Extrema/Extrema_GenExtCC.gxx - estimation of Lipchitz constant is improved
Extrema_GlobOptFuncCC.cxx - function value is changed
LocOpe/LocOpe_WiresOnShape.cxx - small correction to fix regression
lowalgos/extcc/bug32882 - new test case is added
some test were updated according new behavior of extrema algo
Code related to supporting of single SDR for a non-manifold group, which prevents writing all translation results except the first one, is removed.
SDRs with null used representation object are excluded from writing.
ProjLib/ProjLib_ProjectOnPlane.cxx - formatting
0031661: Modeling Data - Algorithm crashes when projecting parabola or hyperbola to plane
ProjLib/ProjLib_ProjectOnPlane.cxx - building of analytical parabola and hyperbola is added
bugs/moddata_3/bug31661_* - new test cases are added
In STEPCAFControl_Writer::WriteNames, write the names of components
even if the name of the assembly is absent.
In STEPControl_ActorWrite::TransferSubShape, move assembly structure
information to the beginning of the list of results, so that CDSR
information of this assembly became preceding CDSR of any sub shapes.
Improved the processing for the case where Failure flag for the meshing face is set. Specific tests added.
Check triangulation consistency even for shapes with problematic topology given that they are suitable for keeping it.
Get rid of strange code: preliminary check of self-intersections is made on a polygonal representation of a curve, it is able to find possible intersections, but after that it filter out segments neighbor to the pair of non-intersected segments.
Test case de step_4 I1 has been marked BAD, because the self-intersection is treated correctly, but the projection algorithm generates such crooked 2D curve.
Reference data in test cases heal split_angle_advanced ZA5 and ZA6 has been updated, because those shapes have self-intersected edges, which are being detected now.
When creating a fillet, num is calculated via ChFi3d_IndexOfSurfData. If it
returns just the number of entries in surfdata, it can happen that this
value becomes invalid when handling the case "two faces common to the edge
are found". When both components are on an arc, there will be num removed
from the surfdata.
num would then be larger than the number of entries surfdata. The derived
num1 is therefore also incorrect. The subsequent usage of this
value will either:
* Debug build: cause an out of bounds exception in ChangeValue
(`SeqFil.ChangeValue(num)`)
* Release build: cause a segfault when retrieving it via index num1
(`SeqFil(num1)`)
num + num1 must be recalculated after the deletion happens to correctly
calculate the fillet.
Signed-off-by: Charlemagne Lasse <charlemagnelasse@gmail.com>
The PerformIntersectionAtEnd code is currently not handling all the faces
correctly. If it retrieves Face[0] as F, it can happen that the previously
ran code didn't actually retrieve any faces in this array at all.
For example when:
* "if (nface==3)" is true
- "if (!findonf1)" is true (doesn't assign any faces to this array)
- "if (!findonf2)" is true (doesn't assign any faces to this array)
- "if (state == ChFiDS_OnSame)" is not true (because it is
ChFiDS_AllSame)
- "if (findonf1 && !isOnSame1)" cannot be true (see above, but would
handle faces)
- "if (findonf2 && !isOnSame2)" cannot be true (see above, but would
handle faces)
- "if (isOnSame2)" is false (but would also handle faces)
Since no faces were assigned here, F would be a NULL face. As result, the
function will crash when trying to access the Surface behind the face via
`BRep_Tool::Surface(F);`.
While the best approach would be to identify the implementation bug in the
algorithm behind PerformIntersectionAtEnd, a check + exception is used
instead because the actual algorithm is not known.
Signed-off-by: Charlemagne Lasse <charlemagnelasse@gmail.com>
The ChFi3d_IsInFront code is currently not handling all the combinations
correctly. For example, if `if(fd1->IndexOfS2() == fd2->IndexOfS2())` is
true, it can happen that the `TopoDS::Face(DStr.Shape(fd1->Index(jf1)))`
returns a Face with entity == NULL. The subsequent usage of this NULL face
in `BRep_Tool::Parameters( Vtx, face )` will then cause a segfault.
While the best approach would be to identify the implementation bug in the
algorithm behind PChFi3d_IsInFron, a check + exception is used instead
because the actual algorithm is not known.
Signed-off-by: Charlemagne Lasse <charlemagnelasse@gmail.com>
1. Modify method IntPatch_ALineToWLine::MakeWLine: add correction of end points of each line on 2 surfaces if an end point is a pole on a surface.
2. Modify method IntPatch_WLine::ComputeVertexParameters: adjust a point on curve to corresponding vertex the following way: set 3D point as the point of the vertex and 2D points as the points of the point on curve.
Improved the test stability: created 10 iterations of measurements and take the minimum to
minimize the affect of other processes and threads; increased the compare range of
the quarter and the whole of the document load.
Do not limit the normalization factor of the highly anisotropic parametric space when filtering start points in the algorithm of walking line construction.
Additionally check the knots are in the increasing orders when merging two B-spline curves
Add the case of closed, smooth but not periodic surface (unification of faces lying on it if the flag "myConcatBSplines" is true - modify the underlying surface to make it periodic).
