The parameter defining image width has been added to all figures to improve their layout in PDF documents and tweaked depending on the nature of each image.
Additionally, some minor changes improving image and text layout have been introduced.
Remove temporary added possibility for setting image width automatically for generation of pdf documentation.
Updated destination directory for generated by gendoc proc pdf files.
Added additional option "-update_images_size" for gendoc procedure to update width of images in *.md files during pdf generation for @figure alias.
Documentation was updated to use alias @figure instead of outdated @image
Added support of svg image format in procedure OCCDoc_UpdateImagesSize.
Added generation of overview for product components.
Added generation of products refman/chm for each component.
- New method BRepLib::FindValidRange() has been added. It computes the range of the edge not covered by boundary vertices.
- The algorithm of calculation of valid intersection range in the class IntTools_ShrunkRange has been corrected to use the new method.
- The method BOPTools_AlgoTools::MakeSplitEdge() has been improved to protect against errors in the case of reversed orientation of the input edge.
- Two new Draw commands have been added:
validrange - it calls the new method BRepLib::FindValidRange().
tolsphere - it shows tolerances of vertices by drawing a sphere around each vertex of the shape.
- The test cases "offset shape_type_i_c YE1,YE2" became better. The scripts have been corrected to reflect the new state.
1. The two new methods have been implemented:
a. BOPAlgo_Tools::EdgesToWires - allows creating planar wires from edges.
The input edges may be not shared, but the output wires will be sharing the coinciding vertices and edges.
It is possible to skip the sharing if the input edges are already shared by passing the corresponding flag into the method.
The input edges are expected to be planar, but the method does not check it. Thus, if the input edges are not planar, the output wires will also be not planar.
In general, the output wires will be non-manifold and may contain free vertices.
b. BOPAlgo_Tools::WiresToFaces - allows creating planar faces from the planar wires.
In general, the input wires are non-manifold and may be not closed, but should share the coinciding parts.
The wires located in the same plane and completely included into other wires will create holes in the faces built from bigger wires
These two methods combined allow building faces from set of edges randomly located in 3D space.
2. The DRAW command *edgestofaces* has been implemented.
3. The documentation has been updated with the new section in Modeling Algorithms - Topological Tools.
4. Test cases for the issue.
1. There has been implemented calculation of all possible types of continuity for shared edges:
* G1 is set if tangential planes are the same for connected faces in each control points through the edge;
* C1 is set in addition to G1 conditions if derivatives, orthogonal to the edge on each face, are equal vectors;
* G2 is set in addition to G1 if the centers of principal curvatures are the same for connected faces in each control points through the edge;
* C2 is set in addition to C1 and G2 if directions of principal curvatures are equal;
* CN continuity is set only if both connected faces are based on elementary surfaces (the conditions for this case are similar to C2 continuity).
2. ShapeFix::EncodeRegularity() is merged into BRepLib::EncodeRegularity().
3. Implemented several test cases to check correct handling of regularity.
4. Fix incorrect usage of BRepLib::EncodeRegularity() in BRepBuilderAPI_Sewing.
5. Implement a method for calculation of regularity on the given list of edges.
6. Documentation updates
Now, GeomPlate_BuildPlateSurface accepts base class Adaptor3d_HCurve and of course array of Adaptor3d_HCurve.
Classes GeomPlate_Array1OfHCurveOnSurface and GeomPlate_HArray1OfHCurveOnSurface have been renamed to GeomPlate_Array1OfHCurve and GeomPlate_HArray1OfHCurve correspondingly.
Documentation has been updated.
Correction in documentation.
New topology-preserving offset algorithm has been added. It allows to construct offset shape of build solid.
test cases have been added.
Documentation has been updated to be up to date.
Minor corrections.
Grid is renamed for simplification purposes.
Old constructors are restored with Standard_DEPRECATED macros.
- m-dashes added.
- some other cases of incorrect dash use fixed
- unicode dashes were removed throughout the documentation.
- other comments taken into account.
Technical overview refactored; text duplicating information contained in user guides removed.
Some images are regenerated for better presentation.
Problems with formatting and section tags corrected in user guides.
Fix for bug 23640.
Merging the rest of Technical Overview content into User's Guides.
-Correct UG sections concerning Sewing.
-Correct comments in the code referring to old location of sewing algorithm.
Redesign of Visualisation user guide's structure with some changes in the guide.
Update Draw_test_harness user guide. Added dimension commands to DRAW test harness.
Update of prerequisites and building 3rd party tools sections
Move VIS draw tests to Draw Test Harness section.
Additionally, fix bugs 24117 and 25353.
Correct output of new imaged in PDF in modeling algos guide and errors introduced by bug 24699 in the overview.
Command gendoc improved to:
- generate Reference Manual documentation (OCCT classes reference) with option -refman; option -overview can be used for generation of overview documentation;
- generate PDF documents for all User Guides automatically (for files listed in FILES_PDF.txt);
- check availability of third-party tools (Doxygen, Inkscape etc.) and properly report warnings and errors.
- use templates of configuration files for third-party tools instead of their generation. These template files are located in dox/resources folder
Tcl scripts are moved from dox folder to adm.
Doxygen warnings are eliminated.
Moved all auxilary functions to occaux.tcl.
Fixed Reference manual generation on *nix platform.
Fixed PDF generation on *nix platforms.
unrelated changes: Unused unit OpenCL removed from UDLIST
All articles revised
README revised
comments are allowed in FILES.txt
Add gendoc.sh for Linux
Added option -s to set search engine of the HTML documents
Added 3rdparty_building docs for different platforms
help message removed from bat&sh scripts (left within tcl script)
tableofcontents added for all huge articles;
gendoc.bat doesn't change PATH variable
jpgs converted to pngs and unused pngs removed
logo displaying of pdf files fixed
Automatic detection of OCCT version number added to occtdoc.tcl
OCCT version within pdfs is got from Standard_Version.hxx; copyright changed
pdf generation process removes latex dir now
GIF images converted to PNG in technical_overview;
references fixed (incorrect reference to wok and cdl didn't touch; redundant latex option removed
Tutorial moved from Overview and made top level page
LICENSE.md moved from dox/overview to dox folder
Section related to OCCT building refactored and simplified.
WOK and CDL explicitly declared as deprecated.
building subsection introduced; wok moved to dev guides section;
Requirements and Installation sections were interchanged;
some Unicode characters removed from .md files; \DeclareUnicodeCharacter{00A0}{ } instruction added into refman file
images insertion rolled back to dual html,latex insertion; mainpage now is processed (index.tex);
surplus part of overview has been removed
foundation_classes.md and technical_overview.md updated;
Reviewed step, tobj, xde and partly iges; Corrections in other guides.
Overview installation and requirements changes updated
OCCT documentation (Overview and User Guides) has been converted from MS Word files to text-based MarkDown format and added to OCCT sources, in the new subfolder 'dox'. The HTML and PDF articles can be generated from the sources using Doxygen and MiKTeX. See the file OCCT_Docs_HowTo.md for details on the new documentation system.
This branch includes:
- new folder structure for Open CASCADE documentation
- sources of almost all OCCT User Guides and Overview
- tcl and bat scripts, which allow to generate HTML and PDF articles
