersection result is expected simply.
tests\boolean\volumemaker\A8
Differences in images and CPU is expected. Difference in images is expected to be fixed in the issue #26020. Now, we should apply this behavior.
Much CPU time is spent by IntTools_FaceFace::ComputeTolReached3d(...) and GeomInt_IntSS::BuildPCurves(...) methods calling. These methods are not touched by the algorithm. It is the result of change of intersection curve(s) form. However, the new Curve(s) seems to be valid and can be applied. As result, new behavior can be applied, too.
tests\boolean\volumemaker\F8
tests\boolean\volumemaker\F9
tests\boolean\volumemaker\G5
tests\boolean\volumemaker\G6
CPU difference is expected. Much CPU time is spent by IntPatch_PointLine::CurvatureRadiusOfIntersLine(...) method calling. This method is really new (it does not exist on the MASTER) and is really useful. Therefore, we should apply new behavior.
tests\boolean\volumemaker\G1
CPU difference is expected. Much CPU time is spent by IntTools_WLineTool::DecompositionOfWLine(...) and IntTools_FaceFace::ComputeTolReached3d(...) methods calling. These methods are not touched by the algorithm. It is the result of change of intersection curve(s) form. However, the new Curve(s) seems to be valid and can be applied. As result, new behavior can be applied, too.
tests\bugs\modalg_6\bug26619
Differences in images is expected. The test keeps its BAD status on the FIX. But the result on the fix is nearer to expected than on the MASTER. Issue #27014 is still actual. As before, it is not clear, why the number of entities is different. The number of section curves has not been changed. Interfered entities are the same as on the MASTER.
tests\bugs\modalg_5\bug25319_1(2)
The reason is described in the issue #27896.
Small correction in the test case
AIS_ColorScale, AIS_Dimension - the protected method DrawText()
has been renamed to drawText() to avoid name collisions with macros.
_MSC_VER/_WIN32 misuse has been fixed in several places.
Header <malloc.h> is now included where alloca() is used.
Draw_Window - dllimport flag has been dropped from inline methods.
TKernel - mandatory dependencies Winspool.lib and Psapi.lib
are now linked explicitly (instead of msvc-specific pragma syntax).
CMake scripts - the option -std=c++0x has been replaced by -std=gnu++0x
for mingw to allow extensions (like _wfopen() and others).
The minimum Windows version has been set to _WIN32_WINNT=0x0501.
Invalid options "-z defs" and "-lm" have been dropped for mingw.
Flag --export-all-symbols has been added to CMAKE_SHARED_LINKER_FLAGS
to workaround missing vtable symbols when using mingw.
FreeType is now linked explicitly on Windows.
Draw::Load() - "lib" suffix is now prepended on mingw as well.
Drop redundant declaration of _TINT from OSD_WNT_1.hxx.
NCollection_UtfString::FromLocale() - platform-specific code has been moved to .cxx file.
Draw_BasicCommands - fixed incorrect mingw64 version macros.
genproj, cbp - added workaround for process argument list limits on Windows.
TKSTEP linkage is failing on this platform due to too long list of files.
The list of object files to link is now stored in dedicated file which is passed to gcc.
Option "-z defs" removed from CMake linker options to avoid problems when building with different configurations of VTK on Linux
Some MinGW-specific compiler warnings (potentially uninitialized vars, use of NULL, parentheses in conditional expressions) are fixed (speculatively)
Automatic upgrade of OCCT code by command "occt_upgrade . -nocdl":
- WOK-generated header files from inc and sources from drv are moved to src
- CDL files removed
- All packages are converted to nocdlpack
Macros ending on "DEB" are replaced by OCCT_DEBUG across OCCT code; new macros described in documentation.
Macros starting with DEB are changed to start with "OCCT_DEBUG_".
Some code cleaned.
License statement text corrected; compiler warnings caused by Bison 2.41 disabled for MSVC; a few other compiler warnings on 54-bit Windows eliminated by appropriate type cast
Wrong license statements corrected in several files.
Copyright and license statements added in XSD and GLSL files.
Copyright year updated in some files.
Obsolete documentation files removed from DrawResources.
Fix first subset of warnings (about 100)
- while(1) and similar constructs replaced by for(;;)
- some uninitialized variables corrected
Got rid of Warning C4189: local variable is initialised but not referenced
Corrected mistakes after getting rid of C4189 compiler warning
Corrected some mistakes that led to compiling errors
Fixed test case because of improvement message - removed unnecessary TODO.
Small fix: tabs have been replaced with whitespaces.
Added TODO for Windows platform
removed last TODO
Corrected mistakes, returned some #ifdef DEB code, fixed test case .
Restoring a few places which have been modified too much
Small grammar fix
Deleted unnecessary puts in bugs/end
AdvApp2Var_SysBase::mcrgene_ size reduced from 1000 to 32 elements, and each element reworked into typed structure.
fixed IntAna_Curve.cxx to prevent access to #NAN# SigneSqrtDis
fixed alignment of doubles by 8 bytes, and minor corrections
Minor correction: static const N given more specific name (MAX_ALLOC_NB)
Added QAcommands OCC23952sweep and OCC23952intersect
Added test cases bugs/modalg_5/bug23952_1 bug23952_2