A flag not to raise an exception is used on reading of an XCAF document. If such a shape with scaling transformation is stored in the document, it should be read.
- Added getting and setting Material, VisMaterial and Props to XCAFDoc_Editor::Expand.
- Added XCAFDoc_Editor::Extract to transfer part to a new location
- XCAFDoc_Editor::Extract allows to extract a part as a component or simply extract to an empty label with attached colors, layers, materials, vismaterials and props
- Added XCAFDoc_Editor::CloneMetaData to clone shape's attributes to new location
- Added XCAFDoc_Editor::CloneShapeLabel to clone shape to new document
- Added XCAFDoc_DocumentTool::Check*Tool methods to check an existing of an any tool
- Protected against creating a new label for non-existent tools via extract or expand process
move algorithm of obtaining results from function gproject to method ProjLib_CompProjectedCurve::Perform;
fix tolerances in ProjLib_PrjResolve::ProjLib_PrjResolve;
new treatment of myMaxDist;
use extend bounds in approximation;
add test;
test case "bugs modalg_5 bug25980", "bugs modalg_7 bug24185" have been changed according to new behavior.
incmesh - added -prs option to use StdPrs_ToolTriangulatedShape::GetDeflection() as meshing parameters.
vdisplay, XDisplay - added -autoTriangulation option to manage meshing behavior before displaying a shape.
trinfo - added output of meshing parameters.
Fixed broken incmesh syntax usage in several test cases.
Correct local function ReconstructMissedSeam: use copy of existing pcurve for seam edge reconstruction to prevent possible corruption of another edges.
Fixed a problem with handling slashes and apostrophes
Changed cleaning of the 'TEXT' fields of the step entity to direct order w/o removing operations
Changed converting text locale to covert before cleaning directives and specials symbols (all directives and sp. symbols encoded in ASCII[0-125] and haven't any differ with any locals)
Special case, when directives have two slashes before name changed to don't handle directives value and converts as is (combine two slashes as one and write, for example "\\X2\00C3" as "X2\00C3")
Corrected Geom2dConvert_CompCurveToBSplineCurve::Add in Geom2dConvert_CompCurveToBSplineCurve.cxx;
Added the test for this problem;
Corrected "gluing" curves in ProjLib_ProjectedCurve.cxx.
Fixed exception when trying to calculate line and edge normal in methods HLRBRep_Data::OrientOutLine and HLRBRep_Data::OrientOthEdge, added a check for the existence of the normal before subsequent calculations. A correct check for zero derivative, correction of floating point error and division by zero determinant directly in HLRBRep_EdgeFaceTool::CurvatureValue was set.
1. Correct local function TransformPCurves of ShapeUpgrade_UnifySameDomain: take into account the case of seam edge.
2. Correct local function ReconstructMissedSeam of ShapeUpgrade_UnifySameDomain: use previously stored seam edge in some cases.
BRepTools/BRepTools_NurbsConvertModification.cxx -
Checking domain of 2dCurves if surfaces are periodic is improved
tests/bugs/moddata_3/bug32557 - test case added
IntPatch/IntPatch_WLineTool.cxx - adding control of maximal ratio of distances between 3 sequential points.
tests/bugs/modalg_7/bug32569 - new test case added
tests/lowalgos/intss/bug29972_1 test case is modified according new behavior of intersection algorithm
Update information about ON/IN sub-shapes for all touched faces when intersection with shapes of lower types (edges and vertices) complete.
Previously only the faces participating in the Face/Face intersection were updated.
Modified the method void RWStepGeom_RWBSplineSurfaceWithKnotsAndRationalBSplineSurface::ReadStep
Added processing B spline surface with knots and rational B spline surface with empty data in the name field
Added test
BRepTools/BRepTools_WireExplorer.cxx - replace MapOfShape vmap by IndexedMapOfShape
to avoid random behavior of algorithm
bugs/moddata_3/bug30422 - new test case added
Modified the method TopoDSToStep_MakeStepFace::Init
Added processing of degenerate toroidal surfaces, which are the base surfaces of offset surfaces
Added test
0030620: Tests - perf/bop/buildfaces does not match description (broken)
Allow using meaningful parameters for the commands bbop and bapibop:
* common - for Common operation
* fuse - for Fuse operation
* cut - for Cut operation
* tuc/cut21 - for Cut21 operation
* section - for Section operation
Add description for the commands dealing with Boolean/GF/Split operations.
Validate arguments of these commands.
Correct test case perf/bop/buildfaces to perform GF execution in parallel and serial modes - compare the results.
The following classes have been removed as obsolete:
- BRepAlgo_BooleanOperation
- BRepAlgo_Fuse
- BRepAlgo_Cut
- BRepAlgo_Common
- BRepAlgo_Section
The corresponding classes from BRepAlgoAPI package have to be used instead.
Draw commands:
- fuse
- cut
- common
- section/psection
have also been removed as obsolete.
The corresponding commands for modern Boolean operations algorithm (bfuse/bcut/bcommon/bsection) have to be used instead.
Adjustment of the test cases to use the commands for modern algorithm.
